ox00000050 of error that no safe mode cannot open a session and I don't have a cd rom

Similar Questions

• Windows Photo Viewer cannot open this picture because you don't have the appropriate permissions to access the location of the file. »

  Separated from this thread.

  I have the same problem when I try to access some of my photos through any method (File Explorer, IE, Windows Photo Viewer, etc.).  When I try to display the image, I get an error message that says "Windows Photo Viewer cannot open this picture because you don't have the appropriate permissions to access the location of the file."  A few photos in the folder open very well.

  The photos are stored on the hard drive of PC in the pictures folder.  Not all pictures are affected - some I can always access.  I tried to run your AutoCorrect tool - it has not fixed the problem.  I tried to add "everyone" by your above statement and he could not solve the problem.  While it was updating the permissions for everyone, it displays the following error message: "unable to enumerate the objects in the container.  Access is denied. »

  Hi Bruce,.

  You might face this problem when you have not signed up your computer as an administrator user. Please write us with the following details.

  You did changes to photo viewer settings prior to this problem?

  I suggest that you follow the steps in the link below by Babu V dated August 21, 2013 and check if this may help you.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-files/window-Photo-Viewer-cant-open-this-picture-because/05e31f84-75ab-4772-84a5-5ce0e6e71f61

  Let us know the status of the issue.

• Cannot display pictures using Windows, error Photo Viewer: cannot open this picture because you don't have the appropriate permissions to access the location of the file.

  Original title: ASK the VIEWER of PHOTOS WINDOWS WINDOWS 7

  WHEN I OPEN MY IMAGE (PHOTO) COLLECTION IN WINOWS PHOTO AT SUNDAY VIEWER BUT IT WINDOWS PICTUREMESSAGE cannot OPEN THIS PICTURE BECAUSE YOU HAVE not the PERMISSION APPROPRIATE TO the ACCESS of the LOCATION of THE FILE, I CHECK NO VIRUSES, NO PROBLEM to OTHERS AND SAID THAT SATURDAY, I OPENED TIME OPEN THE PICTURES, BUT AFTER ONE DAY WHAT PROBLEM ANY DEFINITION of PROBLEM OR OTHER PLEASE HELP ME AS AMODERNE, IF YOUR NEED A FURTHER INVESTIGATION OF MY SYSTEM SAYS I SEND YOU AS BURT SOLVE THIS PROBLEM

  Hi JULIE,.

  Thank you for writing to Microsoft Communities. From your problem description, I understand that you are not able to view pictures using Windows Photo Viewer. Please correct me if I misunderstood.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  Until we start troubleshooting on this issue please provides us with additional information by answering a few questions below, this will help us better solutions to the problems.

  1 did you change on your computer before the show?

  2 are you able to open the file using paint?

  Please follow the steps mentioned below:

  Method 1:

  Step 1: Perform safe mode

  Safe mode, start Windows in a limited State, where only the essential is started. If a problem does reappear when you start in safe mode, you can eliminate the default settings and basic device drivers and services as causes possible

  Start your computer in safe mode with networking

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 2: Perform the clean boot

  A clean boot helps eliminate software conflicts. The article below describes how to solve problems in Windows 7 by performing a clean boot. This article also describes how to start the Windows Installer service and how to reset the computer so that it starts as usual. To configure your computer to clean boot see the following link.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 in the article to start on normal startup.

  Method 2:

  System Restore can return programs and system files from your PC to a time when everything was working well.

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  Note: If you have installed an application after the date to which you are restoring, you will need to reinstall these applications

  Please complete all of the recommended steps and if after following the steps to issue still persists, please come back to us and we will be happy to provide you with additional options available that you can use to get this problem is solved.

  If you are unable to perform the steps mentioned above, I recommend you to contact our live support by clicking on the link http://support.microsoft.com/common/international.aspx?RDPATH=dm;en-us;selectassist&target=assistance

• I have amended past cannot open a session and cannot open a session in nine w or old password

  I changed my password and can't log into nine w or old password. I don't have a security question and cannot connect to all the

  What year Macbook and what operating system you are running. As this will determine what to do. And what screen receive you at startup.  https://support.Apple.com/en-us/HT204156

• Cannot print, cannot open a session and not to receive emails from your

  I started the impossibility to print anything. Firefox says that it cannot find my printer (I paraphase). When I try to find the settings to check, I can't find them. The options that others have listed to solve these things are options that I can't find.

  So then I tried to log on th the Firefox site but cannot, as I don't remember my password. Press the lost password option, key to my email address, it is said by e-mail has been sent. Received nothing while the other emails arrive in my Inbox. Check spam, trash and so on, but still no email to reset my password.

  Wait an hour and then left through the same process. Still not received any e-mail after checking the trash and spam and Inbox. Do not have a separate folder for Firefox or Mozilla.

  Had to create a second account to be able to post this message. I don't know where to turn or what to do next. Does anyone have an idea of what is going on please?

  Hi Sojourner,
  For a general printing resolution and options see:

  • Correction of the printing problems in Firefox

  As for the question with the account, please PM madalina or myself for more investigations into the other account support.

• Windows Photo Viewer cannot open this picture because you don't have permission to access the location of the file

  I reinstalled my computer using the same disk of win7 recovery for sale.

  But I found files in the folder (windows.old) could not open, even the files could be moved to a new place.

  I could review the authorization of certain files, but several folders could not be revised approval, which include many files of images or movie files.

  I want to know how to solve the problem (you might consider the photos and movies could be challenged).

  Thank you!

  See the article depending on how appropriate the folder:

  How to: make a folder/file in Windows 7

• Cannot open a session

  I just start a new laptop and trying to get Outlook, Hotmail, I downloaded Live Essentials. In the context of that Skype has been installed. I already have it on my desk top so no not anything would be a problem.

  I am at the point of connection and when I used the same log-in under my desk, did not work. So clicked on password forgotten, changed. Tried to log in again, not good. Keeps asking for my Skype name. Have no idea what it is other than the login name or the name that appears at the top of the page on my desktop.

  No matter what I have / use, cannot open a session.

  Don't know what other information need. Give me an idea what to do.

  What exactly is the version of Skype installed on your laptop? In Skype goto help-> on Skype.

• During startup, I get an error message that the registry database cannot find a file and modify registry to delete the reference to the file in the registry. How can I do this?

  Original title: Registery Error Message

  During startup, I get an error message that the registry database cannot find a file and modify registry to delete the reference to the file in the registry.  How can I do this?

  Hello

  • What were the changes made before the problem occurred?

  I recommend you perform the clean boot.
   
  Configuration of your system in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• I have a blue screen I can't start and I don't have a boot disk I can't start in safe or any type of mode

  I have a blue screen I can't start and I don't have a boot disk I can't start in safe or any type of mode

  ccorr,
  Thanks for posting on the Microsoft answers Forum.  You will need to provide additional information.

  What version of Windows and service pack level are you?
  Do you get any error messages?
  If something has changed on your system prior to this issue (hardware or software)?
  What "Startup disk" do you have?  It is the manufacturer of PC?

  Here are a few things to try:
  The first thing to do is to boot your system and start pressing F8 as soon as it starts booting.  You will get the Windows startup options screen.  Select "Disable automatic restart in the event of system failure" and let it restart.  When it starts, it can now stop with an error screen and give an error message and code.

  Disconnect all external devices (printers, USB Hub, drives external, etc.) and try to start.

  Post back with the error information and results. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I rebooted my machine yesterday and now when it comes to the screen with the scroll bar it restarts in loop. Impossible to enter Safe Mode (arrives at crcdisk.sys and while it recharges) or normal startup mode.

  I restarted my machine yesterday and now when it comes to the screen with scrolling bar (think Night Rider), it restarts in loop.  Impossible to enter Safe Mode (arrives at crcdisk.sys and while it recharges) or normal startup mode.  Startup Repair is unable to repair.  She argues that the onus of a BadPatch.

  Startup Repair shows the following:

  Problem event name: StartupRepairV2
  Signature of the problem 01: external Media
  Signature of the problem 02: 6.0.6000.16386.6.0.6001.18000
  03:6 problem signature
  Signature of the 04:262148 problem
  Signature of the problem 05: BadPatch
  Signature of the 06 problem: BadPatch
  Signature of the problem 07:0
  Signature of issue 08: 1
  Signature of the problem 09: SystemRestore
  Signature of the problem 10:0
  OS version: 6.0.6000.2.0.0.256.1
  Locale ID: 1033

  Hello

  I hope you made redundant data backups as I suspect that the drive has failed. If a PC, you must
  remove all power and remove and reinstall all the cables (at both ends where possible), memory and cards. Do
  not tighten, effectively remove and replace them with care.

  Click here for the manufacturer of your hard drive and launch their diagnosis on your drive.

  By manufacturer diagnostic utilities
  http://www.techsupportforum.com/hardware-support/hard-drive-support/302602-hard-drive-diagnostic-utilities.html
  SpeedFan
  http://www.almico.com/sfdownload.php

  HD Tune
  http://www.hdtune.com/

  ----------------------------------------------

  If necessary:

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  No new chances.
  Rob - bicycle - Mark Twain said it is good.

• administrator cannot open a session

  Administrator cannot open a session, each time I have enter password, returns, "THE service USER PROFILE SERVICE has no connection. User profile cannot be loaded. Help!

  ·                        Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Vista cannot open .exe files and rundll32.exe are missing and are not accessible.

  Windows Vista cannot open .exe files and errors occur with rundll32.exe.

  http://www.Winhelponline.com/articles/105/1/file-association-fixes-for-Windows-Vista.html
   
  Get the patch exe file by clicking on the page and choose Save target
  As. Can you double click it? Otherwise you can start
  c:\windows\system32\regedit.exe find and right click on it and choose
  Run as administrator. Does this work. Otherwise copy regedit.exe for your
  Desktop and rename the regedit.com. You need show extensions to rename.
   
  That's what help said to show extensions.
   
  Show or hide file name extensions
   
  A file name extension is a set of characters added at the end of a file name
  determine which program should open it. Follow these steps to choose
  If Windows displays these file extensions.
   
  Click to open the Folder Options (in Control Panel).
   
  Click on the view tab, and then, under Advanced settings, do one of the
  Next:
   
  To hide file extensions, select hide them extensions of known file types
  check box, and then click OK.
   
  To view file extensions, clear hide them extensions of known file types
  check box, and then click OK.
   
  Start Regedit, menu file - import and import the downloaded file.
   
   
  --
  ..
  --
  "Leecherous" wrote in message news: 9a998a10-f4f6-433 a - 9 b 55-c051da91f152...
  > Windows Vista cannot open .exe files and errors occur with
  > rundll32.exe.
   
   

• I lost my administrator password. And I don't have any other accounts that are admins

  I have 2 accounts on my computer, one of which is an administrator and I don't have the password for it. Anything that can have an admin password necessary for there for example change my current account to an administrator.

  I also tried to use the comand prompt, but when I typed: Net User Administrator / Active: Yes it says error System 5, access denied

  Hello

  The Microsoft Community cannot help with password lost or forgotten by Microsoft Policy.

  Keep secure passwords - Microsoft strategy on move the passwords
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  Microsoft's strategy concerning password lost or forgotten (KB189126) - has the help
  http://support.Microsoft.com/kb/189126

  What to do if you forget your Windows password (Vista and Windows 7) doesn't help
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Cannot open the document. You may not have permission or the document can be opened already.

  Whenever I try to open a document on our Mac server I get this error message: "cannot open the document. You may not have permission or the document can be opened already. "After that, I click Ok and then am able to open it. What is interesting is that immediately after the first time I try to open the file and get the error message that I noticed a .idlk (file locking) gets created even if she could not open. After that, I open it. Then, once I close it, the lock file goes.

  Someone knows something about this problem? For this particular user permissions are read/write on the file and all documents.

  Yosemite 10.10.3

  InDesign CC 2014

  Well, the problem has been resolved. It ends up being ESET antivirus v.4.xx for

  company. After I disabled it temporarily everything worked normally. So created

  exclusions for the shared network resources that they are working for.

• I want to go back to the previous version of 2014.2.  .3 is far too buggy and full of error messages. Create problems because I'm on a timeline with my client and I don't have time to fool around with all the problems.

  2014.3 is far too buggy and full of error messages. Create problems because I'm on a timeline with my client and I don't have time to fool around with all the problems.

  You don't mention what you have encountered errors? Workaround for the problem more frequently reached here is Re: error in Muse: object UID:U6875 has two (or more) owners: U3633 and U3165

  If you have a copy of your .muse file that has not been saved by using 2014.3, you can downgrade by uninstalling Muse, and then choose the previous Version in the drop-down list of filters in the Panel of Apps from the desktop creative cloud application. There will be a popup next to the Muse, where you can select a version prior to install.