P7-1410: no other LEDs

Similar Questions

• Equium P200D - reduce the brightness of the indicators before LED

  I have a laptop Toshiba Equium P200D-139, model number PSPBNE-004003KS model name.

  The façade has four LED indicator, color blue and visible on the screen open or closed. They are for the input DC power, battery, and HARD drive.

  _My problem and question: _

  Led lights are extremely bright. In fact, they are so bright that they are a source of severe distraction, especially in a dark room. I'd say it's clearly a design flaw. They must be performed in a smaller current, be placed behind a darker filter. * Is it possible to reduce the intensity of the LEDS using software? * I was wondering if a command-line script or something similar may be available to do this - I did once something similar to toggle the CPU fan on my old Toshiba Satellite CT 210.

  _Background: _

  I bought the laptop a few days ago (March 2008), for £399. Is for me very good report quality / price, but in my opinion it is rented by the above-mentioned design LED fault and a very cheap feeling keyboard, with keys that creak and stick to the opportunity. The built-in speakers are also low-power. I wonder if it is a version produced exclusively for this store at a certain price point and that these questions are unintentionally introduced?

  Thank you

  Rich (a friend of Claire set up the machine for her!)

  Post edited by: ADMIN

  Hello rich

  As a first step, I would like to say that I have the same model of laptop Satellite P200D-111. To be honest, I don't understand why write you about the problems. For me you just wrote on your personal opinion. It is logical that each of us has different opinions and I can understand you. But why all this set as a kind of design flaw. Sorry, but this is really ridiculous. Can you give me 100 different products and if I want to I'll find a design fault on each of them.

  Back to your question: all you can do is disable the SATELLITE led (BIOS settings > advanced > last option) but all the other LEDs placed in the Middle cannot be disabled and the LED intensity can be reduced. You can use tape and cover these LEDs.

  What about keyboard: I really don't have what you would expect. The keyboard is really stable and the buttons feel good. I use it for work and have really no problem at all.
  In the end, you need to know for this money, you have very good laptop. If you need better quality, why you didn t buy laptop for £1000. As you know all laptop manufacturers have models of different laptops. It's your choice.

  More money, better quality. But I still think that this Satellite P200D money is really good for laptop. Do you know that only Satellite/Equium P200 has 6 USB ports? Not bad! What do you think?

  Good luck and enjoy this cute portable!

• Qosmio F50 - LEDs start blinking when I plug it in the socket

  Recently, when I plug in the mains, the LED on my Qosmio F50 start flashing, as well as the led battery... the only way to prevent this is to plug the laptop before starting...

  Can someone explain what this can be?
  I guess that there may be something wrong with the output power of the adapter?

  Hello

  Do you mean that the LED flashes only if the F50 was executed with the power of the battery and then plugged in the area?

  Hmm generally battery LED starts flashing if the battery power is low and must be charged.
  The power led blinks if the output voltage of the AC adapter is abnormal or laptop power outages.

  The other LEDS shouldn't flashing orange t
  But if it comes to a case, then there must be something wrong with electronic power supply or something like that maybe the technician should check

• (Model: D6000 ac750) Only the Power LED comes on after start

  Hello

  When I turn on my router, only the power LED comes on, no other LED lights. Ive been waiting for awhile as well, switching router on and outside, from time to time but its still the same result, only power LED lights

  I think this happened because of the failure of an attempt to upgrade my modem firmware, which I clicked on another tab, stop the download. After that, the modem turned off and only the power LED came on when I switched it back on

  any help would be apperciated, thank you

  NotGTAV

  I would say that the modem can be bricked you wish to contact Netgear phone support if it is still under warranty.

  http://support.NETGEAR.com/general/contact/default.aspx

  DarrenM

• Difficulty with the extra addition of LED

  Hi all

  Hope someone can help me with this. I have some difficulties with the addition of special edition led in the program. There is already a conduit in the program who are burning on a random time between 3 and 7 seconds. Now, I want to add a further directed that burn also occasionally at random, but not at the same time, when the other led also burning. So far, I can only he manages with two burning leds at the same time. The program is a reaction timer, see attachment.

  Thanks in advance!

  The absolute best way I can think to do is to add a second loop and use a notifier to communicate between the two.  When the user press the Start button or the Stop button resets the timer, send a random number for the notifier to the second loop.  In the other loop, wait for the notifier.  Put the value received in a shift register and use it as the value of timeout for the next notification. When it expires, assign the second Boolean value.  Something like the VI attached (I took out the calls to the DLL).

  There are other problems with your VI: there should be a way to leave, and never recover the array of length 0.

• LED constant name does not match between window Panel and attribute popup

  Edit a range of gui (file .uir) in CVI, I double click on a LED and change the name of the constant.  The name in the Panel summary attribute on the right of the IDE indicates the wrong name.  What causes this?  I had copied and pasted the other LEDs before editing their names.  It seems that the copy and paste operation has confused CVI.

  I used CVI 10.0.0.  I called support and the support engineer was able to reproduce the bug on 10.0.0, but not on 10.0.1.  So I upgraded, and the bug disappeared.  I think that the problem occurred in version 10.0.0 when I exceeded 256 LEDs.

• the G7 1113eo lights. Power led flashes 3 times pls help

  Hello, im hoping someone can help me, I have a 1113eo of the g7. that does not start. the battery has been dead for a while, but his works well with just the adapter. But yesterday it no longer starts, I tried to do the hard reset (remove battery and hold the power button for 15/30secs) but who did not work, so I started to disassemble that he virtually stopped when I discovered that I didn't have a screwdriver. then press the button power again just to check, and the pc started. a stroke of luck was good cause I tried to restart and it started again.

  whenever I press the power button, the little led next to the power supply, flashes 3 times. No its or other led´s flashing

  Please help me

  (ps the warranty is no longer valid)

  Hello

  It is certainly not good if you are able to check the adapter - my main concern, as you was able to get the laptop to start only once, is that this may also indicate a possible problem with the power supply Board.

  Kind regards

  DP - K

• Muth LED is not percent after the installation of the driver

  my laptop model is hp pavillion sleekbook 14-b065tx after installing windows 7 64 bit and also after the update drivers that the mute light didn't work. But its function does not work. But other Led indications are very well

  What would be the problem for this

  Hello

  Line mute functionality is provided by the package IDT HD Audio - not already done if you don't have it, try the version at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp57501-58000/sp57966.exe

  After you install the above driver package restart the laptop.

  Kind regards

  DP - K

• Tecra A10 won't boot to the top

  My laptop does not start at the top.
  When I plug in the power supply of the Green LED on the front of the palm rest (on the far left LED) flashes slowly.
  No other led is on at all. By pressing the power on button doesn't produce no effect.

  Please can someone tell what might be the problem with this laptop.

  "Maybe someone knows if the special 'sequence' of the flashing is listed as meaning any lease of particular problem."

  Your kind help in this matter would be appreciated.

  Thank you
  Ian

  Hello
  There must certainly be a hardware malfunction.

  > "Maybe someone knows if the special 'sequence' of the flashing is listed as meaning any lease of particular problem."

  Knowing that you can read the flashing code by using the following procedure:

  Short blinking means 0 and long, 1.
  The code can be something like 0001 0001

  Error code begins with LSB (least significant bit), the error code should therefore be read starting with the last piece. This means that the code: 0001 0001 appears as 1000 1000
  This code you need to turn it into HEX and you will get the error code.

  But in my opinion, even if you want to know what is causing this problem, especially it s any malfunction of the motherboard (maybe also part connected to the motherboard as a RAM module) and it means that the integer part must be replaced.

• Portege R500 - overheating?

  Hello

  Recently one of my colleagues has experienced problems with its Portégé R500 laptop. The display becomes either black with white text (but the image is cut and very blippy) or the screen goes black in general. The laptop is very warm to the touch when this happens and if turned off then turned on the power LED lights, but no other LEDS as HARD drive / wireless as usual.

  However, if during a few hours, it turns on the property. I decided it was overheated and was ready to RAM the machine, but when it came to me rehearsing heat / hardware failure with many stress tests the phone performed very well for hours even with 90-100% charged all the time.

  This problem would anything other than overheating itself? I don't want to RMA a machine without symptoms, but at the same time, it is inappropriate to pass back to her so she can do her job on. I already have a can of compressed air, so this isn't the venitlation / fan is defective.

  Thank you very much.

  Post edited by: oakala

  Hey Buddy,

  Theoretically, it could be an overheating problem, but it could be another problem as well. This should be checked by a technician of the laptop. It is very difficult to say what is defective, so you need professional help.

  It is good that you have already cleaned the fan using a jet of compressed air, but maybe the thermal compound must be renewed. Just ask a service provider authorized if it of necessary and if they can do it for you. :)

• Satellite U400-10N fails to start all by showing a black screen!

  So, I press the power button, the 3 LEDS are fuctional appearing but CPU - GPU fan does not start!

  After a while, it shuts it self and then he tries to start again, but the fan fails again while the power led and not others (Led 1 and 2 down).
  Must say once again that the screen always appear black (maybe also dead)

  I thought it was a problem of overheating, so I cleaned the fan but with not a lot of dust!
  But it was not the problem crearly because I tested it!
  Now I think that this could be a GPU problem, but I don't know about you!

  Any suggestions that he could be and how o solve this problem? Thank you!

  Hello

  It may be RAM problem, it may be a motherboard problem, it can also be a problem of CPU or GPU.
  Any party may be affected.
  So what to do?

  You can see the part as RAM. You could buy new Rams tested and could replace it but what happens if you buy new RAM modules, replace it and laptop will NOT turn on?
  You would spend the money for the new RAM but eventually the other party could be faulty

  So I think that a professional technician must check the unit first.
  Guys could give you an answer as to the defective part and then you could decide what to do
  You know what I mean?

• Power XDVD intermittent satellite 4090 problems

  I just purchase a Toshiba Satellite 4090XDVD and find an intermittent power on the problem.
  Use adapter + battery (partly charged) the first power to the ends in 2 seconds - no Toshiba logo/message on screen, no disk activity after his initial whining for 1-2 seconds. Power on and then turn on again everything happens normally.

  System looks good - no boot errors or messages and the date and time are not correct - so no indication of a problem of cmos.
  Sometimes I have to market twice as much power. After the system powers on normally, it will continue to do so-if I leave for a few hours or a day, the problem reoccur. Using the AC adapter and remove the battery, ignition problem is worse - a 4-5 power downs / restarts before it starts.
  When the problem occurs, the LCD screen is blank - no logo Toshiba etc and I heard 1-2 seconds of activity - shrill drive etc - then nothing.

  The AC and LED right next to her are on.
  No other LEDS are on (unless the battery installed and get orange solid leads) sometimes turn off refuses and I hear 1 long beep followed by 29 short beeps.
  Yet, once it powers up that will continue to power upward normally until I have let rest for a while.

  My documentation shows two batteries on a board inside - cmos and RTC I believe - but I hesitate to dismantle the pc and replace because I see not all the symptoms that they are the problem (no error cmos, no problem of time).

  I know that its an old PC, but I just use it as a second computer for small jobs and it is awesome. Anyone had a similar experience or ideas? Your comments will be appreciated!

  Hello

  In my view humble and honest, this looks like a motherboard problem.
  I think that no one would be able to tell what part on the motherboard could be affected, but what you could do is check RAM.

  In many cases the failure of RAM can cause issues too
  Check the RAM may be worth a try

  So as you can see, a lot of suggestions, but that's all

• Satellite A300-15 was: How does the Toshiba control keys?

  I recently bought a Satellite A300-15A; model: PSAJ4E;

  The laptop has 6 multimedia keys on top.
  As described in the manual, they are supposed to perform the following functions shown (from left to right): (I'm dialing for convinience to talk about later)
  1 mute / power button LED
  2 CD/DVD button
  3. Play/Pause button
  4 Stop button
  5. back button
  6 next button

  Can someone explain all the buttons above.

  The only function these peform for me are as follows;
  1st button only allows the LED turned off/turned on but does not any silent operation with any application (not even Windows Media Player). Even when he performs the operation LED is off; only 6 keys and the bottom screen 'SATELLITE' is disabled; the other LEDS (in DC, Powe. Drums, disks) are always on... What is the problem and how do I start its silent operation so that I can cut the pc with any operation of the application.

  2nd button does that open Windows Media Player. What it is supposed to do exactly?

  All other keys do nothing but work on Windows Media Player. They do not work on any other application; either VLC or any other. How can I make it work on all multimedia applications...

  Please do develop and respond with solutions.

  The last of the woks to buttons ONLY with Windows Media Player! You can't use it with 3rd party like WinAmp player.

  According to the first 2 buttons:
  You can change the functionality assign the right exe file.

  For example:
  If you want to assign the light On / Off instead of Mute, you have to go

  Toshiba Assist-> optimize-> Toshiba Button Support.
  Select Dimmer.exe and click on register and click on 'Browse' button to Toshiba support and go in C:/Program Files/Toshiba/Toshiba button Support (or TBS)

  Now the button will start the dimmer.exe

  Even you can do if you want to use Mute or other applications

• NB100 - how to activate WiFi without Blutooth?

  Hi, I have XP NB100-12Z.

  My problem: how to activate WiFI withouth activation Bluetooth! With the Fn + F1 combination devices are on and turned, as the orange led is on but the manual say Wlan (unique feature) is on the combination Fn + \. With this combination, no other led appears. So is there a way to make independent WiFI and Bt?

  Thank you for your attention.

  Hello

  I m don't know how son NB100, but other laptops you could choose between WLan and BT or BT WLan together.
  Pressing the FN + F1 would allow BT and WLan functionality.

  But what happens if you press the FN + F1 again?
  Would you be able to move to a single option (WLan or BT)?

  If this is not possible and that the FN + F1 key combination would enable and disable WiFi and BT together so I doubt you could use WLan or BT separately.

• Why Satellite 200cds will turn off by itself?

  After 25 minutes to do not touch, weather active or not, it just shuts down and the power led flashes red (all other LEDs are off). He's not coming by pressing the power button then.

  I don't think that there is a power management, because it is so old, but I can't be sure, I have found no manual of Toshiba or Google sites. Can anyone tell what the power blinks red led?

  Hello

  It's a FAIRLY OLD machine so I wonder why you´re always use it. Isn´t a little nostalgic, it? ;)

  Regarding your problem: this 'extinction' appears exactly 25 minutes? It would be useful to know whether the machine really has some powermanagment then you should be able to change settings in the bios.

  If you know how to get to the bios, then it try it. Unfortunately, I Don t know how to get the bios on this machine (perhaps by pressing ESC, DEL or F2... I'm not sure).

  See you soon