Connection with the touch screen is lost
Since I upgraded my c40 and sx20 to TC7.0.1, I was see the message below. This occurs after the reboot. We do not have touch screens so I would stop this message to come.
I tried the option "disable pairing and restart", but this does not prevent the message. I also made sure that UserInterface > TouchPanel is set to 'none '...
ROLE of touchscreen DefaultPanel year UserInterface = user: no
Don't know what else to check.
There is a thread on this already (here) which includes the hotfix:
xConfiguration Experimental SystemUnit MenuType: Interactive
Wayne
--
Remember the frequency responses and mark your question as answered as appropriate.
Tags: Cisco Support
Similar Questions
-
Problems with the touch screen of HP all-in-One after upgrading Windows
I recently updated my version of Windows (64-bit) with system updates and then a full version updated to version 8.0 version 8.1. After the update is complete, I started to experience a strange problem with the touch screen on my HP Envy Rove. The screen would flash repeatedly one set of points in the right lower quadrant of the screen as if the simulation random screen button. There is no way to stop this. If the screen on a keyboard was pulled up, letters in the place of the flashes would be broadcast in the fields on the screen.
The only way to stop the flashes of screen has been to go into the Device Manager and disable the HID-Compliant device driver. It stopped (system generated keys) flashes, but also disabled my touch screen input. So now the system is usable, but without the benefit of the touchscreen.
Here is the information on the driver:
HID-Compliant device
Date: 21/06/2006
Version: 6.2.9200.16851
(input.inf)
I tried updating the driver, but this seems to be the latest version available. Go back to the previous version of the driver, could solve the problem, but I could not locate on the support web site.
Any suggestions on how to solve this problem and re-enable the ability of my touch screen?
Hello
Downloaded drivers from the manufacturer will be the most tested and up to date available. The best place to download a driver is directly from the manufacturer of the equipment.
So I suggest you to install the driver that is available on the HP website for your model.
Troubleshooting of touch screen in Windows 8
http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c03488148
Just reply with the results.
-
Help with the touch screen!
Hello, I hope someone could help me. I just installed Windows 8 Professional on my TouchSmart 520-1070, and now the touchscreen does not work. I tried updating the driver, but that didn't work. I'm not computer savvy, but it does not work?
How can I solve this problem? If anyone from HP is there, please help! Heck, if someone knows the answer, please help!
OK... no one answered, but I guess it's ok because I've solved the problem. You must make the updates for the office and add the extras. It is the Extras where the updated driver is for the touch screen.
-
Firefox works with the touch screen technology windows 8?
Plan to buy all-in-one touch screen pc and want to know if Firefox browser works well with this technology.
Yes it is on the right. as the article linked in my response earlier said that the touch interface is currently available in early development builds, which are mainly for the developers and users very advanced and not recommended for daily use. Firefox 26 will come on the aurora in mid channel one to beat late October - these build would give you the opportunity to test and to discover the new format in a more stable form (provided that the calendar holds).
-
Major problem with the touch screen after upgrade Windows 10
I bought a Lenovo Yoga 3 14 "a few weeks ago and upgraded to Windows 10 as soon as I got it.
Since I started using it, the touchscreen will be occaisionally go "crazy". Crazy is the best way I can describe it because it will start input touch by ignoring or doing his own random touch input on the screen. Nothing the laptop will start to switch between windows and opening and closing of the things.
This laptop is not running Windows 8.1 long enough for me to know if she has had this problem before the upgrade.
Any ideas?
Nice day.
For information, please see: https://forums.lenovo.com/t5/Lenovo-Yoga-Series-Notebooks/Yoga-3-14-inch-Touch-Screen-Issues/td-p/20...
and then more precisely: https://forums.lenovo.com/t5/Lenovo-Yoga-Series-Notebooks/Yoga-3-14-inch-Touch-Screen-Issues/m-p/214...
I hope this helps.
Kind regards.
-
Problem with the touch screen on SWITCH 10
Hello
Today, I have a problem of strainge - my SWITCH 10 now do not react on my touch. Keyboard ability very well, but when I have a touch screen - nothing happends. Reload - nothing happened. May be that I disable it somehow?
Hope for your help
-
I have a problem with the touch screen of Sony.
Original title: "Sony touchscreen issues."
I am running Windows 7 Home Premium on a Sony All In One with touchscreen. For about 4 weeks, I got a problem with weird things happening on the screen. For example, I can use any application and it will automatically become minimized and I'm now looking at the level of the office. Other times on keyboard screen will appear in itself. Do not know what is happening, but it sure is frustrating the heck out of me. Answer from Sony is that I put the computer back to factory settings, thus losing my files and programs. Is there a way I can back up the system and retrieve my programs from the backup. I don't know if I can find my original downloads, including Office 2010.
Thanks a lot for your help.
Dennis
Hello
IAM having the same problem with my Sony all in one touch with Windows 7 home Premium edition running, did you get your problem solved, please let me know what I need to fix, it is very annoying to use the computer now that the application itself minimizes every minute.
Help, please
-Irshad
-
Is there a driver for my HP compatible with the touch screen?
I have a desktop PC HP Pavilion p7-1414 and recently bought an Acer T232HL screen touchscreen monitor. I was told that it was compatible. I can't have the touchscreen to work and when I went to the PC Info it says "no net or touch is available for display" y at - it a download available to make it work
Hello
You actually need 2 drivers: 1 for the Acer and the other for the video card. I can't find the driver from Acer for you, but try to please (similar to Windows 7):
and the driver for the video card:
Kind regards.
-
Sensor of fingerprint identification does not work and the touch screen unresponsive
iPhone 5 s 32 GB Stopped working sensor of fingerprint identity with the touch screen not responding
latest version of iOS
Flickering of screen there are some horizontal lines appear on the screen for a while in very minor rainbow color
went to the apple support no help in troubleshooting. They asked me to request a replacement pay for 22K INR.
I think that it is not worth getting a replacement of the delivered phone to new/old version as new series is available in the market, paying a large amount.
I would like to hear your valuable contributions.
-
Why the touch screen is good for the design of the window?
Touchscreen seems to be an approach of incorrect interface on the design window, I need a lot of lotion to keep my skin healthy, been to designers?
Thank you
Well, a touch screen is completely optional with Windows 8. While it is designed for you to use a touchscreen, there is nothing in the design that prevents you from using a mouse and a keyboard. In fact, IMO it works a little better with m/k with the touch screen.
It's just an additional way to interact with your computer - touch screen is not intended to replace other ways.
-
EX60 - lost the connection with the control device
After upgrading my 6.3.1 to 7.1.1 EX60 I get now "Lost connection with adjustment" and the touch control panel is located in a loop of spinning.
I also get the following in the web interface on the EX60 management:
ERROR: Connection of the touch panel
No touch screen detected when indicators forcedIf I go down to 6.3.1 it works again. I already rebooted and factory resets the device unplugged and reconnected the touchscreen.
Hello
Have you tried a factory reset touch by organizing the "!" symbol for 10-15 seconds seconds until it turns on and then pressing "mute" button two times.
Video posted on the following link
https://supportforums.Cisco.com/video/11930611/resetting-Cisco-teleprese...
HTH
Manish
-
When I play the virtual Interactiver - Second Life Community. The screen turns white and windows tells me the display adapter stopped responding and has recovered. While the second life Viewer is still Virgin (white). I get the error in a box: The Nvidia OpenGL driver lost connection with the display driver and can not continue. The application must close. Please visit http://www.nvidia.com/page/support.html for help. Error code 8. Now, I worked with Nvidia to do a clean install of the latest version of the driver. a driver in safe mode installation. They suggested to try an earlier version of the driver. Nothing that they worked me and told me to see Microsoft. The pilot hangs every 30 min or so, all online in the second game of life. Can someone help me?
Information System
------------------
Time of this report: 13/06/2011, 19:40:20
Machine name: BEN - PC
Operating system: Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.110408) - 1631
Language: English (regional setting: English)
System manufacturer: HP-Pavilion
System model: GC670AA-ABA a6120n
BIOS: Phoenix - AwardBIOS v6.00PG
Processor: Intel (r) Core (TM) 2 Duo CPU E4400 @ 2.00 GHz (2 CPUs), ~2.0GHz
Memory: 4096 MB RAM
Available OS memory: 3582MB RAM
Page file: 1690MB used, 5472 MB of available space
Windows Dir: C:\Windows
DirectX version: DirectX 11
DX setup parameters: not found
User DPI setting: 96 DPI (100%)
System DPI setting: 96 DPI (100%)
DWM DPI Scaling: disabled
DxDiag Version: 6.01.7601.17514 64 bit UnicodeTwo monitors
Display devices
---------------
Card name: NVIDIA GeForce 7600 GT
Manufacturer: NVIDIA
Track type: GeForce 7600 GT
DAC type: Integrated RAMDAC
The device key: Enum\PCI\VEN_10DE & DEV_0391 & SUBSYS_201F19F1 & REV_A1
Memory display: 1768 MB
Dedicated memory: 248 MB
Shared memory: 1519 MB
Current mode: 1600 x 900 (32 bit) (60 Hz)
Name of the monitor: generic PnP monitor
Monitor model: G205H (Acer)Card name: NVIDIA GeForce 7600 GT
Manufacturer: NVIDIA
Track type: GeForce 7600 GT
DAC type: Integrated RAMDAC
The device key: Enum\PCI\VEN_10DE & DEV_0391 & SUBSYS_201F19F1 & REV_A1
Memory display: 1768 MB
Dedicated memory: 248 MB
Shared memory: 1519 MB
Current mode: 1280 x 1024 (32 bit) (60 Hz)
Name of the monitor: generic PnP monitor
Monitor model: NEC LCD7VHello
I suggest that you have watch the following link below:
http://forums.developer.nvidia.com/index.php?showtopic=5331
I hope this helps.
-
I'm trying to establish a connection between my iPhone and my iMac. The Bluetooth device in the iMac screen must be certified for IFM establishes a connection with the iPhone?
This connectivity is not supported (except to attach them). What you trying to do?
Barry
-
Driver NVIDIA OpenGL lost the connection with the display driver
Laptop Alienware M14x
Windows 7 pre 64-bit
8 GB ram
3 GB of video: NVIDIA GeForce GT 555 M
Intel i7 2760QM
AE CS4
Æ keeps crashing. I get the following message while doing something as simple as scrubbing through the timeline, or change the opacity of a layer. 1080 p, I have a layer of the image, a solid, color corrections, and that's all. I just got this new computer, and I've never had this problem on my old computer.
This message is displayed after AE blocks. "The driver NVIDIA OpenGL lost the connection with the display driver and can not continue. The application must close. »
This message is displayed in the taskbar: "display driver stopped responding and has recovered. Display driver NVIDIA Windows kernel Mode Driver, Version 267.21 stopped responding and has successfully recovered"
any ideas on how to stop EI do not cause my display driver to stop working?
Thanks, Ramzi Rebeiz
Turn off OpenGL in the AE preferences.
Mylenium
-
My iPhone 5, iOS 9.0.2 does not respond to touch. (broken touchscreen) and my home button is broken. my battery is fully charged so that it would take too long to wait until it turns off. I need a way to Hard reset it without a button at home and the touch screen. I know there are 3rd party apps that could do this, but I can't open my phone (no password protection) to 'trust' on this computer. If there are applications that could work around this? Any help is appreciated.
There is no way to do it. You have 2 hardware problems. Time to replace the phone.
Maybe you are looking for
-
Demon NTP using a lot of cycles CPU
My MacBook Pro (early 2011) running OS 10.11.4 fonctionnee hot and slow recently. I turned on Activity Monitor and ntpd (the demon of time network) is constantly to consume 12 to 15% of cycles CPU. I found an article on the stack Exchange, who said
-
autonomy of 12 h and 50% phone idle
Hello Usually, I unplug my phone in the morning. I use it to listen to music, a bit of browsing and e-mail. However lately he does barely until the evening. After about 12 hours, the battery is almost dead and inactive phone is by far the worst consu
-
G7-1222nr Pavilion: hardware diagnostic test failed
ID of congestive GSMAXS - S 5, 9859 - MFPV5F - 60W503 Rebecca Goveia
-
menu of attachment of e-mail does not display the new photo folders
When sending an attachment, the drop down menu does not show current photo records
-
Network of field vs Local machine settings
I was invited by a project manager to make changes to a large number of PC, because we have changed to a new IP subnet for the entire Department. It is a domain environment, but I wonder to make changes by logging in to the local machines (as opposed