Qosmio G10: Breaking news - good news for the capture!

Similar Questions

• Can anyone suggest a good diet for the HP p6214y

  I get upgraded my HP P6214y with a new GTX 460 graphics card and I need to know a good diet for the card.

  Can anyone suggest any good? I'm looking for 550w and more. Money is not a problem.

  Karen,

  The Corsair VX 550 will work as the Corsair HX 650.  I have the Corsair HX 650 and the NVIDIA GTX 460.

  How to replace a power supply.

  How to replace a video card.

  These "how-to" HP articles should be useful.

• Good start for the virtualization server?

  Hello

  I would like some advice on a good start for the virtualization server. I would like to run the more recent, free of VMware ESXi 4.1 edition (vSphere Hypervisor?) on the supported hardware (where the RAID can be monitored with VMware).

  For example, something like this: http://www.Dustin.se/pd_5010442452.aspx

  I guess the 8 cores on the server above is a better choice than faster Intel 4 processor (as each VM gets a dedicated core?).

  Any input/advice/server suggestions are welcome!

  Thanks in advance!

  Bolgard wrote:

  OK, so if I understand you is good, I could install VMware ESXi 4.1 on a USB key inserted at the back of the R210 server, and I would have a facility "embedded"?

  No, not really. "Embedded" means the purchase of a server preconfigured with ESXi hardware already installed by a few big name of the seller. "ESXi Installable" means that you install ESXi yourself a CD, and it could be placed on a number of devices supported, including USB. It will always be "ESXi installable" However, if it has nothing to do where actually install you it.

• Qosmio G10 begins with vertical lines on the screen

  Hello, can anyone help?

  When I try to start my sign qosmio G10 comes on with vertical lines on the screen. And the screen goes black and I can only hear the fan.
  In VGA mode, it begins upward, but always with the lines on the screen.
  Is there something wrong with the video card? In my view, that there are more people with this problem.
  Toshiba offered little help?

  I'm 'out out of warranty '. I need to by a new complete motherboard or y at - it another option? Replace the video card?

  Hello

  Its a shame about the warranty because you ask the service partner Toshiba for the verification of the laptop and this procedure would be free. You know, the warranty would cover the audit of the laptop.

  But I would say the external display connection and then you can check if the same vertical lines appear on the external display.
  If you see the lines on the second monitor, then I guess it could be something wrong with the graphics card or motherboard.

  I think that this procedure is the best way to find out what could be the problem, but anyway, I think you should ask a technician for assistance if you want to solve this problem.

  PS: Have you tried to reinstall or update the graphics driver? I think you should do it but I don't know if it will help you, but you know Mr. try is free ;)

  One of my friends had a similar problem with the vertical lines on other mobile manufacturing, and it was a WLan cable which was responsible for the strange lines on the screen.

• Qosmio G10-100 - need sound driver for Windows 7

  Please please please can someone help I have spend hours and hours installation charges unlike drivers and none work. I even tried to install DriveRobot and who installed a 97 RealTec but does not work.

  I need a driver for Windows 7 sounds for a G10 100, I'm sure that there is someone out there who has the same problems. Please note that when I go to the audio device it appears and no audio drivers not installed even though I have install Realtex ones.

  I'm sure that the generation of the sound card in the lappy is a SoundMax

  Live in hope

  Greg

  Hello

  You should check for drivers

  For European models

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  For Canadians or something like this:

  http://www.CSD.Toshiba.com/

  For the Australian and New Zealand:

  http://www.Toshiba.com.au/

• Qosmio F30: Driver WDM Video IN for the VfW capture?

  Someone Toshiba read these forums?

  Is there any hope that Toshiba can rewrite the pilot for the composite 'Video IN' material so that it works correctly under Windows and Video For Windows driver model so that it can be used with Windows Media Encoder, please?

  I bought this F30 on the basis, he had a built-in video port, but to my horror it won't work with Windows Media Encoder. I also read on these forums that other people have problems getting the 'video' in port to work with based video capture programs.

  For such a machine, surely the 'in video' should function as a good piece of hardware VfW.

  Can't wait to hear the answer.
  Tim.

  Hi Tim

  I put t believe that some technicians Toshiba will read this because this is a user forum. In any case, I did some experiments with Qosmio G20 and composite in the port. I tested with VCR VHS and Sam receiver.

  I noticed that on some applications of external devices are not recognized as a video source. I also tested my camcorder with firewire port and it works perfectly with each video editing applications.

  What video source you want to use?

• Qosmio G10: Scanner uninstall problems - cannot load the external DLL

  I tried to uninstall an old scanner HP my Qosmio G10 and received the message - internal error unable to load or call external DLL, please contact you provider for more information. If I could use the product to restore disc and all saved this would restore the system to the way I bought it or are ther programs on the CD-ROM tools & utilities.

  I am a novice at this so any help is appreciated. Thank you emdpar

  HI Michael,

  You can certainly use the recovery of the product CD to re - install your system to its original state, but this seems a little extreme just to remove an old hardware device to your configuration. You should not need to use the tools and utilities disk unless it contains items that are not in the recovered system.

  I assume the error with the uninstall wizard is because only the original installation used a product CD that cam with scanner HP and the missing DLL is on this CD.

  Kind regards

• How to make a good UI for the selection of the channels with DAQmx

  A lot of my Labview programming accompanied verisons them previous LabVIEW (pre Labview 7), and there are a ton of new features I am digesting (currently using Labview 8.2).

  My question is (in general), how people schedule their user interface for the selection of channels and others when using hardware DAQmx?  What I have in mind is a system compacDAQ with a number of modules.  The user would be able to choose which channels to watch.  With the help of MAX as part of this process seems counter intuative and somewhat static (yes I know you can change out there, but it feels more like something you would use for something that doesn't really change much).  I wish that all the UI within the VI.

  Programmers use the task of creating screw for this or something else?

  Thanks in advance.

  ChuckNRC,

  I tend to avoid using MAX and create all my channels/tasks using the DAQmx functions.  There are also having some DAQmx features that allow you to save/remove channels, tasks and scales to MAX.

• Good candidate for the clone?

  I have an installation (Windows 7) VM compatibility with all installing the software already and that's exactly how I want it now my question is that I have an accountant who uses old XP VM and more. Can I just clone the current windows 7 VM and assign a different IP address? I know I can set it up and create a new SID so I'm not worried for the clone, but seems to be the right choice. Nothing wrong with that?

  No downside. Go ahead and clone that & make configuration appropriate (SID/IP, etc.)

• Qosmio G10-122: I can't find the Qosmio player

  I buy the qosmio g10-122, but I can't find the Qosmio player in Notepad.
  I need this software and I will download this Internet but I'm not sure this could work whith my laptop.

  Hi Adriano.

  Have you checked all the stuff that was delivered with your Qosmio? There the Qosmio player installation CD?

  QOSMIO player is already preinstalled on your laptop on a hidden partition. Check the user manual. There is a detailed description how it works exactly.

• Qosmio G40 - second HDD not visible for the facilities WXP CD

  Hello

  I tried to install Windows XP Home edition on the second hard disk on G40 (by booting from the installation CD), but windows Windows XP Home edition Setup did not find any hard disk?

  I don't have the drivers for the hard disk with laptop. Where to find it?
  Thank you.

  Antonio

  Hello

  A question: have you installed the Intel Matrix Storage Manager Manager?
  Please note that this IMSM is needed to install the Vista or XP on the laptop.

  The package of Robson (including the IMSM) for Vista was published on the Toshiba page.
  If you need the IMSM for XP please download from the Intel site and install it by pressing the F6 key during the installation procedure.
  To install this driver, you will need an external USB FDD drive!

  Good bye

• Qosmio F20-149: need a cord for the United Kingdom?

  Hey guys,.

  I am looking for a power cord, taken UK, compatible with my F20-. 149.
  For the moment, I have a euro plug, but I need a UK plug.

  Does anyone know if there is a power cord for the F20?
  I have not found one in online stores.

  Thank you

  Christian

  Hello

  PA2521E-2AC3 is a s Toshiba that adapters can be used all over the world with the appropriate AC outlet adapter universal sector.

  I think that the appropriate mains adapter may be purchased from your local authorized service center city or provider some electronics dealers. You can also consult offers online on the internet.

  Maybe you could use something like this:
  http://www.powerconnections.co.UK/convert_eurotouk_fcp.htm

  Good bye

• Are there examples of good code for the display of the preview in the window images?

  I can understand more about the use of folio. xxx, but can not find good examples to use for the preview images.  () Folio.getPreviewImage I tried without success.  Oh, I should mention that it is version 2.  Many examples for version 1.

  Maybe if I get a little more specific.

  I call upward folios through:

  {adobeDPS.libraryService.folioMap.addedSignal.add (function (folios)}

  for (var i = 0; i < folios.length; i ++) {}

  addFolio (folios [i]);

  }

  (}, this);

  Finally, it works in a function where I am collecting and folio data display:

  var productId = folio.productId;

  var html = ' < div id = "" "+ productId +" ">" "

  HTML += ' < a href = "#" > < img class = "shadow" width = "120" src ="border = 0 / > < /a >."

  HTML += ' < br / > < span class = "bold" > ' + folio.title + ' </span > ';

  HTML += ' < / div > "

  it. $el = $(html);

  Folio.title works very well pull up the title, but I can't use folio.getPreviewURL in v2.  Should what code I use to set the src to the preview image?

  Thank you

  Have you looked at the default implementations of the library?

  Based on rendering of FolioItemView, there is a function (follow nested functions!):

  setTimeout (function () { scope. loadPreviewImage()}, 100);

  He referred to this feature (it does not copy):

  	loadPreviewImage: function() {}
  		If {(this.el.parentElement)
  			transaction = this.folio.getPreviewImage var (135, 180, true);
  			transaction.completedSignal.addOnce(this. getPreviewImageHandler, ce);
  		}
  	},

  Go deeper in the getPreviewImageHandler function is where you see the url value...

  If (transaction.state == adobeDPS.transactionManager.transactionStates.FINISHED & transaction.previewImageURL! = null) {}

  it. $el.find (".folio-inch") .attr ("src", transaction.previewImageURL);

  Is also in the code example to provide a preview when the Adobe API is not available:

  (In the service of rendering)

  var json = this.model.toJSON ();

  $folioThumb.attr ("src", json.libraryPreviewUrl);

  If you make any changes to the location of the preview display, you can just replace the class ".folio-inch" to what the class (or id) is the element that you are wanting to render the preview in.

• good resources for the library client adf?

  Hello
  
  Someone suggest me pls good material on the use of the client library ADF and groovy expressions.
  
  Thank you.
  
  Kind regards
  K.Satish.

  You talk about the ADF javascript api: http://download.oracle.com/otn_hosted_doc/jdeveloper/11gdemos/adf-insider-javascript/adf-insider-javascript.html
  http://www.Oracle.com/technetwork/developer-tools/jdev/1-2011-JavaScript-302460.PDF
  and the reference http://docs.oracle.com/cd/E28389_01/apirefs.1111/e12046/overview-summary.html

  Timo

• Good way for the centering of the effects in "Fly"?

  Hi all

  I'm trying to center the text in a caption section. Both fly in different areas of the stage. Is there a quick way to make sure they end up centered? So far I have snorkel it until I get the two elements centered, a painful process? Advice on how to do it quickly? Thank you

  Dan

  Or you can change the XML code for the effect. or use the workflow that I use: create a target with a vertical and a horizontal line that you can position exactly using the accordion to Transform. And then put the end point of the path in this cross.

  Hope you understand my explanation... Take a look at this blog, the film of the first example, where the maps are flying to the same location, using this approach:

  http://blog.lilybiri.com/reset-effects

  Lilybiri