P25-S5093 cannot read DVD + RW

Similar Questions

• Portable Satellite 1800-750 cannot read DVDs that require files avi (codec)

  my laptop satellite S1800-750 cannot read DVDs that require avi (codec) files. l have updated dvd drivers and upgrades of my multimedia player of series 10, but nothing helped. I need emergency aid.

  Hello

  I suggest, that it can not ONLY play .avi files. Am I wrong?
  In this case, you need additional codecs.
  This has nothing to do with the DVD drivers or firmware.
  Check the internet for the codec. I'm sure you will find a lot of info if you want to google a bit.

  Good luck

• My DVD has stopped working "cannot read DVDs Please decrease the current resolution.

  Original title: DVD

  My DVD has stopped working - error that says: cannot read DVDs Please decrease the current resolution and ensure that the connection of display type is taken care... Help!

  Hello

   
  What program you're using to play the DVD? Mention the name of the program?
   
  Try to play the DVD with Windows Media Player , and let me know if you get an error message.
  Play a CD or DVD in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows7/play-a-CD-or-DVD-in-Windows-Media-Player
   
  Response with more information to help you.

• Windows media player error c00d1163 cannot read dvd

  error cood1163 cannot read dvd, says problem with copy protection with video from the dvd player and decoder card. recent problem was working before

  Please create a new thread for assistance. Don't forget to provide the exact problem in as much detail as possible, as well as all the error messages in their entirety and any other information that may be useful.

• Satellite A100-192: drive cannot read DVD or CD

  Greetings
  I have a problem with a dvd - ram engine in my book.
  When I insert the cd or dvd in the engine, it cannot read the media.
  The engine starts and runs disc twice or three times, then turn of.
  the engine is mast * one origin.

  Thank you

  Sounds like a hardware malfunction and in this case only the replacement will help.

• Cannot read DVD or CD error: "Windows Media Player cannot play this DVD because no compatible DVD decoder is not installed on your computer.

  Original title: I CANNOT READ THE DVD OR CD ON MEDIA PLAYER, IT is A what NO NOISE 'n' INSTALLED EITHER ALL THE IDEAS THAT DO?

  I HAVE PROBLEMS WITH THE PLAYER ON MY LAPTOP, I JUST GOT ALL OF THE DELETED CONTENT SO THAT IT IS FIXED AND I AM UNABLE TO PLAY DVDS OR GET ANY SOUND MEDIA PLAYER WHEN I ENTERED A DVD THE MESSAGE READ:

  "Windows Media Player cannot play this DVD because no compatible DVD decoder is not installed on your computer."

  ANY IDEAS PEOPLE? I THINK I NEED TO REINSTALL THE SOUND AND EVERYTHING BUT DON'T HAVE ANY IDEA OF THAT KIND OF THING OR WHERE TO GET IT FROM :( ANY HELP WOULD BE GREATLY APPRECIATED.

  Hi SARAH-82.

  The sound works fine when playing any video recorded or audio files on the computer?

  Method 1: You may need to download the audio effect plug-ins or ability of DVD in Windows Media Player, please visit the link below

  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-ins

  Method 2: You can see the steps mentioned in the article below

  Supported decoders MPEG - 2 software DVD in Windows Media Player for Windows XP and Windows Vista

  http://support.Microsoft.com/kb/306331

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Method 3: To the problem of audio or audio playback, you can follow the steps mentioned in the link
  Tips for solving common audio problems

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think

• Satellite Pro A40: CD-RW/DVD drive cannot read DVD

  Hello

  The reader combo CD-RW/DVD on my Satellite Pro A40 (14 months) stopped reading DVDs (DVD - R or the video, have not tried other types), although it can play DVDs some time. I've cleaned the disc by using a cleaning disc. I think the problem started when I upgraded the OS to WinXP SP1 to SP2, but not sure. I tried CD - R and CD - RW writing and no errors were reported, but the CD that result are unusable (can't be read in the drive, with the LED blinks a few times and then to infinity).

  Someone has an idea how solve this ptoblem? Thank you

  Richard

  Hi Richard,

  I suggest that you go the Device Manager on your laptop and then remove your devive DVD-ROM in the list. When you have done this and then select the option "Find new hardware" and allow Windows XP Reinstall the device and associate the appropriate driver.

  HTH

• Satellite 2410-603: SD-R2212 cannot read DVD-R or DVD authentic

  Hello
  can anyone help, my dvd player on my authentic satellite 2410 603 can't/wont read dvd - r or DVD IE Disney etc.
  DVD + r seem to be ok, someone has any ideas?

  Hello

  Strange. Check if the firmware update will solve this problem:
  eltype http://www.Toshiba-Europe.com/storage/PFT.asp?page=pft&NAV=ISH_ARC&model=SDR2212&spr_mod = COMBOSL & spr_model = SDR2212

• Satellite M30X - 102 drive TEAC DV-W24E DVD cannot read DVD movies

  Hello

  My TEAC DV-W24E DVD Player cannot play DVD movies. I try with several original movies, but some work others not.
  It seems that the new DVDs do not work.

  Thanks for help

  Hello!

  I always watch DVDs with VLC media player. With this player, you can also listen to music and he can play many types of files.
  [www.videolan.org]

  In addition, you should look on the Toshiba website for an update of the firmware. Maybe this could also solve the problem.

  Good bye

• DVD drive cannot read DVD - RW

  Hello

  This is my first time on the forum. Not used!

  I have a question.

  my dvd player reads and read DVDs, but when it comes to simple dvd rw it doesn't recognize or burn it on a dvd - rw.

  any suggestions?

  Hello

  Maybe this car doesn t support DVD - RW?
  What phone have you and what DVD player has this device?

• Satellite P100-10U preinstalled Vista cannot read DVD - event code 11

  After the work with my new Toshiba P100-10U system could not read DVD more, it is still able to read CD-Roms! In Device Manager, an exclamation point grey is visible.

  The event log indicates repeatedly "Treiber Der hat einen Controllerfehler auf \Device\CdRom0 found.", something like "the pilot detected error on \Device\CdRom0 controller."

  I installed the system again, but the wrong behavior is still there.
  The system has a carpet * a DVD-RAM UJ-850 s drive.

  I already checked the registry entry {4D36E965-E325-11CE-BFC1-08002BE10318}. There's no UpperFilter or UpperFilter attributes.

  Any idea?

  Thank for Kalle

  Hello

  I m really surprised because such error problem should be resolved after the installation of the new operating system.
  More as you already suggested the filter upstream and downstream in the registry key are mainly responsible for these strange drive problems.

  In any case, I recommend to remove the drive from Device Manager and reboot the laptop. After restarting again the operating system should recognize the CD/DVD drive again. You should see a message as new device has been installed or something like that

  In addition, it would be desirable to use a system like CCleaner repair program. It s freeware!

  Finally, you should check the registry again if the upper and lower filter exists and delete it.
  Don t forget to reboot the device.

  Good luck

• Cannot read DVD + RW or CD - r under Windows XP service pack 3.

  I have a Windows XP with service pack 3 and I am currently unable to read DVD + RW or CD - r on my computer.  The computer thinks that the disk is empty, even if the information is there and it works fine on other computers.  It * can * read commercially created the CD and DVD, however.  The only fix I can find is in the 899527 article which I'm unable to install since it was apparently incorporated in service pack 3 already.  I contacted the manufacturer of the drive and it seems to work fine according to them.  Does anyone know what anyone else that I can try to fix this problem?

  Thank you

  Shaun

  It is very likely that your optical drive needs a firmware update to play the new formats of optical media.  Please tell the forum the brand and the model of the optical drive and the make and model of your system if the optical drive is packed with it. We are not omniscient!  Information you provide; complete your answer will be...

• Solutions to the problem of CD/DVD drive cannot read DVD discs

  This article will tell you 3 ways to solve the problem of the CD/DVD drive do not read the DVD disc. Please the process step by step.

  Solution1. Clean the DVD disc

  If your Player cannot detect the DVD disc, the first thing you need to do is to clean the DVD disc. Use a soft and dry cloth (not painted) to wipe the disc from the center of the disc to the edge. Please take care to not to use a paper to clean the disc with a circular motion, it will scratch the disc.

  After cleaning, inert the DVD on the drive to see if it works, if the reader can't read the disc, use a cloth of cotton wet with water or alcohol to clean the disc. After the disc dry, inert re the disc on the drive. If the reader can read, the operation is complete. If this isn't the case, please turn to the option2.

  Option2. Check the disc to see if it has been damaged

  Draw the DVD from the drive and check if there are some scratches or small cracks on the disc. If the disc is damaged, please try another DVD disc to see if the drive can read. If the drive cannot recognize the new disk, there could be a problem with the CD/DVD drive. Please turn to solution 3.

  Solution3. Clean or repair the CD/DVD drive

  When a CD/DVD drive has been used for a long time, its ability to play disc will only get worse. Then, the reader can not read some discs, or blocking your computer in the middle of the reading disc. This is usually due to the aging of certain parts of the disc, CD/DVD player dirty.

  Open the drive to check if the DVD reader accumulates dust and dirt, if so, the cold air from the hair dryer allows you to clean the inside of the DVD drive. Be sure to not blow on the optical sensor orally, or clean it with a cloth of cotton with water or alcohol. After cleaning, insert a DVD disc on the drive to see if it works. If still no, you need to call the s command customer service or take the reader to a computer repair shop.

  Post edited by: Newhampshireguy

  Thanks for sharing your experience with us!
  I think your assignment might be useful to others here in the community.

• Satellite Pro M30: Cannot read DVD on DVD - RW disc

  I have can´t dvd´s read...
  I can burn but when I start to read, it shows me an error like this "E:\ is not accessible. The request cannot be performed because of an i/o device error."

  It s killing me, please help

  Hello

  The IO device error occurs if the drive has a problem with the disc or the configuration of your system (mainly a problem of disc).
  Peut-t DVD player play all DVD or just DVD serious?
  What burning software did you use?
  As far as I know, you should always logged out of engraving.

  Also if you need the DVD Shrink software please check this link:
  http://forums.Afterdawn.com/thread_view.cfm/192015
  http://forums.Afterdawn.com/thread_view.cfm/244972

  http://Forum.Digital-Digest.com/archive/index.php/t-45081.html

  Good bye

• Cannot read DVD on flea market Portege M300

  Hello.

  I wonder if someone can help me. I bought an flea market portege M300 and it's fine - however I could not create recovery discs that the option was not on the section Protect and Fix on Toshiba Assist.
  Now, I can't read the DVD.

  I guess that sort of resettlement was made but not with the toshiba recovery discs and so I can see I can play DVD CD or burn CDs. Does anyone have any ideas as to what I should do. Toshiba send me a recovery disc for the machine and so I was wondering if they would be on these discs and if I should wait until they arrive.

  Thank you, best regards,.

  Rachel

  Hello

  Does the drive support the function of burning?

  You can try to enter in the properties of the drive and select the recording tab.
  The option activate write to this drive must be marked.

  On the Toshiba Recovery CD, you will find an image with preinstalled operating system and all the Toshiba drivers needed and utility.
  If you want to watch DVDs if you need special software such as WinDVD or PowerDVD.
  These are applications of DVD player. I guess the WinDVD must be preinstalled on the image.
  To burn a CD s, you are also burning software. I advise to use a Nero.
  For me this is one of the best burning applications.

  You should try using different media. You should know that not all media are compatible and supported.

  You bought this laptop as a second hand unit, so it is possible that the drive is bad. Sometimes, if the drive cannot burn or read some of the media due to the error of calibration of lens. In this case there are not a lot to do to replace the drive.