Clip + stutters with speakers

Similar Questions

• I have a video clip taken with a Go Pro.  The clip is upside.  Is it possible in Photos to reverse that?

  I have a video clip taken with a Go Pro.  The camera was upside down when the clip was taken.  I imported it in Photos, and now he is always upside down.  Is it possible to return the clip?

  Not with pictures - you can I think iMovie or QuickTime - export video back in the ouside software and then re-import

  LN

• Monitors with speakers?

  One of the HP monitors have loudspeakers built-in and audio output ports that can connect to external speakers?

  Hello

  Check this box:

  http://www.NexTag.com/HP-monitors-with-built-in-speakers/products-HTML

  I think not only considered the monitor speakers is a good idea, you need many cables aound except pass by wireless. Just buy a monitor with speakers builtin (many brands autour).

  Kind regards.

• Unable to set keyframes in the audio clip selected with the pen tool - can no longer see the volume control line after developing the clip. What could be the problem? This seems to be the problem on any project that I opened.

  Cannot set keyframes in the audio clip selected with the pen tool - cannot see even the line volume control more to set keyframes on having developed the clip. What could be the problem?  I use the first CC pro @.

  You can use the Ctrl key and then click with the regular selection tool, clicking with ctrl will make a new keyframe. in this way, have no need for the tools. CTRL has other great shortcuts that will stop you having to spend retouching pads tools too.

  If the automation keyframe line is missing, you can switch on and off in the menu sequence.

  

• 2 GB clip stutters, MP3 48 kHz playback - what is a defective item?

  Hello

  I was really impressed by my new clip, until I downloaded a few radio shows, and after listening for a while, I could hear occasional appears in the background. I found that if I sped up and back a few times, then played, it got worse. It's only on programs from a source, and after much playing I realized that it was the only source with mp3 48 kHz sampled. If I convert them to a different sample rate, they played cleanly. I then found a download of 48 kHz from another site, and also, who appears and stutters.

  The version of the firmware has been 01.01.18, so I've upgraded to the last using the Sansa Updater (at 01.01.32) and makes it worse! Before I had to listen carefully for the problem, but now it's terrible.

  I checked 22,32 and 44 kHz and they are all ok, it's just 48.

  Anyone of you experts Sansa have some ideas? Should I return it and try another? I searched the forum and no one seems to have pointed this out.

  Thank you

  Jonathan

  To work around the problem, try adjusting the equalizer custom.  Set one of the 5 strips the midpoint setting.

• Sound of buzzing/grinding/Popping/stuttering from speakers for Dell Inspiron N7110.

  It is a similar problem, I read all the forums, and I tried ALL the suggestions of those messages that say they work. Unfortunately, there is no problem for MY model of laptop, it's always for some 15 - something.

  I have a buzzing/grinding/popping/stuttering sound when I listen to the music, when I watch YouTube videos, or do much of anything that requires sound. It comes through the speakers of the laptop, any headphones that I use and even when I plug in speakers to use. I have tried everything; rolling back the drivers, update drivers, installation of something quick somethingsomething to Intel, I'm getting desperate. It's been two or more weeks now, and I'm at my wit's end.

  My computer model is a Dell Inspiron N7110 with Windows 7 64 bit.

  Because there is no forum for other messages on this problem with this model, I have not exactly a place to turn without actually posting something on this subject.

  Amaterasu011

  I've tried everything

  Have you tried to restore the original computer to the factory settings? If you had no problem when you first received the laptop, restore will fix it. (Page 70 of the Setup Guide - Factory Image Restore).

  If restoring fixes it, it means that a configuration change caused the problem, probably an update. If you keep track of future updates, you can discover that it triggers the problem when it repeats.

  If the restore does not resolve and the computer was not initially the problem, this means that a hardware problem has developed.

• TV Clip - use with external power?

  I mounted a large SD card on my clip and I wanted to use it to record the long walks, but the battery lasts 1 hour. I plugged an external battery to the USB connector but when I did this it will not allow aid such as a camcorder. It is not good that I can't use it then for more than an hour before having to recharge! How can I solve this problem?

  The Camileo Clip has an endurance of about an hour.
  The Camileo snap the playful s, part camcorder designed for shooting small segments of a group event.
  Unfortunately, the battery is placed in the case of the camileo camcorder, so that you can t take with you spare batteries.

• Problems with speakers using Bluetooth (a2dp) with several Windows users

  I have the bluetooth speakers (Yamaha NX B02)
  they are easily configurable in bluetooth stack Toshiba everything works
  as long as I use my profile

  If only someone else wants to log on to any other profile (Windows XP Home edition)
  battery Bluetooth pair with the speaker Yamaha

  I disconnect the speakers on my profile
  Speakers are in pairing mode - they are on the list of devices to connect
  but they just don't connect.
  Once they are paired on the profile "User1" on "Laptop1".
  the "user2" or any other on the same "laptop1" aparently is to buy a new set of speakers
  coz this standing right next to him are to be used when you are logged in as "user1".

  First of all I really don't see why the bluetooth stack holds the list of devices, and a different configuration for each user?
  However - is it possible to IMPORT connection parameters of device somehow of my profile to any other
  Or maybe there is something else I should do to be able to pair it with my speakers no matter as to which I am connected now

  Thanks in advance

  And YES - the Yamaha set sounds great - I'm really happy

  Hello

  I m not 100% sure that if I understood exactly you <-->Bluetooth speaker problem.

  According to your message, you can't pair BT speakers during the second use Profil2 if the speakers are already paired with the mer1. Am I wrong?

  Well, in my opinion there are nothing wrong because the speakers were already connected to the laptop using the BT. to my knowledge you cannot connect any BT device if it s already connected using another profile.

  I think you should always disconnect the BT speakers using the mer1 if you use it n t. Then another user using Profil2 would be able to connect the BT speakers.

  Best regards

• X220T: Skype squealing of high-field with speakers muted

  What is the cause?

  http://www.YouTube.com/watch?v=mrR8Mq8VAO0&feature=youtu.be

  My Lenovo Thinkpad X220T making sounds very strange, treble when Skype starts - even if I cut the speakers. The model of the sound is always the same, indicating that Skype should do whenever he starts.

  This video was filmed with a Samsung Galaxy S, and you may need headphones/good speakers to hear the sound. Despite a lot of noise (fan of the computer), there is no other loud sounds to break your hearing with - then turn up the volume.

  Very likely groan of CPU. Workaround is to disable CPU power management, which significantly increases the consumption and production of heat.

• Cannot activate Clip Jam with Audible Manager

  I've seen a lot of posts on the forum about the problems with Sport Clip / Clip Zip / Zip Clip + and Audible Manager.  Add Clip jam to this list.

  Until you can transfer books on the device with the Audible Manager, you're supposed to 'activate' the device.  When I try this, I get "Failed to set the activation of device data."    Other SanDisk devices have the same problem, but none of the workarounds to solve the problem for other devices work for the Jam Clip.

  Someone at - he heard of a fix or a workaround for the Jam Clip to activate with Audible Manager?

  Thank you.

  I just got the solution of sound support.  It is similar to the solution used for the Sport Clip: the drive letter assigned by Windows for the Jam Clip must be changed by default.

  Instructions for Windows 7:

  With the Jam Clip connected to the computer, select Control Panel-> administration-> computer management tools

  In the computer management dialog box, select disk management in the left pane.

  One of the disks will be the Jam Clip.  Right-click on it and select "Change Drive Letter and paths... »

  Select the current drive letter and click on 'change... '. »

  Assign the drive B: for the Jam Clip letter (assuming that you have not already another device, for example a floppy drive)

  Under Audible Manager, in the bottom right pane, where it says 'Sansa Clip Jam', make sure that the 'Internal' option button is selected.  With the new drive letter assigned, you can then activate the device.

  Good luck!

• Clip aligns with the bottom rail

  All of a sudden, when I move a clip in the timeline, the clip is aligned with cross-country in the sequence. It makes me crazy! I turned on and outside snap, nothing works. What is happening?

  No. I would literally try to move the video clip, located on V2, to the right or left and she could give in to V1. This would force any clip on another element down to the lower level, removing the lower clip. I threw my preferences and it fixed the problem. No idea of what was going on...

• How to rotate a video clip shot with a mobile phone.  I need to rotate the screen, not just the clip.

  I know how to rotate the clip in the screen using the 'Effects' Panel, but when I export the video finished it is small with a lot of black space around it.  It does not fill the screen.  I don't know there is a way but it can not understand.

  Thanks for any help, that all the world can offer.

  Go into the settings of the sequence and it set to custom and change the framesize.

  Staples can be turned in under the Motion effect options.

  

• First refuses to re-bind AE clips created with dynamic link

  I have several projects created with clips created in After Effects, through dynamic links (that is, by replacing the original by an After Effects composition item). After the upgrade to 2015 CC, these clips appearing offline. When I try to recreate a link to them, first just won't do the job.

  That's what's happening: I click with the right button on the composition in offline mode and chose to recreate a link to Media. The Connect dialog box appears. I click on 'Search', and the program correctly detects the project After Effects corresponding to the composition. However, when click on this project, nothing happens, the program remains Oyen.

  It does´t if I click OK or directly on the project of EI, first simply does nothing. So far, reissue of links works. I need to recreate a link to these compositions. Any suggestions?

  

  I finally solved it by updating the first and AE. I thought they were already updated, but I was not running the most recent version of AE. That's all!

• can not make or produce the clip modified with dark tones / highlights and reverse

  I can not make or produce a clip that has been modified with the shadows / highlights (smoothing time, black, white clip) and reverse with speed / duration.  When you try to make I get an error.  No number it says only: order and error.  If I try to produce the video, it starts to run and then I heard a sound that resembles a goat and the program stops.

  Clamp reversed, nest, and then add the effect or v.v.

  See if this will help.

• Making clips come with the split titles

  For the life of me I can't understand what is happening with my work multicam. I have two machines and I'm 99% sure that I do the same thing on both, but on machine 2, I can't multicam to work properly.

  I create my multicam clip

  I have 'create the clip sequence' do my multicam sequence.

  I create another multicam clip and insert it in my sequence

  On computer 1, all right. The video clip between the sequence as a lead single, green, indicating that it's multicam. And then I can always switch between the cameras.

  But on machine 2, when I try and insert in my sequence it is as long as TWO tracks separated from the video, and both are BLUE, not green. So the only way to "switch" back between the cameras is to hide the look and V1 and V2, or vice versa.

  Also, when I insert the multicam clip in the source window, I see two video tracks automatically highlighted for insertion in order, as I am presented with the option to choose if I want V1 or V2 to edit in the sequence. On computer 1, when I load the clip, I only can do V1.

  Hi Geoff,

  Plese check if on the timeline just below the time code, there is an icon for "insert and crushes as a nest or individual clips" icon.

  

  Vinay