P7-1298cb: Multi-color flickering lines in columns displayed on the screen after upgrade Windows 10.
I upgraded Windows Windows 8.1 1O. I've updated the drivers. The monitor multicolored poster of fine lines in columns. The lines of twinkle randomly. The monitor is a diagonal LED of 2711 x 27 inch HP (XP600A) screen. It is not that there is a specific monitor for Windows 10 driver. Any suggestions on how to fix this?
HI @TLL2016,
Thanks for getting back to me.
There is no update BIOS, but there is more recent graphics driver.
Here is a link the download AMD UMA Graphics Driver.
Just to check the monitor, here is a document for display quality problems.
Please keep me informed of the progress of things.
If you need help, let me know and I will gladly make all that I can to help you.
Please let me know if that solves the problem by marking this post as "accept as a Solution.
To simply say thank you, click the Thumbs up below!
Thank you.
Tags: HP Desktops
Similar Questions
-
Multi-colored vertical lines on the screen until you restart
I get multi-colored vertical lines on my screen and lose control of the mouse. Power off and restart eliminate the problem. Y at - it a permanent cure?
Question seems closed. Lines no longer appear after you download a driver from the manufacturer of the monitor.
-
How to view the line of columns without using the pivot keyword
Hello
could someone help me how to display lines in columns without using the keyword pivot and actuall is my scenario, iam having two tables with names and examples of data is shown below
MIDDLE MINAME TASKID TASKNAME IDENTIFICATION PROJECT
1 PROJ1 1 AA 100 PR1_TASK1
1 PROJ1 3 CC PR1_TASK3 102
1 PROJ1 DD 4 103 PR1_TASK4
1 PROJ1 EE 5 104 PR1_TASK5
1 PROJ1 6 105 FF PR1_TASK6
2 PROJ2 EE 5 114 PR2_TASK1
2 PROJ2 6 115 FF PR2_TASK2
2 PROJ2 GG 7 116 PR2_TASK3
2 PROJ2 HH 8 117 PR2_TASK4
2 PROJ2 9 118 PR2_TASK5 JJ
2 PROJ2 KK 10 119 PR2_TASK6
2 PROJ2 1 AA PR2_TASK7 120
The output should show the project and County of tasks at a given stage as shown below
project AA BB CC DD EE FF GG HH JJ KK
1 2 0 1 5 3 2 0 2 1 0
2 1 2 0 2 1 0 2 4 3 1
Thanks in advance,
VVRCREATE TABLE pivot_test ( ID NUMBER, PROJECT VARCHAR2(10), MID NUMBER, MINAME VARCHAR2(5), TASKID NUMBER, TASKNAME VARCHAR2(10) ); INSERT INTO pivot_test VALUES (1, 'PROJ1', 1, 'AA', 100, 'PR1_TASK1'); INSERT INTO pivot_test VALUES (1, 'PROJ1', 3, 'CC', 102, 'PR1_TASK3'); INSERT INTO pivot_test VALUES (1, 'PROJ1', 4, 'DD', 103, 'PR1_TASK4'); INSERT INTO pivot_test VALUES (1, 'PROJ1', 5, 'EE', 104, 'PR1_TASK5'); INSERT INTO pivot_test VALUES (1, 'PROJ1', 6, 'FF', 105, 'PR1_TASK6'); INSERT INTO pivot_test VALUES (2, 'PROJ2', 5, 'EE', 114, 'PR2_TASK1'); INSERT INTO pivot_test VALUES (2, 'PROJ2', 6, 'FF', 115, 'PR2_TASK2'); INSERT INTO pivot_test VALUES (2, 'PROJ2', 7, 'GG', 116, 'PR2_TASK3'); INSERT INTO pivot_test VALUES (2, 'PROJ2', 8, 'HH', 117, 'PR2_TASK4'); INSERT INTO pivot_test VALUES (2, 'PROJ2', 9, 'JJ', 118, 'PR2_TASK5'); INSERT INTO pivot_test VALUES (2, 'PROJ2', 10, 'KK', 119, 'PR2_TASK6'); INSERT INTO pivot_test VALUES (2, 'PROJ2', 1, 'AA', 120, 'PR2_TASK7'); SELECT ID as PROJECT, SUM(DECODE(miname, 'AA', 1, 0)) AS AA, SUM(DECODE(miname, 'BB', 1, 0)) AS BB, SUM(DECODE(miname, 'CC', 1, 0)) AS CC, SUM(DECODE(miname, 'DD', 1, 0)) AS DD, SUM(DECODE(miname, 'EE', 1, 0)) AS EE, SUM(DECODE(miname, 'FF', 1, 0)) AS FF, SUM(DECODE(miname, 'GG', 1, 0)) AS GG, SUM(DECODE(miname, 'HH', 1, 0)) AS HH, SUM(DECODE(miname, 'JJ', 1, 0)) AS JJ, SUM(DECODE(miname, 'KK', 1, 0)) AS KK FROM pivot_test GROUP BY ID; PROJECT AA BB CC DD EE FF GG HH JJ KK ------- -- -- -- -- -- -- -- -- -- -- 1 1 0 1 1 1 1 0 0 0 0 2 1 0 0 0 1 1 1 1 1 1
-
My iPhone 6s has lines of black border around the screen. Is this normal?
My iPhone 6s has lines of black border around the screen. Is this normal?
A screenshot would help us see what you see.
-
When we turn on my wife's ipad, a box of red line begins to jump around the screen, and then a pale red stripe moves back on the screen. Any ideas on how to stop it? Thank you
The standard specifies:
-Reset the device iOS. Nothing will be lost
Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to
ten seconds, until the Apple logo appears.
-Reset all settings
Go to settings > general > Reset and tap reset all settings.
All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.
-Restore from backup. See:
Restore your device from an iCloud or iTunes backup - Apple Support
-Restore factory settings/new iOS device.
If still problem, make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.
-
HP Deskjet 3325 color inkjet printer not to proceed with the installation of premium window 7
Mr President.
HP Deskjet 3325 color inkjet printer not to proceed with the installation of premium window 7 installed hp laptop hp pavilion dv4. Please send me the solution to my email address * address email is removed from the privacy *.With respect,Tonia CENIA -
The very low vertical lines are coming up on the screen in 4 or 5 places on my KDL-65HX925
The very low vertical lines are coming up on the screen in 4 or 5 places on my KDL-65HX925. Sony India assistance team is subscript, but to change the Panel also did not help.
Now the expensive game is with the service center for over a week and they refuse to return the whole and execution of R & D with no idea. In India, it is better not to go for the set bonus from Sony because they are not able to provide support.
But people do you have any idea what is the cause?
I'm sorry to hear what is happening with your TV. Only a technician can diagnose what's wrong with your TV. Unfortunately, we are unable to help customers outside the United States. I suggest that get you in touch with Sony India help on this issue.
-
Color bar line at startup, and then black screen, then startup is very well
macOS Sierra - macOS 10.12 Beta (16A294a)
MacBook Pro (15 inch, early 2011)
2.2 GHz MacBook Pro (MC723LL/A)
Intel Core i7
Intel HD Graphics 3000 - 512 MB and AMD Radeon HD 6750 M (1024 MB) with automatic switching
Processor: 2.2GHz
16GB 1333 MHz DDR3 memory
Boot disk: 1 TB - Samsung 850 SSD
Graphics - graphics Intel HD 3000 512 MB & AMD Radeon HD 6750 M - 1024 MB
Here is the situation - when I initially push the power button - the display lights up, come up apple logo, bar starts to fill in through the screen start and the point 1/2 way, I get a strange color line (Fig 1).
Then the screen goes black for a second or 2 (photo 2).
Then start bar turns and ends. (photo 3)
Then I can connect. (photo 4).
Other that the newspaper in question, it doesn't seem to be any other question. Systems has passed Diagnostics. I have reset NVRAM & MSC.
Anyone know what is happening?
Any help is appreciated. I bought the MBP, used from a seller on Amazon.
Thank you.
I had this problem too, but it resolved now on the Apple store. They had seen previously on older hardware which has been updated for Sierra with FireVault market and occurs when the operating system is switching graphics modes. I got just my logic board replaced so wanted it is solved.
We have attempted to extinguish FireVault, but the question was still there. Then they have successfully installed a new copy of a Mavericks and the problem was gone. Then they installed a new copy of Sierra and the question is still missing. Now, I have re-enabled FireVault and the issue has gone.
-
Discovered lines with column names where the cell contains a value
I have a table with columns Additive_ID, A, B, C. Each Additive_ID has a single row.
I would like to write a query that returns a result set with two columns: Additive_ID and values. It will have up to three lines for each Additive_ID, with the values column that contains the name of the column in the source table if it contains a 1 for this Additive_ID.
What is the best way to achieve this?
(In fact, the source table contains about 50 columns.)Select additive_id, decode(A,1,'A') value from your_table union all Select additive_id, decode(B,1,'B') value from your_table union all Select additive_id, decode(C,1,'C') value from your_table
Here's a quick way to get all the SELECT to build the union:
Select 'Select additive_id, decode('||column_name||',1,'''||column_name||''') value from your_table union all' from cols where table_name = 'YOUR_TABLE';
Max
-
Satellite L650-14F - lines and streaks appear on the screen
I have a toshiba Satellite L650-14F PSK1LE, bought from a reseller of Romania last week and I have big problems with the video, I guess.
The scree Somethime closes and appears a few scratches on the screen and I can't use any command.
The blocking of the laptop. The only thing I can do is to close the laptop and re-open.
The display driver is installed. What is the problem?PS: Sorry for my language and we hope you understand
Hello
There are some common steps that should be made on the one hand;
-test new graphics driver
-updated the BIOS to the latest version
-recover the laptop to factory settingsIf the lines are still visible, you must connect an external display.
If the lines would be visible also on the external monitor, the graphics card can be affected.In this case, the part needs to be replaced.
But this is a job for a technician in ASP. -
Satellite M30-853 - vertical white lines or black spots on the screen
Hello
I have a laptop Toshiba Satellite M30 - 853 during nearly four years. A few days already, I'm having a problem that they come from the white lines vertical or black spots or screen is smear when I am trying to move a window from time to time. My wireless adapter is in use.
The vicinity of processor, video card and wireless network card are very hot. My cooling fan is starting and stopping, but I'm not sure of its effectiveness.
I disassembled the laptop to clean it if there is little to dust, but I found it in very good condition. Anyway, the problem persists and I am looking for decision. Someone told me that probably that's because of the defective video card memory. It's strange to me because the problem is not permanent it is often and if I try to cool the surface it disappears.
I'd appreciate any suggestions.
In my opinion, these issues must be verified correctly. This can be done using different diagnostic tools. It is important to know what the problem cases.
Of course, it has something to do with the temperature of material and graphics card. Sorry but I'm really skeptical, you can do something alone. Maybe you should seek professional help. -
M40-237: small lines up and down on the screen
I installed DirectX 9 c Feb 2006.
When I am playing a game, in the center of the screen there is little horiz. lines from top to bottom.
How can I solve this problem?Thanxs.
Hello
Before trying to solve it, you need to know why this happen. As far as I know, this camera comes with DirectX V9.0C. Have you had this problem before the last installation of DirectX?
Are these lines just at the time when you start the game or all the time?
-
monitor the display that is not right, when you move the slider it filled with blue, there are blue lines across screen
Hello
1 did you changes to the computer before the show?
2. the make and model of the computer/monitor?
Note: Make sure that the cables are connected properly to the screen and try replacing the monitor cable and/or monitor itself.
Method 1:
Resources for troubleshooting problems in Windows XP
http://support.Microsoft.com/kb/307960Method 2: Uninstall and reinstall the display drivers and see if that helps.
(a) click Start, right click on computer.
(b) click on properties, click on Device Manager
(c) expand the graphics card, right click on the map
(d) click on uninstall
(e) now go to your computer/device manufacturer site, download the updated drivers and install them. -
Add line does not if more than 5 records are displayed on the screen
Hi all
Does anyone know why the button Add line on a report of sql update would stop to insert an empty for data entry line when more than 5 records were entered into the form? I can insert up to 5 files. After this, a blank line is more provided by the button. Odd. Have any ideas?
Any help would be greatly appreciated!
MichelleHello
Change this:
Maximum number of lines: 15
TO:
Maximum number of lines: 1000 (or more)
Andy
-
Get the error ora-06550: line 1, column 28 met the symbol «;»
The code is:
create or replace procedure while (empid number, varchar2 lname) is
Meter number;
fact number;
Start
Select max (department_id) in terms of employees where employee_id = empid;
All counter < = loop 3
insert into employees (department_id, last_name, employee_id) values ((did+counter), empid, lname);
counter: = counter + 1;
end loop;
end;
/I think I got it. You named the procedure WHILE. And althouh everything IN is not a reserved word, but a key word, I'd stay away from that name. What is your version complete:
Select * from version of v$.
SY.
Maybe you are looking for
-
As I said whenever I open firefox I get 3 additional tabs to the home page. After that, whenever I hit the home button I get 3 more. Very fast, I got 1 million tabs and capabilities. I went to internet explore and connected and I have no problem. The
-
Re: Satellite A200 - 1 GB - strange ripples on the external LCD
H, When I try to connect my laptop to my Samsung 32 "LCD with VGA, I have strange ripples on the screen.I tried to change any settings in my computer and my TV and it's still there. How can I fix?It is almost impossible to look like that. Thank you.
-
How to have a while loop inside a structure of matter?
Hi all I would like to know how to control a while loop by using the structure of the case? I would like the person to check if the object has is in its original position or not. If this is the case, go... The object must then do its job, as mentione
-
I just want to thank Kosh (61 115 message) for instructions on cleaning the print head on a Photosmart 209! I did it, it worked, I can print in black again! Thank you, Kosh!
-
HP Deskjet 3050:4 x 6 photos
Why can't I get the printer to print a photo full size 4 x 6? What print is good, but doesn't fit all common frameworks...