To download to the remote server using FlashFXP: new images will not upload. [was: Question]

Similar Questions

• SFTP a file on the remote server using ODI

  Hello

  I have my ODI client on windows and you have created a file on remote unix server using autonomous agent.

  I need to move the file from unix server to the location of sftp. I think that this should be possible, as I am to short odisftpput tool using autonomous agent of the unix to windows server.

  However the execution fails saying not able to connect to SFTP server.

  I have cross checked connection sftp unix manually, that works.

  Please add entries / suggestions on this subject.

  Thank you

  Vinay

  Hi Vinay

  When the STRICT_HOSTKEY_CHECKING is set to YES, the authentication is performed for this remote SSH host key in the file specified in the KNOWNHOSTS_FILE parameter. The Known_Hosts file contains the keys of all remote computers host that the user trusts. If this argument is missing, then the /.ssh/Known_hosts file is used as the Known_Hosts file if it exists.

  Check with your administrator for this info. Also once run the sftp while setting on no. STRICT_HOSTKEY_CHECKING.

  Concerning

  Christian love

• not be able to collect some Logs Errror: unable to connect to the remote server

  I'm trying to collect Diagnostic information requested of VMWARE and I get an error message

  Error state HOME

  Complete XX.XX.XX.xx

  Complete XX.XX.XX.xx

  YY.yy.yy.yy could not connect to the remote server

  YY.yy.yy.yy could not connect to the remote server

  Bundle of newspaper has not YY.yy.yy.yy has not generated

  VCenter Server full

  VMware Vsphere Client full

  I don't know their reasoning for this, but it seems like a pain in the thigh. Why not just export logs with the vSphere Client? File-> Export-> Export System Logs

  Or

  Use the help wizard that will allow you to collect and automatically download newspapers in vSphere?

  http://www.VMware.com/products/Datacenter-Virtualization/vCenter-support-assistant/overview.html

• Windows Media Center - not the initial download put in place data for guide "unable to connect to the remote server.

  Hello

  Looking for help on this one...

  I have a new install of windows 7 pro running, and I was not able to get the guide to download Windows Media Center.   I am up-to-date with all the updates and SP1 version running.   My video card drivers are also updated.

  I use HDHOMERUN PRIME equipment with cablecard and who receives a TV signal very well and I am able to view it in WMC.    I use Verizon FIOS and my zip code is 07452.    Before this computer, I ran the cablecard even with a ceton infinitv and had no problem Guide at all.

  It's just that I can't download the guide data.  Its just totally blank.   I receive the channels and view them, but there is NO data.      Whenever I run the TV setup the same question comes up.  Cannot download the initial configuration data due to the error of previous download.   As far as I know, there is NO error message when Windows installed... actually... I reinstalled windows completely and this has not solved the problem.    I tried to manually download the guide which did not help.   It... nothing happened when I turned 'on' and 'off' WMC in Control Panel to reinstall.  I even tried explore the ehome folder and remove the file db... but nothing is helping.

  I can't find a file mcupdate.exe light on my system - don't know if this is relevant.   When I looked in the event viewer here are some of the error messages that I see.

  Impossible to extract the EpgLineups (error: unable to connect to the remote server)
  Impossible to extract the MCEClientUX (error: unable to connect to the remote server)

  I'm starting to think it's a matter of windows.   Anyone have any ideas?

  Mark

  E-mail address is removed from the privacy *.

  On Tuesday, September 23, 2014 00:32:35 + 0000, Mark_Sap_70 wrote:
   
  > I'm starting to think it's a matter of windows.   Anyone have any ideas?
   
  See this thread
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/is-the-Media-Center-Guide-download-service-down/f0a5ae10-00ea-4635-9177-12074fa7ee81?msgId=87f3f3b5-A485-4c41-8f35-43a4e2a75d7c
   
   
   
  __________________________________________________________________________________________________
  Barb
  MVP Windows Entertainment and connected home
  My Blog - http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   

• Select the remote server to download files.

  With the help of CS5.5 I am unable to put files on my test server, except if the remote server is selected. He said: "before using this feature, you must set up a remote server. You want to book one now? ".

  If I check the remote server, I am able to upload files to the test server, also download the remote server that is BAD, I'm just testing and redesigning the site.

  I found another thread saying to remove the site, I did; Nothing helps.

  If I do not select a remote server I'm unable to download and to remodel the site.

  How do you have on this?

  Managed to fix it I made my server under servers model > advanced > server model has been configured for PHP MySQL.

• CSS style sheet appears on the remote server when I download my Web site, but it works very well to the local server

  CSS style sheet appears on the remote server when I download my Web site, but it works very well to the local server, if anyone can help I would be grateful.

  There are major problems with this page as shown in the screenshot below.

  

  This is caused by a liberal hijacking of APDivs (aka layers) for a main page layout.  This isn't what APDivs were intended.  That's why Adobe them removed from DW.  Unfortunately, not soon enough.

  I think you're the best option is to start over with a pre-built CSS layout that doesn't contain positioned elements.

  Either way, Flash is dead now.  Most of the people cannot display Flash media more.  You can convert the HTML5 video or use YouTube to host videos now.

  Nancy O.

• SRM 5.5 - the remote server returned an error: (503) server unavailable, could not create SSL/TLS secure channel

  Design:

  2 vCenter VMs version 5.5 on new W2k12. x. related and the same use facilities key SSO (default installation)

  2 x fresh install of the SRM VMs version 5.5

  20 + hosts vSphere 5.5 with DR/HA configured and working. Two dvSwitches (one per site) configured with the groups of port / VLAN work

  Question:

  Installation goes well until I needed to activate the Plugin SRM in vCenter.  Plugin called "Plug-ins available" and I click on the link 'download and install '.

  I had two separate fouls on both servers vCenter, both with same errors if it is compatible.

  Errors:

  (attached file viclient-3 - 000.log)

  The request has been aborted: could not create SSL/TLS secure channel.

  (attached file viclient-3 - 000.log)

  The remote server returned an error: (503) server unavailable

  I guess that the two are linked and probably something with SSO.  Post installation on each server vCenter vCenter, at the level of the vCenter, I added the "Domain Admins" AD Group with all permissions and then properly connected and built the group with this set of credentials.

  I need help to debug this further.

  Thank you

  ************

  < < Updated > >

  Seems the features and functions are NOT present so you don't not sign in as '[email protected]' (SSO account by default for this "basic" configuration)

  But even with this connection, I have noticed that there is NO option in the webclient service, to perform the installation of a vCenter plug-in.  It does not appear in the vSphere Client (see images).

  I also found it weird that the web client to vCenter illustrates SRM roles but the traditional client does not work.

  Maybe it's a clue to the root cause of...

  Post edited by: ArrowSIVAC 2013-10-07 to provide more details and attachments

  Post edited by: ArrowSIVAC, this is related to the case of support for vmware 13384832210 This problem is solved.  Several pieces here. (1) vCenters were installed secretly with local account as own databases, and this is how I usually do things (2) MRS. servers were built as separate virtual machines, VMWare vs guides guess and documents in anticipation of your SRM installation on the same server as vCenter Documentation / Installer is not clarified that you MUST use domain for MRS accounts in the multiplayer linked site facilities and if you do not, the installation is completed without error, but resources will not work. Errors have for client plugin does not work. It was the symptom, the reason was that the SRM service did not work.  The service would not start and only an error in the Windows event log is 'vmware-dr stopped service' is because the connectivity issue of MRS to vCenter hosted the new SQL instance database SRM. The SRM database has been installed on the instance of vCenter server as vCenter database.  And just like the installation of default vCenter I chose localhost\administrator for database owner.  The database was filled with tables, but SRM has connectivity problems.   The fix for this was to add "domain\user" (called mine SRMAdmin and added as a member of domain admin), add this user in SQL in the list of database users and then promoted as the owner of SRM database and define the rights on DBO. This fixed the first issue. Second issue was that SRM installation set the DSN system identification information, but does not specify that they must also be domain based accounts.  The installation program is not not clear here and should only allow user domain\username when installing. After several attempts because of the root and installation methods different tried, how to get the installation complete and properly configure was to log on to the system AS the example domain account: domain\srmadmin = > Configuration System DSN by selecting "How should SQL Server verify the authenticity of the login ID?"  "with integrated Windows authentication', and then the installation of SRM to the"Enter Database user credentials"value"domain\srmadmin ".  Then and communication services to the vCenter SRM hosted DB database will work correctly. < See images attached benchmarks >

  attached files

• Stop and restart the virtual machines in the remote server

  I need to close virtual machines running guests 4 1 ESX from a remote server (IBM System i).

  The remote server in fact control the storage used by ESX and VM OS, so I'll have to scripts running on the remote server that:

  Stop the virtual machine

  Performs maintenance

  Reboot the virtual machine

  I tried to understand the big picture of the reading discussions here, but I'm still confused.

  VMA is to provide the best way for the virtual machines of withdrawal from a script running on a remote server?

  Scripts can I use SSH to connect to the vSphere environment to run scripts or issue the command?

  Thank you.

  vCLI (really its vSphere SDK for Perl), PowerCLI, VI Java, etc are all vSphere SDK to correct and they are a of the client-side bindings different scripts and programming languages which bind to the vSphere API. When I say 'API', I mean using one of these SDK is you use the vSphere API to perform the work.

  The SDK is initiated on the remote server, this can be windows, linux, etc as long as it supports one of these boxes to tools. In general, for admins, you will use either vCLI (vSphere SDK for Perl) that supports Linux and Windows, or if you are more windows-oriented, you can use PowerCLI.

  Documentation has been referenced in my first post, please take some time the documents because they provide much more detail on the use cases for each + a lot of examples with orders. Yet once, there no involved SSH if you use the vSphere API. As I told, vMA is a virtual appliance, you can download and start using if you do not want to install vCLI or PowerCLI on a remote system, this is assuming that you are comfortable in a Linux environment. If you're not, then I highly recommend using PowerCLI, who will need a remote server for Windows.

  Here are a few started getting additional resources:

  vSphere SDK for Perl + vMA:

  Getting started with vSphere SDK for Perl

  Introduction to the vMA (tips/tricks)

  PowerCLI:

  http://www.VMware.com/support/developer/windowstoolkit/

  http://www.virtu-al.NET/2009/11/10/PowerCLI-where-do-i-start/

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• Configure the remote server and test

  I installed Dreamweaver CS 6 and 10 CF and MS SQL server on the same computer.

  I use Dreamweaver CS 6 to create a test web site and to set up the remote and testing server.

  Dreamweaver invite me to enter the host name and the full directory.

  I would like to know what I need to enter information?

  hostname is localhost?

  complete diretory will C:\inetpub\wwwroot or C:\ColdFusion10\cfusion\wwwroot?

  Your information and your help is much appreciated,

  Kind regards

  iccsi,

  Iccsi,

  Yes. Host name to the title of "Test Server" is the hostname of the server test - in your case, since you're using CF, it must be the path in which CF works. It will be localhost:8888 or something similar - depending on what port you have configured for the webroot when installing CF. you could check in CF dashboard. Or, you could start CF server, open your browser, enter localhost. If the loading of the page Web of the CF by default, it's just localhost. If this isn't the case, add the port number.

  The remote server is your real Web server. It may be http://www.somesite.com or if you run it in a separate folder within your main site, it will be http://www.somesite.com/test - depends on you want to download the files of remote work.

  The complete directory under local configuration is the place where your files are located on your local system. Still, if you use CF, you can thus use CF webroot to create / store files - this way, you don't have to make copies of files in 2 places since that you configure the same folder as your test server too.

  -ST

• Watch is not on the remote server.

  I created a simple animation and it works very well on my local server, but although I have downloaded with all the files to the remote server, I do not see the animation!

  Any thoughts as to why not?

  I used the SVG as my images imported; could be the problem? As I say, it works locally but not remotely.

  http://www.emaress.co.UK

  Thank you.

  Don't worry, I did a test with a static svg image and it does not show, so I guess that svg compatibility is not implemented on the remote server.

  Back to the drawing board and

• Help! Save on the remote server has broken links to images

  Well, I (now) know it was a stupid thing to do - but surely there must be an easy way to fix... !?

  I usually have to 'PUT' html on the remote server files, once they have been registered locally. But I keep frustrated all dependency files you download, then... I "discovered" the 'SAVE to REMOTE SERVER' command, and this allows to save my file html directly to the server. I was asked if I wanted to update all the links - and I clicked on YES (doh!)

  Now all my images and links are broken.

  I know it's just a single page-, but it contains a number of links and images. Also, this page uses a template and the images/links from the model content in a file are also broken. (The actual model file and all the other pages of the site are okay)

  'Undo' didn't work

  Does anyone know a quick way to solve this problem?

  I'm using Macromedia Dreamweaver MX 2004

  MANY thanks in advance,

  Rich

  Go in Edition > Preferences > Site >

  Under dependent files, you must have two checkmarks.

  In this way, that you will be asked each time to say YES or NO to the dependent files.

  I hope this helps.

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB
  http://ALT-Web.blogspot.com

• shopping cart will not be rendered on the remote server

  Build a basket using dreamweaver cs4 and eCart4 of Web help

  built a product page, the details of the page and the shopping cart page. not finished with the payment pages.

  works fine on my test server, but when I downloaded to a remote server, the pages won't get in any browser.

  I don't know if it's a problem of coding or a setting on my remote server which is incorrect.

  If it was a coding problem, I think I would get the same since the testing server?

  product page is

  http://www.markwatsoncarvings.com/canes.php

  If I need to join the code, please let me know.

  Thanks for your help,

  Jim balthrop

  Hi Jim,.

  as these forums are based on the Adobe Dreamweaver Developer Toolbox (MEASURE) - extension and its use, I suggest you post your question in the WebAssist product forums.

  See you soon,.

  Günter

• FTP adapter: Not picking not the file on the remote server

  Hello
  
  I use the FTP adapter to read the file from the remote server and file ra.xml - oc4j configured with good host, port, username and password.
  
  Once I have deployed my process, no instance of this process is created and remote directory entry file is not picked up.
  
  Please help on this issue. Thanks in advance.

  Just checking that you can send via ftp manually from the BPEL server.

  Looks like you can use the ra.xml - oc4j wrong file.

  Also in your BPEL project, take a look on the link partner FTP and see the JNDI location, it will look something like eis/Ftp/sample.

  This may be what you want to rename, generally good naming practices puts the server, for example Ftp/ist/FtpAdapter

  To make sure that you have configured the file ra.xml - correct oc4j we can check through the Manager of the company, even though Marc has specified the correct location.

  EM-> oc4j_soa-> Applications-> Drop down choice list autonomous resource adapters-> FtpAdapter-> connection Pools

  Select the JNDI name, you indicated in your BPEL process, if there is no create a.

  Create connections as needed.

  Also a hint is to start with the base directory, for example when you connect by ftp manually, it will be where you load the files. In your configuration / (oc4j - RA.Xml) is the place of departure and / is the physical or logical path. Download this work so that you know that you have the right connection. Then start working on the location of the directory.

  see you soon
  James

• What are the network requirements for the remote server of the Panel?

  What are the network requirements for the remote server of the Panel?

  I tried for awhile now to set up a Control Board.  I can connect to my remote panel of computers from other computers on my local network but nowhere else.

  Whenever I use web publishing tool gives me a URL in this format: Http://Computer-Name.Corporate-Name.local:8086 / VI - nom.html apparently it means I have a local DNS server and this URL is meaningless to the public.

  When I try to connect with the Operate > Connect to... remote control, I get this error message:

  "Connection to Server remote panel...".
  "Connection refused by the server remote control specified: make sure that the LabVIEW Web server is enabled on the specified server.

  I got the same error when I tried to host a remote panel from my laptop at home, on my Wi - Fi.  Is there some network settings or firewall I'm not seting?  Would it be my server or the router or the private network?

  My goal is to be able to host remote panels of my laptop while I'm on the international scene, creating using 4 G internet mobile.  Is it still feasible?

  As he Turners on my router had to be put in place so that my Port is in the rage of transfer.  Also I had to disable DHCP.  Without that you cannot host behind a router.

  These are the instructions I put fallow:http://digital.ni.com/public.nsf/allkb/B1E9A3D78BAED949862573AD0065D4D2

• How to create a file of data to the remote server...

  I need to create the data to the remote server file...

  When I tried to create using the command

  create tablespace XXXC_DATA Datafile

  ' \\1XX. XX. X.XXX\TestSVR_Share\CCC\oracle\Datafiles\CCC_DATA. DBF'

  size 10 m

  autoextend on

  next 10 m

  MaxSize unlimited;

  

  I checked the local policies.

  (I am an admin user and I added 1) access this computer from the network 2) Act as part of operating system and update of local policies

  It did not work.

  so I've mapped the shared location and run ogical below command

  create tablespace XXXC_DATA Datafile

  ' Z:\TestSVR_Share\CCC\oracle\Datafiles\CCC_DATA. DBF'

  size 10 m

  autoextend on

  next 10 m

  MaxSize unlimited;

  

  Can anyone help on this.

  It does not matter if * you * have access to this shared directory. This is important if the user used to run Oracle.

  When you access the Services application in Windows (I assume you are the DB on Windows), double-click the Oracle service for the database in question and go to the tab "Log On", it is * that * the user who must have access to the directory is shared. If you have "Local System" set as a user, you will need to change this.