Packard bell onetwo lost touch screen installation

Similar Questions

• Touch Packard Bell portal has stopped working.

  Original title: packard bell touchportal

  Touch Packard Bell portal has stopped working. Can someone please help?

  Hi RayHC,

  1. what exactly is the problem you face?

  2. when exactly you receive the error message?

  3. have you made a recent software or hardware changes to the system?

  Method 1:

  If you are using the Packard bell computer, you can consult the site Web of Packard bell and try to install the latest version of the drivers for Touchpad and other devices.

  http://www.PackardBell.com/support/?i=spec_videocard_geforce9500gs512&PPN=PB80X27502

  Method 2:

  You can also perform a clean boot and check if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: Make sure that you put the computer to a Normal startup once you have completed troubleshooting.

• Satellite U920T touch screen does not work with Windows 10

  Hello everyone
  I've updated to win 10 on my laptop & since I've lost the ability to touch my screen, it now works like a normal monitor.
  I searched for several weeks on the net for a solution, but I realized that Toshiba does not care to solve the problem so any who found a solution? It seems to be a driver or software related issue to win 8.1 & 10.

  Hello.

  Even as Dr. Joe... I also upgraded Windows 10 lost touch screen and camera. I returned to Windows 8.1 and I still haven't get touch screen. I seem to have lost my drivers HID Touch Screen as well.

  Anyone have any ideas on how to restore touch screen drivers? I can't find them in the download section of driver Toshiba after hours of research.

• Packard Bell m/c will now fire up to the "home page" - MS system is Windows XP

  Windows xp now will not pull upward on the old Packard Bell computer, then the screen falls in "sleep" mode I have the original Windows XP disks, but does not help. Can I make a record of 'boot' via the net using my second computer?

  Here are the instructions to burn a cd for the disk to boot Hiren that you can then run checkdisk, a memory test and other tools

  Courtesy of Jose Ibarra

  Do you have a Hiren Boot CD, which you can download here:
  
  http://www.hirensbootcd.org/download/

  The ZIP file is large, so the download will take probably a little while to complete the bit it is worth.  Then unzip the download to extract the Hirens.BootCD.ISO file that will be used to create your new bootable CD.

  Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

  In the file Hiren ZIP are the file BurnToCD.cmd that you can double-click to start, but I've never used and prefer to use ImgBurn.

  If you need a simple and CD burning, this is a free software popular software:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install anything from UniBlue or the Ask Toolbar (never install the ASK toolbar for nothing).

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your new bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.

  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.  It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.

  A way to check the drive for errors is to open my computer and right-click on your afflicted player and choose Properties, tools, error, check checking now... put a check mark in the boxes and then start.

  Sometimes that works, then you can also click on start, run and in the type box:

  cmd

  Click OK to open a command prompt window and enter the following command (assuming that XP is installed on your C drive)

  CHKDSK c: /r

  This disk check can last a long time (perhaps several to several hours) depending on the size of the volume, the amount of data on the volume and what the disk check finds to do.

  Let chkdsk finish to correct the problems, he could find.

  According to the speed of your system, the size of the volume, the amount of data on the volume and what chkdsk finds to do, he may take a long time for chkdsk with error correction to complete (several hours) or it may seem to be 'stuck '.  Be patient.  If the HARD drive led blinks always, chkdsk is something to not interrupt him.  It finally end one way or the other.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You may need to run Chkdsk c:/r more than once.

• Packard Bell M3671: New installation will not leave my upgrade or install updates

  Hello

  My mother has a Packard Bell M3871. Recently, she had a problem she turn on the computer and the date would go to 01/01/2011 and not all startup applications start as the antivirus, etc. I decided to restore the system to factory settings. Worked well. The day following the date returned in 2011 and I was not able to use internet as he said the connection is not private and it was recommended to install updates. So I waited a few hours while he was looking for updates and without success. Continues the search now and find nothing. I even tried the upgrade to windows 10 but the GET installation stuck at 99% and after a manual reboot as usual, loads of windows 7.

  Any help is much appreciated!

  Hello:

  See if these two updates of W7 installed solves the problem.

  https://support.Microsoft.com/en-us/KB/3083710

  https://support.Microsoft.com/en-us/KB/3102810

  You can also read this article for more info...

  http://www.ZDNet.com/article/sticking-with-Windows-7-the-forecast-calls-for-pain/

• Connection with the touch screen is lost

  Since I upgraded my c40 and sx20 to TC7.0.1, I was see the message below. This occurs after the reboot. We do not have touch screens so I would stop this message to come.

  

  I tried the option "disable pairing and restart", but this does not prevent the message. I also made sure that UserInterface > TouchPanel is set to 'none '...

  ROLE of touchscreen DefaultPanel year UserInterface = user: no

  Don't know what else to check.

  There is a thread on this already (here) which includes the hotfix:

  xConfiguration Experimental SystemUnit MenuType: Interactive

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• Touch screen not working not not after upgrade from 8.1 to win

  I have a PC HP Envy product number X 2 C2K61UA #ABA now Win 8.1 32 bit running. After the upgrade is installed, the screen no longer meets a contact. On the other hand, the touchpad works.

  Masters,

  Welcome to the HP Forum.

  I just went through this process on my own want of X 2 and the touch screen is OK after the upgrade.

  Something that I've done that maybe makes the difference: I have day all driver sets for Windows 8.1 before the upgrade.  Pilots have been out for awhile; the drivers for the 8.1 are also compatible with Windows 8 update was possible before installing the Windows 8.1 operating system.

  I had also stripped most of my personal computer programs: I refresh the system using a customized several months back Image, which included only a relatively bare installation and installation of Microsoft Office standard packages.  I left installed HP SimplePass (I use a device of fingerprinter USB with this computer) and my photo editing software that has been designed for Windows 7 which was SO painful to install that I decided to take the risk of letting up.   Those who survived.

  The stripped upgrade Firefox and Chrome (no biggie), Flash, Kindle, various programs and the old OneDrive files the installer for Windows 8 and a couple of obsolete Broadcom drivers.

  • If you not already have, update all your drivers from the website of media from your computer.  You can always reinstall the drivers - if they have already been installed, you can select "Yes to all" and reinstall / reload the packages during the installation.  Restart the computer after installation.
  • You must run also immediately the Windows updates to 8.1 after the upgrade - there is not zillions of updates, but there are several critical fixes that you do not want to get on the system.

  Changes

  Content deleted from here about RemovedApps - it was not correct for this context.

  • If you find that the question is one of the 'lost files', structure pilot, lost 'something' - lost-at so you can get in C:\Windows.old offending data / missing.  You have 28 days from the date of the upgrade.  I'm not sure of the type of 'time bomb' built into the data - you might be able to actually prevent lost data by copying to an external drive if you really want to keep.

  I hope this helps.

  Click on the Thumbs-Up Kudos to say thank you for the help.

  While I strive to reflect best practices of HP, I do not work for HP.

• Cannot restore my net book of packard bell back factory settings

  Please can someone help me I have restored my net book of packard bell back to factory settings that it kept freezing now the screen is stuck and just said the Installer starts services but nothing is past help

  Discussions were merged.

  Double not deleted to "inflate" list

  If this does not work, I suggest you contact Packard Bell for assistance this is a Netbook with no DVD player.

  Download the ISO file.

  http://www.w7forums.com/threads/official-Windows-7-SP1-ISO-image-downloads.12325/page-2#post-124821

  Use the product key on the machine:

  

  Using the method of USB in conjunction with the Windows 7 download preceding:

  http://www.SevenForums.com/tutorials/2432-USB-Windows-7-installation-key-drive-create.html

  "How to get and use the Windows 7 USB/DVD Download Tool"

  http://www.SevenForums.com/tutorials/31541-Windows-7-USB-DVD-download-tool.html

  By using the downloaded ISO file method can require the Activation of phone.

  If it does require phone activation, do not follow Demand of Auto, but brace yourself for a real person explain as to what has been done for purposes of re-setup

  "How to activate Windows 7 by phone '

  http://www.SevenForums.com/tutorials/18715-activate-Windows-7-phone.html

  The above method also requires that you go to your computer manufacturer's website > Support and downloads Section > locate your model number and operating system > then download and install the latest drivers for it.

  See you soon.

• my iphone 6 more screen sudeenly Gets a little blurry. touch screen does not

  Hello team,

  I bought the Iphone 6 more. that worked very well the last 6 months but suddenly I see that the LCD is completely blurred. touch screen works not. even when I am clicking on the home button or the sleep nothing works. After clicking the button sleep repeatedly the screen starts to work. It's really me trouble because I'm not able to receive the phone several times. Can someone help me if this is a known issue and what is the solution for this? just a heads up that there is no coincidence.

  Try a Reset: press and hold the sleep/wake button and the Home button at the same time for at least 10 seconds, until the Apple logo appears. -Note: no data will be lost

• touch screens

  Changing from PC to MAC OS X with Pro. Have lost the 'touch' with my Touch Iiyama 24 "screen. How can I get that back?

  Check with the manufacturer of the appropriate driver software.

  Make sure that all connections of the screen are connected and secure, especially one that provides info from the touch screen to the computer.

• Satellite U920T - touch screen does not

  The touch screen on my U920T satellite does not work from a few days back.
  I can't find all the settings for touch or any (except the touchpad) touchscreen device in Device Manager.

  I'm not sure exaclty when he started to malfunction.
  I installed the 8.1 Windows a few months ago and had a problem with the card wireless at the beginning, but the problem with the touch screen just appeard this week.

  What driver Toshiba control the touch screen?
  Is it a hardware problem or software?

  Hello

  To be honest there is no special driver to control the touch screen.
  The driver is provided by the Windows System.

  I think you should get the laptop back to factory settings but I fear that this will not solve the problem of Mr. smells like a hardware problem because I found some threads here in this forum about the dysfunction of the touch screen and especially the problem could be solved by service agents.

  By the way: before you run the recovery process try to configure the stylus and touch screen.
  Go to the control panel (Windows key + X-> Control Panel)-> Tablet PC setting.
  The first display tab contains options such as configure screen stylus and touchscreen.
  Here, you should be able to start the installation program and identify the touchscreen.
  The first option must contain 1 internal LCD
  At the bottom, you might find button to calibrate and reset the settings for the internal LCD.

• Satellite U920T - duplex cam + touch screen + win button does not work

  I have the problem as the touch screen + frontal camera + camera rear windows on the screen button do not work.

  I tried to install the drivers to display/graphics but that has not helped.

  I bought this laptop from Saudi Arabia and it is still under warranty but I am out of country, so I can't ask the warranty as well.

  someone please fix this and tell me the solution, or tell me what I need to do?

  Help will be really appreciated.
  some details on my laptop:

  Toshiba Satellite U920T-B919.
  Windows 8.1 updated 64-bit.

  Thank you

  Since you mentioned different problems with your laptop, I think that in this case its recommended to get the laptop back to factory settings just to check if all these problems are related to the problem of system.

  Regarding the webcam: Windows 8/8.1 already contains the webcam drivers and therefore additional webcam driver installation isn t possible. Extra webcam driver is not simply.

  From my point of few smells of any description as a bit of a problem of material, the upper part of the slide where the touch screen is part of.
  The key win as well that the two cams are located and there are probably some lose the connection between the two parties (touchscreen and keyboard)

  Anyway, as I said more top, its recommended to recover the laptop to factory settings just to make sure that the system isn t the troublemaker.
  In case of hardware problems, you must get in touch service available in your country.

• Satellite U920 - touch screen no longer works

  My touch screen stopped working all of a sudden not. I can use the laptop by the keyboard and mouse. Is it possible that I went it accidentally extinguished by a combination of keyboard?

  How can I solve this?

  To my knowledge, there is no shortcut keyboard or combination that would be activated or deactivate the touch screen.

  But try to calibrate the touch screen (digitizer). You must go to the control panel (Windows key + X-> Control Panel). You will find a Tablet PC setting.

  The first tab called display contain some options such as configure the stylus and touchscreen. Here, you should be able to start the installation program and identify the touchscreen.

  In the screen options 1 internal LCD must be chosen.
  In addition, you can calibrate and reset the settings for the internal LCD.

  Check if this is possible

• How to disable the Portege M700 touch screen?

  I have a Portege M700 tablet.
  I would like to disable the installation of the touch screen on it (but not writing or drawing ability activated by the stylus).

  Is this possible?

  My friend has a M700 and it has disabled the touch screen feature, so it is possible.

  I don't know exactly how do it, check the user manual, or go to the control panel and watch in the utility of the tablet.

• Satellite U840T-103 - touch screen no longer works

  So, I got the computer toshiba laptop for a little over 3 months and run since version 8.1 Win.

  Laptop computer and touch screen worked fine until today, when it comes no longer responds to my touch.

  The laptop has always he has touchscreen, it just doesn't work!

  Any ideas?

  Thank you
  Adam.

  Hello

  Go to the control panel (Windows key + X-> Control Panel)-> Tablet PC setting.
  The first display tab contains options such as configure screen stylus and touchscreen.
  Here, you should be able to start the installation program and identify the touchscreen.
  The first option must contain 1 internal LCD
  At the bottom, you might find button to calibrate and reset the settings for the internal LCD.

  If this does not work, the problem might be related to a hardware malfunction.
  In this case, only a technician would be able to help you.