Palm Pre Plus 3 G Mobile Hotspot guard fall Ubuntu 9.10 (Verizon)

Similar Questions

• Using Palm Pre Plus on Verizon without data plan?

  Hello people,

  I'm trying to find out if it is possible to use a Palm Pre Plus on Verizon without data plan.

  Right now I have six years old phone clamshell and an iPod touch in my pocket, and I'm looking to consolidate. In addition, locked position of Apple don't gives me the warm shudder blur. WebOS from Palm running on the emulator gives me the warm fuzzies.

  Research on the issue with Google, I saw other people ask the question at the time was the Sprint Pre only. Apparently the Sprint did not yet allow activation of the phone without a data plan. In addition, the question of whether the palm profile account can be installed over wifi there.

  I also met photos showing that WebOS 1.2 would have a toggle to disable the use of the map data.

  So people, you guys what do you think? Is it possible that this is possible? Thank you!

  I suggest you look at www.precentral.net work is around like this. It is outside my area of support, but I'm sure you can find what you need there message board.

• Help free a Palm pre Plus from AT & T!

  Hello

  I am new to the forum and also how a phone is currently open.

  I just got my Palm Pre Plus new bought at AT & T USA with our commitment, it now turns out, it is locked and there are new without any profile.

  As I live in Thailand where the phone will be used with a local SIM card and a map.

  I tried via Nextgen server to unlock the phone with the success, so I need some help now.

  Been able to boot into recovery mode and run webOS doctor.

  Now the problem is how do I run the bypass activation tool?

  If I put my local SIM the phone net work pin code request, which, I think I should get through the Nextgen Server tool?

  Hope someone can guide me step by step.

  Thank you in advance.

  Hi fats,

  Welcome to the Palm Forums! Then, because you bought an ATT phone, it is locked to ATT. At this point, you have 2 choices. You can call ATT and get the unlock code (which they will give you as long you don't owe them any $$$) or return the phone and purchase a phone unlocked live HP/Palm.

  Regardless of the method you choose, you should be able to use your local SIM card.

• Charger Palm Pre Plus for AT & T

  Nice day

  I'm about to GET a & AT T Palm Pre Plus (P ^ 3). However, I don't live in the United States. It seems that I get the activation and unlocking installs pretty easily, but I am curious about the charger. I will also use the touchstone charger.

  It is the image of the charger that comes with the Pre.

  

  I see that it uses the A-type connector to the United States. Where I live, we use the British type g plug (in fact, all the technical features are identical to the British Standard).

  So the more important question is, assuming I can get a form of adaptation, it will work with the sockets 230V here? As in, are they auto detection and can switch from 110V to 230V?

  I know also, Palm has an international charger but if she is able to switch, might as well use a simple adapter.

  Thank you.

  Looking at the map in my hand, it says clearly, ' input: 120-240 / 50-60 Hz.

  Looks like you'll be good to go with a physical card!

  WyreNut

• Palm Pre Plus vs Palm Pre Plus black

  Hello!

  I'm considering buying a Palm Pre Plus with Verizon service.  I've also seen a Palm Pre Plus Black.  Anyone know what's the difference between the two?  If there is a difference, which one is better?

  Thanks for your help.

  Hello Mindy and welcome on the fourms Palm.

  I'm not sure that there is a difference.  All Palm Pre and Pixi phones come in only one color: black.

  Mr. Henry Ford would be proud.

  Alan G

• Move the Palm Pre Plus contacts in gmail

  When I got my phone it took my gmail contacts automatically and put them in the list of contacts on my phone.  I now have contacts on my phone that I need to have in gmail as well.

  Is it possible to export the contacts from the phone so I did not add this information manually in Gmail too?

  You can export your contacts from palm...

  OK it is easy I swear

  1. Open the phone application
  2. For CDMA phones, dial # 66623 #. For GSM phones, call #* # 66623 and press the green call button ( )
  3. Press the green button "CelleBrite Export"
  4. After ' step 1: export file... ". "is complete, follow the signs for ' step 2: connect the USB cable" and connect your phone to a computer via a USB cable
  5. Access the USB by clicking on the notification of USB drive
  6. Make sure that you set the option on the file manager from the computer to "Show the hidden files and folders" and open the folder ".temp" on your phone
  7. A file called "PmMigration.vcf" will be inside the folder ".temp". Just copy this file to your computer and your phone.
  8. Well to eject your USB key. You can simply save this file for later, or use it to import your contact list in a program or a website that accepts (for example Gmail .vcf files

  You can connect cela your microsoft contacts, gmail, etc.

  fun ^^

• Two weeks in the palm pre plus - questions and opinions for 10 years 'lover palm.

  I HAD PALM PHONES FOR 10 YEARS... I see some stupid missing links in this new version...

  1. to speed up the dial I have to turn on the phone, unlock the phone, open the contact, person of goto, open the keyboard, reduce the size of the entry, press and hold enter speed dial, and the phone will dial the person... Am I missing something, or is this a ridiculous ritual, compared to the old way? It is faster to just dial the phone yourself, isn't it!

  2. no 'list view' in 'Notepad '... I have 100 entries with multiple keywords. No display of the list isn't good...

  3. contacts - if you have 4 different "doctors" in the contacts and don't remember all the names, without an access point 'Search', you're in trouble.

  4 calendar - whenever you make an entry, you must remove the default set 'alarm '... What is with that?  If you want to set an alarm, set one - don't eliminate it whenever I do an entry...

  5. Calendar - not 'look' ap?

  6 calendar - what is the purpose of the event 'place' - If you want to enter a location, enter his name - I don't know why it had to be put there as a permanent entry?

  I would be grateful some input or opinions of others!

  Yes Yes - keyword in the company - I have 5 jobs handymen - I just put the handyman in the 'company' and each came with the use of the keyboard - good replacement and a good idea - thank you thank you

• More Palm pre WiFi and AT & T

  I just bought a Palm Pre Plus for use with AT & T.   I have a few questions about the use of WiFi.

  When AT & T tell me that WiFi is disabled on the palms of AT & T, are they just reference to the "attachment" function

  which allows the phone to be used as a mobile hot spot?

  If the phone is connected to my home WiFi network, it means I save data to use on my AT & T Bill?

  Now that AT & T is the elimination of unlimited data plans, it is particularly important.

  Thank you.  I hope someone can help.

  Bruce Berman

  Yes, they are referring to attach.

  And Yes, connect your phone to your own WiFi network will save its use.

• Palm pre more (Verizon) does not connect to the Exchange Server

  I've been on the phone for 3 days (bought the Verizon Pre the day it came out) and couldn't connect to my companys mail server. I had a Palm Treo 755 for years and have always got my email to that. After days of talk with representatives of the Palm, I am told that no. Verizon Pre is able to connect to a server to exchange corp at this time. I'm quite upset hereby, since after listening to a Council of representatives of Palm, I've had a computer scientist to ensure that our server was updated, we had the correct certificates, etc. This of course took hours to complete, and the person of COMPUTING time is not cheap. So afte spend all that time and money dealing with this, I learned today by a supervisor at Palm that ANYBODY on Verizons network is able to connect to their mail corp server and that it was an issue that is discussed in.

  I searched the forums and found a lot of this Sprint service problems, but didn't find any with Verizon. Anyone else out there on Verizon and unable to connect? Or maybe the better question is, someone out there have a pre with Verizon and IS able to connect to their server Exchange (EAS)?

  Correction to my last post. After doing a reset on my phone and update of our server, I was able to connect to my email. Thank you for your comments update to SP2. Overall, I am still very upset over the phone support provided Palm. As I mentioned before, I brought to the SP2 SP1 vs option several times by phone and I said whenever it was not the question. Even my computer, have fought a little, to get this update since that he had heard the same information I did representatives of the Palm on the phone. After you have created an account on here and PDAguy pointing me to the long thread about people having a similar problem, I showed it to our it guy and he has fortunately upgraded our server to SP2.

  I'm happy to get this issue resolved, but feel still Palm mislead me along the way, probably cost me over $ 400 in IT supports, lost my time and traveling in a Verizon store to swap a perfectly good phone and I try the different options which should not be fooled. I did 3 different calls to Palm (with my COMPUTER technician who has been paid by the hour) and each call lasts about 1 to 1-1/2 hrs. Most of the current time on hold any 'research' rep my question.  Even had a representative on the phone to me lie and tell me that he was able to connect to our server (using my info) with a meadow he had with him. He told me so I had a defective phone, and I was directed to return to Verizon to switch the phone outside. After I had passed the phone out, and of course, it doesn't work, I was then told by another representative of Palm and his superior that it was a known issue and that person is with Verizon was able to connect to a server (with a pre) because of a software problem on the phone. I got a refund from Verizon to get this phone for $149, but with all my time lost, the cost of my computer and the lack of knowledge by representatives of Palm, I think I have probably the most expensive Palm Pre Plus there.

  Message edited by tjp2176 on 01/28/2010 20:03

• Palm Pre calendar, screen saver and Conference questions

  Hello

  I am a Palm Pre (Sprint) 1.4 and the Palm Pre Plus (verizon) 1.4 user.  I use the EAS option to connect to my company groupware system.  I have two problems, I need help:

  1. on the Sprint and Verizon, location of the grille section seems to offer very limited space.  Minimum Adequetly so that when I'm on the road and I am trying to get an address or con-calls, he doesn't seem to have enough space to support location data.  In addition, there seems to be no option to scroll left or right to see the data.

  2. on the phone from Verizon, when the screen saver comes in and the screen turns off, the only option is to press the power button on the top right of the phone.  However, when the phone is flipped open, it's a physical impossibility.  I then have to return the phone closed and then press the button.  It's a question on Sprint phones and through a software upgrade they have enabled the option to press the middle button a screen saver option Michael.  The same option on the Verizon phone is necessary.

  3. I don't know if it is a function or a lack of, of the CDMA network, but it would be nice to a conference call of the United Nations and switch between private calls.

  All-in-all, I'm very happy with my phones and think that WebOS is more operationally effective phone OS on the market.

  Thank you

  Babak

  1st edition. Just, I typed a few characters in my location section and had more than 100 characters without running out of space. Never came to fruition. To access you type on a line of text, hold down the option key down, and move your finger to the up, down, left, right anywhere on the screen. It will be your cursor from that direction.

  2. I have sprint, so maybe verizon is different. But by pressing any key on the keyboard while his opening turns my screen turn it back on.

  3. no idea on it.

• New to Palm pre more

  I plan on getting a Palm Pre Plus and I was wondering what people had to say about the phone.

  Hello and thank you for using the Palm Help Forums!

  I like it. Thanks to the community of open source, the phone is 10 x more fun as well. You should check www.precentral.net for all sorts of tips and tricks that you can do with the device.

  If you are looking for a more general review, you should go to www.phonescoop.com or something.

  I hope this helps.

  -Pat

• No Mobile Hotspot in my pre 2

  There is no Mobile Hotspot app in my Pre-2. I use it with Vodafone Spain. Palm support told me it's because Palm has not signed a contract with the provider of the app in order to make available pre 2.

  If someone can confirm this? There is no Hotspot app in the Pre 2?

  Thank you.

  Problem solved.

  My Pre 2 appears now associated with "vodafone Spain" in the profile page (http://palm.com/profile). He appeared as 'A LINE' before you speak in support.

  Can I download paid apps and free apps that I saw before (Mobile Hotspot among them).

  Thank you, Palm.

• SMS does not work with T - Mobile CZ and Palm Pre

  Hi, here is my problem:

  I bought a Palm Pre from the Germany. Everything works fine, but there is problem with sending messages. I tried to ask in the Czechs, precentral forums or my carrier and no answer has solved this problem. So I ask the heart of the problem, the Palm developers.

  There are guides to get or modify certain parameters of the carrier, but without any documentation. I see in \usr\lib\luna\CarrierNetworkSettings.db3 and /var/luna/data/CarrierNetworkSettings.db3 for my carrier this line:

  

  And IMHO it should be the highlighted area in the smscNumber column. I tried to change, but nothing worked.

  I tried this phone with my friends by CZ Vodafone and O2 CZ SIM cards and everything worked very well. The problem is only mind combination with T-Mobile.

  I also downloaded new ROM of Palm.com/ROM and it has the same values.

  And my carrier: there is not much info on the configuration of the parameters of phones, but the number highlighted should be ok.

  And of course the error message. There are screenshots:

   

  So guys, what do you think about this? Where is the problem? How to solve it? Can anyone help? Are there any other DB where phone reads the parameters?

  Yes. My Palm Pre has been activated with my Czech SIM T-Mobile without problems and App catalog works as well.

  Edit: And here's problem at the main post resulution: I ask the new sim card (I had an old since the time of Paegas (10 years ago)) and everything is now ok.

• How to change the voicemail number Palm Pre (Bell Mobility)?

  Hi all...

  I wonder if someone has found a way to change/edit the phone number of voicemail by default on the Palm Pre. When I touch to listen to my voicemail on my pre, it dials my phone number (instead of composing the Bell number requires me to dial which is #902393xxxx pp then my password digital - note the # beforehand), which comes in turn allows me to leave a new message for me.

  I talked to Palm support and they told me that my phone is setup and working correctly and it must be a problem with my service provider. I've been a happy Bell customer for 10 years or more and I am sure that my voicemail works well... Just to be sure I contacted support Bell and they assured me that I have to dial sign # in front of my 10-digit number, then my password to access my voicemail.

  I know I could just program an another SpeedDial to accomplish this task, however, I can't believe that there is no way to use this function as expected?

  Thoughts?

  Thank you...

  Well Yes, it's gets me too. I'll speak to a Bell representative tomorrow, but is this the silver bullet...

  Create a contact in your address book called voicemail

  Then you enter the number you need. I found the # key registers correctly.

  For a sweet break (2 seconds, no prompt) use the letter 't'

  to pause farm (a prompt will appear on the dial to press a key to continue dialing pad) use the letter 'p '.

  That should do it.

  I went a step further. And if you're not too nervous about to search your phone (and if you have time) I made a few changes that did get to voicemail even easier than pulling the top of the dial pad. Slight caveat about this, it is really involved, may be too involved for you, but it made me love what you can do with the Pre

  I went to the Central meadow, I configured my pre for Homebrew applications (not too hard, and had to do it on a computer with XP, it did not Win 7) I downloaded a homebrew application called launch pad (Super easy, done right the phone). I created my voicemail number to be an icon in the launch area. THEN, and this is the super cool part. I touch AND HOLD on one of the icons in the launch at the bottom of the screen until there is a ripple around her. I drag it to the launch area to take him out of the launch bar. Then I reach and grab the voicemail icon, until the ripple and drag it in the launch, and PRESTO, I have a button to access my voicemail.

  Again, I understand that this process may be too involved for you. But with a little sniffing around, I was able to add my voicemail on the launch I can access any program at any time.

  Yes I think Palm should do a better job with documentation. Their new philosophy that people don't want uninvolved help or manual files is silent. BUT I liked the fact that with a little work, you can do MUCH more functional phone. We would have to do the work? No, but I have a good feeling that Palm will impliment better functionality as time passes. They have always in the past. And until that happens, there are a few tweeks that can help until this happens.

  Love the pre so far...

• Multi-task on Palm Pre does not work

  Hi all

  I was under the impression that it was possible on the Palm Pre multitasking.

  When I start a spring Radio channel and launch a different application of the radio channel stops - unfortunately.

  No idea what's wrong here? Of course, a radio app should be able to run in the background.

  Thank you!

  Sapag

  Hello Sapag and thanks for posting...

  When Sprint TV's request was written, the multi tasking was not enabled on the application itself.  This is partly by design.  Radio and video streaming strongly uses the battery.  In addition, the deployment of the device limited the amount of time developers had to tweek the current application for the Pre.  Remember, this is the first true multi-tasking OS for a mobile device.  As time passes, additional patches will be correct and/or add functionality to the device and apps built into the ROM.

  Thanks for the comments and keep the questions coming...

  Thank you

  Colapop