Owner/group display on remote server

Similar Questions

• Designation of the owner/group MySql server

  QUESTION: I recently discovered that the MySql server is the owner of all my directories root (see image).  I don't remember having done anything to cause such a transformation will take place.  Until I upgraded to El Capitan, this had never been the case.  It is surely not good.  I am completely baffled.  Can anyone offer an explanation?

  In freedom,.

  Roddy

  

  There is no way that could be possible, as you probably could not even connect to the Mac.

  My guess is that the MySQL server, the user has been somehow given UID = 0 which is root. Alternatively, the operating system determines somehow that UID 0 must be displayed as MySQL server.

  Run this command in a Terminal and look out to see if it has an alias to UID 0.

  dscl. read the users/MySQL\ Server

• SRM 5.5 - the remote server returned an error: (503) server unavailable, could not create SSL/TLS secure channel

  Design:

  2 vCenter VMs version 5.5 on new W2k12. x. related and the same use facilities key SSO (default installation)

  2 x fresh install of the SRM VMs version 5.5

  20 + hosts vSphere 5.5 with DR/HA configured and working. Two dvSwitches (one per site) configured with the groups of port / VLAN work

  Question:

  Installation goes well until I needed to activate the Plugin SRM in vCenter.  Plugin called "Plug-ins available" and I click on the link 'download and install '.

  I had two separate fouls on both servers vCenter, both with same errors if it is compatible.

  Errors:

  (attached file viclient-3 - 000.log)

  The request has been aborted: could not create SSL/TLS secure channel.

  (attached file viclient-3 - 000.log)

  The remote server returned an error: (503) server unavailable

  I guess that the two are linked and probably something with SSO.  Post installation on each server vCenter vCenter, at the level of the vCenter, I added the "Domain Admins" AD Group with all permissions and then properly connected and built the group with this set of credentials.

  I need help to debug this further.

  Thank you

  ************

  < < Updated > >

  Seems the features and functions are NOT present so you don't not sign in as '[email protected]' (SSO account by default for this "basic" configuration)

  But even with this connection, I have noticed that there is NO option in the webclient service, to perform the installation of a vCenter plug-in.  It does not appear in the vSphere Client (see images).

  I also found it weird that the web client to vCenter illustrates SRM roles but the traditional client does not work.

  Maybe it's a clue to the root cause of...

  Post edited by: ArrowSIVAC 2013-10-07 to provide more details and attachments

  Post edited by: ArrowSIVAC, this is related to the case of support for vmware 13384832210 This problem is solved.  Several pieces here. (1) vCenters were installed secretly with local account as own databases, and this is how I usually do things (2) MRS. servers were built as separate virtual machines, VMWare vs guides guess and documents in anticipation of your SRM installation on the same server as vCenter Documentation / Installer is not clarified that you MUST use domain for MRS accounts in the multiplayer linked site facilities and if you do not, the installation is completed without error, but resources will not work. Errors have for client plugin does not work. It was the symptom, the reason was that the SRM service did not work.  The service would not start and only an error in the Windows event log is 'vmware-dr stopped service' is because the connectivity issue of MRS to vCenter hosted the new SQL instance database SRM. The SRM database has been installed on the instance of vCenter server as vCenter database.  And just like the installation of default vCenter I chose localhost\administrator for database owner.  The database was filled with tables, but SRM has connectivity problems.   The fix for this was to add "domain\user" (called mine SRMAdmin and added as a member of domain admin), add this user in SQL in the list of database users and then promoted as the owner of SRM database and define the rights on DBO. This fixed the first issue. Second issue was that SRM installation set the DSN system identification information, but does not specify that they must also be domain based accounts.  The installation program is not not clear here and should only allow user domain\username when installing. After several attempts because of the root and installation methods different tried, how to get the installation complete and properly configure was to log on to the system AS the example domain account: domain\srmadmin = > Configuration System DSN by selecting "How should SQL Server verify the authenticity of the login ID?"  "with integrated Windows authentication', and then the installation of SRM to the"Enter Database user credentials"value"domain\srmadmin ".  Then and communication services to the vCenter SRM hosted DB database will work correctly. < See images attached benchmarks >

  attached files

• Individual images WVC80N FTP on an interval defined by the user to a remote server does

  Hello

  I'm shopping for a wireless webcam to provide periodic fixed images that are accessible via any web browser. I'm not interested in live streaming video, or what I must have remote users to directly access the camera.

  I currently own a Panasonic BL-C131A that performs the necessary function well. I set it up to send a simple jpeg image to a remote server every 60 seconds (assigning the same file name each time). My web site (http://www.creston-community.com/Public/Webcam.html) has a page that displays the uploaded image, i.e. the .jpg file, in the same interval. Of course, whenever the web page pulls the top of the file, it contains a more recent image this file contained on the previous cycle.

  I need a second camera, but Panasonic is expensive. I seems that maybe the WVC80N could be an alternative to a price much lower. However, I have reviewed the user for the WVC80N guide and the only mention of ftp of it lies in the section dealing with motion detection. Can someone tell me if the camera can do what I ask, independent of any movement detection settings? If Yes, can I specify jpeg as the file type, set a preferred file name that will be assigned to each image and set the frequency (interval) between ftp downloads?

  Thanks for any information anyone can provide. !

  The WVC80n doesn't have the specific feature you are looking for, not exactly.

  However, it can achieve the desired result in a different way.

  The willing WVC80n of a CGI interface that your web server could pull left to draw the image, instead of the camera by pressing the image.

  In other words, you can set a timer for one minute on the web server to retrieve a single image of the WVC80n jpeg and save it like that.

  http://usernameassword@wvc80n-deviceort/img/snapshot.cgi?size=3&quality=1

  The URL above may also be directly mandated by your web server.

• connect to the remote server

  Hello friend

  Pls help
  Given below to other site, ip address of the server 172.16.5.10 and public IP address 41.59.251.X, I need to create the tunnel so that my
  Server with the ip 172.17.18.41 and my public IP 41.59.251.Y must be able to communicate with the remote server which is

  172.16.5.10
  What is the way forward? my server ip address 172.17.18.41 mask 255.255.255.33

  -3des encryption
  -Md5 hash
  -Preshared authentication
  -Group 2
  Pre-shared key 66@#fgk
  -Public IP 41.59.251.X
  -ip address of the server 172.16.5.10 (he is 27 subnet)

  Is what I want to implement, help the routing between two networks and access-list for only two servers to talk to pls

  crypto ISAKMP policy 30
  BA 3des
  md5 hash
  preshared authentication
  Group 2
  ISAKMP crypto key 66@#fgk address 41.59.251.X
  Crypto ipsec transform-set STRONG esp-3des esp-md5-hmac
  JOE 30 ipsec-isakmp crypto map
  set of peer 41.59.251.X
  86400 seconds, life of security association set
  transformation-STRONG game
  PFS group2 Set
  match address 140

  access-list allow 140
  IP route

  interface GigabitEthernet0/1
  Description CONNECTION to ISP
  IP 10.17.50.1 255.255.255.252
  IP virtual-reassembly
  automatic duplex
  automatic speed
  JOE crypto card

  Joe

  En to encrypt traffic must match the access list, and it must match the list of access on the other side.

  The easiest would be to ask the person manageing the router on the other side to send you the configuration, otherwise it's just a guess how this access list must be configured.

• Remote Server Administration tool

  Try to install the Administration tool of remote server on my laptop with Windows 7 Home Premium SP1 installed. Down loads OK, but when he tries to install and update with windows update stand-alone install all I get is "update is not applicable to your computer. Now, the update indicates that it should install on a computer that has installed regardless of the version of windows SP1 and I'm trying to display the Active Directory on my laptop. I read some other blogs that you say have to uninstall SP1 and then install the RSAT and then reinstall SP1, I don't want to do that. There should be an easier way to get this installed. Any help would be appreciated.

  Thank you
  Curt
  P.S. new user of this blog.

  The requirements for the installation says that only versions with the company, the Professional Edition and ultimate edition of windows 7 or windows 7 with SP1. Now my question the part that says "or windows 7 with SP1" means any version of windows or does this mean that the versions business, professional and ultimate edition with SP1 is installed.

  It is said very clearly. It can be installed on the Professional editions, publishing full and business Windows 7, with or without SP1.

  The wording to http://technet.microsoft.com/en-in/library/ee449475 (v = ws.10) .aspx is even clearer: "for Windows 7 Remote Server Administration tools can be installed on computers running editions professional, enterprise or ultimate edition of Windows 7"

  I find on the Internet, in particular Microsoft sites nothing that says it can be installed on any edition as it has SP1.

• Create different group with VPN remote access

  Hello world

  The last time, I ve put in place a VPN for remote access to my network with ASA 5510

  I ve access to all my internal LAn helped with my VPN

  But I want to set up a vpn group in the CLI for a different group of the user who accesses the different server or a different network on my local network.

  Example: computer group - access to 10.70.5.X network

  Group consultant network - access to 10.70.10.X

  I need to know how I can do this, and if you can give me some example script to complete this

  Here is my configuration:

  ASA Version 8.0 (2)
  !
  ASA-Vidrul host name
  vidrul domain name - ao.com
  activate 8Ry2YjIyt7RRXU24 encrypted password
  names of
  DNS-guard
  !
  interface Ethernet0/0
  nameif outside
  security-level 0
  address IP X.X.X.X 255.255.255.X
  !
  interface Ethernet0/1
  nameif inside
  security-level 100
  address IP X.X.X.X 255.255.255.X
  !
  interface Ethernet0/2
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface Ethernet0/3
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface Management0/0
  Description Port_Device_Management
  nameif management
  security-level 99
  address IP X.X.X.X 255.255.255.X
  management only
  !
  2KFQnbNIdI.2KYOU encrypted passwd
  passive FTP mode
  DNS server-group DefaultDNS
  vidrul domain name - ao.com
  access-list 100 scope ip allow a whole
  access-list extended 100 permit icmp any any echo
  access-list extended 100 permit icmp any any echo response
  vpn-vidrul_splitTunnelAcl permit 10.70.1.0 access list standard 255.255.255.0
  vpn-vidrul_splitTunnelAcl permit 10.70.99.0 access list standard 255.255.255.0
  inside_nat0_outbound list of allowed ip extended access all 10.70.255.0 255.255.255.0
  pager lines 24
  Outside 1500 MTU
  Within 1500 MTU
  MTU 1500 management
  IP local pool clientvpngroup 10.70.255.100 - 10.70.255.200 mask 255.255.255.0
  ICMP unreachable rate-limit 1 burst-size 1
  ASDM image disk0: / asdm - 602.bin
  don't allow no asdm history
  ARP timeout 14400
  Global 1 interface (outside)
  NAT (inside) 0-list of access inside_nat0_outbound
  NAT (inside) 1 10.70.0.0 255.255.0.0
  Access-group 100 in the interface inside
  Access-group 100 interface inside

  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout, uauth 0:05:00 absolute
  dynamic-access-policy-registration DfltAccessPolicy
  Protocol RADIUS AAA-server 10.70.99.10
  AAA authentication enable LOCAL console
  the ssh LOCAL console AAA authentication
  LOCAL AAA authorization command
  Enable http server
  http 192.168.1.2 255.255.255.255 management
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
  Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
  SYSTEM_DEFAULT_CRYPTO_MAP game 65535 dynamic-map crypto transform-set ESP-DES-SHA ESP-DES-MD5
  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
  outside_map interface card crypto outside
  crypto ISAKMP allow outside
  crypto ISAKMP policy 10
  preshared authentication
  the Encryption
  md5 hash
  Group 2
  life 86400
  Crypto isakmp nat-traversal 30
  Telnet 0.0.0.0 0.0.0.0 inside
  Telnet timeout 5
  SSH 0.0.0.0 0.0.0.0 outdoors
  SSH timeout 5
  Console timeout 0
  outside access management
  dhcpd manage 192.168.1.2 - 192.168.1.5
  dhcpd enable management
  !
  a basic threat threat detection
  Statistics-list of access threat detection
  !
  class-map inspection_default
  match default-inspection-traffic
  block-url-class of the class-map
  class-map imblock
  match any
  class-map P2P
  game port tcp eq www
  !
  !
  type of policy-card inspect dns migrated_dns_map_1
  parameters
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the migrated_dns_map_1 dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the netbios
  inspect the rsh
  inspect the rtsp
  inspect the skinny
  inspect esmtp
  inspect sqlnet
  inspect sunrpc
  inspect the tftp
  inspect the sip
  inspect xdmcp
  Policy-map IM_P2P
  class imblock
  class P2P
  !
  global service-policy global_policy
  vpn-vidrul group policy internal
  vpn-vidrul group policy attributes
  Protocol-tunnel-VPN IPSec
  Split-tunnel-policy tunnelspecified
  Split-tunnel-network-list value vpn-vidrul_splitTunnelAcl
  value by default-field vidrul - ao.com
  test 274Y4GRAbNElaCoV of encrypted password privilege 0 username
  username admin privilege 15 encrypted password bTpUzgLxalekyhxQ
  attributes of user admin name
  Strategy-Group-VPN-vpn-vidrul
  username, password suporte zjQEaX/fm0NjEp4k encrypted privilege 15
  type tunnel-group vidrul-vpn remote access
  vpn-vidrul general-attributes tunnel-group
  address clientvpngroup pool
  Group Policy - by default-vpn-vidrul
  IPSec-vpn-vidrul tunnel group attributes
  pre-shared-key *.
  context of prompt hostname
  Cryptochecksum:d84e64c87cc5b263c84567e22400591c
  : end

  What you need to configure is to imitate the configuration on the tunnel-group and group strategy and to configure access to specific network you need.

  Currently, you have configured the following:

  vpn-vidrul group policy internal
  vpn-vidrul group policy attributes
  Protocol-tunnel-VPN IPSec
  Split-tunnel-policy tunnelspecified
  Split-tunnel-network-list value vpn-vidrul_splitTunnelAcl
  value by default-field vidrul - ao.com

  type tunnel-group vidrul-vpn remote access
  vpn-vidrul general-attributes tunnel-group
  address clientvpngroup pool
  Group Policy - by default-vpn-vidrul
  IPSec-vpn-vidrul tunnel group attributes
  pre-shared-key *.

  What you need is to create new group policy and the new tunnel-group and configure the tunnel split ACL to allow access to specific access required.

  The user must then connect with the new group name and the new pre-shared key (password).

  Hope that helps.

• Unable to display the remote folder: the remote folder F:/wamp/www / "MYWEBSITENAME" / is not accessible or does not exist.

  In CS4, all of a sudden, I get the error "unable to display the remote folder: the remote folder F:/wamp/www /"MYWEBSITENAME"/ is not accessible or does not exist.»

  I'm in Manage Sites and test the file in the remote folder and it says "Dreamweaver connected to your web service successfully.

  I have not changed anything.  I had this once before a few years ago and just copied on the site of a new name and that fixed it, but it does not for the moment.

  Help.   Any ideas?  Thank you

  When you click the expand button in your files window, whose icon is selected in the upper part?

  

  The middle one is the test server (list of lightning bolt), if you try to download, you will need to switch to the remote server (standard search bullet list icon).

  If you do not have a local server running on a drive of F, and you try to put it on the test server, you will get an error saying: there is no. Is it happening?

  If you do not have a local server running on your F drive, remove the test server info, it is not necessary.

• When I try to connect to my remote server the message "an ftp error occurred - cannot establish a connection to the host." How can I get the server to which to connect with dreamweaver?

  When I try to connect to my remote server the message "an ftp error occurred - cannot establish a connection to the host." How can I get the server to which to connect with dreamweaver?

  After spending most of the day on this I found that my password required to upgrade... so two of my sites are now meet Dreamweaver. And the other will be taken care by the owner of the Web site. Thank you, Nancy!

  gay

• CSS style sheet appears on the remote server when I download my Web site, but it works very well to the local server

  CSS style sheet appears on the remote server when I download my Web site, but it works very well to the local server, if anyone can help I would be grateful.

  There are major problems with this page as shown in the screenshot below.

  

  This is caused by a liberal hijacking of APDivs (aka layers) for a main page layout.  This isn't what APDivs were intended.  That's why Adobe them removed from DW.  Unfortunately, not soon enough.

  I think you're the best option is to start over with a pre-built CSS layout that doesn't contain positioned elements.

  Either way, Flash is dead now.  Most of the people cannot display Flash media more.  You can convert the HTML5 video or use YouTube to host videos now.

  Nancy O.

• What remote server I connect too

  Hi all

  One thing has always confused me with DW. I often have to build a site on my development server, "blocked" from google. Then it goes live I have to test a new remote server.

  How will I know which of the two the distance I log in when I press the button "connect"?

  Thank you

  When you place your cursor on the button to connect, it displays the name of the server that is connected. You can set several remote servers in "manage sites", but only is active at a time.

• To download to the remote server using FlashFXP: new images will not upload. [was: Question]

  I use Dreamweaver CS4 in my school.  We create the Web site using a local drive and use FlashFXP to upload to a remote server.  Suddenly, the new images we have inserted on the site will not transfer.  The show upward in mode live view and when test us them in different browsers, but will not transfer out of the queue and will be not displayed on the Web site.  It is only with the new images we have created; Download all the old images.  Something is corrupt in our records, our code, or is FlashFXP?

  This looks like a problem with permissions on the server.

  Looks like that is not allowing you to replace the files that already exist.

• Folder on the remote server that is not recognized by Dreamweaver as part of the site

  I run the site of a school district. This includes the home pages and associated pages for all but one of our schools. School files were headed by a teacher of this school's web design. This professor has left, and I was asked to perform some updates on the site from high school up to what a new teacher was hired and able to take charge. My problem is that the folder containing all the files of high schools is one of the many issues in the Group of largest school district, the folders on the remote server, my Dreamweaver does not see. I can use Windows Explorer to find the folder and it's there. I can use a tool such as Notepad ++ to open the files and make changes. They are here and I can visit her profile. But for some reason any Dreamweaver doesn't recognize them not as part of my site. I can't 'get' file, or a synchronization because Dreamweaver does not see this folder on the remote server. I think it's a matter of Dreamweaver, but I don't know how to fix it.

  Thanks for all your suggestions. I'm home now and remembering that I'm working on the site of the House and at work, I realized that I can see the folder of the secondary school on the remote server of the House where I have Dreamweaver to connect via FTP. I can't see it on my computer at work where I connect to the remote server through a local/network connection. There may be a clue here. If I switch to a FTP connection to work, maybe I see the folder.

  UPDATE: I changed the type of connection on my computer work of local/network, FTP and high school record is now visible on the remote control. Don't know why it makes a difference, or if this will lead to new questions, but I'm good for now.

• How Exchange View screen between local files and remote server?

  I just need to know how to switch the display between local files and remote server, I want my files the on the left and the remote server on the right.  I had it set up before, but just got a new computer and can not remember how I did it.

  Its OK, I found it. Thank you

• no remote server showing PHP

  Hello

  created a test page at

  http://www.xm496.com/test.php

  the page contains the following code:

  < ! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""

  " < html xmlns =" http://www.w3.org/1999/xhtml ">

  < head >

  < meta http-equiv = "Content-Type" content = text/html"; charset = utf-8 "/ >"

  < title > Untitled Document < /title >

  < / head >

  < body >

  < class p = 'copyright' >

  <? PHP

  $startYear = 2003;

  $thisYear = date ('Y');

  If ($startYear == $thisYear) {echo $startYear ;}

  else {echo "$startYear - $thisYear" ;}?} >

  & copy; "All rights reserved < a href ="http://www.xm496.com"> the Bristol Britannia Preservation Society < /a > XM496 and < a href ="http://www.edwards-micros.co.uk"> Microphones Edwards < /a > < /p > .

  < br / >

  < br / >

  <? PHP include("_includes\copyright.php");? >

  < / body >

  < / html >

  On my local test server - Wamp I see two copyright messages

  On my remote server I see one it seems that the include is not executed.

  If I find the online source then the include is not displayed

  Someone has any ideas whats going on

  Thank you

  Ian

  a back slash?

  Wouldn't be a slash: