P900 + Win8.1Pro + RAID0 HDD Password = stride S3 problem

Similar Questions

• How change/deaktivate/reset HDD - password on Portege M400?

  Hello

  does anyone know how to change or deaktivate KNOWN HDD - password a Portege M400?

  Once again: I know the password, but I get bored typing every start.

  Greetings M400User

  Hello

  As far as I know that something like this is not possible. More info on password HARD disk on Toshiba laptops, you can read under
  http://APS2.toshiba-tro.de/KB0/TSB6B01MC000CR01.htm

• Elitebook850 /Win8.1Pro/Fingerprint not working/install Client Security Mgr - error 1001 HP

  Try to get the print is working on a new Elitebook850 from HP after upgrade to Win8.1Pro.
  During the installation of Archbishop of security customer HP (SP64399), I get an error 1001 and therefore a roll back of the installation.
  If I got a successful this Mgr software installation is necessary to get the job of fingerprinting, I'm stuck.

  Hello Droopy_70,

  Welcome to the HP Forums!

  I understand that you have a problem with your laptop. However, since it is a commercial laptop, you should post your question on the map cell of the HP Enterprise Forumsfor a better answer.

  Thank you and have a great day!

  Mario

• Can satellite A100-999 - I recover the HDD password?

  Hi all

  I had a virus, so I formatted my computer, a Satellite A100-999. After I did, I was going to install Windows Vista, but I never could, because they ask my HDD password and I don't know what password it is that, I don't see it anywhere. My computer has been installed in the store, I only have a bootable disc, they gave me.

  My question is: How can I recover my HDD password? Is it possible? I can boot the system in any other way?

  Thank you!

  Sara

  It of not possible recovery or removes the HARD drive password. An ASP peut t for this too.

  Sorry, but in this case, you need a new HARD drive. There's no other way.

• Satellite Pro 6100 displays a "Built-in HDD Password" message whenever I start

  Hello, my computer displays a "Built-in HDD password" message whenever I start. I never set any password on the hard drive in the past, although in desperation to try to get the laptop running, I tried all possible passwords but there is no answer, I would be grateful for any help or advice. What should I do?

  Well, I put t know what you did on your laptop, but as far as I know it's not possible to remove the HARD drive password.
  In this case, the HARD drive is not usable, and therefore a new HARD disc has to be ordered.

• Inspiron 3650 comes with Win10PRO. What is the procedure to downgrade rights WITHOUT having to purchase a new license of Win8.1pro?

  Hello

  just bought 4 3650's with preinstalled Win10pro inspiron. For enterprise applications, I need to win8.1pro must be installed on the machines. Microsoft (and Dell) claim the right to downgrade grnat to the pro version of Win10 to Win8.1 pro (what I need)

  Is there someone who has the correct procedure to do? I called dell and Microsoft every day without success :-(

  Concerning

  Well, I followed the method of downgrade described by Philip Yip and during the telephone conversation with Microsoft active rep my new installation of Windows 8.1 pro.
  Here's what you need to do:
  1 extract you Windows 10 Pro BIOS key using produkey-64. Write it down.
  2. go to the Microsoft web site to create a true Windows 8.1 Pro installation support: https://www.microsoft.com/en-us/software-download/windows8?wa=wsignin1.0
  3. do a clean install of Windows 8.1 Pro using the generic key mentioned above in the post by Philip Yip
  4. Alick to activate Windows, and then select telephone Activation
  5. call using the number displayed in the activate dialog box
  6. Microsoft representative say that ' you have Windows 10 Pro and you want to run your downgrade rights to Windows 8.1 Pro»
  7. they will ask you your key Windows 10 Pro to make sure it is valid and will confirm that you have the right to downgrade
  8. after that, they could connect to another representative - repeat what you mentioned in step 6
  9. they will ask you installation ID
  10. after that they'll ask you which key you used - tell them generic key
  11. Finally in my case instead of telling me the activation ID - they gave me a new product key for Windows 8.1 Pro who, after entering got my Pro 8.1 active Windows.
  Maybe in your case - they will give you an activation code.

  In any case - it's fully working method.

• message: "frozen HDD password"-are there a way to reset?

  I just got a new laptop and my children tried to turn it on... because it is password protected it now says my HDD password is frozen. Is there a way to reset this? I had this comp. for the whole 2 hours when it happened that I didn't have a chance to make the record... the password will reset on its own?

  If the error message is specifically "hdd password" is frozen, consult the manual of your PC & their support site as it is a utility that it will be paid.

• T61 - HDD password is not editable - HELP

  Hello

  I have two T61 with 2.27 installed latest Bios.

  In one of them is a HDD SSD from Crucial I chose to protect as usual with a

  Drive HARD PW via the Bios. Now, I tried to change the disk to do this, I tried to release the IPL.

  This possible isn´t somehow, I can´t retype or not change either.

  The HD PW option is gray, it says user & Master but I can´t change all the options.

  I also tried typing the PW and then, space, no effect at all.

  No one knows what wrong with this PW or the disk, I tried on the two T61s.

  Hi and welcome to the forum!

  HARD drive password can be changed using special ThinkPad, it has been on.

  Put the drive into the ThinkPad allowing you to set the password on the HARD drive and see the following posts: -.

  http://forums.Lenovo.com/T5/W-series-ThinkPad-laptops/can-t-remove-HDD-password/m-p/322215#M12123

  http://forums.Lenovo.com/T5/T400-T500-and-newer-T-series/ThinkPad-T400-and-HDD-password-OCZ-vertex/t...

  I hope this helps.

• Defective Portege R700M - BIOS & HDD password reset

  Hello

  My Portege R700M stopped working after I hit the top. Service center had rejected citing 'Mother, damaged card', the laptop has been installed for the protection of the BIOS for the HARD drive password.

  Even if the hard drive is intact, I am not able to recover the data through the BIOS password protection. will be able to help me to unlock the password of Toshiba.

  Concerning

  I guess that the motherboard is faulty and will be replaced. I assume that HDD is OK so I think that your original HARD drive will be used again. After the replacement of the motherboard you n t has more need BIOS password. New motherboard will be more determined by BIOS password.

  At least explain the situation and Toshiba technicians will explain to you how it works.

• Tecra M5 requires more EasyGuard HDD password

  Hi all

  I was a complete key and changed some BIOS settings, specific WOL on my laptop. Now, when I try to start I get is more asked for the password (the blue screen with * etc.) but rather a message saying "error loading operating system".

  I've tried everything I can think of, but it seems that EasyGuard a death/disabled the startup HARD disk or has infact wiped.

  I just tried booting from the XP CD to see if the partitions are intact - I can see two with [Unknown] where it should say NTFS... clearly something to do with the encryption of disk HARD/safety...

  Help, please! A quick response would be fantastic!

  Did you change or remove the password of HDD in BIOS?

  Maybe try to reset the BIOS defaults.

• How can I remove the HDD password?

  A does anyone know how to reset the Toshiba 2.5 "SATA or IDE password?

  Or how can I use a password protected HDD?

  From time to time, I can read this question here in the forum and so you can find the answer here already.

  However, a HARD drive password can t be deleted. If you n t know the password for the HARD drive you need to replace the HARD drive and no one can remove this password.

  Sorry, but that's the absolute truth.

• laptop Hp WIN8 2000: enter the password administrator or power on password

  Hello, can someone please help me
  I have Hp 2000 Notebook pc win8, not his to
  Enter the password administrator or power on password: deactivation of the system 67240918

  Help, please...

  I found my answer here http:bios-pw.org/

• 1410: HDD password appears and Windows does not start

  in a 1410 out of the blue sundendly apears a message PASSWORD HARD drive and windows will not start how to solve the problem?

  Hello

  He password disk HARD is not removable without knowing the old password of HDD.
  If you n t know this password for the HARD drive is locked and it s not possible to use it.
  Unfortunately there is no other possibility

• Transfer WIN8.1PRO OS between HHD and SSD

  The WIN8.1 OS is installed on the HARD drive of 3T to my new HP EnvyPhoenix 810 - DT 330qe (m/n J6N61AV #ABA.) I bought a 250 GB Samsung SSD and want to install the operating system and the programs frequently used on it for quick IOPS / s. The RecoveryMedia is on another partition on the HARD drive.

  Hello

  You must

  • clone the existing content of the current HDD to the SSD,
  • Remove the existing HARD drive and install the SSD as drive elementary start (you caddy and support for the SSD because it's smaller),.
  • You can erase the HARD drive and install it as a second HARD drive (if your machine has enough space).

  The main task is cloning. You can use commercial software or free software to clone:

  http://www.techsupportalert.com/best-free-drive-cloning-software.htm

  Kind regards

• WIN8: backup program and password at startup

  I have a brand new model Pavilion Sleekbook 14-b013cl running under 64-bit Windows 8. Two questions:

  (1) Win7 was a program of restoration that could create a disk image with full backup, but Win8 seems to have just a file by file backup system that excludes the files of the OS. A more capable backup program comes on this computer?

  (2) I have configured the computer to not require a password at startup, but it is still asking one. When I start I see a screen with the date and time - I have to click on it and then the machine asks me a password. How can I go directly to the home screen when I start?

  Your welcome,

  I don't think that you must earn 8 Pro to save to an external drive.

  I suggest opening a new thread with this question, which gives a better chance to see and to be able to give more information about the HP Experts.