Palm frozen screen

Similar Questions

• I have a frozen screen of Active recovery of white desk with a mouse. I think that the computer is frozen upward with a problem of recovery? Right?

  I have a frozen screen of Active recovery of white desk with a mouse.  I think that the computer is frozen upward with a problem of recovery? Right?

  How can I fix?

  Hello
  • What were the changes made before the problem occurred?

  You can try to restart the computer and check if it helps.

  If above does not help, you can read the following steps to disable the active desktop on the computer and check:

  a. to disable Active Desktop.
  b. right click on an area empty office, point to Active Desktop, and then click view as Web Page to clear the check box.
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/ie4_turnon_active_desktop.mspx?mfr=true

• Palm Pre * frozen screen low battery indicator

  Screen is stuck on the battery indicator low symbol will fuel yet, or see her if he is indeed in charge, is there a way to reset or to pass this screen?

  You have the device supported? How long have you had it charging?

  You can try to let it charge for about an hour and then reboot again.

  If this does not remove the battery and let stop you it then reinsert the battery... It is a last option resort.

• iPad 2 frozen screen cannot drag screen to the password screen

  MY second series iPad screen is frozen. He gets daily updates everyday. I can't slide to get to the next screen, but in the password. I trie to turn the unit off and when I get to the screen to swipe the power, I can't drag to close. How can I solve this problem?

  There are some helps out here If your iPhone, iPad or iPod touch won't turn on - Apple Support

• Connect to frozen screen

  user, password and login frozen login screen buttons. updated, deleted and reinstalled and still have the problem. installed click to call. I use firefox. Help!

  darrellf wrote:
  

  Thanks, that works, but I can't update because it puts me in the same situation

  As long as you use the same shortcut with the /legacylogin switch, update of Skype should not change.

• My coimputer is frozen screen update of ONJ won't be in what be frozen at startup 4 of 10 updates for microsoft

  When I turn on my computer and is frozen on the opening screen of say 4 of 10 updates do not close or shut down the computer

  Hello

  1. which version of the Windows operating system is installed on your computer?

  2. What is the error message or an exact error code?

  First of all, I would say you reboot the computer and check if that helps. If restarting the computer did not work, then try the following and check if it helps.

  Method 1:

  Start in safe mode and put the computer in a clean boot state, and check if that helps.

  How to solve the problem by running the clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135 Note: once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Note: the steps apply to Windows 7 and Windows Vista

  Method 2:

  Perform the system restore and restore the computer to a point when the computer was working fine and check if it helps.

  In Windows 7 system restore:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  In Windows Vista system restore:

  http://Windows.Microsoft.com/en-us/Windows-Vista/products/features/system-restore

  Note: If you are unable to boot to the desktop, it would be better to complete the restore of the Windows environment recovery system and check if it helps.

  What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Method 3:

  Try the steps in the following Microsoft article and check if it helps.

  The problems with the installation of the updates:

  Windows Vista: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-with-installing-updates

  Windows 7: http://windows.microsoft.com/en-US/windows7/Troubleshoot-problems-with-installing-updates

  And also check the error before installing the Windows updates.

  Hope the information is helpful; If the problem persists, please respond to us with the error code or error message.

• Palm Pre screen does not

  I bought my Palm Pre July 4, 2009.  The phone was working today and when I got home I plugged it to load.  I come back an hour later and the screen would not activate.  I tried to put off tension.  I removed the battery.  The screen is not on yet.  I contacted a Sprint store, they referred me to a repair center that was closed.  Sprint customer service referred me to my insurance, but the phone was not damaged.  They gave me a 1-800 number, but a message said I would be charged since the phone was spent 90 days old.  How can I get warranty repair/replacement?

  It was not corrupted should it be covered by the warranty. Palm tech support online at 877-426-3777.

  Check out this post, a second.

  http://forums.Palm.com/Palm/board/message?board.ID=weboshardware&message.ID=5264&query.ID=89197#M5264

• When I turn on my computer Windows 7, I'm frozen screen

  I have windows 7.  Lately when I turn on the computer everything is ok until I log in, then the screen opens and displays all my icons but remains frozen and nothing works.  Heelllp!

  Hello

  Thank you for giving us the opportunity to help you with the problem of Windows.

  Method 1:

  Step 1:

  We will start the computer in safe mode with network to verify functionality of Windows.

  Startup options (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 2:

  If it works fine in safe mode with network, then perform a clean boot and check if that helps:

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to solve the problem by running the clean boot in Windows Vista:
  http://support.Microsoft.com/kb/929135

  Note: when you are finished troubleshooting, work step 3: Reset computer to start as usual.

  Method 2:

  Log on to the computer manufacturer website and update the latest drivers for chipset, BIOS (Basic Input\Output System). Check also for any other updates of device driver and application software.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Note: Update of the BIOS can be a complicated process, and if an error occurs, your computer could be rendered unusable. Be sure to observe the instructions of the manufacturer.

  I hope that helps!

  If the problem persists, let us know.

  For all windows to post questions to please us.

  We would be happy to help you!

• Speckled in the Palm Pre screen

  Sprint replaced my Palm Pre because of a defect. Twice, they tried to give me a refurbished device where the screen has a model strongly and irregularly spotted, as if it were very dirty from below. The result is it is difficult to read the text in small print, and I get nauseous since a session extended with the phone. The Sprint Store recognizes that it's new and unusual, and they are at loss as to what is happening.

  Sprint is yet another phone comes in next week, which I hope it will not have this problem, but nobody knows what's going on?

  Sprint has been able to find a phone handed to nine without the mottled screen, so I am now a happy camper.

• Blue or white line horizontally across the top of iPHONE 6Plus.  Frozen screen.  Phone hardware issue/replace?

  Blue, sometimes white horizontal line appears at the top of the iPHONE 6Plus.  Sometimes, the size increases.  The screen freezes.  Restart does not help.  Phone hardware issue/replace?

  knittyfingers wrote:

  Blue, sometimes white horizontal line appears at the top of the iPHONE 6Plus.  Sometimes, the size increases.  The screen freezes.  Restart does not help.  Phone hardware issue/replace?

  Back up your device, schedule an appointment with the genius bar and bring it to the Apple store.

• Portege M400 is frozen, screen goes black and the fan speed increases when moved

  Can someone help me please?

  I recently received the Portege M400 from a friend 4 days ago and reformatted for Windows XP Tablet Edition.
  Everything's fine until I wanted to move the laptop to my coffee table, but as soon as I move the laptop it freezes, the screen goes black and the fan speed increases dramatically.
  So far I have had no success in the resolution of this problem and I really appreciated, is that someone could help me!

  Have you installed the OS using a Toshiba recovery media or you have installed the version of the OS?

• Frozen screen ipad mini

  I have an old ipad mini 2012 great summer so far but this morning the screen froze and it moves what do I do to get it back

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

• HP Color LaserJet MFP M177 Pro: MFP177 frozen screen energy saver logo

  My new Color LaserJet Pro MFP M177fw still works, but the front is frozen with the logos of saver hp and energy, which means that there are no features in the control panel. I can therefore use it to manually, make copies, or do something that I would normally with the front panel. I tried everything the hp support asked me to do it (plug it directly into the wall, restart it, hold down the power button for a minute, plug, reconnect everything, etc.) and nothing has solved the problem. It is clearly a hardware problem?

  Hi @eng-ihab,.

  Welcome to the Forums of HP Support! I see that the printer is locked during initialization. I want to help you solve this problem. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  The update of the firmware usually fixes this problem, but I don't see one available for Windows 10. If the printer is installed on an older operating system also, I would say to run the update of the firmware with it.

  Here is the link: HP Color LaserJet Pro MFP M177fw, select the operating system.

  I would say to remove all toners, turn on the printer and wait for the printer to the State to reinstall toners manually. Just to rule out a toner not sitting correctly, the origin of this problem.

  You can move manually the carousel is not blocked.

  Open the scanner cover and cover less than one so you should see the toners.

  On the left side of the black frame, you will see an oval hole with a piece of white plastic on the inside.

  You will need to use something to press the white plastic piece, at the same time, push the carousel backwards, do not touch the toner however. It must be in good position to get out the toner.

  I've included a picture with the region, where to use the manual function of the printer.

  

  Make sure that the print queue is also allowed to leave, I saw this also cause the printer go in initialization.

  I can send a private message with some one more step to try.
  In the forum next to your handle name simply click on the envelope to see.

  If there is anything else I can help you, let me know. Thank you.

• Cannot turn Off / frozen screen - updated edition: solved

  
  

  He was so frozen that we couldn't access anything whatsoever, including the mode.  We had already put him in the MSC.  But now the button upward for 15 seconds, it resets and is now usable.

  Thanks for the reply.

• BlackBerry smartphones frozen screen, possibly an easy Question

  Hi all, I tried to read the FAQ before asking this question, but they do not seem to work now.

  I had my Storm for a little over a week and the screen completely froze and becomes scrambled all by sending a text message.  I restarted the storm by plugging the charger and now it will not load even upward.  I received an error once, which then froze again the screen.  After that, I tried to reboot again, and he brings just to the top of the screen (sometimes garbled, as well) Verizon Wireless.

  Is there a way to fix this without doing a hard reset (and lose all my data)?

  Try this:

  Leave the appliance to charge 2-3 hours and then, always toujours relie connected to the USB cable, remove the battery from the camera a few seconds and plug it back. If it starts - let - the charges to 100% (check the Options > status for the percentage).

  If it does not start - try using a wall charger if you're not. If you are connected via USB to the computer, make sure that you have Desktop Manager (or USB device drivers), you can download it below.

  Make sure that your USB cable is connected to one of the main rear USB ports of the PC. A USB hub, or USB Monitor port not a USB port on the front of the PC.

  Download Desktop Manager here:
  https://www.BlackBerry.com/downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22