P7-1205: nore multiboot install only one operating system

Similar Questions

• had to install the new operating system and bookmarks are gone

  Hiya. I had problems with the computer and the fix was to install a new operating system (windows 7 it was old, windows 8 is the new). Most of my old files make the switch, but when I downloaded firefox, my favorites have disappeared. I looked in my profile in the menu, but it's the profile that I created today by downloading firefox. Where can I find my old profile? Any help is greatly appreciated! Thank you, Billy

  Was this an upgrade of type "on the spot" where your user folder

  C:\Users\youroldusername\
  

  was intact, or did you end up with a new user folder? In the case of a new user folder, you will find a folder named

  C:\Windows.old\Users\youroldusername\
  

  If so, your Firefox data are probably here - and here's how I suggest to access:

  First of all, it would be useful to set windows to display the hidden files and folders. This article has the steps: http://windows.microsoft.com/en-us/windows/show-hidden-files

  Then click in:

  Username\AppData\Roaming\Mozilla\Firefox\Profiles C:\Windows.old\Users\

  Note: there is a cache under AppData\Local folder, but everything important is under AppData\Roaming.

  Here you can find one or several folders named random semi. Who has most recently updated content is probably one you want to restore.

  This post has my suggested procedure to resurrect these data in your new installation of Firefox. Please note the use of the copy instead of move throughout the process. This allows you to try again if it fails somewhere along the way.

  https://support.Mozilla.org/questions/1024189#answer-638319

  A little luck?

  Note that if you really ONLY want to bookmark, copy the last two backups of the old bookmarkbackups folder to a location such as the desktop, see the following article (you will use 'Choose file' in the menu to access these backups): restoring bookmarks from a backup or move them to another computer. Note that this process will replace all new bookmarks that you may have saved since installing Firefox again. If you need to preserve those, first use the export feature: Export Firefox bookmarks to an HTML file for backup or transfer bookmarks.

• My computer has been infected recently with Sirefef (AB and W variants). How will I know if I do a backup/clean install of the operating system or not?

  As says the question: my computer has been infected recently with Sirefef (AB and W variants).  How will I know if I do a backup/clean install of the operating system or not?

  I'm running a full system scan in ESM right now, and it has detected multiple instances of sirefef.   I have remove as they pop up, but I'm afraid that when I run another scan they all will always be there.  Is there a way to know if MSE is actually remove them and he cleaning?  If not, should I do a back up and reinstall the OS?

  Thank you.  I can choose to try this, however, I would like an answer to my other questions first.

  Sirefef is a rootkit and yes he can hide in your system.  This is why it has been suggested that you may need to reformat/reinstall.  In fact, it's the only way to eliminate malware.  Multiple scans with several scanners and no conclusion malware probably indicate he disappeared, but the key word is "probably".  Malwarebytes is good and what he finds now may be traces of the infection, but what he finds perhaps not active more - it is always good to run the scans so.

  What spare drive did you run?  What scanners did you use?  See again you and follow the guide "Malwaretips"?

  For the firewall problem, you can try the following Microsoft Fixit.

  Diagnose and automatically fix problems of Windows Firewall service

  http://support.Microsoft.com/mats/windows_firewall_diagnostic/en-us

  One of the users of the Forum answers maintains that a great guide on information security is important for understanding the removal of malicious software.  See the following compliments of Brian M - for suggestions on how to solve your problem: http://www.selectrealsecurity.com/malware-removal-guide/#after see: after the removal process and solve the problems of Post disinfection

  Uninstall/reinstall of MSE is how?  All the problems?  Have you tested MSE with eicar to be sure it's working?

  Assume that you have not had an opportunity to review the MSE Installation Checklist or you would have noted that MSE and Windows Defender cannot be used on the same computer.  So if WD works in fact it means MSE has been disabled/not not work correctly or not installed.

  See the next WD re: Windows Defender and Microsoft Security Essentials

  Good luck...

• DisplayLink Core Software cannot be installed on this operating system - Dynadock

  I have an other laptop manufacturers, and I want to use it in my home office, I bought a Toshiba Dynadock. I installed the software and, during this process, a message is displayed as follows:

  "DisplayLink Core Software cannot be installed on this operating system"

  I have Windows XP Professional, version 2002, service pack 1

  I checked my Services and DisplayLink is NOT present. All other elements of the Dynadock work very well (keyboard, mouse, camera, network etc.), but the screen is blank and I have to use scren laptop which goes against the whole object to have the Dynadock first!

  What can I do to load this software? Are there settings that I can change to allow the DisplayLink load?

  Any help welcome!

  Hello

  I'm not expert Dynadock but one thing is very interesting. According to your assignment, you use Windows XP Home SP1 edition. I wonder what will happen if you have installed SP2 with all latest updates.

  I don't know about you, but maybe you really need to install SP2. I don't see any other reason why this software cannot be installed.

• When installing a new operating system isn't automatically wipe the hard disk, create a new partition, and then install the operating system?

  Have a Dell system, caught a virus and it has really messed up the PC. Recently, it got worse so I tried to reinstall the operating system with the Dell disks. It wouldn't work. So I bought for Windows 7 Professional, it will not be installed. My first question when installing a new operating system isn't automatically wipe the hard disk, create a new partition, and then install the operating system? Because this does the same as the Dell disks, is to take what is on the hard drive and put it in a folder called windows old, is not formatting the HD. When I boot the disk, it shows the installation of files then open windows and start the installation. Before he could finish I get an error missing or corrupted files. Tried several times now, windows will still not open. Any suggestions? Once while trying to install the pc crashed with a blue screen which is one of the reasons why I have reinstall the OS, he started to plant a few times. I don't remember all the details on my PC, but its 4 years, triple core coprocessors, ram 8 GB, 500 GB HD. At the same time just after all this started in Jan. I had also improved my 3 GB to 8 GB memory. I bought the Dell memory for my system. Since the crash, could there be a problem with these new memory chips? Last night I tried to disassemble each and reinstalling it, but that doesn't seem to make a difference. Before I tried to reinstall the operating system, the pc was see the concert 8.

  Original title: used to install Windows 7

  Disconnect any other (additional) internal hard drives and external USB devices.
  Look for any loose hard drive power or cables SATA, graphics card or other power cables.

  First run Memtest86 +:
  It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), so no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Hard drive test:
  If you do not know your readers of the brand and model, try "Speccy",.
  It provides information from the computer/system in detail:
  OS, CPU, RAM, motherboard, graphics, Hard Drive, optical, Audio, peripherals, network.
  Note: Option RAM indicates number of slots, DRAM Timing.
  Works your memory speed (frequency). The nominal frequency of your memory.
  http://www.Piriform.com/Speccy

  Test your player - create a Bootable CD:
  Ranging from 5 to 25% (depending on the make and model) new hard disks are defective.
  Note: Reliability of the drive hard has come the way down over the last 24 months and improved a bit lately according to manufacturing.

  Test your drive with the car manufacture utility.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors.
  SeaTools for information: http://www.seagate.com/support/downloads/seatools/
  SeaTools for Windows download: http://www.seagate.com/support/internal-hard-drives/enterprise-hard-drives/saturn/seatools-win-master/
  SeaTools for DOS download:
  http://www.Seagate.com/support/internal-hard-drives/consumer-electronics/LD25-series/SeaTools-DOS-master/

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm

  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who believe that having a brand Toshiba Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities

  Notice of Fujitsu drive management utility: http://www.fujitsu.com/us/services/computing/storage/hdd/

  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  Also check Home Edition free Partition Wizard option "Test of disc surface":
  http://www.partitionwizard.com/free-partition-manager.html

  J W Stuart: http://www.pagestart.com

• Trouble installing the guest operating system

  All,

  Having trouble installing the guest operating system - Windows XP SP3. I followed the directions of the booklet that I try to boot from a local image and a CD. I can't able to get into the setup of the BIOS to start the virtual machine when you press F8. I am currently on a decentralized network that starts his BONES from a PXE server. When I turn on my VM, its shows the boot process than my actual desktop. I tried many configurations, but still problems. All instight would be useful. Thank you.

  Welcome to the forums!

  To enter the VMWare guest BIOS press F2, no F8.

  You can also add 'bios. BootDelay = 10000 "in the prompt .vmx file. This gives you more time to press F2.

  The virtual guest has a CD-ROM attached to it?

  Is it "connect to turn on?

  Is it connected to the physical machine (where the OS CD is inserted)?

  AWo

  VCP 3 & 4

  Author @ vmwire.net

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• Laptop HP Pavilion DV2000: install a new operating system on old laptop

  I have the laptop model is consistent with the provisions, it's old, I know.  It seems not to have an operating system.  How to install a new operating system without knowing which key?  It is said that it was Windows Vista.

  Is this a good version to go with?  Can I install a new?

  Hi @melba35,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked into your problem on your computer HP Pavilion dv2000 CTO Notebook is compatible with Windows Vista 64-bit. Here is a linkto Microsoft to find product key most of the time it is on a sticker on the laptop.

  You can also order discs here.

  Please let me know how it goes.
  
  You can say thanks for trying to help, by clicking on the Thumbs Up below! .
  
  Thank you.

• How to install a second operating system on a partition on the same hard drive under xp?

  Hello!.. How can I install a second operating system on a partition on the same hard drive under xp?... Thanks in advance!

  With the elders the older operating systems, in this case 98, has prior installation.

  Is that of Vista as soon as it does not matter what operating system is installed first to do a dual boot.

  With Vista, you can then install XP as the second installed the operating system in a dual boot.

  But this isn't like you do is 98 or XP...

  See you soon.

• Windows 10 can be installed as additional operating system in addition to Windows 7.

  OT: Dual OS.

  Windows 10 can be installed as additional operating system over Windows 7 so that the two operating systems can be stored on a laptop ?

  Will I be able to choose a different drive or partition where I installed upgrading?

  No, it will take you run an earlier version of qualification and start the update of the release candidate.

  I want to dual boot instead of replace my current version of Windows.

  If you need to install 10 Windows on a partition or separate hard disk, you will need to purchase a full license.

  Retail price of price information:

  Edition	Price
  Windows 10 home	US $119
  Windows Pro 10	US $199
  Pro Windows 10 Pack	US $99

  https://www.Microsoft.com/en-us/Windows/Windows-10-FAQ

• If I buy windows 8 (any OS windows) now and install in my computer and after a year when I change my computer, can I install the SAME operating system in the new computer?

  If I buy windows 8 (any OS windows) now and install in my computer and after a year when I change my computer, can I install the SAME operating system in the new computer?

  You can if you buy a commercial box full of Windows 8 version.

  If you buy a computer with Windows preinstalled, or a version OEM of Windows 8, 8 No, you can't.

  If you buy a version upgrade, you can, as long as the new computer has a licensed version earlier of Windows on them.

• I got the message that I am running one operating system is no longer supported by Photoshop?

  Hello.

  I am trying to download the trial of 30 days for Photoshop and Illustrator and I get the message that I am running one operating system is no longer supported by Photoshop. Go to system requirements (or something like that because it's in Danish and you will see a list of all the supported platforms.)

  How do I do that?

  Thank you very much!

  Hello

  Please see system requirements | Photoshop

  Hope that helps!

  Kind regards

  Sheena

• During the installation of Acrobat DC why do I get a configuration error, saying: it cannot be installed on this operating system?

  I welcomed CC updated XI Acrobat Acrobat DC.  I bought DC Acrobat but serial number does not work with the version installed by creative cloud.  And when I uninstall this version, downloaded Acrobat DC installation generates an error indicating that the application cannot be installed on this operating system. I lost my money by buying the download?

  Previously titled:

  How to install a downloaded version of Acrobat DC purchased with a serial number allocated, when I get a Setup error, saying: it cannot be installed on this operating system? Creating cloud had already updated Acrobat XI in DC, but will not work with the new S-N

  Allan, please see: download Acrobat products | Standard, Pro | DC, XI, X. Please check the system requirements for | Adobe Acrobat Pro DC, Adobe Acrobat Standard DC

• Bought Office Acrobat 11 DC Pro to my PC running Windows 7 - I have more than enough RAM and storage, but get the message: "this application cannot be installed on this operating system. The installation program will end now. Please refer to the minimum s

  Bought Office Acrobat 11 DC Pro to my PC running Windows 7 - I have more than enough RAM and storage, but get the message: "this application cannot be installed on this operating system. The installation program will end now. Please refer to the minimum requirements to... "Can't determine the location on the Adobe Web site to get answers. Any suggestions?

  I deleted an earlier version of Acrobat Pro from my computer. Still, I get the same message.

  Hi John,.

  Please specify if you have purchased DC Acrobat or Acrobat 11 or upgrade you to the latest patch for Acrobat 11, that is to say 11.0.11 so that we can help you accordingly.

  I wonder if you have checked your system requirements before you download Acrobat.

  I would also ask to share with you the screenshot of the error message with us.

  You could probably uninstall Acrobat using cleaning tool. Here is the link for the same thing.

  http://labs.Adobe.com/downloads/acrobatcleaner.html

  If you were installing DC, check out the following link to download.

  https://helpx.Adobe.com/Acrobat/KB/Acrobat-downloads.html (classic)

  https://helpx.Adobe.com/Acrobat/KB/Acrobat-DC-downloads.html (continued)

  Concerning

  Sukrit diallo

• My hard drive crashed and the only disk operating system that I can find is my Windows 7 upgrade disk. Can I do a full install on a blank disc of this?

  My title pretty much sums up my problem.

  I need to buy a new hard drive.  All I have is the Windows 7 upgrade disk I bought for some time.  I can the Windows 7 installed on this drive, or I have to buy a copy of Vista/XP to install and upgrade?

  If your computer comes with a qualifying previous license such as Windows Vista or Windows XP and the certificate of authenticity is still attached to the machine in good condition, then the COST is reason enough to represent the compliance to the software license agreement. No previous required software installation, which means you can do a clean install with Windows 7 Upgrade disk.

  How to do a clean install with upgrade disc:

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Do not open programs after installing Windows update operating system Windows Vista

  Original title: MS Office programs do not open after installation of Windows update to Windows Vista operating system

  After having decided to install the Windows Update my computer told me was available all my software as my programs MS Offfice is no longer open.  I don't know what to do.  The only thing that still works is the Windows Media Player.  I can't open Word or Excel, I can't access my photos.  Open Internet Explorer is like a weird nightmare but I am able to access the Internet.  I tried reinstalling my MS Office software, which did not work.  I have no idea what to do to solve the problem, but I need my computer back. It was good except for its slow, when I open certain programs, now I can't access something.  Any ideas what I should do to correct the nightmare?

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  For questions of office:

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Office at the above link forums

   

  Theywill help you with your office questions when repost you in the Office Forums above.

  See you soon.

  Mick Murphy - Microsoft partner