Pages of the printed document & portrait or landscape

Similar Questions

• OfficeJet J6480 continue to feed the blank sheets after the last page of the print document then blocks.

  When you print a document on my OfficeJet J6480, once the last page printed, the cradle of the cartridge moves back several times, then one or two white sheets feed through the printer. Sheets then another feeds and jams, requiring the duplexer to be deleted to clear the jam. This happens on 95% of the print jobs sent to the printer.

  Windows XP SP3

  Unfortunately, the troubleshooting steps a false paper jam and find a real fundamentally the same.
  I included a link to a document that is for a paper jam error. However, I'm sure you did 1st two solutions and if you please go above them, I want you to try, is the cleaning of the rollers and the duplexer and reset the products and checking the firmware to ensure that it is up-to-date. These solutions are listed in the order and you can find instructions step by step in this link for each step. Reset will be particularly important because it is one of the most effective tools to correct the problems of material with a printer. Here is the link: http://support.hp.com/us-en/document/c01312792

• I can't print the pdf files of Adobe reader 9.5.5, instead, it prints to file.creating a NDS. I can print individual pdf pages from the same document usung photo shop elements 4, but it is laborious. Help, please.

  I want to print a document that contains 20 pages. I can print individual pdf pages from the same document usung photo shop elements 4, but it is laborious. Help, please. I've updated the Adobe reader to the latest version. This fault is developed when I was at Midway through a series of 20 pages of printing documents.

  In the Advanced Print dialog box disable the entry "print to file".

• Minimizing the differences between the print document page numbers and page numbers fixed ePub format

  Hi all!

  I'm currently involved in a project of ePub format fixed relatively simple. I almost completely finished with the file, but I see for export, only the page numbers in the table of contents for navigation begin numbering at a point different than the print document.

  I certainly don't expect the software ideally know exactly where I want the numbering to start, but I was wondering: is there a way to change the starting point of the navigation table of contents so that I can select the starting point? Here's a screenshot of the situation I describe, taken on my iPad mini using iBooks. A fix for InDesign would be useful, I am very willing to modify the code. Please let me know what additional information can help.

  Thank you very much

  Jacob

  

  I don't have a good answer for you on that I've been unable to get this works as is suspected.

  The next update will include support for a list of the fixed layout pages and to my surprise that it was unsuccessful in the evolution of the Navigation table of contents page (right) numeric values that you see.

  Those who seem to come from literally the index of the XHTML file where is the target of the table of contents. If iBooks is unable to find the target it displays the entry under '... ».

  Where the list of pages seems to make a difference on the iOS7/iBooks, is when you're scouring the pages in display mode page it will display the value of the entry in the list of pages... which is now generated from the string of InDesign page number in a gray oval.

  Maybe this has changed to iOS8/iBooks or perhaps other readers it manage differently - I never had the chance to try it on other players.

  Douglas

• HP7520: How to scan 2 pages with the automatic document feeder and save to a file?

  How can I scan 2 pages with the automatic document feeder and save to a file?  (Right now, it happens that 2 separate files)

  I have a HP7520, & again, I wish scan 2 pages into a single jpeg file.

  Thank you

  Well, in general JPEG format does not support several concept as a document page. Thus, each image in the JPEG file is saved in a single file. If you are considering of reduction of 2 images in 1 paper size (example: A4), you may need some image editor to do

  If you are looking for a mulit-page image format, TIFF can be a format suitable to use.

  https://en.Wikipedia.org/wiki/TIFF

• Printer Dell 1100 printed in white when I am on the internet and I want to print any page. The printer works in the office.

  Printer Dell 1100 printed in white when I am on the internet and I want to print any page. The printer works in the office.

  I need help please

  If it is printed in white on white paper how you see it?

  Check your printers settings in his program in place.

• Print the Test Page from the printer using prnqctl.vbs

  Hello. I have a HP Deskjet D4360 printer. As is the case with the ink more cheap jet, the print heads printers dry if they idle too long, and the expensive ink cartridge will lose. This printer is connected to my computer via a USB cable and is not on the network.

  What I want to do, it's automatically print a test page to the printer once per week. I want to this by setting up a task that calls prnqctl.vbs by using the following command:

  cscript C:\Windows\System32\Printing_Admin_Scripts\en-US\prnqctl.vbs EI Pei "HP Deskjet D4300 series"

  When I run (as administrator) command prompt and run this command, I see the following result:

  Microsoft (R) Windows Script Host Version 5.8
  Copyright (C) Microsoft Corporation. All rights reserved.

  Failure Print Test Page 5 Win32 error code

  My understanding is that 'Win32 5 error Code' translates to 'access denied '. I checked the name of the printer is "HP Deskjet D4300 series", so this isn't the issue.

  For what it's worth, I use Win7 Home Premium 64-bit SP1.

  Any ideas as to what can make it work? Thanks in advance.

  Hello

  The question you posted would be better suited in the MSDN Forums. We have separate team working on these issues.  I would recommend posting your query in the MSDN Forums.

  TechNet Forum

  http://social.msdn.Microsoft.com/forums/en-us/home

  Hope this information is useful.

• Loading master page in the new document, formatting is all wrong...?

  I created a master spread that contains items on this page (color, background, footer text), and then a child masters that inherits from control, but allows you to change certain elements of text because it is a book of 400page, divided by the section and chapter.

  The child masters loading in a different document than the document master ruin with their implementation in shape.  I can't understand what is the cause.  For the first time look anyone know what could be the problem?

  Software: Adobe Indesign CS5.5

  OS: Windows 7

  Here's what they are supposed to look like:

  

  Here's what they look like when loaded into another document: (card red box has excess text & text above the blue bar is shifted to the left)

  

  Thanks for any help. Let me know if I need to specify additional information.

  Whenever a master page is reassigned substituted items are kept on the page of the master document, AND the Master object reappear in their places of origin and with the original settings. You can delete objects substituted document page, or hide them and cancel and delete new objects of masters, but you can't avoid the question.

• OfficeJet Pro 8000 prints multiple pages of the same document

  Info:

  HP Officejet Pro 8000 A809a

  Windows 7 Pro 64-bit

  Last driver and firmware from HP

  When a job is sent to the printer (web, Word, Acrobat, etc.) the printer keeps printing multiple pages of the document.  Sometimes it will print the first page and a second partial page, then it reprinted again and stop at the same place on the partial page.  She does over and over again.  I ran the HP Diagnostic Utility and it was impossible to print a test page, even after turning the power on power off, then on.   Any suggestions, or is * another * bad printer?  The first was sent and replaced, so I think that this model is just a lemon.

  Thanks for the suggestion, but it didn't work.  I tried to reinstall the driver altogether package three times with no result.  I ran the utility programs that supposedly allows you to solve problems, but public services could not even to generate a test page.

  It seems that I finally found a solution, however.  I installed an older driver for MS Vista 64-bit, and that seemed to do the trick.

• When printing a web page using Internet Explorer, the printed document is a mirror image.

  I have HP Officejet Pro L7780 and Windows 7 64-bit operating system. When I print a page of a Web site that is in PDF using Internet Explorer, the printed page is a mirror image.  If I print the same page of Firefox, the page prints fine.

  Also, I recently put my husbands computer so he could also print to this printer via the network.  When I printed an email on my printer from a computer, it is also printed as a mirror image.

  I assumed that you helped the mny users, that's why I waited long before I asked again.  Thank you.  I assigned added another printer driver using your instructions.  It worked.  I'm now able to print correctly.  Thank you!

• Photosmart HP7575 will not print pages from the automatic document feeder

  All of a sudden the printer kicks on blank pages after auto and manual scan.  What is the problem?

  No problem! I am happy to know that everything works now after performing a reset on the printer. Could you please check the 'accept as solution' on my post, if you feel that my not resolved your issue, or click ' Bravo Thumbs Up ' on the left to say thank you for helping. Have a great day!

• Printer keeps printing a test page after each print document

  I have a HP Deskjet 970Cse on Windows XP Professional with Service Pack 3.

  About 2 weeks ago, I was receiving ambiguous messages on the ink levels, for example, saying a cartridge was ink when it was not, and after checking and replacement he told me the other cartridge was bad or empty.

  I replaced the cartridges with new and error messages went. To test others, I replaced the previous game and they worked well without empty messages.

  Then one day my computer tells me it was installing the HP printer and now I got 2 copies.

  I uninstalled the drivers and printers and downloaded the last at HP (the same I was already running years) and now it prints a test page after each print job that is wasting ink. By the print job, I mean it prints a test page once all the documents in the print queue. On the rare occasions that it will print a test between each document but this page is not the standard.

  Any help would be appreciated.

  Andy, honestly with a printer is 10 years and more, the problem you are experiencing may deal with the age of the device more than anything else. You could try hard-reset of the printer (leaving it unplugged for 20 seconds), but if what you said about the button is true - it is possible that the Board of Directors is signaling the machine to print a test page after each draw by a malfunction at the hardware level.

  In this case, maybe it's time for a new printer. If you need help to choose one, there are many solids Deskjets currently on the market from HP that would be a wonderful substitute for this machine.

  Let me know and have a great day!
  

• HP Envy5530 cancels 3 pages in the print job.

  I have looked at various other messages on this problem but have not seen a solution. I tried the suggestions in other posts, but they do not work.  I'm trying to print an 8-page document, using the wireless interface. At halfway through the three page, printing stops and the printer reports that it cancels the job. I'm running a Lenovo Ideapad with i3 processor and windows 8.1. Frankly; I don't think that this printer is suitable for usage and I will communicate to the supplier for a refund if a solution is found. Oh; and Yes, I put the paper size in the properties. I can print from my desktop Windows XP with USB. Kind regards.

  Hello

  I want to talk about the HP printer software:

  From your desktop, click the HP Envy 5530 icon to open its software.

  If it is not listed on your desktop, click the keys S on the keyboard to launch the search option and the Windows logo.

  Type CV, and then click the HP Envy to open its software.

  Shlomi

• How to convert a spectator spread to a page of the printer

  I have an 8½ × 11 paper, set up in front of the pages on a 12 × 18 spread (spread Viewer), with areas of ½ in. up-down-left-right serving on 12 × 18, but no area bleed in the center of the 12 × 18 distributed. I need to create sheets of printer 8½ x 11 with purge areas ½ inches along all four sides. (Shy to re-create each page) how?

  

  You must configure your document with the size of the page of the product folded and cut, always facing pages and to set up a full-bleed. Export as single pages. As Peter wrote, you have to start over. But copy / paste can cause problems with stories in several frames across different pulp spreadable.

• do not convert pagetitles in Heading 1 in the Print Document

  I'm still very new to Adobe RoboHelp 7. I converted my webhelp to Word.
  
  In all my subjects, I start a page with h1, h2, or h3 headings. I do not need to export the page to print document titles. How can I stop this unnecessary conversion?

  You can apply a conditional construction for your headers tag and then exclude that when we produce printed Documentation.