Pair two show Apple at each of the two iPhones?
I have two watches of Apple and two iPhones, and more a 6 and a 6 s each with IOS 9.3. Watches have been upgraded to 2.2. Each watch is now matched with one of the phones. I am trying to pair the two watches in each of the two iPhones using the new 9.3, but it does not work. Is this even possible or should I one of the watches désapparier in order to pair it with another iPhone?
The quick answer to your question is Yes and the base articles knowledge 9.3/Apple Watch 2.2 official iOS that I expect will be posted very soon the steps on how to do. I don't know, you can pair 2 watches to an iPhone, but anything beyond that has not been confirmed.
Tags: Apple Watch
Similar Questions
-
Can I go to the apple store and buy the new iphone battery 6?
Anyone know if I could go to the apple store to buy a new battery without having to install it?
Thank you
Jjon4220 wrote:
Anyone know if I could go to the apple store to buy a new battery without having to install it?
Thank you
Sorry no, it does not work like that.
They would need to replace the battery for you. -
Tried to connect the new (launched in July 2016) Apple Remote app, I'm not able to add the Apple Tv from my iphone (5 c), because it does not show apple tv to connect even on the same wifi. I use the latest os on iphone and TVos 9.3.3.
9.3.3 isn't the latest version of the software for your phone or your Apple TV.
Try the following steps for the Apple TV 4, check if things work after each step if necessary, before you try the next.
- Restart the Apple TV (settings > system > restart).
- Restart the Apple TV by removing ALL cables for 30 seconds.
- Restart your router. (Also try to remove the power cord for at least 30 seconds)
-
I use two iphones on the same apple ID. After installing ios 9.3.3 two iphones show the other call log also. In my view, that is a bug in ios9.3.3, because this problem started after the new ios.
No this is by design, and it was not introduced with 9.3.3 much earlier
-
I have two iphone how do I pair with my Apple Watch?
I have two iphone 6 and a Apple Watch pair two phones at the same time to my Apple Watch
While it is now possible to link several watches of Apple to a unique iPhone, it is not possible to associate a unique watch for multiple iPhones.
-
We have two iPhones, two iPads, two MacBooks. On all the calendar events synchronize correctly via iCloud except the inscriptions on the iPhone 6 +. They don't publish to other devices even if the phone receives entries from all of the other devices. All the settings on the iPhone 6 + match those on other devices. All iOS and OS 10 software is up-to-date. Anyone have any ideas on what could be the problem?
Hi there, therex!
It seems that you have done your inquiry very well and it seems you have reduced to the iPhone 6 Plus. But, since you need see events sent from the phone on all your devices, I'll be happy to help you.
Archive or make Copies of your Calendar (s) -as you work with live data, be sure to not skip this step to protect the information already there.
Get help using iCloud calendars - test all the steps, but it has been my experience that I forgot to put this particular calendar as my default calendar.
Thank you for using communities of Apple Support and have a great day!
-
Pair cant my apple wireless keyboard for my new tv4 apple... He will not be the Apple TV and not ask the pairing code enter... Anyone know what I need to do?
The ATV4 does not work with any wireless keyboard. The only alternative to the built-in function 'keyboard' is the iOS app.
-
How can I create a slide show 100% width, but have the caption in different positions for each slide.
There is placement of the legend only one for all the images in a slide show.
The slideshow widget is specialized to create slideshows of the image. The widget of composition is a much more flexible widget which allows any combination of images and text in the trigger containers or containers of target of the widget. A widget of composition could be used to create a slide show with several legends by image and/or legends of different places for each image. The disadvantage of the widget of composition is that, due to the nature flexible widget, very little is automated for you and so it is much more intensive work to create a slideshow of images using the widget of composition.
Thank you
Sanjit
-
All that I need is to install Adobe Photoshop CS6 on two computers, if someone could show me were to find the download that wouod solve my problem thanks
Mylenium
-
Apple Watch hangs on the wrist
Why my Apple Watch (42mm, series #FH of Sport * 9J6, 6.1 GB, Version 2.2.2 [13V604]) to lock up constantly when he is on my wrist, I have to re - enter the password several times. For this reason, I don't get notifications and heart rate is not taken. My Apple Watch is less than one year. I tried the clamping Strip and moving closer to the wristbone. I tried to put pressure on the back.
I tried to disable the access code to the watch and it will not allow that. He says several times that I have to enter a new password.
Help!
< personal information under the direction of the host >
Hello
So that the wrist detection works correctly, it should certainly not necessary to wear your watch too tight. For best results of this and other features, on the back of your watch must be in contact with your skin. The right fit must be neither too tight nor too loose, with room for your skin to breathe:
The sensor performance may be affected by the changes as some wrist tattoos permanent or temporary skin.
Otherwise, the following steps may help:
- Make sure the wrist detection is open: on your iPhone, in the application of the watch, go to: Watch My > General > detection of wrist.
- If you have not already done so, please update your iPhone and watch the latest version of the software, from your iPhone:
- Restart your iPhone and your watch, turn off the two devices together, and then restart your iPhone first.
- Disable the twinning and re - pair your watch:
- The app shows on your iPhone takes a backup of your watch automatically when the disparity with the app choose to restore from backup during the whole upward. Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).
- Cancel the twinning of your iPhone - Apple and Apple Watch Support
- Set up your Apple Watch - Apple Support
If the problem persists, I suggest you contact Apple Support (mail service may be available) or make a booking Genius Bar in order to have your watch checked and, if necessary, repair under warranty:
-
pair two watches on an iPhone?
pair two show Apple on an iPhone?
No, not right now.
-
The installation program:
Two iPhones (6s + and 5), an Apple, a phone number ID. I use the same Apple ID on both phones. Both phones have parallel sim cards using the same number. Both phones run on iOS 9.3 and 9.3.1 late first.
The problem:
When someone sends me an iMessage on my phone number, the message is received in one phone, but not the other. If I saw right to the problem, the iPhones of the receiver is always the one where I finally activated iMessages (in the settings).
What works:
When someone sends an iMessage to my email (iMessage), iMessage is received in both phones. When someone sends a text message SMS on my phone number, it is received in both phones. When someone calls me on my phone number, the carillon of both phones and I can answer on either.What I tried:
Made sure that two iPhones were activated in [Settings]-> [message]-> phone number [send / receive]. IMessage is switched off and back on. Restart the iPhone. Signing and to iCloud. Reset the network settings. Hard reset the iPhone. All this on two iPhones many times and in different orders. All no Apple support told me of for iPhones for a 51 minute call. Another pair of iPhones (4 and 5) running iOS 9.3.1. Nothing did.Questions:
Is someone using a similar setup? Have you had the same problem? You resolved it somehow?
PS:
I am well aware that the problem might be circumvented by changing the configuration (for example using separate Apple ID or separate numbers).
But I'm only interested in solutions to this real configuration (two iPhones, Apple ID, one number). If you have to run on any version of the iOS, please let me know.Do you think your iPhone in the service to the front (on the latest iPhone). If you do, try the forward (as if your first iPhone was an iPad or an iMac without SIM card). Let me know if it works, but it should. I to iPhones, and I get my texts on two of them two numbers with transfer of text messages (in the iMessage settings).
-
My iPad with Retina display (wi - fi model) to pair it with my iPhone 6 + Bluetooth is no longer visible to my iPhone and will not pair. I have reset settings network, restart hard iPad, iPad are erased and recondition. The iPad is visible and pairs perfectly with my Samsung Galaxy S, no issues what so ever. That's happened? My Apple Watch, which is paired with my iPhone interferes with the matching to the iPhone iPad? The iPad pairs with my MacBook.
Duncan2011 wrote:
My iPad with Retina display (wi - fi model) to pair it with my iPhone 6 + Bluetooth is no longer visible to my iPhone and will not pair. I have reset settings network, restart hard iPad, iPad are erased and recondition. The iPad is visible and pairs perfectly with my Samsung Galaxy S, no issues what so ever. That's happened? My Apple Watch, which is paired with my iPhone interferes with the matching to the iPhone iPad? The iPad pairs with my MacBook.
You can only pair two Bluetooth to attach only apple devices.
Here are the profiles of support iOS: Apple supported Bluetooth profiles supported -
Get help with Personal Hotspot iOS - Apple Support
Share your Internet connection with Personal Hotspot - Apple Support
-
I would like to plot data by using the XY graph as a Visual display. I have a While loop that creates a new point X and Y during each iteration. I need the XY graph to be in the While loop, because once the order to stop has been pressed the sis loop finished and the final graph to be displayed. The problem is that after each iteration, the XY graph display clears and watch point, compared to add the new point to the previous by a line connecting the two points. It works perfectly if I move the XY graph out of the While loop, but it only shows the XY graph at the end of the While loop. I would like to visually see the XY graph updated during the execution of the While loop. Any help would be much appreciated.
Thank you
You can add a data both point to a chart to a chart, you must pass the entire data group. I would use a couple of shift registers in your loop.
-
When I download a PDF in iBooks app Apple´s always displays the first page of the pdf. So, how can I change this first page to another page in the pdf file? We want to download a PDF file in the iBooks app. iBooks still displays the first page of the pdf, but the fist of our pdf page is always the same (black color). And we want to differentiate each other pdfs.
There is no standard to do this, in particular no standard method to store in a PDF file, a preview map. Is iBooks entirely to Apple, but as most of the software that he will probably use the first page without condition.
If iBooks can show something different (and it does its not useful), you will get this information to Apple.
Maybe you are looking for
-
Batterys that can be used with Qosmio F50?
Batterys that can be used with the Qosmio F50 (exept oem 3640u-1brs)?
-
Qosmio F20-155 wireless internet is too slow
I got another laptop with me that surfing on the net fast but when I use my Qosmio is quite slow?Is this something with the settings or all portable Qosmios are the same?Help me please!
-
How to stop up to generate a waveform of the entire cycle when click on the stop button
Dear engineer OR,. I have generated three AO signals to control my scanner and data acquisition. Two ramp signals is to control the galvanometric scanner (x and y). A TTL signal is to trigger the acquisition of data. Whenever I click on stop, the ram
-
System DLL user32.dll was relocated in memory.
DLL user32.dll system was moved in memory. The application will not work correctly. The move took place because the C: DLL \WINDOWS\system32\SHELL32.dll occupied an address box reversed for Windows system DLLS. The vendor supplying the DLL should be
-
CPU is thrasing like crazy, up to 100% CPU usage almost instantly.
I use IE 8,00. Windows XP SP3. When I browse the Internet, the CPU goes up like nuts and in many cases to 100% use almost instantly, and a result locks all the programs that have been opened. I use the Task Manager to see the use of resources. My ant