P6310in: Cannot find the BIOS

Similar Questions

• Cannot find the BIOS for Satellite 1900-803

  Hello

  I have a Toshiba satalite s1900-303 (model number-ps192e-00g1n-en) and I'm not.
  I have somehow locked myself out of the laptop. I used to haver a password to use the laptop. This password is not only for the bios, it is also necessary for the operation of the laptop.

  Somehow the password has changed and that's why I can't use the laptop at all. I contacted toshiba store and theyu said to use a loopback serial cable to fix it somehow and he also mentioned in an attempt to crush the bios with a new.

  I would like to try this, but I can't find the Bios or drivers. I was wondering if someone can help me solve this problem please.

  PS: When regestering on the toshiba site I had to enter the serial number for the laptop.
  The model under my name says 1900-803 when the sticker on the laptop clearly said 1900-803

  Hello

  > I have somehow locked myself on the laptop. I put a password for the laptop. This password is not only for the bios, it is also necessary for the operation of the laptop.

  I think that you have set the BIOS password.
  Unfortunately, the BIOS password can be removed from the laptop if you n t know the old password.
  You can not remove also the BOS password by updating the BIOS. If you would try to update the BIOS while the password is set then the ROM module flashes not properly and you laptop will not boot! It s dangerous!

  Only Toshiba authorised service provider can remove the BIOS password. Ask the technicians!

  PS: You book is a model of Satellite 1900-803 and BIOS, drivers, tools, etc. can be found on the European driver Toshiba page in * file Archive!

  Select * Archive Archive Satellite Satellite 19xx *.

  Good bye

• Omni 120: Cannot find the Bios Update

  Hi, my all-in-one not turn on. I know that this problem is in the Bios. But HP doesn't provide a Bios update file. The model is Omni 120-1156LA.
  There is solution to my problem?

  Thank you and sorry for my English

  Please don't Hat off for me on this score, it's my job only. Ship the AIO to the authorized Service Center is not a good option for my client in my country. I understand that somethings are difficult for the technician that I'll find the solution in the other side, im very thankful to you.
  Thanks for your time

• Satellite T110-11U - cannot find the router WLAN

  Hello

  I have a Toshiba Satellite T110-11U. Have had since February and loved it-fortunately it wireless used throughout the House. Then one day on a month, unless I was in the same room that the wireless router, Wireless does not work. I have 2 other laptops (and iPhone) which still connect wirelessly throughout the House and the garden without problem.
  As you can imagine, it was very strange. When I take in the garden, my other laptops are all networks wireless in the region, but my Toshiba can't find any.

  Suspecting it was a driver problem, I made sure that the wireless drivers are up-to-date. With no joy, I got the system as it was at the time of purchase (do a complete restoration by interupting, starting and leaving the hard drive to be deleted and reinstalled etc.). Still the same problem. I even changed the rooms in which the router is, and the same problem - the Toshiba cannot find the router unless the router is located a few meters from the laptop.

  Until I lose the will to live, can anyone suggest the cause of my problems, or is it time I admitted defeat and brought back to the Comet under warranty (where likely test next to a wireless router and tell me everything is fine!).

  Thank you very much

  Steve.

  Hey Buddy,

  Did you check if the wireless network card is recognized correctly in the Device Manager? There may be a yellow exclamation or unknown device. Try also updating the driver WLAN from Toshiba Web site:
  http://APS2.toshiba-tro.de/WLAN/

  See all other WLAN routers?
  The wireless network card can be activated using a combination of keys FN + F8 and in the BIOS. In the BIOS, you should also load default settings and test again.

• Win 7 Pro, FX6100, 8 GB of ram, 250 GB ssd; cannot find the system partition

  Basics are there.  It blocks from the tent to set up partitions.  I am giving all of the 250 GB SSD to use as seems it and it is just lost.  It does work with no partitions, partition of the entire disk.  He didn't tell me what he wants.  And error messages make no sense.

  They are like: (and my response)

  cannot find the system partition (do a stupid)
  Can not find the installation partition (crikey, I gave you the entire disk, make one)

  Talk about mega-frustration.  How about a useful error message and some useful ways to respond.

  >:-((

  If the ssd is not recognized in the first part of the installation process, as a location to install win on, you need to check the manual of the card mother about all the necessary bios for its port settings, or weather, you need to install any third-party disk controller.

  And if it's a new ssd, must not contain any partition table, unless you have prepared this ssd when you started in one of your other installations win, that can be part of your problem.

• Cannot install VMware ESXi 4.1 "cannot find the image of the installed system.

  Started in iso ESXi 4.1 downloaded, burned on a CD, CD, go to the screens, press F11 to install.  Immediately get the following error:

  -

  ---

  The installation operation failed!

  The installation operation encountered a fatal error:

  Cannot find the image of the installed system.  This is due to the image being not mounted correctly or the CD-ROM not supported.

  -

  ---

  The material is a system of handcrafted with Intel DQ35JO Council, latest version of the BIOS, Intel E6850 CPU, 8 GB of RAM, 2 SATA drives.  I know this isn't on the list compatible but is a 'white box '.  I installed ESXi 3.5 on it in the past and got it working, and I saw other success stories with this Board/CPU.  Yes, I have activated the virtualization mode in the BIOS and powered down/up.

  Here is what I tried:

  -Redownload VMware-VMvisor-Installer - 4.1.0 - 260247.x86_64.iso to ensure that it was not corrupt (2 copies, against perfectly)

  --Also tried another drive (IDE) CDROM

  -Created a bootable USB using uNetBootin 4.7.1 and booted from it

  -Switched SATA setting in the BIOS from AHCI to IDE

  I get the same exact error.  I searched here and everywhere and don't find any reference to this error.

  Help - all do you offer for my next step?

  Have you had a previous vSphere installed on your system?

  I had the same error on my 'white box' (in fact, it is black).  I used to run esxi 4.0 (u2) on my Acer X 3300 (6 GB, Quad Core AMD Athlon II).  Controllor internal SATA is not supported, but it allows me to use the box for normal windows task and ESXi is sitting on a SDHC 4 GB flash card.

  When I started my freshly burned ESX4.1 cdrom, I got the same error.   I thought that the fact that maybe there was an existing install on my destination drive (the flash memory card), and that the CD could not perform an upgrade.

  So, I tried the upgrade path (first trying to utility of the host and the .xml error message).  After reading the manual, I did the upgrade from 4.0 to 4.1 using the device of vMA and I must say that esxi 4.1 works great on my white box.

  Then I suggest that you try upgrading and see how far that gets you.

  Good luck (and a beautiful weekend)

  Marino

• ESXi 4.0 Dell T105 "cannot find the boot partition.

  Dban Nuke used to wipe my hard drives (two of them).

  Unplugged the secondary hard drive.

  Installed ESXi 4.0 (declared success).

  Machine starts, starts in ESXi 4.0, starts to load, then:

  "Cannot find the boot partition.

  Others have suggested to set parameter SATA AHCI controller. Not possible in my BIOS. I 'ATA Mode' and 'Off '. "Off" turns off the entire controller and my hard drive is not recognized.

  Others still suggested to install on a USB key. Wary of such a hack...

  Help, please. There is very little out there on ESXi 4. Even a pointer to VMware documentation with a list of error messages and their meaning/solutions would be helpful (unable to find such a list myself).

  I had the same problem that others are with the start-up for the drives. I went with the USB boot and it works very well because it has an internal USB port, it works even better because I'm not burn an external port. I use an older version of BIOS that does not start USB ports have enough fast for the key USB is recognized from a cold start *bummer* but not a big deal. Once this is done, I'm off the coast and run very well.

  I would recommend going this way until someone comes up with a better alternative, which I would be interested in doing.

• I tried all these steps and still no progress, cannot update or restore my phone. When you try to restore an error appears saying 'cannot find the phone (9).

  I tried all these steps and still no progress, cannot update or restore my phone. When you try to restore an error appears saying 'cannot find the phone (9).

  We do not know what are the following steps, because you have not provided their. Support this article has suggestions for your specific error code.

  If you see errors 9, 4005, 4013, 4014, when you restore your device iOS - Apple Support or

• Cannot find the seetings camera

  Cannot find the camera settings in firefox os smartphone

  Hi sanatankumarsahu,

  What settings to configure for your Firefox OS device camera?

  There is no specific menu of camera settings, but depending on your device and the version, you can choose another camera, turn flash power or reset the focus.

  Please reply to this message with your Firefox OS as well the version and the Build ID device model so that we can give you a definitive answer.

  Thank you

  -Ralph

• Cannot find the function edit that was on my old computer and firefox. When you click the Firefox icon, you can collect the text that has been deleted.

  Cannot find the function edit that was on my old computer and firefox. When you click the Firefox icon you can extract the text that was deleted by accident.

  Hello, you can press the alt key to display the menu bar with the Edit menu temporarily. or you can press ctrl + z which is the shortcut for "undo"...

• Message "Safari cannot find the server.

  In all these days, I get a message 'Safari cannot find the server' on a regular basis despite the fact that I'm connected to the internet and the server is a real server, such as Google or other sites that I use all the time.

  Is there something funky past with Safari that it would suddenly start happening?

  1 disable Proxies if selected.

  System Preferences > network > advanced > proxies tab

  Unlock the lock if you have to.

  Under 'Select the Protocol', uncheck if checked.

  Click 'OK' and then 'apply '.

  2. If this does not help, run EtreCheck and post the report here.

  http://etresoft.com/etrecheck

  Download, open the download folder, click on it to open it and select "Open" in the dialog box to execute.

  Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste it when replying.

• "Safari cannot find the server.

  I have not had this happens in another version of Safari, but since the update more recent (9.1.1 on May 17, 2016), I get the following message several times a day: "Safari cannot find the server. Refreshing the page does not help. After I visit some other sites, I am able to connect to those that I had a problem with. Most of the information I could find going back five or more and seems not applicable. It is not necessarily the same sites that don't load. It is random and occurs throughout the day. It's annoying and sometimes embarrassing, but I'm dealing with it (I didn't wish)!

  Does anyone else have this problem? Is this a bug in the latest version of Safari and there at - it an easy fix? Any advice will be greatly appreciated.

  Thank you.

  Hello

  Could be a cookie problem...

  In your Safari menu bar, click Safari > Preferences then select the Privacy tab, then click: delete all data Web site

  Quit and then restart Safari to test.

• Setup error "the system cannot find the specified file" (hpzprl40.exe)

  Trying to install HP Photosmart c5180 all-in-one using the latest version of the software download at HP and have Windows 7 Asus desktop computer. Receive error install "the system cannot find the specified file" (hpzprl40.exe), and the wizard stops.  Help, please.

  Hi loveisus,

  Try using the brush included in the CD or download. Let me know what you find?

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. run the uninstall_L4 (exe or Bat)

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-76232-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 1153481 & sw_lang=.

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. run the uninstall_L4 (exe or Bat)

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-76232-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 1153481 & sw_lang=.

  10. run the download to reinstall the printer

• Often, I get the message error "Firefox cannot find the server.

  Often, I get the message error "Firefox cannot find the server. Page normally, refresh the page to load, even if sometimes it takes more than one try.

  I checked my connection settings. IPv6 and DNS prefetching are disabled, according to the recommendations in this article: https://support.mozilla.com/en-US/kb/Firefox%20cannot%20load%20websites%20but%20other%20programs%20can?s=Firefox+can%27t+find+the+server+at & r = 1 & as = s

  See also:

  • http://KB.mozillazine.org/Error_loading_websites
  • https://support.Mozilla.com/kb/error+loading+Web+sites

  You can try to reset (power off / on) of the router.

• Access cannot find the macro

  Hello everyone!

  I have a damaged database. I decided to try to restore. VD, I created a new database and imported all the tables, queries, forms, reports, macros of corrupted to the new database.

  However, when I try to open most of the forms, I get the error message:

  "Microsoft Office Access cannot find the macro 'TrackDBaseForms '.

  The macro (or its macro group) does not exist, or the macro is new, but has not been saved... »

  This basis has worked for a year, and I never had this problem. A Google search returns no results. However, it is obviously not in the macros page, or in any code I can find.

  I have supports this database for a year and have never encountered this missing macro. A Google search returns no results, so I guess it's something that the developers at the beginning. However, it is obviously not in the macros page, or in any code I can find.

  The corrupted database is such a State that it will not be open to all: the main form that is set to open at startup corrupts. MS Access 2007, size 500mg.

  Thank you!

  Have u tried looking for hidden objects?
  Go to Tools/Options and view the hidden objects to open the database without starting.  You can press the SHIFT key , and then open the DB. Note You may need to do this a few times.

  I hope that this recommendation will help you. In extreme cases, you can restore the data file via the repair tool of ms access as the Access Recovery Toolbox . http://www.oemailrecovery.com/access_repair.html