Ecosys Kyocera FS - 2000 d Win7 driver fails

Similar Questions

• 2000 - 2dlawm: hard drive optimized dts check failed

  My laptop has not worked for a month and there is no that get to the hp logo screen. I ran a thorough test of the system and the short dts disc hard check had a software error and dts check optimized hard drive has failed, with the failure of M09XWW-6T77QV-MFGJWK ID - 61 QT 03. I don't know if this means the entire hard drive failed and I need to replace it or I need to run more tests.

  Hi @Lman1,

  Welcome to the HP Forums!

  It's a place dynamite to find answers and suggestions!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums.

  Learn how to post and more

  How can I find my model number or product number?

  I understand that when you start your laptop it goes only to the HP logo and crashes.  You ran disk hard both large and short tests that came back with a software error and the optimization of hard drive tests failed with the error code...

  It is an indication that the drive is defective and must be replaced.

  Here is a link to HP Notebook PC - computer won't start (Windows 8) that can help.   The paper suggests that maybe help clean the vents in Notepad.  If after doing this, it starts normally I back up your data and then rerun the tests.

  Are you able to get the HP logo you can try to start in safe mode to save your data to avoid loss.

  HP computers - Windows Safe Mode (Windows, 10, 8)

  Please contact HP support for service options.

  Contact HP to Contact HP Support assistance

  If your laptop is not under warranty, you can also try a repairman or auto repair.  If you can access the Recovery Manager and you have not created a recovery media, I would now.

  HP computers - performing a recovery of HP (Windows 8) system

  HP computers - create a recovery Image on disc or save a recovery Image on a USB drive (Windows 8)

  If you consider to do the repair yourself that I provided HP 2000 Notebook PC Compaq Presario CQ58 Notebook PC Maintenance and Service of Guide.    Chapter 3 page 21 has a list of recommended replacement drivers and Chapter 4 page 47 a removal and replacement procedures to help you make a decision.

  If you don't have a recovery media and are unable to create, you will have to contact HP support to obtain a recovery kit.

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as you. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community!

  To show recognition for my efforts please click the Thumbs Up below.

• HP ENVY spectrum XT Ultrabook: Drive failed in the short DST test

  My laptop HP ENVY spectrum XT Ultrabook fails to load Windows. I ran diagnostics and got an error. Said HP diagnostic tools drive failed the short DST test with id RPLEX3-67T7HU-XD7X1F-60SL03 of the failure. Does this mean I need to replace my hard drive? Product ID of my laptop is B5P12LA #ABM and I have Win7-64 installed on it.

  Thank you

  Alexis.

  Here is the Manual:

  Manual

  Your laptop uses only SSDS. Page 35.

  Yes that means you have to replace the disk.

  Post back with any questions

• Portege M200 - the hard drive failed

  My 60 GB Toshiba hard drive failed in my Portege M200.

  I tried mounting a hard drive, I had in my old laptop, a 30 GB Hitachi hard drive but the laptop doesn't seem to recognize it. Does need a Toshiba hard drive or is the laptop died, when I put the hard drive in I get message invalid startup disk.

  The old hard drive goes to a blue screen then restart the laptop.

  No there not Toshiba HDD only. I found the list of some compatible hard drives for this old Portege.
  You can use follow hard drives:
  -TOSHIBA HDD2193B
  -TOSHIBA HDD2171B
  -TOSHIBA HDD2184B
  -TOSHIBA HDD2194B
  -HITACHI G8BC00014410
  -HITACHI G8BC00014610
  -HITACHI G8BC00015610
  -HITACHI G8BC00014810

  Anyway, when you try to use new BIOS to check updated HARD drive and if default settings the new HARD drive will be recognized correctly in the BIOS settings.

  Old HARD drive is recognized correctly in the BIOS settings?
  Have you tried to install the OS by using old HDD?

• Hard drive failed and I lost my product key?

  Hi guys,.
  
  So my friends hard drive failed and unfortunetly he lost everything.
  
  I replaced the broken hard drive for him and reinstalled Windows 10. However when I went to check if the OS has been activated, it showed as not been activated? I thought the machines after that Windows 8 had their licance saved in the BIOS, so we do not have this problem?
  
  Also there is no sticker on the back or under the battery that contains the product key for Windows.
  
  I also talked to Microsoft, but they were uable to help.
  
  Any help is appreciated!
  
  Thank you.

  KiddG wrote:
  

  It's a HP Pavilion 15-p264na. It came with Windows preinstalled as an OEM licance Home 8.1. It was then upgraded to Windows 10 at a later date using the free update successfully.

  Then the second option mentioned above. Didn't it actually triggered successfully after 10 win upgraded?

  If so, you should be able to activate just fine without problems, IF you use the same edition of Windows. You write it housed 8.1 - you now install Win 10 Home? You mentioned 10 Pro down...

  So I guess I'll with your third option and using the recovery media?
  
  I have 2 HP drives here for Windows 10 Pro for two different HP devices. I think these are the recovery CD, it says that they cotain the client software, if that is correct? Can I use these discs Pro on a BONE at home? Or that I'd be better by following the links you provided?

  Laughing out loud. I'm sorry. I am afraid that you cannot mix just DVD / CD / etc - they are for a specific model for the specific version of Win / edition. You cannot use a recovery media for HP computer to another - it will simply not work 99% of the time. You cannot mix editions of Windows (the House is for Home, Pro goes to Pro).  You want the recovery media for this unit, you need to follow the links.

  However, IF you have enabled the upgrade of Windows 10 post fine, you can simply download Win 10 ISO from here:

  > > https://www.microsoft.com/en-us/software-download/windows10/

  Download the tool, it will download an ISO and burn it to a DVD or write on a USB key. Follow the on-screen instructions, skip entered the key and move on. After installation, Windows 10 HOME should activate fine using digital entitlement if 8.1 Home Win allowed initially.

  I would like to know how this goes for you.

• Satellite A500 - display driver failed

  Hello

  Recently, my three year old Toshiba A500 (0400E PSAM3A) has started to display the message "Display Driver failed" and the screen became all BEHLULI and weird. I'm sure it's the graphics card, open the computer self and he cleaned it with an air compressor that makes it better for one day, but then he returned to normal. I also formatted which did not help.

  I just want a second opinion as to whether it IS in fact the graphics card (not drivers), and if replacement of the graphics card would be a possibility? I had a quick glance when I was cleaning up the outside, and the map is not soldered to the motherboard.

  Any advice would be great,
  Thanks in advance!

  Did you notice this problem when you start Notepad in safe mode too?
  Have you also tried to reinstall the recovery image and test the feature with the factory settings? Is - this result is the same?

  General replacement of the GPU is not supported, and because of the design of specific laptops (cooling system) GPU shouldn't be improved.
  Replacement? Can you do this alone eventually?

• 23 - k027c: ERROR: no boot disk was detected or drive failed

  Hello!

  My computer

  HP Envy tilt 23-k027c TouchSmart all-in-One desktop PC (energy star)

  These latest OS Windows 10 (update of Windows 8, which was preinstalled on the computer at the time of the purchase in December 2013)

  Intel (r) Core (TM) 15-457OT CPU @ 2.90 GHz

  Processor speed 2900 MHz

  A few days ago it started showing blue screens of death with a PAGE_FAULT_in_NONPAGED_AREA note all other hours, or sometimes 3 times per hour.

  I went through all the troubleshooting process, finished with a bluescreen debugging possible analysis demonstrating that the ntoscrnl.exe driver might cause the blue screen issue.  And on the morning of the next day my computer greated me with a black screen with an ERROR: no boot disk was detected or drive failed.

  I can still get into the BIOS by pressing ESC at the present time of HP sign appear early attempts to restart.

  BIOS indicates that the hard disk is detected (yay!), so it is not the source of the problem.

  Memory and disk test went well passed, PASSED tests successfully.

  Pushing ' restore the original and exit "in the bios does not help.

  Nothing else works. Only these two ESC and F10 keys.

  How can I fix the system?

  I don't have a HP with PC Restore disc when I bought it. Site Web of HP didn't kits of restoration for the moment.

  What to do?

  SOS help, please!

  It is the computer that I use for work and personal use. There are gigabytes of photos of my family, as well, who desperately, I don't want to lose...

  I'll be super thankful for all reasonable advice and direct instructions!

  The ' ERROR: no boot disk was detected or drive failed. "  May be a simple solution to redo the botmanager file.  This normally requires a bootable DVD with the repair function or a USD bootable with windows and repair function.  Windows 10 is installed, this would be my choice getting either the drive or the USB key.  HERE IS THE MEDIA tool of M$.  Make the work of another PC, DVD or USB and then - on PC - start problem that media and choose repair when loading of the POPup screen.  DO NOT install.  If you install it, it will eliminate your data.

  BTW: 10 Windows is installed, the HP recovery disk will return the PC to Windows 8.

• Qosmio X 770-BSODS and Crash Dump driver failed to load

  Hello

  I have a Qosmio X 770 and his blue screening occasioanly but I can't find out why as the crash dump driver fails to load at startup.

  I gave google and tried to recreate the page, Delete file, it restart, rebuild again, affecting also devote dumpfile in the registry and still at every start I receive event ID 45

  The system could not sucessfully load the crash dump driver.

  I ran SFC and all files are very well

  Windows 7 64 bit, core operating system

  someone at - it ideas?

  Thank you

  Found a user who had the same problem with the dump file, and this could be solved by deleting the swap file, and then restore and after that seems to have solved the problem...

• After the installation of El Capitan (Canon 4400F) scanner my driver fails

  After the installation of El Capitan (Canon 4400F) scanner my driver fails. Now it's a 6 lb paper weight. Tried to reinstall the Canon software and downlading new from Canon, but nothing.

  First contact Canon for a possible upgrade.

  Then try to use the printers and Scanners pane in the system preferences application to see if it will recognize your scanner. Many current scanners is recognized and you can scan with the application overview.

  If none of these help to look into Hamrick VueScan software. I use Vuewscan with my is further supported the scanner Nikon 4000ED.

  http://www.Hamrick.com

• Qosmio G10-100: HARD drive failed - what size of HARD drive I need to purchase?

  My hard drive failed after 4 years reliable. HD of what size should I buy? (2.5 "or 3.5")

  All other things to consider when buying a laptop compatibility internal HD?

  Thank you!

  Ben.

  Gardman is right there are 2.5 "HDD with IDE (ATA-5) interface.

• Error No. Boot Disk was detected or the drive failed - h8-1020 Desktop

  1 hp pavilion HPE h8-1020

  2. windows 7 64 bit

  3. Realtek PCIe GBE Family Controller series v2.38 24/12/10

  Error: No boot disk was detected or the drive failed.

  4. no changes to the system.

  After I restarted my computer about 7 times it finally started, so for me to be able to write this message.  However, this problem occurred several times over the last week or two. I get a blue screen, then the computer goes into a splash screen and I get the above error.  Of course, I'm 2 months past my warranty period, so I'm here, GROUND.

  Is my hard drive on its way? Is there a possible difficulty for this seizure completely breaks down?  Information to help save my machine would be great and much appreciated.  Thank you!

  P.S. I ran a diagnostic and all past test except the bootable disc.  But for some reason when I restart a little more time it get passed my system and begins running.

  Note: I created recovery discs and I backed up all my files.

  Hello:

  In my view, there is nothing you can do to repair the drive except to replace it.

  You can run the checkdisk utility and check both boxes.

  Please see the link below for more information.

  http://www.w7forums.com/use-chkdsk-check-disk-t448.html

  Please understand that this will only delay the inevitable at best.

  Paul

• HP Pavilion G6 HARD drive failed

  Hello

  First of all thank you for help out me.

  I searched the forums for how to do this, but for my situation, I can't find an answer. I'm ok with the technology, but by no means a tech guru... Here's what I've done so far:

  History:

  My sister gave me her cell phone on the weekend and said that he cannot start Windows 8. So I tried a lot of things so he can start and have failed. I tested the hard drive and it says that there are errors on this subject. I tried to use a Ubuntu Livecd to capture data off and have problems, but I'll be able to get most of it.

  Problem:

  I need to replace the hard drive and she never made the recovery discs. What is my best course of action at this point?

  1. Can I reproduce the hard drive failed on a new and hope the recovery partition intact? Restore from that?
  2. Can I install from disc OEM of Windows 8? I don't think I can...
  3. Can I get the key of Windows 8 from the BIOS somehow or I'll have to grab something like belarc to and hope that I can enter the key of the HDD failure?

  Any other suggestions on how to do it? I rather just use an OEM drive with his key and install from scratch, but I need the key and I don't know if it will work?

  Thanks in advance!

  Hello

  There are two options available.

  1. you can order a set of replacement of the recovery media using the link below - it will reinstall the operating system, all the drivers, and almost all of the original software (the exception being often tests of MS Office).  They will also recreate all of the original scores, including the recovery Partition.

  Order HP recovery disks.

  2. If the laptop is originally shipped with Windows 8, the activation key is stored in the Bios Chip and is read automatically during installation, so you could create your own OEM of Windows 8 install disc.

  For more information on how to proceed, see the post by Hüffer 3rd on the following link - Note: there is a cap of this Image file download you may need to try over a period of a few hours before the download starts correctly.

  http://h30434.www3.HP.com/T5/notebook-hardware/need-product-key/m-p/2592099/highlight/false#M96668

  With regard to creation of installation media for this file, here are some options.

  If you want to create an installation disc, use an application like ImgBurn ( Note: you can deselect additional software during installation of ImgBurn offerings)- hereis a guide on the use of ImgBurn to write an ISO on a disc.

  If you need a utility to create a flashdrive bootable for this Image, try the free app below.

  http://Rufus.AKEO.IE/

  Best regards

  DP - K

• HP Pavilion TouchSmart 23-f202: no boot disk was detected or the drive failed

  On startup, I get the message "no boot disk was detected or the drive failed.

  I bought a new H/D, installed and at startup I get the same message that I got on the old H/D.

  As there was no disc provided with the computer when I bought what I'm doing, had to do to get this sucker to the top and work?

  Hi @Jimmy56,

  Welcome to the Forums of HP Support! I understand that you had a type "no boot drive has been detected" error at startup to the top, and you have replaced the hard drive and have the same problem. I'm happy to help you with this.

  If replace you the original hard disk, you can use the following to test the hard drive. It is possible, there was a connectivity issue and just re-allocation of places the hard drive could make a difference. Computers HP - display of error HDD before starting the computer

  The most recent hard disk you put in, if not there was no operating system installed, you'll get the same type of message. You could make the same diagnosis of HDD from the link above, just to make sure that the disc is good.

  Please let me know the results, but so just install the original in the system hard disk works, and it starts correctly, so please mark this message as a solution. Bravo would be appreciated as well.

• HP 2000-2B09WM DVD drive don't read do not; a Windows 8

  HP 2000-2B09WM DVD drive don't read do not. I have Windows 8 OS. Have you tried the MS CD/DVD it Fix troubleshooter and I am given the following: media in the CD/DVD drive is not readable (hp DVD A DS8A8SH SATA CdRom Device)... Not fixed.

  So, how can it be resolved? Thank you.

  Hello @jsilvester2006 ,

  Welcome to the HP Forums!

  I understand that your CD/DVD drive on your laptop does not work.

  Can you please answer the following questions:

  You have recently installed software or Windows updates?

  When did you start in this topic?

  Have you tried several DVD?

  Make sure you have the latest version of the installed CyberLink PowerDVD software. Without this software, the DVD drive cannot read DVD or Blu - ray discs. You can download this software here: the CyberLink PowerDVD software.

  You can also try to do a restore system before the issue started if it a question recently of news. You can access the restoration through the HP Recovery Manager by tapping the F11 key, while the portable lights.

  I would like to know if it works for you.

• How to disconnect an internal DVD drive failing?

  My PC under Windows XP SP3 has a failed internal DVD burner.  I can log out without physically deleting? If not, can I just physically remove it (following appropriate procedure) and restart the system?  I have a DVD burner external replacement which works fine if I don't want to replace the internal drive fails. Any advice much appreciated.

  Right click on my computer > properties > hardware > Device Manager > click the CD or DVD drive marked entry > right-click on the sick drive > properties > at the bottom of the window, you have two options: to use the drive or turn it off > select Disable > OK > apply (if requested) > re-boot > XP it will take is more into account.

  See you soon,.

  Jerry