Page can not be displayed (11i applications) using the public IP address

Similar Questions

• BlackBerry Smartphones can not add or Remove Applications using the latest Blackberry Desktop Application, 700_b060_multilanguage.

  1. I was running Blackberry Desktop BBM 610_b038_multilanguage.

  2. I installed it yesterday, 700_b060_multilanguage.

  3. I was offered an update of my device software, 5.0.0.975 I did not because I wanted to take a backup first.

  4. after the backup, when I tried to update, he told me that no updates exist.

  5. after that, when I plugged in the set, I saw many new options in the Application section.

  6. There was a lot of languages and applications such as Facebook obnoxious that I didn't.

  7. I can't be able to add/remove languages, AND other Applications.

  8. I select (+) or clear (x) my required applications and click apply.

  9. something seems to happen, and then I'm back to the same page where I was with the same Applications installed that were there at the beginning. Two options that are at the bottom of the section that tells the actions pending poster always two actions that were there in the first place.

  10. What can I do to remove the additional languages and installed applications and install this than anything I really need?

  Thank you.

  PAL

  PS. I can't have a data Plan on this subject for the next two weeks or so my number is in migration to be a pre paid to a post paid connection that offers services of BB.

  

  sdgardne wrote:

  FYI... we seem to be discussed a set of interrelated issues on multiple threads... Here is a...

  • http://supportforums.BlackBerry.com/T5/desktop-software-for-PC/cannot-add-a-language-to-my-device/m-...

  I do not know where to consolidate them all for... According to me, that there are more threads with same interdependent questions...

  This is not useful at all.

  Double and permutation on the same questions just causes frustration users trying to follow different threads and various information.

  So let's abandon this thread.

• Device Manager page can not be displayed.

  I'm not able to see the devices and the page can not be displayed in the Device Manager.

  This is the error message you get:

  MMC cannot open the file C:\WINDOWS\system32\devmgmt.msc.

  It is perhaps because the file does not exist, is not the MMC, or was created by a later version of MMC. Perhaps it is also because you don't have sufficient access to the file.

  If so, see http://support.microsoft.com/kb/914231

• Can not do a screen shot using the command shift 4. Unable to capture the States. I restart the Mac.

  Can not do a screen shot using the command shift 4. Unable to capture the States. I restart the Mac.

  It is to capture a piece of the element you want to screenshot, make a fire using full-screen control + 3

• The Page Can not be displayed error on most Web sites

  Recently I had problems with my web browser (Internet Explorer 10) in which it does not have most of the sites. It can make google.co.uk but not google.com. This also happens when I try in Google Chrome, I get this error:

  "We are unable to display this Web page because it took too long to respond."

  Error code: ERR_CONNECTION_TIMED_OUT

  I don't think that it's to do with the router that I can use another device to connect to it and it works wireless, too. I forgot to mention that there is a wireless network connection.

  I also ran network troubleshooting and it mentions the network cable may be broken and damaged. I tried to change my DNS settings, but the problem persists!

  Could you please help me solve this problem? Thanks in advance.

  Furthermore, I use Windows 8 x 64 bit.

  Hello

  To better understand the issue, let me know if you make recent changes on the computer before this problem?

  This problem might have occurred because of these reasons:

  1. bad Internet Explorer Settings.

  2. due to virus.

  3. conflicts between third party applications.

  I suggest you try the procedure described in the article and see if it helps.

  "Internet Explorer cannot display the webpage" error in Internet Explorer
  http://support.Microsoft.com/kb/956196

  Note:

  1. Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
  2. Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
  3. This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the the Microsoft Knowledge Base:
  4. After the boot minimum troubleshooting step, follow step 3 in the link provided to return the computer to a Normal startup mode.
  5. When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
  6. When you refresh your PC, applications that you have installed Web sites and DVD is deleted. The applications provided with your PC and applications that you have installed in the Windows store will be resettled. Windows puts a list of apps removed on your desktop after you refresh your PC.

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• can not enable web services. printer on the network. ip address by default do not connect using auto ip

  B210 - tried to reset the default values. default IP address does not connect to the network with auto that IP had to manually set IP addrtess something similar to the properties on the zone reactive verzion. can not disable web services - never activated.

  no primary or secondary DNS server. not sure if this is problem. can print ok via network.

  I used the manners of address google DNS gave you me and it connected to the web and downloaded the updates and gave the address of e-mail. I t may have had difficulties as the gaveme just of the printer a message that he could not reconnect. not sure about that. Another question please. Do I need a setting WINS? I'll try an email print from a different network. Thank you

• BlackBerry Z3 can I create a Blackberry ID using the same email address, but with a different password?

  I use 2 phones and I am ready to create a new blackberry on the 2nd ID, but it requires an email address and I don't have that one email address that I use for everything. I want to know if it is possible to create a new BBID with the same e-mail address but different password. The main thing is I want both phones to be active and fully functional, but I don't have a single address email and I prefer not to create another email address, because I love all of my emails in one place rather then having 2 email addresses. I don't want any phone be disabled. I do not fear one of the BBM is turned off, as long as at least one works. Both phones are a Blackberry Curve 9320 and a Blackberry z10, which is one waiting to be activated.

  No this is not possible. The BBID, you use is associated with the device, you are using, the e-mail address is the user and cannot be associated with two BlackBerry smartphones to consider it time of the password.

  I suggest that you create a new e-mail address for the sole purpose of using it as a BlackBerry ID.

  www.bbid.com

• internal web server access to the content of the network using the public ip address

  Hi, I saw similar topics, but not a clear answer about it. I have a PIX 515e with two interfaces, a web server internal (ip 192.168.0.5) and internal users want to access the server by its (99.99.99.9) ie public ip address is not using DNS. Tried the command alias ' alias (inside) 99.99.99.9 192.168.0.5 "but does not work for http. I can access the server on the local network using the public address for smtp, pop3 and ftp with or without command alias, but not the http service. Any idea?

  a few quick comments.

  a function of the command "alias" is to force the pix to manipulate the dns response. However, you mentioned that you didn't use dns.

  'alias' command will also force the pix to send traffic to 192.168.0.5 when it receives a packet from the inside and intended to be 99.99.99.9. However, since the host and the server are located in the same segment, i.e. pix must re - route the packet to the inside interface, and this operation is not supported with pix v6.x.

  In addition, you mentioned the inside host can access the smtp, pop3 and ftp using 99.99.99.9. This is interesting because the host of 192.168.0.0 would not directly have access to the host of 99.99.99.x without router.

• Page can not be displayed error when connect on the EBS homepage

  Hi all
  
  I have a connection problem to EBS page, if only one responsibility is active for user it will get error Page cannot be displayed error 404 on the main Menu.
  However, if 2 or more responsibilities are active no error will appear and it will show all the responsibilities.
  Here is the log that I got from apache.
  
  
  [Thu Apr 28 15:58:26 2011] [Warning] mod_plsql: connection outdated due to the Oracle 6502 error
  [Thu Apr 28 15:58:26 2011] [error] mod_plsql: /pls/XXX/OracleNavigate.menuBypass ORA-6502
  ORA-06502: PL/SQL: digital error or value: hex to raw conversion error
  ORA-06512: at the 'APPS '. ICX_CALL', line 1077
  ORA-06512: at the 'APPS '. ORACLENAVIGATE', line 2358
  ORA-06512: at line 28
  
  Grateful if someone can share something about it.
  
  Database server
  ----------------------------------------
  RDBMS: 10.2.0.2.0
  Oracle Applications: 11.5.10.2
  
  Thank you very much

  The responsibility of a forms? If so, MOS Doc 555580.1 ("Oraclenavigate.Menubypass was not found" error on Login after CPU Oct 2007) may be relevant

  Srini

• Get rid of the current wireless network connection so that I can set up a new connection using the same IP address.

  Here's my problem: I got a new computer and a wireless network connection has been set up and I could get on the internet. My daughter then wanted to try her new computer and somehow his computer is defined as the network and I can no longer connect to the internet via my computer.

  The second part of my problem is that when I try to configure my computer, I get the message that I need to go to the Micro knowledge base and article 871122.
  I did it.  By following the instructions for Windows configure my wireless, I get as far as the stage of network connections - go to change the settings for this network connection.  It is said that I had to go to the wireless network tab.  There is no tab wireless network I can say to use Windows to configure my network connections...

  I know it is long, but can someone help.  I use Windows XP Prof 2002 with service pack 3 version. Thank you adpotate

  (1) make sure that u run "NET START WZCSVC" on the command-line as soon as u Ouvrezunesession WINDOWS XP (START, RUN, NET START WZCSVC (command line)).

  (2) START, CONNECT, WIRELESS INTERNET CONNECTION

  --> under the 'GÉNÉRAL' tab: (1) right click on the wireless Internet connection; (2) click on properties; (3) make sure that all THE ELEMENTS under the title "THIS CONNECTION USES THE FOLLOWING ITEMS" are COMPLETELY FUNCTIONAL, i.e. UNCHECK THE ONES THAT DO ARE NOT ACTIVE ~!  (I recently turned off AVG and that this item has been inadvertently clicked on ~!) ;

  --> on the 'ADVANCED' tab: run the NETWORK CONFIGURATION WIZARD to reset your network

  3) http://support.microsoft.com/kb/871122 --> RUN 'DIFFICULTY CE PROBLEM' (ms - fix 50469)

• BlackBerry Z10 can I create a Blackberry ID using the same email address, but with a different password?

  I use 2 phones and I am ready to create a new blackberry on the 2nd ID, but it requires an email address and I don't have that one email address that I use for everything. I want to know if it is possible to create a new BBID with the same e-mail address but different password. The main thing is I want both phones to be active and fully functional, but I don't have a single address email and I prefer not to create another email address, because I love all of my emails in one place rather then having 2 email addresses. I don't want any phone be disabled. I do not fear one of the BBM is turned off, as long as at least one works. Both phones are a Blackberry Curve 9320 and a Blackberry z10, which is one waiting to be activated.

  No this is not possible, the e-mail address you used your BBID, is associated with the device that you use it on. It is also the BBID username. And cannot be used on another device, no matter that there is a different password.

  I suggest that you create a new e-mail account, just for the sole purpose of using it as a BBID.

  www.bbid.com

• Can not save 32-bit applications using Windows 7 64 - bit OS to Windows 7 libraries

  When I'm in a 32-bit application can't save file to "libraries."

  I navigate the 'C' drive to the location on the disc I want to save the file - the same is true for the inverse where in a 32-bit application I can't access the file in a library and attach it or open it - I have to navigate with 'C '.

  For example if I'm 32-bit Lotus Notes and save an attachment - I right click Select Save under and try to go to my library of Documents and click on save, I get "the specified module could not be found.

  I then navigate down into C/users/user_name/documents and settings / documents and saves them just fine. I checked the indexing settings, permissions, various other port of forums, etc... 64-bit applications work well

  Hi rjshaw,
  start your own thread with your system settings. Your system is not the same as the original, poster and it is confusing read.
  Eddie

• How can not delete an inactive application from the iPhone?

  I downloaded Aegean airlines app. It worked properly for a while, and then she became inactive after update and cannot be deleted be installed again. Please indicate how to remove app...

  I guess that to listen to them and to hold in the icon until it wiggles works. First go to settings > general > Restrictions > removing applications is set to off. If you use no restrictions go into settings > general > storage & use iCloud > storage > storage management. Let the list of load applications. Slide down to find the application you want to remove. Tap on it and then tap on delete App on the next screen.

• There can not download photos on Facebook using the uploader first mass shown?

  I have a Macbook Pro and you can't upload photos on Facebook with photo uploads mass automatic that appears first. IPhoto won't download right either, Safari will be but will not take the tags and captions.

  This has happened

  Each time Firefox opened

  == July of last year when I got a mac

  I was working until recently

• Photo search does not work in the Finder, but done in Spotlight.  In addition, can not see the Photos in other applications using the media browser

  Below is a screenshot of Photos with photo with the name IMG_1758.JPG.  On top of the image is my Finder window you are looking for this image under "This Mac" with no results.  Below the resulting from the spotlight that does not show the result.  I have only one library of photos under that user.  Also, if I am in another application such as Notes, Pages, Numbers, etc., I can't search and find images in the Photos.

  

  The Finder doesn't show images in boxes including the photo library.

  To access images sin Photos from another application using the media browser, this article was written for iphoto but it pretty much the same for Photos. The first option is to look for.

  https://discussions.Apple.com/docs/doc-4491