Page Web VERY slow to load

Similar Questions

• LDAP authentication integrated and now BAM start page is very slow to load

  Hi, all ~
  
  I have a new installation of BAM with the 10.1.3.4 10.1.3.3 applied patch.
  
  I went through the installation of BAM and the note of LDAP integration technique guide and have been able to successfully integrate BAM with our LDAP, where "successful" means that I am able to provide my own LDAP credentials and connect to BAM.
  
  However, BAM splash screen now always somewhere takes on the order of 1-2 minutes to load... so I guess I am wondering if there is a common cause for this kind of mistake?
  
  Suggestions for things to check would be appreciated.
  
  Thank you
  
  -Nathan

  For what it's worth, the solution in our case was to separate the BAM (10g) of LDAP.

  User administration becomes a little more manual process in this case, but BAM pages to load almost instantly to users now, while prior to some users, should be as much as 10 minutes for a page to load as a result of their record in.

  Another advantage of the decoupling of LDAP is that IIS is able to make the connection integrated Windows for users, which means that users must provide a login and a password longer.

  The "witch hunt" that was encountered had to do with IIS kingdoms and create connections to the BAM server after the decoupling in JDeveloper. In our tests, under IIS-> Web Sites-> default Web Site-> properties-> Directory Security (tab)-> "authentication and access control" Edit button, the following must be specified:
  Check only "Login Windows integrated" and "Basic authentication".
  Specify a field 'default' by pressing the selection button and choosing an appropriate area
  From there, your JDeveloper BAM connection, be sure to include the domain selected in the properties of your connection.

  -Nathan

• 12 Firefox is very slow to load pages and if two tabs are open, it lag.

  12 Firefox is very slow to load pages and if two tabs are open, it lag. I've tried everything (e.g. virus, Defrag, I created a new profile in "run", etc.). I had my router/line checked everything etc and after 2 weeks of cleaning/testing etc its all pointing to Firefox as the problem. Please help because it's driving crazy me.

  
  

• I'm runinng Windows XP Home Edition 5.1 Service Pack 3 but my computer is very slow when loading files could you tell me about the software to speed things up please

  My computer is very slow runinng when I'm checking my Email and sorting out when I delete the emails I don't want it seems to take more than five minutes to remove as it is very slow to load web pages from the Internet

  HI Bob,

  Unless you use MSE and think the problem is caused by malware (which is possible, but not very likely given the much more likely reasons - however, if this is the case, after return and we will be happy to provide instructions on how to clean your system and check that this has been done correctly and completely) please repost it here for help on this issue: http://answers.microsoft.com/en-us/windows/forum/windows_xp-performance?page=1&tab=all&tm=1300700638376 where experts in the field are better qualified to help you.

  Good luck!

• Satellite L850 1LK very slow to load images

  Ive had this machine for almost 3 years, it was fine for the first two, but now that it does become a chore.
  I only really ever use it to surf the internet and upload pictures and its main problem is the use of the internet.
  Images and web pages are extremely slow to load even on a good fast wired connection. Ive had the computer restored by a local store who claimed they reset the map graphic, but in reality they probably just restored to the factory under the toshiba bloatware.
  It worked fine for 2 days, then became slow again, im glad this is not a virus or malware related problem.
  Just wondering realistic if we can do something with it, or is it better to forget everything and move on to something new.
  Its been updated level to windows 10, but the problem existed on 8 too.
  Thanks in advance.

  Try an update of Windows to reinstall Windows.
  Pilots precedents or browser plugins can be the cause of the problem

• DIAdem v11.1 SEEN very slow to load pan and zoom 2D graphics axis

  As for the user KJ2, I find DIAdem version 2011 very slow when loading the data in the display.

  I have two laptops, a DIAdem 2010 operating and the other the new 2011. IAM loading the same PDM file into two versions.

  The 2010 takes more time initially to load the data in the browser window, but it is almost instant when zoom and pan in the display window.

  Load the file instantly in the browser of the 2011, but then takes an age to zoom and pan, which is very frustrating when the analysis of the data.

  I can improve performance at the 2010 level if I load the data with an interval of small applied reduction (factor 2) - once again, it takes much more time to load in the browser window, but is now usable in the view window.

  The only problem now is that all channels are renamed with the Appendix "sample".

  I guess that's a result of the new feature 'optimised loading data' which I guess is only load the data when I need IE when zooming and panning in the display!

  Help please, before I resort to re - install 2010!

  Karoline

  Hello Albert,.

  It is a relatively easy solution:

  In the BROWSER, go to the menu "settings":

  

  In the dialog box that is displayed, change the setting of data "always load in bulk.

  

  Alternatively, you can also change this in the dialogue box "parameters: compatibility", but I don't know what is the difference between these two methods.

  Hope that helps, no need to return to the 2010 version after these changes. Oh and don't forget to save your configuration file after making the changes to make them permanent!

  Otmar

• Homegroup is very slow. Loading files from another computer is very long and I can't watch movies on the wireless using the homegroup.

  Group residential slow and other problems with it

  Hello!

  I have 3 Windows 7 PC-s (office #1, #2 desktop and laptop). I created HomeGroup and join all computers, so I can access the files on each of them. But my problem is the following: homegroup is very slow. Loading files from another computer is very long and I can't watch movies on the wireless using homegroup, because it is slow and every two seconds of loading film. And also needed a few minutes to open the pictures (more than 10 GB in all folders) to a folder in the other PC. Why is this work so slow? I don't think there is a problem with slow wireless router, because I can replace my old Linksys WRT54GL Linksys E4200, which is able to transfer video HD 3D such as Linksys provide. What should I do to fix this? Should I change all the settings in Windows, perhaps in the router...?

  And why my laptop is not always visible to the other PC to homegroup? He see two others and two other sees, but they are not portable. This happens sometimes. But then I still share with homegroup libraries to my laptop and there still other computers see it and all shared libraries. Where is the problem? I also try to change the HomeGroup services automatically, but this does not solve the problem.

  If I forgot something to write, or you need more information, do not hesitate to ask.

  I'd appreciate any help really.

  Hello

  Manually check manufacturers sites WiFi because pilots offered through
  Updates Windows will most often not be later (MS is far behind certifying)
  drivers and many manufacturers do not quickly submit newer versions or not at all). See
  Manual driver update of the methods below.

  The question could be WiFi in fact however try to device (hardware)
  update the driver first.

  What antivirus/security is used? Some of those who will cause problems with the
  Homegroup. Since it happens more often on a single computer that on there
  a check.

  From this link:

  Homegroup: frequently asked questions (also shows how delete and remove homegroup)
  http://Windows.Microsoft.com/en-us/Windows7/HomeGroup-frequently-asked-questions

  "Only people who belong to the homegroup can see shared libraries. You can also share libraries or files and individual folders with specific people in your homegroup, rather than share them with everyone. For more information, see libraries with your homegroup sharing and keep files and folders to be shared with a specific residential group. »

  Share files with anyone
  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  ==================

  How to upgrade manually the drivers:

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods
  below is preferred so that the latest drivers from the manufacturer of system and device manufacturers are
  found)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version.
  (Those become your fonts of rescue system manufacturer).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as windows
  7 love the updated drivers.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Very slow to load on a Windows Server 2012R2 PowerCLI

  Hi all

  PowerCLI 5.5 is very slow to load on my Windows 2012R2 server, I did a few tests

  Test 1 - load the snap of PS on my worstation (8.1 for Windows 64-bit - SATA hard drive)

  PS C:\Users\MyUser > Measure-Command {Add-PSSnapin vmware.vimautomation.core}

  Days: 0

  Hours: 0

  Minutes: 0

  Seconds: 1

  Milliseconds: 871

  Ticks: 18717065

  TotalDays: 2.16632696759259E - 05

  TotalHours: 0.000519918472222222

  TotalMinutes: 0.0311951083333333

  TotalSeconds: 1.8717065

  TotalMilliseconds: 1871.7065

  Test 2 - snap of PS of load on a 2012R2 Windows Server not connected to the internet, check on CRL

  PS C:\Users\MyUser > Measure-Command {Add-PSSnapin vmware.vimautomation.core}

  Days: 0

  Hours: 0

  Minutes: 0

  Seconds: 51

  Milliseconds: 603

  Ticks: 516030768

  TotalDays: 0.000597257833333333

  TotalHours: 0.014334188

  TotalMinutes: 0.86005128

  TotalSeconds: 51.6030768

  TotalMilliseconds: 51603.0768

  
  

  
  Test 3 - support software component PS plug-in on a Windows Server 2012R2 not connected to the internet, check CRL disabled

  PS C:\Windows\system32 > Measure-Command {Add-PSSnapin vmware.vimautomation.core}

  Days: 0

  Hours: 0

  Minutes: 0

  Seconds: 16

  Milliseconds: 323

  Ticks: 163238507

  TotalDays: 0.000188933457175926

  TotalHours: 0.00453440297222222

  TotalMinutes: 0.272064178333333

  TotalSeconds: 16.3238507

  TotalMilliseconds: 16323.8507

  As you can see there is an improvement when I disable CRL checking in accordance with this article: http://blogs.vmware.com/PowerCLI/2010/01/troubleshooting-slow-startup-with-powercli-40-u1.html

  But I still have 16 seconds to load the snap against 1 second on my workstation (which has much less computer resources!)

  Any help is appreciated.

  Hi LucD,

  I've found a workaround:

  When I run the import-PSSnapin I noticed (with wireshark) a lot of traffic failed to WAN addresses, so I set myself, in Internet Options a false proxy (127.0.0.1), excluding the proxy DNS of my domain active directory name (so I can connect to the virtual center without going through the wrong proxy)

  Now is the time of execution:

  Windows PowerShell

  Copyright (C) 2013 Microsoft Corporation. All rights reserved.

  PS C:\Users\MyUser > Measure-Command {Add-PSSnapin vmware.vimautomation.core}

  Days: 0

  Hours: 0

  Minutes: 0

  Seconds: 2

  Milliseconds: 774

  Ticks: 27745259

  TotalDays: 3.2112568287037E - 05

  TotalHours: 0.000770701638888889

  TotalMinutes: 0.0462420983333333

  TotalSeconds: 2.7745259

  TotalMilliseconds: 2774.5259

  Not bad! Execution time lowered 16 sec at 2.8 sec

• PS CC 2014 very slow to load and function after update 2014.2

  I've updated my Photoshop CC 2014 64-bit today.  It worked perfectly until the update.  Since the update, PSCC 2014 has been very, very slow to load and slow in use.  I uninstalled used PS PS cleaner and reinstalled via the CC Office.  The problem of the speed remains.  Interestingly, the 3D is the functions Menu which seems to take longer to load.  In other words, see the program load, possibly, but 3D 6 or 7 seconds later.  I don't know if it's important.  The installation worked fine the update.

  Grateful for any ideas on what could be the problem and what I can do about it.

  My system is a 3770 K, with 32 GB of ram, x 4 SSD that dedicated to the OS, programs and other data and an Asus GTX660 (2 GB) graphics card.  I use the latest version of the driver from the Nvidia website.  OS is Windows 7 64 bit.

  I get no error message - slow all just great.

  Thank you.

  Right.  I've been tracking, with the help of the Forum of Kaspersky, KIS 15.0.1.415 file.   It seems the problem of lag with CC2014.2.

  You can find it here:

  http://USA.Kaspersky.com/downloads/software-upgrades/

• Very slow Firefox loading pages

  So many pages are really slow loading as minute, as Courier hot.EE youtube and many more. It started to happen when I updated to 20.0. Looked up a few suggestions and found that everything: config network.http.keep - alive using fake. And so I did and it worked, but the next time I opened firefox again, that it was slow to load again, but persistent is always false, all non disabled necessary plugins and extensions and I don't seem to find a solution. Been a user of firefox for a long time and do not want to change my browser.

  The new profile seems to work very well - don't know for how long, but we'll see how that goes.

• my Macbook Pro Very Slow error loading, error, Trackpad trolling Kernel_task bar

  HY sorry my bad English...

  I searched google but couldn't find a solution... I use macbook pro 2011 13 inch 2, 4 GHz core i5 standard end

  Why my macbook pro late the trackpad, kernel task error and loading very slow bar sttartup, but this problem is not in safe mode, with all the normal safe mode

  measures have I made:

  -change the hard drive

  -change the disk sata hard

  -battery change

  -change the trackpad and trackpad cable

  -change the OS 10.6, 10.7 10.10, 10.11

  -change model point via

  and unresolved problen my macbook very very slow loading bar (it also occurred when I first started by flashdisk and in Setup mode in ulities OSX as a kernel error task late trackpad) sometimes the trunk sometimes will not start and if I change the SID model that works, but when booting from flash for a long time

  is there a solution that is more useful? very confused i

  0o0o

  If it doesn't happen in Mode safe, there is probably a software problem. Can you post an Etrecheck report? http://etrecheck.com/

• Logic 10.2.1 very slow to load aus with yosemite

  I use OS X 10.10.5

  I upgraded to logic 10. 2.1 last night

  very slow to plugins to the boy up to a point where it is, in my view, unusable in the workplace

  to be completely sure that I loaded Logic 10.2

  loading time at the was satisfactory

  Too bad the new update is very nice

  to support the upgrade at this time

  No problems or slowdowns with loading THE slot 10.2.1 and 10.10.5 on all three of my workbed of platforms here... so I suspect that you have either a file/permissions related question or a plugin wrapper like... installed 32lives plugin that is causing the slowdown

  Check your logs (OS X Finder > Applications > utilities > Console) to help identify the cause...

• Acrobat Pro XI Java: Removal of Page is very slow

  Hello world

  Here is a set of code that I had working in Acrobat XI to pull up a popup window which, when the user selects Yes, is able to search a keyword hidden on some pages in the PDF file and then delete the corresponding pages.  It works, but the problem is that it takes almost a minute to treat.  I'd love to someone entered for what might slow the process down.  I am very new to Java specific suggestions would be greatly appreciated!

  Thank you in advance,

  Christian

  CMSG var = "continues with the current action will delete the TASKS application and its data."  This may take a few minutes to complete. « ;

  CMSG += ' \n\nDo you want to continue?

  var nRtn = app.alert (GSMC, 2, 2, 'Question Alert Box');

  if(nRtn == 4)

  {/ / A yes answer}

  Code to do the thing you can do on a Yes

  Console.println ("the answer is Yes");

  for (var p = this.numPages - 1; p > 0; p--) {}

  for (var n = 0; n < this.getPageNumWords (p); n ++) {}

  If (this.getPageNthWord (p, n) == 'CHESDELETE') {}

  this.deletePages (p);

  break;

  }

  }

  }

  }

  Another yew (nRtn is 3)

  {//No response

  Console.println ("the answer is no");

  }

  on the other

  {//Unknown response

  Console.println ("the response was something other than yes/no:"+ nRtn ");

  }

  Hello world

  After review of this topic, I realized a solution.  So I hope that someone in my situation can benefit in the future!

  * A brief summary, I had an interactive PDF application where multiple pages are "generated" when some options (check boxes) are selected.  When the items are deselected, I needed a way to get these pages on the document.  Research of the approach of the nth Word worked, but it is become very slow, especially as the PDF has grown larger.  The approach below you will remove the pages having engineered very quickly a document based on a button/field value and can be adjusted accordingly.

  As follows:

  1. Somewhere in the document (not on the template, unless you make sure that the domain names are static when created) create a field text and format to store the numbers with decimal places to zero .  It's your container (so, for example, I named it CHES container).
  2. Then go into the model that needs to be created at a later date. In the page toolbar, right click on your model page and go to properties > Actions
  3. For select trigger, choose "Open Page"; For select Action, choose "Run a Java Script"
  4. Paste and modify the following script:

  -----------------------------------------

  var p = this.pageNum;

  Console.println (p);

  this.getField("CHES_Container").value = p;

  -----------------------------------------

  5. This action will say your model page, when, created to identify its own page number and place it in the "container", which once again, for me, is called "CHES container.

  NOTE: Check to be sure your container shows a number, and that it is accurate.  Later, you can hide this field, but for now, it is useful to find errors that may occur.

  6. click OK and click on the button (checkbox etc.) that will trigger the removal of these specific pages.

  7. go in field properties > Actions.  For select trigger choose "Mouse Up"; For select Action, choose "Run a Java Script"

  8 paste and modify the following script:

  -----------------------------------------

  var p = this.getField("CHES_Container").value;

  this.deletePages ({start: p, nEnd: p + 2});

  -----------------------------------------

  NOTE: nEnd: p + 2 adds just 2 pages to the start range.  So just change accordingly based upon the number of pages given birth there are requiring deletion.

  As a tip, my relaxation complete box script was:

  -----------------------------------------

  Var SHEETS = this.getField ("CHES Check");

  var CHES1 = this.getTemplate ("CHES Pg1");

  var CHES2 = this.getTemplate ("CHES Pg2");

  var CHES3 = this.getTemplate ("CHES Pg3");

  var p = this.getField("CHES_Container").value;

  If (ches. Value is "Yes")

  {

  CHES1. Spawn();

  CHES2. Spawn();

  CHES3. Spawn();

  }

  on the other

  {

  this.deletePages ({start: p, nEnd: p + 2});

  }

  -----------------------------------------

  Please let me know if I missed something or if you have any questions!  Thanks again to everyone for your feedback and patience.

• Pages Web take long to load

  Hello!

  I am designing a website with Muse and no page that take forever to load: 50 seconds!

  These pages contain many areas of text.

  How could I do to make it faster?

  Could make these pages loaded have been loaded "behind" so hidden?

  An ingenious idea?

  Thank you very much!

  It loads very fast on this side. Maybe that's a problem with your local connection. It seems not very media heavy.

• VERY slow to load-Forum

  Is anyone having problems with this forum being slow to load pages? Yesterday and today, it was EXTREMELY, OUTRAGEOUSLY slow. Nothing else seems to be, but I don't know if it's me or the site... I'm just the developer report working in detriment IT... you kind of network are wizards. Thanks to relieve my frustration of let me know one way or another.

  I have not noticed anything today, works perfectly.