PSC 2410 installation problem

Similar Questions

• PSC 2410 printer problem

  Try to get the PSC 2410 all in 1 printer at work.  It shows flashing 'on' light, animated hourglass icon on the screen, makes noises as if I try to print whenever I turn it on, but does not pull paper.  Sounds stop after 1-2 minutes, but printer remains inadmissible.  This seems to have originated when I accidentally disconnected the USB port while trying to remove a paper jam.  Have tried all the diagnostics, reset the machine by the orientation of the Web site, but no luck.  Goes into the same mode every time I start her if connected to the PC or not.

  I fear that once that happens there is little you can do. The printer had a fatal mistake in the firmware probably due to missed communication, you have described. The only way to try to resolve the problem of the firmware is to do a hard reset. It is not guaranteed to work, but it's the only thing you can try, unfortunately. I've included the steps below. If this does not work, you will need to replace the printer.
  
  To do a hard reset:
  1. make sure that the printer is turned on.
  2. pull on the power cord from the printer.
  3. pull out the power cord from the wall.
  4. wait for 30 seconds.
  5. plug in the printer and turn it on.

• on the use of the printer HP psc 2410 photosmart problem and how tackle his problem.

  I refer to the last printer I bought - the HP psc 2410 all in one Photosmart model

  For the collar of the sixth month, the printer worked fine. But just recently, this printer has started quite annoying: once the printer has been started, the hourglass didn't stop and noice

  not moving part was also quite annoying:

  I had done in different ways, but it could only worked once. But whenever I'm past printer off and restarted the machine, the same error occurred.

  1. I have reinstall the printer driver, swap the USB port - worked once, but fail after I restart the printer

  2. make my computer from Windows Vista system recovery.  It has not yet.

  3. I turned off the main Reuther and modem also power on the computer and restart the power.  It worked once, but the next morning, I again, she didn't.

  4. later approach, I did: I let printer to launch everything first, now it works. But I'm really scared to turn off, I don't know if the same defective would return.

  The printer is in Malaysia. Previously, when devices HP Singapore or even China, there was no this problem. Hope that all users able to

  help or better is for the company to respond to my problem.

  Please see my post about it.

• Problem scanning HP PSC 2410 Photosmart in Windows 8

  I have a HP PSC 2410 Photosmart all in one that I can not scan.  I use a laptop Sony VAIO T series of ultrabook.

  When I push the scan button I get a message 'scan options are not defined. Install or run software of device on the computer. »

  Printer works fine.

  Dear Eric,

  Here is a document which tells you how to scan in Windows 8:

  http://support.HP.com/us-en/document/c03460648

  There is no HP software to configure the scan button.

  I hope you find it useful.

  Greetings.

  If this answer was helpful and clarify or solve your problem, please mark the topic as resolved and click on my next star to indicate a kudo, thank you.

• HP PSC 2410 Photosmart fax and scanning problem

  I have a HP PSC 2410 Photosmart all-in-one I can neither be fax or scan. I deleted the software and recharged using at least 6 times the CD or nothing helps online downloads. HP Director does not show that they are in the system. I use a HP Pavilion dv 5000 portable computer. Never had problems for years and all of a sudden, I realized that I could fax is no longer.

  When I push the scan button I get a message 'scan options are not defined. Install or run software of device on the computer. »

  As I said above, I did or no this result.

  I need help.

  Super Dave,

  I've now solved all my problems.

  I used one of online methods to fix my HP Director and now everything works as it should.

  I REALLY APPRECIATE your help in resolving these issues.

  Thanks again,

  Rich

• PSC 2410 photosmart does not print after installation of OX 10.6 & Lion: message "failure to communicate".

  I just installed Snow Leopard and Lion (10.7.2).

  My hp psc 2410 photosmart printer repeatedly gives me the following message in the queue of the printer:

  Failure to communicate: the computer is no longer able to communicate with your printer. Turn off the printer, check your printer connections and look for errors in the printer and turn on the printer.

  I have deleted all the files of hp of the system library (suggested in an Apple forum), ran from the Apple software updates and recreated the printer queue in the printer preferences and Scan.

  What to do before having to run out and get another printer? Everything that I am interested is in the printing industry;

  analysis on this hp didn't happen for several OS updates.

  I appreciate the help.

  Hi again,

  I'm sorry to hear that the problem persists.

  Please, check the following:

  1. The printer is connected directly to a free port on your Mac OS and not via a Usb hub, extention, a port of Mac keyboard or through any airport base?
  2. Make sure that the cable is not more than 2-3 meters of length and directly connected to the Mac as described above.
  3. Try to switch to a different USB port on your Mac.

  If the problem continues without change, I suggest you try using another USB cable and then check for any progress.

  Although the printer worked fine with the previous Mac OS (as far as I can understand your description), any defective USB may react differently on another OS...

  Please let me know any progress,

  Shlomi

• PSC 2410 photosmart all-in-one PROBLEM

  Hello, hoping someone can help me with this...

  I have a problem with my printer (psc 2410 all in one)

  During a simple formulation document printing, the printer ran out of paper and could not continue printing paper had been completed. I checked for paper jams - there is no. The print job has been cancelled and the printer and turned it over.

  From the market, it seems now stuck - the power button flashing continuously and the display only I get is the 'busy' hourglass icon... no other error messages or beeps. I can hear the printer through movements start, the flow of paper moving and then he seems hang somewhere and made a repetitive thud. This noise stops after about 1 minute and the display and flashing remain.

  I tried the hard reset several times, I even left it the day after. I noticed that the USB cable, jumped, but the printer also shows online on the computer... I tried to a maintenance operation, but he is not letting all through all print jobs. It's happened a few times when starting upwards, but apparently not however resolve no chance this week.

  Any help is greatly appreciated.

  Thank you

  Sam

  The operating system is Windows XP

  Hi samanthapson2,

  Have you thought about upgrading your printer for a newer model. Here is some information that will help you get into a new printer.

  HP trade-in program

  Please contact our technical support at the 800-474-6836. Customer support can also help you to get a new printer. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://www.HP.com/cgi-bin/hpsupport/index.pl

• Not able to find driver Win 7 (64 bit) for printer "hp psc 2410 photosmart all-in-one. pls help

  While I insert the printer USB cable to the laptop, it runs the Windows Live Update automatically and fails in the final task, the installation of the driver. It says "hp psc 2400 series - has failed.

  Then I removed the USB cable, removed the device of "devices and printers", reboot the laptop and then tried to load the driver manually. But in the window "install print driver", I could not able to find the driver for my printer ' hp psc 2410 photosmart all-in-one ' for the operating system of Windows 7 Professional (64 bit) under the "HP" manufactured.

  Can someone help me get this printer driver to use the Win 7 (64-bit) operating system? Thank you.

  Thank you, Sean. It has not solved the problem. Instead, I got to know that this will work with the 'HP Deskjet 6980 series' pilot and his summer work after I chose that one through the configuration of the local printer.

• HP psc 2410 photosmart all-in-in-one analysis options are not defined

  Hello

  I have a PSC 2410 photosmart all-in-one printer and have just changed my desktop (Win 7), I can print ok but when I press the button of san, it says "scanning options are not put install or run device software. The problem is I lost the installation CD and want to know if I can download it from the HP website.?

  Thank you

  Kini1108

  Try here to download your essential software

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=303753

• HP PSC 2410 Photosmart all-in-one printer SLOW printing

  All of a sudden my HP PSC 2410 Photosmart all-in-one printer has started printing very, very, very slowly. If at all. It took almost 30 minutes (1/2 hour) to print only 1 page word document. I am on Windows 7 OS.

  Dialogue problems says everything is fine. An attempt to print a test page was even worse. He printed only the top 1/4 of the race and that it was illegible.

  I ran CrapCleaner, Norton full scan and I was able to print for about a day before the problem returns.

  Help!

  Hey Rainbow7000,

  I also had problems with copy. I noticed that the missing parts were color text or photos. There was no indication that the Tricolor cartridge was low or empty, but I replaced it in any case and VOILA... print is returned to normal and fine everyting.

  I would have thought there would be some am indicator when the cartridge is low, but it was not.

  Thanks anyway.

  RenardB

• Unit Auto-duplex of PSC 2410 Photosmart all-in-one

  I bought a new computer that uses 7 (64 bit) of Windows operating system. I have attached a PSC 2410 Photosmart all-in-one printer. The auto-duplex feature is no longer available, manual duplex printing is available. When this printer was attached to the previous auto-duplex printer unit funtioned perfectly. Only change was to the old unattach & reattach again.

  This problem can be resolved or do I use the manual funtion?

  The duplexer must be activated as described in the "Vista/Wixndows 7 Duplex Printing Troubleshooting Guide".

• How to install a scanner HP psc 2410 Photosmart all-in-one without a disc, please?

  The printer works fine but the scanner does not appear to be connected.

  Hello

  http://h10025.www1.HP.com/ewfrf/wc/product?product=303753&LC=en&cc=us&DLC=en&submit.y=4&submit.x=6&lang=en&cc=us

  the above link has information on your printer model HP psc 2410 Photosmart

  not to mention that other information to download from the link above and read the manual for it

  " How Improve your performance of product´s with details on how to use and maintain.

  Solve a problem

  Having a problem with your product? Find your solution here
   

  ' Manuals Download your product documentation and user guides

• STOPED PRINTING ON HP PSC 2410

  I have a hp dv6700 PC pavilion, it was very although now it is leaving the impression with my HP PSC 2410. I deleted reinstalled and it errors out when you send a file to print. The printer will be fax and copy very well. Cannot print from my laptop. What can I do?

  Hello

  I suggest you try to install the latest drivers for the imprimante4 and check if it helps, here is the link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers

  For more information, see this link:
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  It will be useful.

• Code internet printing HP PSC 2410

  HP PSC 2410 all-in-one

  XP Pro & XP Home - (2 lapstop - same problem with this printer)

  No changes have been made to the XP Home, just installed this printer on the XP Pro laptop and it's printing code.

  Hello

  I see you are having a printing problem of IE. I suggest you to reset the settings of the browser.

  Reset Internet Explorer default settings

  1. open Internet Explorer

  2. click on tools

  3. click on Internet Options

  4. click on the Advanced tab

  5 locate the section reset Internet Explorer settings

  6. click on the reset button

  7. click on Ok

  8. restart Internet Explorer

  Try to print again.  If it prints normally let us know.

• PSC 2410: after the evil power on

  After turning on the device:

  -normal startup begins, then start grinding noise (sounds like grinding gear)

  -hourglass appears

  -' On' light green binks

  -device remains in this State and is unusable (note, grinding sound stops after a few minutes)

  Hey @jcmsw,

  Thanks for getting back to me on this subject. I'm sorry to hear that the steps I provided could not solve your problem.

  At this point, I would recommend contacting the Technical Support queue by phone to explore the additional hardware options. Based on the age of your current printer there is a good chance that you may have the opportunity to upgrade your HP PSC 2410 Photosmart all-in-one printer to a more recent version of this printer at a reduced price.

  HP Technical Support can be reached at the: 800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  It has been a pleasure to work with you. I wish you good luck going forward with this!