Device Manager page can not be displayed.

Similar Questions

• The Page Can not be displayed error on most Web sites

  Recently I had problems with my web browser (Internet Explorer 10) in which it does not have most of the sites. It can make google.co.uk but not google.com. This also happens when I try in Google Chrome, I get this error:

  "We are unable to display this Web page because it took too long to respond."

  Error code: ERR_CONNECTION_TIMED_OUT

  I don't think that it's to do with the router that I can use another device to connect to it and it works wireless, too. I forgot to mention that there is a wireless network connection.

  I also ran network troubleshooting and it mentions the network cable may be broken and damaged. I tried to change my DNS settings, but the problem persists!

  Could you please help me solve this problem? Thanks in advance.

  Furthermore, I use Windows 8 x 64 bit.

  Hello

  To better understand the issue, let me know if you make recent changes on the computer before this problem?

  This problem might have occurred because of these reasons:

  1. bad Internet Explorer Settings.

  2. due to virus.

  3. conflicts between third party applications.

  I suggest you try the procedure described in the article and see if it helps.

  "Internet Explorer cannot display the webpage" error in Internet Explorer
  http://support.Microsoft.com/kb/956196

  Note:

  1. Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
  2. Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
  3. This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the the Microsoft Knowledge Base:
  4. After the boot minimum troubleshooting step, follow step 3 in the link provided to return the computer to a Normal startup mode.
  5. When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
  6. When you refresh your PC, applications that you have installed Web sites and DVD is deleted. The applications provided with your PC and applications that you have installed in the Windows store will be resettled. Windows puts a list of apps removed on your desktop after you refresh your PC.

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• Page can not be displayed error when connect on the EBS homepage

  Hi all
  
  I have a connection problem to EBS page, if only one responsibility is active for user it will get error Page cannot be displayed error 404 on the main Menu.
  However, if 2 or more responsibilities are active no error will appear and it will show all the responsibilities.
  Here is the log that I got from apache.
  
  
  [Thu Apr 28 15:58:26 2011] [Warning] mod_plsql: connection outdated due to the Oracle 6502 error
  [Thu Apr 28 15:58:26 2011] [error] mod_plsql: /pls/XXX/OracleNavigate.menuBypass ORA-6502
  ORA-06502: PL/SQL: digital error or value: hex to raw conversion error
  ORA-06512: at the 'APPS '. ICX_CALL', line 1077
  ORA-06512: at the 'APPS '. ORACLENAVIGATE', line 2358
  ORA-06512: at line 28
  
  Grateful if someone can share something about it.
  
  Database server
  ----------------------------------------
  RDBMS: 10.2.0.2.0
  Oracle Applications: 11.5.10.2
  
  Thank you very much

  The responsibility of a forms? If so, MOS Doc 555580.1 ("Oraclenavigate.Menubypass was not found" error on Login after CPU Oct 2007) may be relevant

  Srini

• Page can not be displayed (11i applications) using the public IP address

  Hello
  
  I can't display the login page in our applications 11i using public IP.
  But on the local network, the connection is fine.
  
  This is the Apache logs and newspapers Jserv to my public IP error.
  
  http://rapidshare.com/files/371133255/Apache_logs.rar.html
  
  I hope you can help me how to trace debug my mistake.
  
  
  Thank you very much

  Hello

  where can I find the access_log?

  Apache logs can be found at:

  $IAS_ORACLE_HOME/Apache/logs/Apache
  $IAS_ORACLE_HOME / / Apache Jserv/logs
  $IAS_ORACLE_HOME/Apache/Jserv/newspapers/jvm

  Kind regards
  Hussein

• I have hp laptop with built in webcam I went to Device Manager and it not on a day it is next day it not

  I have hp laptop with built in webcam I went to Device Manager and it not on a day it is next day it not

  Hello

  ·         What is the brand and model of your laptop?

  Method 1:

  Try running the fixit from the link next and if it helps: http://support.microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  Try to update the drivers for your webcam and check if it helps: http://windows.microsoft.com/en-us/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly

• internal card reader must be disabled and then enabled in before Device Manager it will not work properly.

  Whenever I start my computer, my internal card reader must be disabled and then enabled in before Device Manager it will not work properly. I put an SD card in there and auto does not work. I check my computer and it shows that it is there, but when I double click on it to open it I get a message saying: Please insert the SD card. When I go to Device Manager and disable and enable fine orks. I tried different cards, but it makes no difference.
  I installed a different card reader, but another did the same thing. This leads me to think it's a matter of Windows.
  I tried to do a repair install, but it ends and said that the upgrade has failed?
  Anyone have any ideas on how to solve this problem.

  I am running Windows 7 Pro 64-bit. It is a Renesas controller and I use the 2.1.28.0 with firmware driver 4015.

  I'm not sure but I may have found the problem. I see where a guy here was having a similar problem and it was caused by Acronis. I recently installed Acronis 2012. I have been lucky to uninstall, but I will update this post when I do.  He was also running windows 7-64 bit on a motherboard ASUS!

  Acronis was the problem.  I uninstalled Acronis and now my card reader works as it should.  Strange!

• virus wiped out my audio device can not find device manager on computer not where

  virus wiped out my audio device... cannot find device manager on computer anywhere... all said that it works correctly

  Hello

  Please go to the Microsoft Community Forums.
  Because the question is not clear, please answer these questions, which will help us to help you best.
   
  1. you are unable to find the audio device in Device Manager?
  2. are you unable to access the device on the computer Manager?
  3. What do you exactly mean by "everything that says it's working properly"
  4. do you get an error message?

  Method 1:
  I suggest you to download and run Microsoft Safety Scanner and check if it helps:

  Reference:
  http://www.Microsoft.com/security/scanner/en-us/sysreq.aspx
  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
   
  Method 2:
  Check out the link and follow the steps in the article:
  No sound in Windows
  http://Windows.Microsoft.com/en-in/Windows/no-sound-help#no-sound=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
   
  If the problem persists, please write to us with the answers to the questions above so that we can better help you.

• Re: Satellite P300D-20U - I can not install display driver for Win XP

  Hi all!

  I bought the laptop P300D-20U, I installed windows XP on it.
  But now I can not install the driver to display on it.

  I downloaded from this site (it's the only display driver for this laptop).
  When I install and restart, Catalyst Control Center to write me that it do not display driver support and don't launch.
  Windows loads in resolution 640 x 480 and 4-bit color.

  When I'm changing resolution or color apears black screen and nothing happens, in 20 sec it cancels.
  I tried different drivers from ati.com but nothing works :(

  SRY for my English but I hope that you will help me guys, ty

  Hello

  Satellite P300D-20U belongs to the PSPDCE series and I think that it was equipped with the chip graphics ATI Mobility Radeon HD 3470 (M82XT).

  Did you choose this series in the form of European driver of Toshiba?

  I see the Display Driver for Win XP v 8.477.

  If you can not install using the setup.exe, then you should try to install this driver in Device Manager.
  Mark (possibly marked with yellow exclamation) graphics card then choose put up-to-date driver, use the Advanced installation procedure, point to the driver files downloaded from the Toshiba page and apply.

  It should work

• Can not install display on Satellite L500D-14W driver

  Hey,.

  I have a big problem with the display driver. I reinstalled Windows now I can not install the Toshiba or any other updated the driver. I can't use the old display resolution 1366 x 768, only 1024 x 768.

  The Windows Device Manager shows only Standard VGA graphics card

  I tried so many ways to solve this problem.

  > I tried so many ways to solve this problem.
  What means?
  What version of Windows do you use?

  As far as I know that Toshiba offers drivers tested for all supported operating systems so I put t understand your problem.
  According to specification for laptop, your laptop comes with preinstalled WIN7 64-bit HOME PREMIUM & 32 bit DVD. Why you n t use one of these original images of recovery?

• CD/DVD drive no appears in Device Manager and is not opening?

  Hi when I click to open my DVD/CD drive it does not open upward. Or it appears in Device Manager. I unplugged and plugged in I tried to use microsoft fix it. Nothing worked for me.

  Photo of him, not in Device Manager:
  http://i397.Photobucket.com/albums/PP56/nirvanaking95/dvdcddrivenotworking.jpg
  I JUST INSTALL WINDOWS VISTA SINCE WINDOWS 2000 IT HAS WORKED VERY WELL ON THE 2000!

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• Failure of the system including Device Manager empty and not his C-media after you install Advance system care 9

  My Device Manager does not display anything more after that I installed Advance system care 9 and my C-media sound does not work in the well. I am running Windows 7 essential and I checked on the net. for updates to day, but nothing is working. Can anyone help?

  You don't need Advance care system 9 because it can cause unwanted problems and minimal benefits. I would like to delete it.

  Select the hotkey Windows key + R, type Appwiz.cpl and press ENTER . Place the cursor on Advance care system 9, right click and select Uninstall from the menu drop down. Restart your computer.

• home page will not be displayed

  I downloaded firefox 12 now, it will not be displayed when I try to open that a page with lots of info but no home page

  One possible cause is security software (firewall, antivirus) that prevents or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls
  • https://support.Mozilla.org/KB/websites+look+wrong
  • https://support.Mozilla.org/KB/Firefox+cannot+load+websites+but+other+programs+can

• Tecra S3 - cannot access the configuration of the BIOS 2 Page / can not peripheral chance to start

  Hello!

  I just bought a laptop Tecra S3 from ebay.
  I turned it on a TI said "NTLDR is missing". Good I thing the guy who sold it has erased its data from the hard drive, no problem I'll install a new Windows XP.
  But... now the problem.
  When the laptop iss merchandising, I hold down the 'ESC' key, then press 'F1' for the BIOS.
  Everything is fine.
  But I can not go on the Page 2 of the BIOS. PGUP/PGDOWN has failed. I also tried with an external keyboard.
  I read that the manual (PDF) that says "Hit F12 to go to the Bootdevice selection."
  But that din't work.
  At the start of the laptop it does show that for a second half the Toshiba screen, even when I hit F12.

  What can I do to make the laptop CD/DVD boot? Or how can I enter the bootscreen or BIOS Page 2?

  Greetings from the Germany,
  Holger

  Start your laptop and press F12 to get into the boot menu.
  Has chosen the CD/DVD drive and press ENTER.

  Optical drive will serve as first boot device.

  You can also try with the C key.

  Place the bootable disk in the disk drive, start your laptop and press the C key several times. This will force it's STRANGE to be the first boot device.

• Why is unknown in the device manager that will not disappear with the update disc

  Its been two weeks preparing the motherboard as possible for the repair of the BONE, but there is now an unknown in device Mangr which did not exist before that I was doing all the Driver Update with the drive to the motherboard. Will be also someone please tell me why a CD with drivers for ASUS and motherboard support options change to a file only as reading support only, but it was like an installation disk? I mean he had the factor graph and as multi-format, now it gives just files and are not a pleasure drive anymore? Can I change it back? What happened to him? I did try and she put the BIOS on diskette for a flash for a one-way effort, but it has not worked for me! I messed up the CD? I don't see how?

  Hello

  • This "graphic factor" are you referring?
   
  You can check this link:
   
  How to troubleshoot unknown devices listed in Device Manager in Windows XP
   
  http://support.Microsoft.com/kb/314464
  

• My Device Manager page is empty

  Don't forget: this is a public forum so never post such private information by e-mail or phone, no Ubers!

  Ideas: I am running XP Professional 2002. Device Manager box is empty when it is open. How can I register my hardware devices please?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Don't forget: this is a public forum so never post such private information by e-mail or phone, no Ubers!

  Ideas: I am running XP Professional 2002. Device Manager box is empty when it is open. How can I register my hardware devices please?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Which service pack do you have?

  This problem occurred just after that you installed the sp3? If so, have you thought about disable your antivirus application while sp3 has been installed?

  First, follow the directions here: http://support.microsoft.com/kb/311504

  If this does not help, use method 2 here: http://helpdeskgeek.com/windows-xp-tips/device-manager-empty-or-blank/