P10-304: matter of procedure strange recovery

I'm a technician + certified PC a customer brought the laptop (Satellite P10-304) to me after she had taken this back to the place she bought. They said she needed a new hard drive. I inserted the DVD of recovery for the A60 (is the only recovery DVD she brought with her) and image the laptop when he went at the start would go to loading windows, he would crawl to take 30 minutes to start. Something is happening with the hard disk transfer rate.

I think it's the hard drive controller OR there is some chipset driver not get loaded from the recovery DVD as it's the fake recovery DVDs. I used Windows XP Home OEM CD as well, but the same problem occurred.
Any suggestions would be helpful.

Hello

In my opinion, you are trying to recover the device with a bad recovery CD.
As you said you have a recovery for a Toshiba A60 laptop CD and the unit is a Satellite P10-304. These are two different workbooks and to retrieve the device you need exactly the right recovery CD.

I suggest contacting the after-sales Service of Toshiba partner. Here, you can order the medium right of recovery.

Good bye

Tags: Toshiba

Similar Questions

  • Satellite P10-304 and recovery procedure

    Hi all
    I have a problem with my Toshiba Satellite P10-304, the problem is that I can't plant recover, it does not boot up to windows xp, so I need to recover it, in any case. When I put in the recovery of 1/2 disc it works fine. recovery comes to ask...

    '1... recover the entire hard disk.
    2... mode Recovery expert
    3... exit ".

    I choose the number one, once I kicked a a similar scree comes up saying...

    "Attention!"
    The contents of the hard drive should be removed
    1... Cotuninue
    2 Cancel... ".

    Yet once I press number one to continue. Now once I have this button the screen goes black and a message reading...

    ' GDISK (E) no Suck disk fixed - 1.
    Status
    GDISK (E) No. suck fixed disk - 1"

    Teh screen turns off again and toshiba screen flashes for less than a second and goes off again, with the words

    "!!!!! ERROR!

    Press a key to continue. "

    Once I press any key, the screen remains black with this message now on the monitor.

    "Date: Fri Aug 1 12:51:36 2005.
    Number of error: (11030)
    Message: Invalid Destination drive

    -------------------------------------
    "[PgUp] / [PgDn] [ESC].

    Once I Press esc, this screen comes up and it's been I can't go any further.

    X:\ >

    X:\ >

    It comes to have I'm stuck and can't get that much. I do not think that when recover what it is supposed to go that far, but there is, y at - it another way to reset the laptop may be a reset button on one of the panels under somewere I'm missing or batch should be thrown in the trash. Any help would be greatly appreciated and well thanks. A response as soon as possible would be great, thanks in advance.

    James

    I am sorry to say that it resembles a discarded HARD drive.

    You can boot from a floppy drive and see the HARD drive at all. If you can, then I suggest trying to format the drive in this way and then tries again.

    If this isn't the case, then you should get a new drive.

  • Recovery disk does not work on Satellite Pro P10-304

    A few days ago my Satellite P10-304 is not start, so I used recovery CD and got the machine works like new.
    Yesterday it wouldn't boot.
    Some thing on an ethernet cable unplugged error message, so I tried recovery CD because there is no data to lose.
    It won't work, to come up with an error message "GDISK (E) no such fixed disk - 1" then "error number 11030, invalid destination drive.

    Can anyone help me to get it booted/recovered please?
    I'm not fussed on something special for this old laptop, just a second computer for the kids to do their homework on.

    Hmm. sounds like a HARD drive failure
    Have you checked if the HARD drive has been recognized in the BIOS?

    > Something on an Ethernet cable unplugged error message.
    I guess you get an error PXE - E61 starting at startup.
    This message appears if the laptop tries to boot from LAN.

    This could happen if there are no other sources of boot as HARD drive, etc.

  • Satellite P10-304 turns on but the screen is off.

    Hi there... Please someone help me. I m having this problem since last week with my P10-304... it was working fine... but now last week I turned it off and turned the morning we return on the use of battery that he kept on going stand-by mode... and when I turned it off again and plugged the AC adapter is on, but screen didn't seem to turn on...

    I thought that the screen has gone... but last night I turned it on. He walks and went to hibernation! Don t know why. And now the same problem again... I turn power turned blue and the screen is blank (as it s off) I put t know what to do. I tried using the recovery disk. But nothing comes on the screen, as I said, the screen is blank as is it turned off s.

    Please help me... !!!

    Hello

    Well, this is a strange question. It's not easy to say what can be the problem.
    But first you must remove the battery and the AC adapter for 1, 2 hours.
    After this procedure, use the power supply for the test to work.
    If the problem is still topical, I guess that it s a hardware malfunction.
    In this case, the best way is to contact the service partner.

    Best regards

  • Satellite P10-304-DVD-ROM/CD-RW questions!

    Hello world

    I own one of the original computers Satellite P10-304, which has a DVD-ROM/CD-RW combo drive. For these last months, we have one or two problems with that. It was a little skittish in which CD it reads, but in the last days he almost completely stopped read correctly (audio/data) CD / DVDs. He doesn't seem to know they are there. However, the Player opens and runs well, as if it were playing the CD, but nothing happens on the PC.

    Curiously, I then looked on the list of the system, and the DVD-ROM/CD-RW driver had an excalamation mark. Even more curiously, the pilot was called TOSIICA! DWD something or other, when I'm sure it should have been DVD TOSHIBA etc.etc. Following the instructions, I uninstalled and then tried to reinstall, but it does not appear now when I try to add hardware.

    Confusing.

    I would be very grateful if anyone has any suggestions?

    See you soon,.

    Ian.

    Hello

    It looks like a car damage registry entry.
    But that is only my suggestion. The other possibility is broken (lens calibration problem) by car.
    You say that you have already removed the drive from the Device Manager, but the peut t OS recognizes the drive again. Well, in this case one of the possibilities is to use the System Restore tool or retrieve the device with the recovery CD.
    But if the drive is broken recovery procedure doesn t help. In this case, only the replacement of the drive can solve this problem.

  • P10 - 304 - no display after wake up

    Hello
    I sometimes have a display problem with my P10-304. Panel display won't wake up
    After waking up from hibernation or suspend-to-RAM. Blue led power is on, HD and CPU fans are working well.

    I have preinstalled, xp of origin with v6.4.10.4485 nvidia display drivers) and upgrading the bios (1, 90 - WIN)

    In this case, I have to turn off the machine and _delete hibernate data_ to start windows.

    What should I check to fix this upward?

    Greetings
    Jarek.

    Hello

    Well, it s strange. It's not easy to say what can be the problem.
    It would be very interesting to know if the problem will occur if you retrieve the BONES with the recovery CD Toshiba delivered.
    Did you use a Toshiba video driver or a driver nVidia graphics?

    You must use the graphics driver Toshiba because this driver is designed for the use of the laptop and it s something different as a driver of nVidia.

    Good bye

  • USB 160GB HDD - Satellite P10-304 doesn't see 127.9 GB

    Can someone help please, I bought a new 160 GB Seagate Momentus HDD.

    I put in a USB enclosure and connected, but when I go to Paragon Disk Copy he can see a disc unformatted 127.9 GB.

    If I right click on 'My Computer' and use 'Manage', it says I have a unknown 128 GB drive connected.

    I updated my BIOS to the latest available from Toshiba (2, 00 - WIN) dated 27/04/06 (on the Toshiba site "last updated on 27/04/06"). However, in the information system, he says: "BIOS Version/Date TOSHIBA V2.00, 28/12/2004", correct version but date looks old? on the site Web of Toshiba the last BIOS (V1.60) is listed as: last modification 15/12/05?

    Does anyone know if the Bios allows more than 128 GB of disks?

    If the answer is no, what are my options? If I go ahead and copy the disk it will work as usual, but as a 128 MB drive? Later if a new Bios is published, allowing disks of large capacity will be the full space available or should I take a disc image, reformat the hard disk and then copy the image (only have a record of this great would mean that I have to use another PC to achieve this).

    Its a real pain, ideas or thoughts?

    Many thanks Tony

    Laptop: P10-304 running XP Home.

    Hello

    I m not 100% sure if it has something to do with the BIOS.
    I think that it s simply a matter of calculation.
    HDD dealers calculate with 1000 and they must calculate with 1024. But the difference is still to oversized

    Please also check the size of the HARD drive in the other sense. After the fixing of the external HARD drive, you could right click on the HARD drive and check the properties.

    BIOS:
    Y, please read the more info section. You'll find info that the 1.60 BIOS update is only for the satellite P10 series models that contain "PSP13E" or "PSP16E" in the model number and version 2.0 of the BIOS update is only for the satellite P10 series models that contain "PSP10E" in the model number.

  • Satellite P10-304 - update Windows 7 problem

    I have a Satellite P10 304 to 2003 which has Windows XP, but I need to update for obvious reasons. I bought a copy of Windows 7 (32 bit) and installed without any installation problem, however I can't update Windows.

    I reinstalled, deleted the hard drive and reinstalled again. Tried the stop and start the Windows Update utility.
    Downloaded the stand-alone Windows Update.

    Updated the BIOS to V2.0 and downloaded the Toshiba Service Station application (who says no update is necessary).
    All this without success.

    My hopes were raised when I saw that the Station Service for Windows 7 32 bit software was available for the P10 304 but I am now at a loss.

    Anyone know if this laptop can be upgraded to Windows 7 and how to get updates of work?

    Help is welcome.

    Peter

    I'm sure that installation of Windows 7 update problems are not specific to Toshiba problems even if you use the Toshiba laptop.

    From my point of few, you should check the Microsoft support pages to find the solution.
    For example this:
    http://Windows.Microsoft.com/en-us/w...#1TC=Windows-7

    Just a tip: I had some problems in the past to install updates because of the antirust software. He locked the installation of some essential updates and after you disable temporal, updates could be installed...
    Missing Service Packs might concern the single installation of patches.

  • Satellite P10-304 - replacement of the drop-down list

    Will SR-2512 in a P10-304 work.

    Hello

    Call the partner in your country. They can give you more information about the compatibility of the discs.

  • Satellite P10-304 combo DVD drive replacement

    I need to know what combo dvd/cd-rw are compatible with my p10-304. It came with a sd-r2412, but it does not read DVDs more. I'm trying to get a replacement, but I must be sure that it will fit and work. can someone give me a hand? Thank you

    [Edited by: admin January 22 06 09:03]

    Hello

    You can find compatible readers on this site
    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/options_and_accessories_search.jsp?z=16&service=EU & selOptionCategory = 4699

    for example the modular Bay DVD-R/RW Drive (PA3295E-1DV2)

    Good bye

  • Satellite P10-304 - memory upgrade

    Hello

    could someone tell me where to buy additional memory for my laptop?
    It has 256 MB. At the time were reading autour is better and possible to just buy a 1 GB and remove 256 and put in the same dwelling.

    Thank you any help welcomed.

    Hello

    Satellite P10-304 supports the * 200-pin PC2700 (333 Mhz) DDR SODIMM * modules.

    It seems that it would be possible to upgrade to 2 GB RAM max and that's why you can use 2 x 1 GB modules.

    Welcome them

  • Satellite P10-304 - need driver for "multimedia audio controller".

    Hello

    I had to reinstall the operating system on laptop Satellite P10-304 PSP10E ORCJM-EN, but I do not have the drivers for the hardware. I can't find the drivers for the "multimedia audio controller" on the Toshiba site:
    NES http://UK.Computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?service=UK&mode=allMachi & action = search & teddProduct = 526 & selShortMod = 356

    All suggestions will be welcome.

    Thank you very much
    Mark

    Hello Mark

    I guess what you're missing is driver sound.
    Please also check document Setup Instructions and install all the stuff after this installation order. It is very important.

  • Satellite P10-304: bad sectors on the disk - how to fix?

    My drive HARD drive bad sectors developed and replacement needs, does anyone know how to do this?

    My model is a P10-304.

    In addition, Windows will not start upward in my old HDD because of bad sectors and the drive is protected by Norton and back, does anyone know how to bypass or disable round trip

    Hello

    I found these tips how to disable the Norto Go Back tool.
    You can uninstall it from your computer, disable GoBack to your laptop press 'space' GoBack screen button and select the option "disable" GoBack.

    Follow these steps:
    1. reboot your computer.
    2. when the Norton GoBack splash screen appears, press the SPACEBAR.
    3. in the Norton GoBack boot menu, click on disable.
    A message informs you that disable Norton GoBack erases history and you will not be able to run the hard drive or hard disk restore advanced restore until Norton GoBack is turned back on.
    4. click on Yes.
    5. click on continue.
    Your computer restarts automatically, and Norton GoBack is off
    After restarting the laptop, I recommend once again using the following key: CTRL + ALT + G.
    Immediately press on and hold the keys Ctrl + Alt + G after restarting the laptop you. A message you giving the possibility to force the removal of GoBack master boot record. Press F to force the removal of GoBack master boot record.

    If failure of keys Ctrl + Alt + G in the first time then try this again for three or four times until you get the prompt to remove the master boot record of GoBack.
    Finally, restart the computer.

    To fix bad sectors on the HARD drive, you could boot from the XP CD to use the console of "repair".
    And then use the CHKDSK /p command to repair the bad sectors.

    Good luck

  • Want to upgrade RAM HDD & on Satellite P10 - 304

    Help, please

    I have a Satellite P10-304. There is only a tiny 256 RAM and 30 GB hard drive.
    Can I put both?

    I was looking to upgrade to 2 GB ram at least and 120 to 160 GB of hard drive.
    Looked at the pc world, I know not which is compatible with mine.

    Thank you

    Hello

    Of course you can upgrade this P10.

    The RAM can be upgraded up to 2 GB and you use PC2100 DDR - RAM modules.

    I think that the laptop supports the HDD IDE ATA-5 and in my opinion, you would be able to update with 100 GB or 120 GB HDD

    Concerning

  • Need drivers for Satellite P10-304

    Hi all

    I was wandering if someone could point me in the right direction.

    I bought a second hand satellite P10-304, had to replace the hard drive and operating system and now need drivers. Unfortunately the P10-304 model doesn't seem to be on the list of drivers.

    If someone could let me know what letter it is or it is a pro, etc, I would be very grateful.

    Thanks in advance

    Steverino

    Hello

    All drivers for older models of laptops you can find under http://eu.computers.toshiba-europe.com > support & downloads. But please, under product type choose ARCHIVE. In the lower corner you can find the label with the exact model number. This model number must be set to download under Model No short option page.

    If you have any other questions please post again.

    Bye and good luck!

Maybe you are looking for

  • Download a picture of Mac or PC to the iPhone

    How to make a picture on my PC or Mac for my iPhone?

  • black screen appears in windows movie maker

    My windows Movie Maker allows to work properly, I have windows vista, but this last year, when creating and previewing my film but nothing black screen appear instead of my movie... Don't know what happened. Even if idon't preview I will burn the dvd

  • Window Media Player - print playlist / cannot burn CD playback.

    I use Window Media Player-how can I print a playlist I created. I can't copy in MS Word for example. Also when I burn a CD, it will play on my computer but not my home CD Player - how do I fix this? Thank you

  • What to do when you try to read PDFs on my Windows 7

    I can open PDFs on my Windows 7, but it is incomprehensible.  I have Adobe Reader XI, but I see on different cats that I have to download another piece of info to correct the problem.  Any suggestions?

  • Can I uninstall the mail application?

    Original title: I can just De-install Mail App? I don't understand the mail app. He opens the email to show you what you received on the tile. How to avoid to spam? I read the entry to go to the main Messaging page, but then what's the point of the a