Transfer WIN8.1PRO OS between HHD and SSD

Similar Questions

• Windows OS 8.1 transfer between HDD and SSD on laptop (built-in two disks)

  Hi, I have an Alienware Laptop, 14, I wanted to transfer/copy/move my current OS (Windows 8.1) of my HDD (1 TB) to my (7.3 GB) SSD. I tried many methods I've seen online in other forums, I restored my computer whenever I between methods, when they fail. Yet, I need to find an effective way to do... I tried the following:

  -Start switched from AHCI RAID
  -Transformed into legacy prioritize boot from a USB device and tried to run AlienRespawn and Windows OS 8.1 (drawn from Microsofts website), twice, on two USB keys separate (both about 15 GB of storage).

  The result of AlienRespawn was simply did a cover of my HARD disk drive and my OS remained where he was, nothing has changed with my SSD. That being said, there is no selection in my START menu to choose which drive I want to start, for that, I guess I have to unplug my HARD drive so that it my laptop self chooses to run by using the SSD.

  The result of the execution of the USB with the operating system of Microsoft 8.1 is it says some sort of error, I googled the error online, he says to reformat the USB key and drop the operating system on it, and then try again. I did that twice, and both times found the same result (same error).

  I also tried to clone my HARD drive of my SSD using EaseUS, who put my documents and files on my SSD, but my BONE was still running on the HARD drive.

  I cloned partitions with Partition Master, with negative results, as well as using Tuxboot and Clonezilla combo to start my laptop using Clonezilla, but at the start he just asked me to remove all USB devices that did not have an operating system on them (I had a USB in)

  I also tried a few different USB sticks (I went out and bought three to try).

  The more recent method, I tried with the help of DiskPart. I executed what she says on many forums/sites, which involved cleaning/selection/activation disk 0 or no matter which drive my SSD was on. But once again, no result no positive.

  I'm desperate, I want to just run my OS on my SSD laptops, is it really so hard, or I'm just using the wrong methods and/or measures hurt?

  If anyone can help with a step by step guide that worked for them, please enlighten me!

  Thank you very much.

  I did a lot of research ahead, and this program kept coming as the way the simpler, cleaner to move the operating system, according to the people about these and other bodies.

• I can't transfer file via airdrop between the macbook pro and my iphone 6.

  Hello world

  just bought a new macbook pro 2015 and I can't transfer file via airdrop between the macbook pro and my iphone 6.

  Can someone please help me solve this problem?

  Thank you

  < re-titled by host >

  First check the steps to run the drop:

  Use AirDrop to send the contents of your Mac - Apple Support

  There are some work around to try airdrop work:

  1. Turn off Bluetooth on your Mac.
  2. Delete /Library/Preferences/com.apple.Bluetooth.plist
  3. Re-turn on Bluetooth

  You can find more info here:

  Transfer and AirDrop does not work in El Capitan

  If you do not see all of your device, it means that you are affected by the same problem, I have known, since the upgrade to OS X the air drop of Captain does not work.

• Data transfer between PC and device

  Hello

  I need an advisor. I was wondering what would be the best way to transfer data from the PC to a connected device?

  Here's the scenario: I need to download a large amount of data from a web service. To do this, I use a small application installed on the user's PC. Once the data is downloaded and converted, the application converts it to an xml file. I would push this file or string with the XML itself to the device that will be connected through the USB port.

  In addition, the scenario reversed: I can access the PC to the device file system?

  Thank you

  Daniel

  Hi Daniel,.

  You just need to synchronize data between PC and device and device to the PC. I'm wrong?

  There are 2 ways to do it.

  (1) Intellisync APIs, (Director of office requires)-net.rim.device.api.synchronization

  (2) USB connection. (Doesn't require no Office Manager)-use streamConnection

  You will get the USBsample in samples of JDE. I guess that as the example of synchronization is in examples of JDE applications.

  Please reply,

• Transfer between Zune and iPod Touch music

  Transfer between Zune and iPod Touch music

  Does anyone know how to get the Zune music on iPod touch?
   
  It is requested before, but that was over 2 years ago.  Maybe there's a new solution?

  Hello

  The question you posted would be better suited to support zune.
  http://answers.Microsoft.com/en-us/Zune/Forum
  http://www.Zune.NET/en-us/support/

• The distribution of applications and data between the disk SSD and HDD

  I recently installed an SSD in my Macbook Pro (late 2011) instead of the DVD player. I want to install OS X on it, by replacing the current OS X on the original hard disk, I will continue to use for storing files. How should I allocate its use in car? OS X and applications on the data files on the hard disk of 500 GB and SSD?

  The first series of instructions will partition and format the newly installed SSD disk then install OS X on it. The second block will help you configure OS X on the SSD with your data on the HARD drive.

  Clean Install of El Capitan on a new disc

  1. Restart the computer. Immediately after the chime, press Command + Option + R until a globe appears.
  2. The Utility Menu appears in 5 to 20 minutes. Be patient.
  3. Select disk utility, then click on the continue button.
  4. When loading disk utility, select the drive (generally, the entry Out-bumpy) in the list aside.
  5. Click the Partition tab in the main window of disk utility. A panel will fall.
  6. Set the GUID partition scheme.
  7. Define the type of Format Mac OS extended (journaled).
  8. Click on the apply button, then click the fact when it is active.
  9. Quit disk utility and re-enter the Utility Menu.
  10. Select reinstall OS X and click on the continue button.

  How to use an SSD with your HARD drive If you want to use an SSD as boot with your existing HARD disk drive, as the disk 'data', here is what you can do. After installing the SSD, you need to partition and format the SSD using disc utility disc. Then install OS X on the SSD. Once installed OSX boot from SSD. Startup disk preferences to set up the SSD as the boot volume. Open the preferences users and groups. Click the lock and authenticate you. Or CTRL - RIGHT click on your username account list in the sidebar and select Advanced Options in the context menu. You will see a field called "Home dir: ' on the far right, you will see an Edit button. Click on it. In the file dialog box, navigate to the location in house now located on the HARD disk (disk HARD/users/user_name /.) Select the folder, click the Open button. Restart the computer, as shown. When the computer starts, it will now use the home located on the HARD drive folder. Another more technical method involving the Terminal and the alias is discussed in depth here: using OS X with a SSD and HDD - Matt Gemmell configuration. It's my preferred approach because I can choose which records of the House, I want to on the HARD drive and I don't want to. For example, I like to keep Documents and library files on the SSD because I frequently access their content. Make sure that you keep the bootable system entirely on your HARD drive where you need it.

• How to transfer pictures from iphone to PC and keep the date, time and place

  How to transfer pictures from iphone to PC and keep the date, time and place

  Hello Grumpelfuerer,

  Thank you for using communities of Apple Support.

  If I understand your message that you want to import your photos from your iPhone 6 s, as well as for your Windows PC. I would like to save my photos on my computer as well. There are two ways to do this. You can use the iCloud photo library allowing to synchronize photos between your devices or import your photos to your PC using Windows Photo Gallery. This article will provide you with the steps that you can use for both options:

  Import photos and videos from your iPhone, iPad or iPod touch

  Best regards

• Satellite R630-155 - fan is too loud and SSD update

  I am the owner of a Toshiba Satellite R630-155 (Core i5-480). My problems are:

  1. the fan is too loud and never stops. In normal operation (navigation and General Office work) there is a constant high pitch noise which is audible three to four meters in a desktop - high load environment, you just can't take it anymore! The fan never stops... even when you do nothing...

  2. the heat is a big problem. The bottom of the laptop is overheated constantly and I have to place on my desk so that the lower left corner is outside the table, so it can breathe fresh air from below - otherwise, the temperature rises and the (noisy) fan is unable to follow. When I work with the laptop sitting on a couch, I place a thick book between the laptop and my legs. The book must be thick (more than one inch) with hard covers, otherwise the heat going through the book!

  3. last (but not least, I will mention the biggest problems here) that's the problem with the installation of the SSD. I bought a used Corsair F80 (80 GB SSD) from a friend, but I was unable to use it with the Toshiba - BIOS not detect the disc. I tried to install all the latest updates for portable and SSDS but I had no success. Then I put the disc and I bought a brand new Zalman 128 GB SSD (SSD0128N1 Sandforce) but I had exactly the same problem. I contacted my local support Toshiba and after much conversation, the only answer I got is that the laptop is not compatible with these SSDS, and it is acceptable by Toshiba and not their problem. They told me that if I need an SSD upgrade I cannot go for the Toshiba SSD that is installed on the portege series, which is sold by Toshiba for a ridiculously expensive price - about $500 for 128 GB. I contacted the European support center and I got the same exact answer. I searched the Internet and found someone else with exactly the same problem with a Corsair 128 GB SSD - he concluded that the laptop detects the SSD after ten to twenty resets. I tried and it was true - after a lot of restarts the detected disk Zalman laptop and I was able to successfully install Windows 7, but the process is unacceptable. Also the drive is rated by the sites official at the speed of an OCZ Vertex 2 128 GB (and a little better), but when I ran a cue point in the Toshiba, the results I got were less than half of the advertised speed. Same reference in another machine of the same disc, resulted in the announced speeds.

  Shame for Toshiba...-beautiful design and portability, but all the rest is a big flaw. Their support in non-existent and they do not appreciate their customers. According to me, they stole my money and I will never buy a Toshiba laptop again.

  Sorry for the big message, but I need, I warn potential customers. Can anyone help me with any of these problems? You also have the same problems?

  To follow...

  Hey Buddy,

  With regard to the issue of fan and the heat: you did it BIOS update? A friend told Satellite R630 too and he told me that the fan with the new BIOS version 2.10 activity is reduced. In addition, the laptop is colder than before so I recommend to install this update. You can download the update of the BIOS here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  But before you start the update of the BIOS, you should consider the following tips:
  -Run update as an administrator only
  -Unzip all files from zip archive before launching the update file
  -Close all running programs as the antivirus and firewall
  -Make sure the battery is fully charged

  With regard to the SSD it s still a little complicated to install 3rd party products and no one can guarantee that these parts would not work. You're always on the side safely with original spare parts from Toshiba.

  All you can do is to install the new firmware for SSDS and hope that it works, but who knows maybe the BIOS update will help you also in this case ;)

• Elitebook850 /Win8.1Pro/Fingerprint not working/install Client Security Mgr - error 1001 HP

  Try to get the print is working on a new Elitebook850 from HP after upgrade to Win8.1Pro.
  During the installation of Archbishop of security customer HP (SP64399), I get an error 1001 and therefore a roll back of the installation.
  If I got a successful this Mgr software installation is necessary to get the job of fingerprinting, I'm stuck.

  Hello Droopy_70,

  Welcome to the HP Forums!

  I understand that you have a problem with your laptop. However, since it is a commercial laptop, you should post your question on the map cell of the HP Enterprise Forumsfor a better answer.

  Thank you and have a great day!

  Mario

• Replacement of HHD with SSD in HP Pavilion TouchSmart Sleekbook14-f027cl

  Is it possible for me to replace the HHD with SSD in my HP Pavilion TouchSmart Sleekbook14-f027cl? And if so, how? For example, I'm looking for (a) a guide to open the computer without damaging it (I found one for Sleekbook 15). Also (b) I would like to know if I have to update the BIOS / other computer settings.

  Finally, (c) are there brands of SSD, I should not do?

  Thank you for your help.

  What has been said here applies to you:

  http://h30434.www3.HP.com/T5/hardware-upgrades-replacements/HP-Pavilion-Sleekbook-upgrading-hard-drive-to-an-solid-state/m-p/3190769#M28503

  Your model is very difficult to upgrade. If you want to move forward in any case post back for assistance.

• Series communication between computer and cRIO

  Hello

  I am not new to Labview or cRIO programming, however, venture in for my first try at the serial communication.  I have a controller (not original NOR) that sends data over a serial RS232 network I want to open a parallel session to the data that I collect with a cRIO.  Before we get to integrate, I try to test with a series, my computer cable and hyperterminal communications and the serial port cRIO.  I followed and validated exploitation and drivers with the following text:

  How to do a loopback Test series
  http://www.NI.com/white-paper/3450/en

  However, when I try to use the following example, I get nothing:

  Transfer data between cRIO and host series
  https://decibel.NI.com/content/docs/doc-3816

  Any ideas on where to start?  I appreciate very much all the advice.

  Thank you.

  I have confirmed that it is a right.  I'll try a null-modem cable.

  Thank you!

• Is there a link between Simulink and Multisim?

  Is it possible to start a design in Simulink and the circuit design and the Board of Directors using Multisim and Ultiboard?

  Does anyone do this?

  Andrew,

  There is no direct translator between Multisim and Simulink tools. A few things would be possible:
  1. If you have designed your control algorithm there is some control blocks in Multisim. The are located under the Sources-> control function blocks. Try to see if you can replicate the Simulink functions in Multisim.
  2. There are several function transfer blocks available in Multisim. There is a good example under the option menu to open samples that will show you the diversity of the blocks available in Multisim transfer function, that can be able to describe the system-level blocks that you implement in Simulink.

  I hope this will give you an advance.

  Kind regards
  N Pat

• DMA between host and target FPGA is not supported for this remote system.

  I try to cover with my FPGA (on the cRIO-9002) of the RTO.  I have install upward of anOpen good VI reference without error, but as soon I try to access thefifo I error-63001 and the attached message wrote:

  Error-63001 occurredat reference FPGA VI opened in the target - multi rate - variables - fileIO_old.vi

  Possible reasons:

  NOR-RIO FPGACommunications framework: (Hex 0xFFFF09E7) DMA from the host to the FPGA targetis not supported for this remote system. Another method for controller of e/s or climatiqueLes associated with the FPGA target.

  What other I/O optionsdo I need to move the data asynchronously to the RTO for the FPGA. I have triedcreating memory, but it seems that I can't write to the memory of the RTOSside.

  We have also a 9012sitting around will using this cRIO rather solve this problem.

  I'm very very greenwhen it comes to LabView, so I apologize if this is an easy question.

  As stated in the readme of the driver NOR-RIO, DMA is not taken in charge from the host to the FPGA on the cRIO-900 x series. The cRIO-901 x supports DMA transfers between host and FPGA and FPGA to host all the cRIO-900 x series controllers only support transfers the FPGA host DMA. As a result, LabVIEW returns an error if you try to transfer using DMA controller for cRIO-900 x.

  The 9012 looks like the ideal solution, you are very lucky to have additional hardware laying around

• Inspiron 3650 comes with Win10PRO. What is the procedure to downgrade rights WITHOUT having to purchase a new license of Win8.1pro?

  Hello

  just bought 4 3650's with preinstalled Win10pro inspiron. For enterprise applications, I need to win8.1pro must be installed on the machines. Microsoft (and Dell) claim the right to downgrade grnat to the pro version of Win10 to Win8.1 pro (what I need)

  Is there someone who has the correct procedure to do? I called dell and Microsoft every day without success :-(

  Concerning

  Well, I followed the method of downgrade described by Philip Yip and during the telephone conversation with Microsoft active rep my new installation of Windows 8.1 pro.
  Here's what you need to do:
  1 extract you Windows 10 Pro BIOS key using produkey-64. Write it down.
  2. go to the Microsoft web site to create a true Windows 8.1 Pro installation support: https://www.microsoft.com/en-us/software-download/windows8?wa=wsignin1.0
  3. do a clean install of Windows 8.1 Pro using the generic key mentioned above in the post by Philip Yip
  4. Alick to activate Windows, and then select telephone Activation
  5. call using the number displayed in the activate dialog box
  6. Microsoft representative say that ' you have Windows 10 Pro and you want to run your downgrade rights to Windows 8.1 Pro»
  7. they will ask you your key Windows 10 Pro to make sure it is valid and will confirm that you have the right to downgrade
  8. after that, they could connect to another representative - repeat what you mentioned in step 6
  9. they will ask you installation ID
  10. after that they'll ask you which key you used - tell them generic key
  11. Finally in my case instead of telling me the activation ID - they gave me a new product key for Windows 8.1 Pro who, after entering got my Pro 8.1 active Windows.
  Maybe in your case - they will give you an activation code.

  In any case - it's fully working method.

• Replace the HHD with SSD as drive system problem...

  I hope someone can help out me!

  I want to improve 320GB HHD to the SSD on my X 230.
  I use mSATA as start the device identified as SATA2 (in BIOS).
  I replaced HHD DSS who is identified as SATA0 in BIOS.
  SSD is defined with the mSATA higher boot priority in the BIOS.

  Before moving to the SSD, I did a system image backup on external USB disk.

  When I start my X 230 with SYSTEM RECOVERY CD, it turns out that mSATA DISK0 and SSD is DISK1 and I can't get the image for the newly installed SSD.

  In fact, I did the same procedure that precedes. When I added mSATA, I followed the same procedure to retrieve the image system mSATA and it worked perfectly!

  What should I do?

  The easiest way to run an mSATA with a 'normal' car (HDD or SSD), the method is to remove the drive you want to boot from. Put the rest drive, restart, then the other disk (of data).