What remote server I connect too

Similar Questions

• remote server configuration question

  Hello
  
  I have my web app works fine on a local apache/php/mysql server. but now I'm doing work on the remote server. so far, no luck. a few questions:
  the connection to the base for my local server has a user id and password. can I use the same username and password for the mysql database remote?
  I understand how to connect the db to the apache server locally (I use port 8080), but I don't understand how the apache finds the right mysql database on the remote server. do I have to use the db connection in the application of dw Panel and modify the connection settings somehow it can therefore be used for the remote server? I noticed that I get an error: the requested URL doglist.php was not found on this server.
  
  Additionally, a 404 not found error was encountered while trying to use an ErrorDocument directive to manage demand.
  Apache/1.3.37 Server at www.counselorone.com Port 80
  
  Thanks in advance for all advice.
  Mike

  David and Gareth Murray.

  Thanks for your help. The last piece was dense enough to me, but I got it. David, I know that you deal with in your book, but you could probably devote a special section, its that delicate. The nuts and bolts of what I've done is...
  1. to develop my unconscious site at the remote server, including making local database connections. Because microsoft IIS stored in my own way, I changed the port of Apache on 8080. After reading David's comments, I think that its smarter to simply not bother to change the Apache port and manually turn off the IIS application. OR, you can go back once you have created the site and edit your config file Apache backwards to port 80, because you will need the localhost, not localhost: 8080 to connect to the remote server. To avoid pulling the hair, just to deal with the default configuration of apache on port 80.
  2 hire a remote hosting company. I use the server range, although I have not been with them long enough to give a thumbs up or thumbs down.
  3. put the local site on the remote server. I used public_html to store my files.
  4. download the remote server to connect to the database. This last part seemed to require a few things, which were not obvious. Following the advice on this forum, I went to the remote site and note the username, password and database name. (these are NOT the same as my local site). I then copied/renamed my database on the local site to match with the prefix than the remote server has put on my remote database. For example my db was named test1 locally, but the server named wwwcoun_test1, so I renamed it which.
  5. I tried to establish a connection to the database with the new names. It worked. my understanding is that everything we try to do here is set up the connections correctly. you're dealing with loading data in the database with phpmyadmin, a great time-saving tool.
  6. I went on site remote and typed in the url for files downloaded to see if they would connect to the database. they did it.

  That's all. Hope this story helps the next person who needs help.

  Yet once again, thank you very much to those who responded. I appreciate your support.

  Mike

• Help required for a very simple HTTP connection to a remote server (not localhost)

  Hello

  FlashBuilder 4.x is very promising, but the system is very difficult to use and very simple data binding operations making becomes a daunting task. In addition, the documentation is terrible, and it seems that each example Adobe has ever published of concerns localhost and not on a remote server. What happens if we do not use localhost, Adobe?

  Please, can you show me or tell me, how to link external data - even something simple like "hello world"-in a control on the page - textarea, datagrid, etc.? I want to use the HTTP services or return some HTML/XML/JSON - or even nothing. Whenever I try to connect, I get an error saying the URL I entered contains an error and I need to check the settings etc. Here my script, which is a ColdFusion script just returns (valid) XML. I also have a crossdomain.xml in the root of the server file and the script works fine when the seizure in the browser, etc..

  Enjoyed all the examples. Really want to dumping FB4.6 in the trash at the moment, because simple things that can be coded by hand in seconds become enormous tasks in FB

  Kind regards

  Mark

  Nevermind, I finally remove FlashBuilder and installed Corona. A written my first application in an hour, FlashBuilder is a dinosaur compared to Corona. Corona which supports also a lot faster and the documentation is much better. FB is bloatware and much too bulky. If you want quick results and an API that works out of the box, I would advise you to Corona. I spent many wasted hours juggling FB and it does not only deliver.

• What are the network requirements for the remote server of the Panel?

  What are the network requirements for the remote server of the Panel?

  I tried for awhile now to set up a Control Board.  I can connect to my remote panel of computers from other computers on my local network but nowhere else.

  Whenever I use web publishing tool gives me a URL in this format: Http://Computer-Name.Corporate-Name.local:8086 / VI - nom.html apparently it means I have a local DNS server and this URL is meaningless to the public.

  When I try to connect with the Operate > Connect to... remote control, I get this error message:

  "Connection to Server remote panel...".
  "Connection refused by the server remote control specified: make sure that the LabVIEW Web server is enabled on the specified server.

  I got the same error when I tried to host a remote panel from my laptop at home, on my Wi - Fi.  Is there some network settings or firewall I'm not seting?  Would it be my server or the router or the private network?

  My goal is to be able to host remote panels of my laptop while I'm on the international scene, creating using 4 G internet mobile.  Is it still feasible?

  As he Turners on my router had to be put in place so that my Port is in the rage of transfer.  Also I had to disable DHCP.  Without that you cannot host behind a router.

  These are the instructions I put fallow:http://digital.ni.com/public.nsf/allkb/B1E9A3D78BAED949862573AD0065D4D2

• Remote access client 2.0.1 for Mac OS 10.4.11 connection to the remote server running Windows Server 2008 R2

  I have a mac with OS 10.4.11 and I try to access a remote server running Windows Server 2008 R2.  I have installed, uninstall and reinstall the Client of remote access for Mac 2.0.1 but I can not connect.  My network administrator tells me that Mac OS 10.4.11 is so old and useless that I am better just throw my computer and buy a new one in order to solve the problem.  This is absurd.  Can you help me?

  Hi Benjamin Spicer,.

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet. Please post your question in the Forums TechNet Remote Desktop Services (Terminal Server Services).

• "Error 638: the remote server is unresponsive in a timely way", when I try to connect to the Internet.

  Title: "error 638: the remote server is unresponsive in a timely way." What in the world is that supposed to mean?

  I have known the above error (for 2 weeks now) whenever I try to connect to the internet via modem huawei e160. I have not installed any programs recently. I physically contacted my ISP and according to them, the modem works properly and that the problem is with my computer. A professional COMPUTER friend told me that he once experienced a similar problem and the solution in the end was re - install the operating system. I did as much with PC to get back that far. Someone please help coz it is a nightmare.

  I had the same problem. And just uncheck the 'Operator operator-assisted' Option on the "Advanced" tab in the window 'Manage settings of the map' did the job. Try it. You will surely succeed.

• connect to the remote server

  Hello friend

  Pls help
  Given below to other site, ip address of the server 172.16.5.10 and public IP address 41.59.251.X, I need to create the tunnel so that my
  Server with the ip 172.17.18.41 and my public IP 41.59.251.Y must be able to communicate with the remote server which is

  172.16.5.10
  What is the way forward? my server ip address 172.17.18.41 mask 255.255.255.33

  -3des encryption
  -Md5 hash
  -Preshared authentication
  -Group 2
  Pre-shared key 66@#fgk
  -Public IP 41.59.251.X
  -ip address of the server 172.16.5.10 (he is 27 subnet)

  Is what I want to implement, help the routing between two networks and access-list for only two servers to talk to pls

  crypto ISAKMP policy 30
  BA 3des
  md5 hash
  preshared authentication
  Group 2
  ISAKMP crypto key 66@#fgk address 41.59.251.X
  Crypto ipsec transform-set STRONG esp-3des esp-md5-hmac
  JOE 30 ipsec-isakmp crypto map
  set of peer 41.59.251.X
  86400 seconds, life of security association set
  transformation-STRONG game
  PFS group2 Set
  match address 140

  access-list allow 140
  IP route

  interface GigabitEthernet0/1
  Description CONNECTION to ISP
  IP 10.17.50.1 255.255.255.252
  IP virtual-reassembly
  automatic duplex
  automatic speed
  JOE crypto card

  Joe

  En to encrypt traffic must match the access list, and it must match the list of access on the other side.

  The easiest would be to ask the person manageing the router on the other side to send you the configuration, otherwise it's just a guess how this access list must be configured.

• CS6 Dw hangs when it is connected to a remote server

  Hi all

  First of all, thanks to all those who have contributed here I found a ton of useful info on these forums.

  I am facing a problem that has been around for awhile, but I'm afraid, I was unable to find a solution. Dreamweaver (CS6) is very slow/unresponsive in work as part of a 'Site' connected to a remote server. The weird part is that this happens only on my laptop, the feature works fine on my desktop PC which has almost identical characteristics except that my laptop is 100% SSD (you would think it would be more efficient). It hangs for a few seconds when you save a file, which IMO is acceptable, I understand that it is pushing it to the server. The real problem comes when I'm switching between open files, or open a new file. Two of these actions take about 10-15 seconds, during which Dreamweaver has a crisis and I get notification (no response) in the bar of the window.

  Dreamweaver is updated, I use no archiving/retrieval functionality. In the server settings, I have «automatically download to the server after...» "and"Maintain synchronization information"checked.  Ftp services work perfectly with my remote server, Notepad ++ also works very well.

  PC card in case it is important: (laptop is almost two years but decent hardware and short grand otherwise)

  ASUS

  Windows 10

  I7

  Samsung 500GB SSD

  8 GB RAM

  NOTE: in addition, once the file is actually opened and loaded, DW works fine; no lag, no hanging. It is the Act of switching/opening files (file at the top of DW tabs) which takes forever. Economy/downloading files takes less than 5 seconds and during this time, you see the download dialog box and DW does NOT get the "(ne répond pas) ' as it does when switching/opening files."

  Any suggestions on fixing this?

  Best regards

  Alex Overton

  Dreamweaver is designed to operate on local files that you upload to the remote server when you are finished editing the. I don't have CS6 installed, but I think he allowed you to work on individual files without defining a site beforehand, and some people used it to edit files in situs, that is what it looks like you do. It is no longer possible in Dreamweaver CM³. You must define a site to be able to edit a file.

  Dreamweaver CS6 is is no longer officially supported. If it works well otherwise, I think that you'll just have to consider this shift as a reality. You access files on a network link, so there is a latency. Why it happens on one machine but not another is a mystery.

• Can't export virtual machines: unable to connect to the remote server

  Hello

  I'm working on vSphere client 5.1 (vCenter Server 5.1). Trying to export a virtual machine for distribution model. When I go to file-> export the template OVF..., I get the following error message:

  Can't export virtual machines: unable to connect to the remote server

  Remote not sure what/who he is not able to connect to. If I connect vSphere Web Client and navigate to the same model (or all other models), under 'All the Actions of vCenter' I don't have an option to export to the model of the FVO. But if I use a VM machine instead of a virtual machine template, I have the ability to export to the OVF, but it is grayed out.

  Am I missing any customer authorization or plugin for vShpere?

  Discovered that vSphere server had some modifications made by HIM to resolve the violation POODLE. HE had to set the ip address of the machine where export OVF will be performed. Which allowed the connection to establish vsphere client and perform an export of the FVO.

• Cannot ftp to remote server, even if connection tests successfully

  I'll put up a site in 2014 CC DW and I set up my site as the server (using .php with MAMP PRO) test and adjustment to the top of my remote server with my host. (In the past I made changes in DW and serving Transmit FTP) I copied my settings of transmission and copied in the settings of server remote from DW and got a successful test. I created a test file and clicked on 'Put', but the file does not appear on the remote server. Flying over my mouse Put indicates that DW puts my test file on the Test Server, which is really just my local site. I want it to go to my remote server. I clicked on disconnect from the test server think that could force him to go on the remote server, but that did not work. What I am doing wrong?

  Thank you

  Randy

  Expand your files Panel.

  Click Connect to the remote server icon.

  Nancy O.

• Connect to a remote server

  I used Dreamweaver for a few years. Recently, I moved to a new computer Windows 7 OS and installed Dreamweaver again. I have regularly manage and edit a Web site without lucrative, but unable to connect to the remote server of the Web page that I used to edit the page in Dreamweaver. The site is published, the files are on my local computer and the remote server, but I can't simply connect. It gives me a msg of error without too much detail. I tried to copy the game to the top in place on my old computer to my new computer, but still cannot connect. I can't tell if it's a firewall on this new computer problem or some other thing that is specific to the operating system on the new computer, or something else entirely.

  Can you connect with an FTP 3rd party like Filezilla client?

  If not, are you sure that your server remote login credentials are correct?

  Nancy O.

• to connect to a database on a remote server

  Hello
  11g R2 on Win 2008, I want to run RMAN to connect to a database on a remote server target. I want to be able to connect like this:
  

   
  set ORACLE_SID=MYDB 
  RMAN NOCATALOG target / 

  I saw the following in the documentation:
  

   
  
  For the Windows platform only, remote operating system authentication over a secure connection is supported. You must specify the net service name for the remote database: 
  CONNECT /@net_service_name AS SYSDBA 

  My questions please:
  -is the same net_service_name (service_name = MYDB) in tnsnames.ora?
  
  -Can we use "/ @net_service_name" in the RMAN command line?
  
  -are there any initial setting to define for whom?
  
  Thank you.

  user522961 wrote:
  Hello
  11g R2 on Win 2008, I want to run RMAN to connect to a database on a remote server target. I want to be able to connect like this:

  
  >

  -Can we use "/ @net_service_name" in the RMAN command line?

  I already know the answer, but my question is "how much does it cost to try and see for yourself?
  What is the absolute worst thing that can happen if you issued this command at a command prompt?

• Connection to the remote server through ODBC

  I am trying to connect to my XP box to an HP - UX Server databases
  with Oracle 10g via ODBC. I have tried almost
  everything and still cannot connect to it.
  
  I have the Microsoft driver and the driver Oracle, as well as the
  Oracle Instant client installed in the XP box, with a tnsnames.ora
  file that points to the server, the variable ORACLE_HOME defined, etc.
  
  I know it's available, because I can connect to this same
  machine with JDBC Oracle Thin Client (ojdbc6.jar). This driver deesn can't
  don't even need the customer Oracle installed on the local computer. I just
  specified the IP address, port (it is a nonstandard port), SID, user, pass and it works.
  But do not support the programs I should use JDBC.
  
  Do you have any connection string that is right for you? I tried the
  those of connectionstrings.com and carlprothman.net, but I think they are
  not intended to connect to a remote server...

  Your applications are trying to create a connection without DSN to the database? Or they're trying to connect via a DSN? You try to use a TNS alias? Or include the definition of TNS in the connection string?

  You have created a DSN to connect to the Oracle database? If so, the ODBC Oracle driver provides a button "test connection". What did you use? If so, does the connection?

  How many houses Oracle you have on this machine? I assume you have at least two, or more. You have configured by an TNS_ADMIN environment variable? If this isn't the case, the tnsnames.ora file would need to be replicated in every Oracle home you want to have access.

  From the command line, can you tnsping the TNS alias you created in your tnsnames.ora file?

  Justin

• I have reset firefox because of the slow, now it says firefox is configured to use a proxy server refusing connections, what a waste! r

  I am using windows 7 Home premium. Button Firefox connected if slow to get on the internet, so I used the reset button. Now, firefox is configured to use the proxy server refusing connections, unreal... I hope you can help soon... Thank you, Donna

  you are the very welcome!

  It should be possible to select what happens when you click on an e-mail link in the applications Panel in the firefox options. For more information, see change the program used to open e-mail links

• Windows Server 2003 r2 64-bit Remote Desktop RDP connection does not

  Hello

  I went through most of the support guides I can find on the internet and nothing seems to work.

  I enabled and disabled the service. Enabled and disabled Internet connection sharing. I totally disabled the firewall on the server and I can not always connect to the server via RDP

  I only get an error message.

  Remote Desktop cannot connect to the remote computer to one of the following reasons:

  (1) remote access to the server is not enabled

  (2) the remote computer is disabled

  (3) the remote computer is not available on the network

  Make sure that the remote computer is on and connected to the network, and remote access is enabled.

  When should I wear analysis server there is no enabled 3389 port. I am using RDP just for administrative purposes. I used to connect to the machine via RDP but one day it just stopped working.

  I also checked a few updates selection to determine if they are installed. All updates that might have compatibility problems are not installed on the server.

  Any request for information will be answered promptly.

  Thanks in advance.

  Hello

  Please post your apparent in the following link for assistance with problems of desktop connection remotely:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=winserverTS

  I hope this helps.