Pace auto training, Core 3 incorrect exercise

Similar Questions

• Hyphens in the auto-detecte URL are incorrect

  Hello

  I am converting a word (office 2007) document that contains text similar to:

  http://www.AAA-BBB-CCC.com

  When the document is converted to pdf (tried both standard acrobat 6 and 8.1) and read in the drive (tried 8 and 9) the box pop up when I hover on it seems correct, but when I click it, it tries to go to:

  http://www.AAA%E2%80%90bbb%E2%80%90.com

  Any ideas why this is?

  Thank you!

  M

  Using the document document3.doc I found this:

  The links created with "Convert to Adobe PDF" are correct.

  Print to Adobe PDF format creates bad links. The reason is the Calibri font. When I change the Arial font and create the PDF document with the print in the format Adobe PDF, the links are correct.

• Receives is not the user name or of any email for Mozilla/Firefox

  Tried to login to my account using the last Auto-Fill pass.
  Incorrect password.
  Check out my spreadsheet to check, password is correct.
  Requested assistance from the page, sign in.
  No mail has arrived.
  Requested the recall of the user name.
  No mail has arrived.

  Why?

  In ADDITION, since the download and installation of Mozilla/Firefox, many of my files now have exclamation points (!) next to them.

  Why?

  Bleeding heart, please check on this: http://blog.lastpass.com/2014/04/lastpass-now-checks-if-your-sites-ar... and http://blog.lastpass.com/2014/04/lastpass-now-checks-if-your-sites-ar...

  If you have any questions please come back.

• Watch NumericTextBoxDouble - 0 instead of 0

  There is something odd happens: I put NumericTextBoxDouble in the form, set its value to 0, and it shows - 0. Of course, it should be 0.

  Measurement Studio 2013 / VS 2010/2013

  It is a known issue with an update made to a Measurement Studio dependency that has been shipped in a recent driver release. This has been fixed in their own country and should be available soon.

  Until this fix is available as a solution, you can use a custom value trainer to wrap the existing trainer and correct incorrect negative zero display:

  numericTextBox.ValueFormatter = new NegativeZeroCorrection( );

  ...

  public sealed class NegativeZeroCorrection : ValueFormatter {
        private readonly ValueFormatter _inner;

  public NegativeZeroCorrection( ValueFormatter inner = null ) {
            _inner = inner ?? new GeneralValueFormatter();
        }

  protected override string FormatCore( TData value, ValuePresenterArgs args ) {
            string result = _inner.Format( value, args );
            if( result == "-0" )
                result = "0";
            return result;
        }

  public override TData Parse( string value, ValuePresenterArgs args ) {
            return _inner.Parse( value, args );
        }

  public override bool TryParse( string value, ValuePresenterArgs args, out TData parsedValue ) {
            return _inner.TryParse( value, args, out parsedValue );
        }

  protected override Freezable CreateInstanceCore( ) {
            return new NegativeZeroCorrection( );
        }
    }

• How to define a macro in labview

  Can you please tell me.

  How to create macros in the labview.

  As mentioned below

  #define sqrt (x) (x * x)

  LabVIEW has no macros, but this is a programming language that can do almost anything.  Please after a few g Trainin LabVIEWor the Skills Guide for beginners.

  Edit: I also found this individual to the pace of training.

• DC 4276 bias introduced by Labview

  I work with the meter of LCZ 4276, and I downloaded and installed the driver for it. However, I opened the example VI and it seems to work except it puts an error 'ERROR 1300' in Labview and on the instrument really it shows "ER 13".
  I talked to my colleagues about it and it seems that there are some hypotheses of labview over the instrument. In the manual of 4276a (Section III, 3-14) (page 56 in pdf format), it is said that this error occurs if internal polarization DC voltage has been set via the HP IP but the instrument is not equipped with Option 1 (which is a DC Supply), or it occurs if the comparer enable code (E1) was sent through the HP - IB , but the instrument is not equipped with option 2 (which is a comparator/Manager interface).

  Well, this 4276a does not have the option. The switch on the instrument that turns DC polarization is off. However, as you can see from the picture showing my error, it is a DC bias in the VI himself.

  So I ask myself, how I would you turn off the DC bias or LabView to stop running? I looked through the subVIs that make up this example.VI, and there is no code which entered the channel 'E1' for the activation code, so I don't think that the error occurs due to Option 2.
  I have added the block diagram for the example.VI. In addition, I added the Subvi (ConfigTestSignal.VI) that contains the DC Bias input.

  I would like to know what you think. Thank you!

  

  

  

  Hello Erny123,

  I have not read the manual, but I guess that BI is a string that specifies a configuration of bias, and indicates the end of the command.  "%.1f" is a format specifier that inserts a value decimal floating point with a figure of precision (see this link for the syntax requirements when you use the Format function). Right at the top you can see that a similar format function is used to insert the test frequency in the chain of command using EN rather than BI and a slightly different digital format.

  The example you are using was not written using the standard style of LabVIEW, it can be a little difficult to follow the entries and exits to go where.  Try to click the icon own schema in the block diagram of example to rearrange things in a more logical way of left to right.

  That makes this VI composed a string of commands to send to the device - you need to consult the manual to see what are the requirements of presentation, but I guess you can just delete the second format value function and wire the output of the first through sending message VI.

  I wouldn't say you have to start from scratch every time, but yes, you will need to make some changes in this example so that it can work for you.  I highly recommend that you go through one or more of the LabVIEW tutorials available online, it will save you a lot of time in the long run.

  If you have an active support contract and your serial number of the software has been activated on your account of ni.com, you should have access to the basis of LabVIEW training online here:

  OR Online Self-pace free-training

  https://lumen.NI.com/nicif/us/LMS_LOGIN/content.XHTML?du=http%3A%2f%2Fsine.NI.com%3A80%2Fmyni%2Fself...

  If you do not have access to that, there are a number of other Introduction to LabVIEW tutorials available on ni.com links on the right side of this page are a very good starting point for online tutorials:

  LabVIEW academic training: how to learn NI LabVIEW

  http://www.NI.com/academic/labview_training/

  Kind regards

• execution timing

  Hello

  I'm going to build a real-time application and I want to work for a few minutes, an automatically. Anyone have any idea how to do?

  Thank you

  Concerning

  Hi Gharbi,

  You can add some logic so that the elapsed time VI is reset during the first iteration of the inner loop. If you're not keen on the first time VI to keep account while running the inner loop then you may need to add a similar logic.

  

  Because looks like you're new to LabVIEW, I recommend going through LabVIEW training course. They range from self free to the pace of training instructor.

• 22/07/13 - caveat, 'ZIRCON SYSTEMS, TECH SUPPORT FOR WINDOWS' CROOK, USING THE PLOY of id # 888DCA60-FC0A-11CF-8F0F-00C04FD7D062

  Last week, and now on the longest phone conversation with me this morning, Mon, 22/07/13, phone swindler wants to CHECK the ID NUMBER OF YOUR COMPUTER.  A 3rd call repeat 'husband' today, from "Steve Matthew," of "Zircon systems", where the staff is all "Microsoft Certified technicians".  Said our PC has been disconnected from the server "universal routing" and needed to check the identification number.  Said computer infected and disengaged, errors with malicious files.  That 50% of Microsoft applications does not.  Finally, after several questions polite but stupid me, as if to say but our computer works OK?  the appellant was told that he is temporarily hung up a temporary server! but it must be reconnected...  After having his name and telephone number - strongly Indian accented man "Steve Matthew" on the phone # 408-498-3608, and have patiently give me the 888DCA60 etc etc 32 numbers, he indicated that he understood my being suspicious, but it is a Microsoft Certified tech, calling for Windows, have we not Windows 7 or XP or Windows 8, etc.?    And he said I could not find the computer ID number easily, it wasn't on our guaranteed purchase paperwork, etc, that I would need to go online with him, to find our location.

  Knowing that registrations for computers, go directly to the manufacturer only if you send the information on your purchase, and that no known iin manufacturer sends the modern world 'Oops, you're disconnected' phone calls, it seemed a bit of fun to keep to provide information...

  So I explained to Mr. Steve, when he repeated for the 4th time that it has been certified Microsoft Tech and trustworthy and kept warning me that our computer would break soon, that, by analogy, certified Subaru Techncians had simply taken a few classes to automotive Subaru training and were not necessarily qualified or guaranteed to work on my car the certification does not matter, you should still consult your dealer, the garage, make sure it's good reputation.    Then, I asked him directly, so, on a phone call from me, a total unknown, he would be willing to send me or transfer to me $2 000,00.  He actually misses, in dismay.  So I repeated it-$ 2,000, say, in US dollars, would it send it to me, if I had called and told him his bank account had been disconnected from his bank, and I needed to reconnect it?   He ate and asked me ' you mean $2,000! $? ' so I said yes, would he give me or transfer to me on this amount, based on a phone call?  He said absolutely not.  End of quote.   I told him how we would check with some type IT geek friends we know, took his phone, name and said I would be back to him and please DON'T NOT CALL BACK IN AN HOUR, BUT PUT us WE HIS DO NOT CALL LIST.

  At this point, I googled Zircon systems - and there is no such American society less than a jeweler or invest co. in Illinois), although I had a systems Zicom in India, which seems to be the sale of legitimate & electronic security systems and then I googled the identification number, find some great ads about what happen and asks what will be PayPal scam, if one agrees with the appellant and goes online and follow their directions.

  (See mutation 2012 of a David Jacoby to http://www.securelist.com/en/blog/208193750/ , who described a telephone scam quite similar, with the technical information, copy requested screens, orders).   Maybe giving a technical support genuine or scam to support people on your side, an idea of what was going on my caller to walk me through, if I had fallen for the Universal Server disconnected claim it does?

  Hope this helps to update your information, files.

  In any case, this is my first time ever having reported a telephone scam.  Thought it would do, seems since then I received a call from update and more sophisticated scam.  My husband simply hung up on the caller last week - he knows little re our PC, I ask more tech-savvy people to help if necessary.  But then, the scammer called back, too.  If something had to be done to put an end to the process?

  Don't forget, if you get that kind of call, simply ask the crook to trust YOU, say that you are a certified technician to bankruptcy with years of training from the IRS.  Ask if he is personally prepared to transfer $2 000,00 to you (via Paypal, do not give your bank account to him for any potential future direct deposit!), but preferably by cheque of... And it must be sent to the address of your worst enemy in life, as you need the alimony to a former spouse.  Or to a mailbox in a different city than your...  And then tell him you'll telephone him with the identification number of your computer, once you have verified that the money is in hand.

  Done politely, in a pleasant soft voice, you would be surprised how unprepared the scammer or snow must be befriended as a simple employee, but itself for you send funds then asked?  I'm looking seriously for the money from them here - I'm not asking in fact send me $2,000, but I said that I was trying to explain by analogy, with auto - trained technicians and requests for money, why I wanted to check with the best-known people before giving identification numbers.  Analogies, it seems well understand what we hear - an example?  I just him speechless when I wanted a large amount of course him sent me instead...

  Uh, Mr. Steve Matthew, Zircon systems, technical support for Windows company, also clearly didn't "want to send me a few thousand, and he hung up, after I suggested that he does not call again, asked him to put us on the list of subscribers do not call...   Clearly a new variant, although, in the wick on the Microsoft Certified Tech claims, the name of Zircon systems company and so I thought after that.

  Hello

  I had a similar call from Indian women (?) strongly accented called 'Janet' of 'Zedconnsystems', based in Floria, USA. She had called asking to speak with my roommate to tell her at the computer (which is mine) showed the error messages.  She shook off the usual garbage and was unable to answer most of the questions I asked, but gave his phone number as 4084983608.

  As far as scams go this one seems rather transparent, but mention on the off chance someone saves a load of hassle!

• High EC of Reed-Solomon on 887VA with VDSL

  Hello

  I recently implemented a C887VA-W-E-K9 router to connect to Vodafone fiber 80/20.  This is my first time setting a circuit xDSL from scratch on these routers, so I don't know if the config is 100% good - but it works anyway (much to my delight).

  After a break-in period initial of unexplained CRC errors & header and chronically low download speeds (~ 6 Mbps download, download 19Mbps) the line seems to have "settled".

  Despite said we would most likely be able to move because of our remoteness of cabinet 50Mbps, the router reports as possible synchronization regularly on 73Mbps and speeds in the 1980s.

  Although nobody complained of any problems in the Office I know, I see the values of Reed-Solomon EC persistently high in the statistics for the VDSL controller.  The fact that the rest numbers are zero makes me think that it should not be as important?

  Here is the result of sh controller vdsl 0, took about 30 minutes after I deleted the counters on it:

  VDSL controller 0 is in PLACE

  Status of demon: upward

  UERX-C UERX-R (DS) (US)
  Chip Vendor ID: 'BDCM""IFTN.
  Chip Vendor Specific: 0 x 0000 0xB203
  Chip dealer: 0xB500 0xB500
  Modem provider ID: 'ECOC' ' '
  Provider-specific modem: 0 x 4602 0x0000
  Dealer of modem: 0xB500 0x0000
  Close serial number: FCZ17 * C887VA-W (3) 15.3 M3
  This serial number: 55023 *.
  Close modem version: 15.3 (3) M3
  Modem Version until now: 0xb203

  Modem status: TC Sync (Showtime!)
  DSL Config Mode: AUTO
  Trained mode: profile G.993.2 (VDSL2) 17A
  TC mode: PTM
  Automatic test result: 0x00
  DELT setting: disabled
  State DELT: works not
  Lattice: ONE ON
  SRA: Disabled disabled
  County SRA: 0 0
  Bit swap: activated activated
  Little County swap: 0 0
  The line attenuation: dB 0.0 0.0 dB
  Attenuation of the signal: dB 0.0 0.0 dB
  Noise margin: 6.3 9.8 dB dB
  Best rate: 86392 Kbps Kbps 28273
  Real power: 12.7 dBm 4.5 dBm
  By the quality of the Strip: D1 D2 D3 U0 U1 U2 U3
  Line Attenuation (dB): 10.9 25.7 39.9 20.4 0.6 31.5 n/a
  The signal attenuation (dB): 10.9 25.7 39.9 0.6 20.2 31.4 s/o
  Noise Margin (dB): 6.3 6.3 6.3 10.2 10.0 9.6 s/o
  Total FECC: 107824 69
  Total ARE: 1 3
  Total ITS: 0 0
  Total LOSS: 0 0
  Total Paramedics: 0 0
  Total permanent residents: 0 0
  Total FLY: 0 0
  Total LOLS: 0 0

  Full inits: 1
  Failure full inits: 0
  Short inits: 0
  Failed short inits: 0

  Name of the Source file for the firmware (version)
  --------    ------        -------------------
  VDSL integrated VDSL_LINUX_DEV_01212008 (1)

  Modem FW version: 130205_1433 - 4.02 l. 03.A2pv6C035j.d23j
  Modem PHY Version: A2pv6C035j.d23j
  The provider version: Ap6v35j.23j 68

  Channel 1 channel 1 US canal0 US canal0 DS DS
  Speed (Kbps): 0 73775 0 20000
  SRA previous speed: 0 0 0 0
  Previous speed: 0 0 0 0
  Reed-Solomon EC: 0 107824 0 69
  CRC Errors:              0               1             0               3
  Header errors: 0 0 0 0
  Interleave (ms): 8.00 0.00 0.00 0.00
  Real INP: 3.00 0.00 0.00 0.00

  Training log: order
  The training log file name: flash: vdsllog.bin

  As you can see - the County of Reed-Solomon EC is already in 107 824 and he operates a rise into the millions.  It doesn't seem to be constantly special to him.

  I've been in contact with our broadband providers who do not really able to help and insist that if we use the BT Openreach modem before our router is not a supported configuration.  Vodafone are also telling them the same thing when she was refitted.  I have also been told - I don't think - that the 887VA cannot support VDSL of 80/20, but the CPU on it barely exceeds 15%, even with the CBAC and active IPSEC, it seems pretty meaty.

  Vodafone also gave me a load of settings which don't (I think?) apply to VDSL-e.g. VCI, VPI and VC-Mux/VC-based multiplexing?  I see no way to put these on the Dialer0 interface, and the ATM0 interface is administratively down as he used it.

  Anyone can shed some light on this?

  Is our "noise margin" too low?  A MTU mismatch cause this kind of problem? (currently I have no explicitly set MTU settings, and sh int shows like 1500 - which Vodafone said also we should aim).

  I want to emphasize speed wise I ran speed trials consistently show download speeds ~ 70Mbps and download of ~ 18Mbps and there is no desync I've seen - so just what is causing these numbers of Reed-Solomon EC does not have a negative impact on the line or the quality of the service.

  Hello

  In response to user889988, it's a very good point, suggesting an upgrade to the modem FW as Cisco has worked with BT to produce a specific code for UK trade.

  The fix is well documented and you can search;

  automatic operation mode

  internal service

  Modem ukfeature

  Flash the firmware file name: [name]

  BUT in this case, it is not necessary, 887VA have been shipping for a while (approx.<12mths), with="" later="" firmware="">

  The index is the file name

  ... 35J.d23j

  Earlier patched versions were 35 nd d. where are replaced by the foregoing.

  It might be worth you checking the other orders above well (except the name of the firmware a file).

  n.b.: operation automatic mode by default and does not show in the running configuration,

  (HS control vdsl 0 contains "DSL Config Mode: AUTO ' well)

  and "modem ukfeature" - you can see in the output of

  'show controller vdsl 0 console [number]' after the trains of modem DSL;

  you see something like: -.

  Force UKFeatureBit SET

  There was once a link to the doc to the following, but I think it's a dead link now.

  www.cisco-bt-portal.com/iusr/DSL/Product_Bulletin_DSL.pdf

• Flex in a week - available in printed form?

  Is the Flex in a week available in print material?

  Hello

  I don't know if it's exactly what you need, however, both the video transcripts and exercises are available for download:

  • Video transcript is available in PDF format in the project file THAT ZIP downloads for each day of the Flex in a week of training.
  • The exercises are in HTML and are related to the main Flex in a week page. Here's an exercise: http://www.adobe.com/devnet/flex/videotraining/exercises/ex1_01.html

  You can print these stars, if you wish. I hope this helps you!

  Thank you

  Craig

• STR DN840 does not connect to Internet

  Here are some details on my last posting:

  I noticed that my DN840 STR had stopped download Internet Radio on SEN and that he was not to connect to the Sony Remote App. Also, the unit was no longer appear on the network card in my computer.  I studied the internet settings on the unit and I saw that on 'auto', he displayed an incorrect IP address. I entered the corrected address, etc., under custom settings and it will charge far and finally said that the Internet connection is not. However, for a brief moment, the name of the device jumps in and out on the network card in my computer. At this point, it will charge just far trying to connect to the Internet, and I can't in network settings.

  I reset the unit and reset my router. My XBR shares the same switch the Str and connects very well. I can't understand what is happening.

  rk75 wrote:

  Here are some details on my last posting:

  I noticed that my DN840 STR had stopped download Internet Radio on SEN and that he was not to connect to the Sony Remote App. Also, the unit was no longer appear on the network card in my computer.  I studied the internet settings on the unit and I saw that on 'auto', he displayed an incorrect IP address. I entered the corrected address, etc., under custom settings and it will charge far and finally said that the Internet connection is not. However, for a brief moment, the name of the device jumps in and out on the network card in my computer. At this point, it will charge just far trying to connect to the Internet, and I can't in network settings.

  I reset the unit and reset my router. My XBR shares the same switch the Str and connects very well. I can't understand what is happening.

  It turns out that the problem was that the switch between the Ethernet between the TV and the receiver was bricked. I have reset it and everything is fine.

• Newbie question - Core 1 exercise 7-1

  Hi all

  I started to learn the LabVIEW and I'm taken Core 1 online training. So far, everything is going well, but today I encountered a problem and I can't find a solution.

  The question concerning the year 7-1, figure 7-4.

  I open the block diagram and added most of the necessary elements. That's what I have at the moment:

  

  The problems are:

  1. when I develop "Unbundle by name" there is no element of 'units '. When I try to add a new item, only the multiplication of 'Température' is displayed.

  2. How can I add a specific cluster? I want to add ' weather data in "on the left, how can I specify which cluster I want to use?

  3. something is wrong with the weather data on cluster (the information is 'this thread connects more than a data source').

  Is it my fault, and I'm doing something wrong or something wrong with these example files?

  I would appreciate your help!

  First of all - excuses - sometimes I jump when writing the answers and I forgot the end of this sentence. The type of the cluster in the bundle name is specified by wire cluster going in the bundle to node name. If you turn on context-sensitive help by pressing Ctrl + H, you can hover over the cluster and it will show the items in this cluster. You will get errors if you try to connect two clusters that do not match. As said crossrulz - you will soon learn about type definitions that will help solve this problem, you can update the cluster in one place and the changes will be propagated everywhere wherever you use this type-def would cluster.

  You can download your VI? (preference for LV2014 or an earlier version)

  Looks like you have wired temperature (an orange wire DBL) to a cluster entry (which will be a pink thread!). The upper right connection of temperature VI that I think is the cluster wire you want.

  Here is an example of how you can update the values in a cluster:

  

• FPGA 2012 training: exercise fails '4-Wire Protocol' 7-2: not supported in single-cycle Timed loop

  I work through the training courses OR 2012-FPGA with Labview 2014 SP1. I find the solution provided to exercise 7-2 called '4 son Protocol.lvproj' does not work.  He is unable to run with the message "LabVIEW FPGA has reported the following error: item (s) not supported in single-cycle timed loop.»

  Should it? I thought that the examples in the solutions folder were supposed to work such as provided. What needs to be fixed for this work?  Thanks for any help.

  Hello jbeale1,

  It is a known problem. Here is the comment of NEITHER:

  ---------------

  Exercise no. 7-2: 4 - Wire Protocol [Allen Hsu 2013.8.19]

  • Description of the problem: exercise 7-2 uses a sine wave generator inside a SCTL VI. In 2012, LV, this VI is not supported in the SCTL, but LV 2012 will allow you to use mode 'simulation' (run on the dev machine). However, LabVIEW 2013 not even lets you use this VI in "simulation" mode If you run the VI with the sinusoidal generator inside a SCTL VI, LabVIEW 2013 gives you a "or objects not supported in single-cycle timed loop.
  • Solution: If the students use LabVIEW 2013, you must tell the students to replace the sinusoidal generator inside the SCTL pre-built exercise VI VI with a Square Wave generator VI with the option "inside the SCTL" enabled in its configuration window, as shown below:
    --------------

  To replace the "sine wave generator" right-click on it and select the 'Square Wave Generator'. Then you have to double click on the "Square Wave Generator" and select "inside the only cycle timed Loop". You should then be able to run the example.

  

  

• the exercise training

  Hello

  I have corrected exercises training on Labview (free).

  Thank you

  Hello

  Here is the link http://forums.ni.com/ni/board?board.id=4170 to the French forum, you will be more likely to get an answer.

  CDT

• How to remove incorrect e-mail address in fill-in Auto?

  original title: Auto Fill-in?

  I have an incorrect spelling of my e-mail address, it appears whenever I type 1 number, how can I delete?

  If you mean in a web form, try typing the 1st letter then hovvering on the wrong address it to hightlight (do not click) and then click delete on your keyboard.