Pan of < softKeyboardBehavior > < / softKeyboardBehavior > problem

Similar Questions

• Acrobat DC in Windows 10 problems

  I use the latest version of Acrobat ms in Adobe CC. yesterday, I upgraded from Windows 8.1 for Windows 10, but I had a few problems. By double clicking on a PDF file in Windows Explorer, the PDF open in Acrobat DC. But just after one or two seconds, the Acrobat DC application would freeze.

  He had strange things, however. Acrobat DC do not freeze if I only started the application but did not open a PDF file. Also, if I did drag a PDF file in the Explorer window to the window DC Acrobat, open the PDF and Acrobat DC do not freeze. Or freeze it when I opened the PDF file by clicking in the list "recently opened files" Acrobat DC.

  The only time where he froze there was when I double click on a PDF in Windows Explorer.

  There is no problem using Indesign, Photoshop or Illustrator...

  An hour ago, I turned my computer on Windows 8.1, and then Acrobat MS works as it should again.

  Any suggestions of what the problem could be?

  (Some additional information: in Windows 10 I also had the problem that the Windows Explorer froze when I right click on any file.) This problem seemed to be fixed by updating to the latest version of Ccleaner application.)

  If the preview in the file manager pane is disabled, the problem disappear and @the the file may be deleted.

• Impossible to pass all the apps that require a connection

  I had this problem since the summer power on and off: as soon I to connect to update an application, the app store fails. My connection is fine and the update process starts, but closes unexpectedly after about 30 seconds telling me that I have to go to the "items purchased" (note to Apple the German translation is bad). Of course, even when I switch to the pane of purchases the problem persists. The same problem exists when trying to install all new elements it, even for free.

  Initially, I had this problem with XCode 7. I spent over an hour with telephone support from Apple to try to correct this there included removing and running traces. They let fall the ball for several weeks and when I get back in touch they had no solutlon. At some point in October, the seeming problem to resolve itself but reappeared since then and currently preventing me from updating to OS X 10.11.

  I enabled debug for the app store and tried the different options all to nothing does not. I don't see anything special except for "storedownloadd (488) deny/dev read-data file.

  Has anyone experienced something similar and managed to fix it?

  Please read this message before doing anything.

  This procedure is a test, not a solution. Don't be disappointed when you find that nothing has changed after you complete it.

  Step 1

  The goal of this step is to determine if the problem is localized to your user account.

  Select the feedback connections* and log in as a guest. Do not use the Safari connection only 'user comments' created by 'find my Mac '.

  While signed in as a guest, you will have access to your documents or settings. Applications will behave as if you use them for the first time. Do not be alarmed by this behavior; It's normal. If you need any password or other personal information in order to complete the test, save, print, or write them before you start.

  Test while signed in as a guest. Same problem?

  After testing, log on to the guest account and in your own account, disable it if you wish. The files that you created in the guest account will be automatically deleted when you log out of it.

  * Note: If you have enabled 'find my Mac' or FileVault, then you cannot activate the guest account. The login 'User comments' created by 'Find my Mac' is not the same. Create a new account to test and delete it, including his home folder, after testing.

  Step 2

  The goal of this step is to determine if the problem is caused by changes in the system of third party that load automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Please take this step regardless of the results of step 1.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you normally connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of steps 1 and 2.

• Control vs control tree string: "changed value" calendar race?

  I develop a configuration dialog box that uses a tree control and a tabbed pane and I have problems with the timing of the event. The tree control presents the structure of the connected equipment and the tabs pane shows the configuration for the selected node. The tree control is used as a tabbed pane may not have additional tabs created during execution, and the connected equipment vary from installation to installation. Rather than write a pane tabs hardcoded for each deployment, I use a flexible class structure that allows an "m x n' configuration - m zones with n channels per area, but n varies by area. By selecting a node in the tree fills the tab corresponding to the values of the node. The number of zones is limited the number of configured system views (discrete monitors) and the total number of channels is limited to the number of installed channels A/D. To capture the configuration data, each control in the tabs pane is a 'value changing' event, which sets the value of the element in the class.

  Now that you know what it is supposed to do, here's the problem: it only works if you do not click on the tree after a value is changed. For example if you enter in a new 'ladder' and then click elsewhere on the tabbed pane, the value is correctly associated with the node. If you click another node in the tree before leaving the field, the value is assigned to the node clicked instead. I looked at the timestamps for events and field "changed value" fires first, so the value of the tree should still be the original node. On the contrary, the tree seems to update before the event to "change the value" of the field is managed, even if the event of the field were pulled everything first. I read the value of the tree inside the event handler for the field, but there is no way to get the 'previous' value is the field control in the tabs pane.

  So where should I go from here? Is this a legitimate race condition, or am I just not processing events properly? I prefer not to post the code because it is pretty heavy with all its dependencies, but I can try to do a simple example.

  

  Cranky wrote:

  It seems that it is not an event filter for the change of the tree: value.

  This kind of surprises me.  But I couldn't find either.

  My other thought (like Altenbach) would store in a shift of the currently selected item register.  Since the change in value of the tree that happens after change in the value of the parameter, you read the registry value of offset for the change of setting and then update the registry to offset with the change in value of tree.  Do not forget to connect the values directly but for any event except the change in value of tree.

• Scroll to Image/object/MovieClip as the Playbook Native clock App

  Hi guys,.

  I'm curious to know what makes scrolling image/object/movieclip effect, just like the native clock of the playbook application...

  What I get in my little mind, is that the clock app uses scroll pane that scroll horizontally.

  The 3 points are inside a container, and the container is set as the content of the scroll pane.

  the problem is that I do not understand how the elements also scaling vertically with the movement (scrolling the scrolling pane).

  I tried to scale according to the scroll event deltaX, but not good so far...

  Could someone here please help me get the idea of how to do this?

  Before thanks for your help

  Hi in case there are others like me who is also curious.

  Now I can able to scroll carousel effect, as the native clock of the playbook app.

  Here's what I do:

  -do clip in flash pro that animate the object to scale up and down.

  -import the .swc published in Flash Builder project,

  -call class video clips, add it to a container,

  -define the container as Scroll content pane,

  -Update of the current image of the video clips respectively as the scrolling of the scroll pane

  Sorry that my code is still a mess, if you want to know the code I use just PM me

  Now I am facing the problem with scrolling of the scroll pane, which does not display content to the top position of 1024px, but that's another question, which I'll post in the different thread

• ScrollPane broke on the device

  Hey there,

  I am having trouble with the scrollpane UI element. I created a sprite that is larger than the scrollpane as content, so the pane scrolls. The problem is that when I test on the Simulator, everything works perfectly, however, when I test on the device the application crashes as soon as you press the shutter. Y at - it a bug with the scrollpane component that I'm not aware? I searched the forums for similar situations, but I can't seem to find a solution. Here's some code.

  content = new Sprite();
  content.graphics.beginFill( 0xDDDDDD );
  content.graphics.drawRect( 0, 0, 557, 500 );
  content.graphics.endFill();
  
  contentPane = new ScrollPane();
  contentPane.x = WIDTH * 0.3 + 80;  // WIDTH = 1024
  contentPane.y = 40;
  contentPane.width = 557;
  contentPane.height = HEIGHT - 80; // HEIGHT = 540
  contentPane.scrollDirection = ScrollDirection.VERTICAL;
  contentPane.setScrollContent( content );
  

  Any help would be appreciated.

  Hey all,.

  I thought about it. I had a structure relatively large screen, and the application has basically been getting bogged down in the structure of the event. As events have been passed through all the events of the display. Here are the two references used to decide the issue.

  http://www.leebrimelow.com/?p=2537

  http://help.Adobe.com/en_US/ActionScript/3.0_ProgrammingAS3/WS5b3ccc516d4fbf351e63e3d118a9b90204-7E4...

• Error message when recording

  We have record issues published a PDF file that is stored on a shared network folder.

  When you try to save sometimes you will receive the following message:

  The document could not be saved. The file may be read-only or another user can open. Please save the document under a different name of in a different folder.

  The document is not read only, and is not open where else. I read somewhere that the preview in windows Explorer pane can cause this problem, so I disabled it but I am still getting this error.

  Hi Alex,

  When any user clicks the PDF for an overview on the preview pane, then the PDF is locked and will not be able to get open by other users and display the above error message. Up to what the user clicks on another file the lock does not get released on the file.

  You can check the status of the file to: "Computer management" > "System Tools" > ' Shared Folders' > "Open Files", it will display the pdf clicked ' Mode open > read ' status

  If the file still shows as locked playback status, then you must check the permissions on the network folder.

  This problem occurs with a different network folder?

  Kind regards

  Rave

• Toshiba BT Stack 5.10.01 (T) and P990i Windows PAN network problem.

  Hi all

  I would like to ask if someone succeed PAN configuration between battery Toshiba BT and SE P990i?

  I have it set on Debian Linux and it worked like a charm, but it does not work under windows xp. P990i connects to the laptop but it lasts forever.

  Strange thing is that I've successfully connected two laptops using BT PAN without problems.

  Thanks in advance and best regards.

  Mariusz.

  p. s.
  If anyone has some ideas, please email me: fingerr (at) interia (dot) pl.

  Hello

  If there is any possibility try to connect your mobile phone with a few other non-Toshiba notebook. It will be interesting to know if there is the same problem under Windows XP Home edition.

  I don't have the same mobile phone but my Nokia and Motorola s wife works well with my Tecra and BT Stack 5.10.01.

• Windows mail attachment problem-don't see attachment sign on the preview pane

  In my windows mail, I see attachment sign on the preview pane, so whenever I have need to double click that mail and open the attachment. Pls Guide.

  It is a known problem if you installed IE9.  There is no solution.  You can either uninstall IE9, or you can continue to open the mail in a separate window to save attachments.  Moreover, with IE9 installed, the default font specified under Tools | Options | Read is no longer accepted and if you want to change the default font, you must change it in IE via Tools | Options | Fonts and then set the font here.

  Steve

• Resizing the preview pane Windows problem.

  I want to use the Windows preview pane in Solution Explorer, but the problem is that it automatically resizes a very large size, which makes the structure of folders in Explorer very low.
  Even if I resize it, after closing and re-opening of a pan Preview windows Explorer goes back to its large size.
  Its very annoying.

  Check the screenshots
  http://I210.Photobucket.com/albums/bb228/Jaxx89/PREVIEW_PANE.jpg

  http://I210.Photobucket.com/albums/bb228/Jaxx89/PREVIEW_PANE1-1.jpg

  Jaxx89,

  Thanks for the screenshots, that gives a little clarity. Did you always have this problem or is it a recent phenomenon? Just to be on the safe side, you might want to try to start in safe mode and clean boot in order to eliminate all possible applications as the culprit.

  In addition, a user has found a workaround in the first response in a section of third party here.

  I can't wait to hear back on your part.

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Songs disappearing; error message: "unable to listen to a number of files queued. To get information about the problem, click on the icon next to each file in the list pane. »

  I get this error message: "unable to listen to a number of files queued. To get information about the problem, click on the icon next to each file in the list pane. "The thing is that he played the songs darned two days ago, what has happened since then!

  Never mind. I totally forgot that I had renamed a folder that hosts my music. Duh.

• DVD burning problem: I burn the movie on widescreen PAL on a DVD-R disc. I managed it burned without menu. Now, I've added a "Pan and Zoom" menu with a main marker at 00:00:00:00, 21 scene markers, and a stop at 01:29:32:17 (th

  DVD burning problem: I burn the movie on widescreen PAL on a DVD-R disc. I managed it burned without menu. I have now added a "Pan and Zoom" menu with a main marker at 00:00:00:00, 21 scene markers and a cleat to 01:29:32:17 (the end of the film). The combustion is interrupted with a message to watch a C:\Users\ianle_000\Documents\20151206160446.iso file. There is no file. The message also provides a link for an explanation. This Web page is impossible to obtain. I'm running on a PC with Windows 8.1.

  Thank you once again. I burned the DVD!

  It is the first film for which I have reached the stage of burning. I'm not sure why she didn't in the first place. I tried to burn the "no menu" version, but at the time, was shot the DVD itself - I wonder when he reached this point?

  So, I burned the "no menu" version to another DVD, that worked, then the version of menu, with no cleat to a third DVD, which reads perfectly.

  Now that I have a successful routine, I'll stick to it.

  Thanks for all your help.

  I'll close this discussion now.

• Web flash zoom and pan problem

  I am doing a map interactive with zoom and pan capability. The demo is in this url: test_zoom

  Zooming is done with the mouse wheel, and pan to click and drag.

  My problem is that I want the photo (video clip with the instance 'map_mc' name) in the middle of zoom and pan, but all objects move at the same time...

  I use the following script:

  canvas.addEventListener ('mousewheel', MouseWheelHandler, false);

  canvas.addEventListener ("DOMMouseScroll", MouseWheelHandler, false);

  var zoom;

  function MouseWheelHandler (ezoom) {}

  If (Math.max (-1, Math.min (1, (ezoom.wheelDelta |)))) (- ezoom.detail))) > 0)

  Zoom = 1.1;

  on the other

  Zoom = 1 / 1.1;

  var local = stage.globalToLocal (stage.mouseX, stage.mouseY);

  stage.regX = local.x;

  stage.regY = local.y;

  stage.x = stage.mouseX;

  stage.y = stage.mouseY;

  stage.scaleX = stage.scaleY * = zoom;

  internship. Update();

  }

  stage.addEventListener ("stagemousedown", function (emove) {}

  offset var = {}

  x: stage.x - emove.stageX,.

  y: stage.y - emove.stageY

  };

  stage.addEventListener ("stagemousemove", function (ev) {}

  stage.x = ev.stageX + offset.x;

  stage.y = ev.stageY + offset.y;

  internship. Update();

  });

  stage.addEventListener ("stagemouseup", function () {}

  stage.removeAllEventListeners ("stagemousemove");

  });

  });

  I need assistance with this script so that I have move and zoom only the clip 'map_mc '.

  Thank you

  use:

  var tl = this;

  var zoom;

  canvas.addEventListener ('mousewheel', MouseWheelHandler, false);

  canvas.addEventListener ("DOMMouseScroll", MouseWheelHandler, false);

  function MouseWheelHandler (ezoom) {}

  If (Math.max (-1, Math.min (1, (ezoom.wheelDelta |)))) (- ezoom.detail))) > 0) {}

  Zoom = 1.1;

  } else {}

  Zoom = 1 / 1.1;

  }

  TL.map_mc.x = stage.mouseX;

  TL.map_mc.y = stage.mouseY;

  TL.map_mc. ScaleX = tl.map_mc.scaleY * = zoom;

  }

  stage.addEventListener ("stagemousedown", downF);

  function downF (e) {}

  TL. Offset = {y: e.stageY, map_mcX:tl.map_mc.x, x: e.stageX, map_mcY:tl.map_mc.y};

  stage.addEventListener ("stagemousemove", stagemoveF);

  stage.addEventListener ("stagemouseup", stageupF);

  }

  function stageupF (e) {}

  stage.removeAllEventListeners ("stagemousemove");

  }

  function stagemoveF (e) {}

  TL.map_mc.x = tl.offset.map_mcX + e.stageX - tl.offset.x;

  TL.map_mc.y = tl.offset.map_mcY + e.stageY - tl.offset.y;

  }

• Multiple, overlapping nodes or canvas in a pane: the sequence of rendering problems

  I have the following problem:
  
  1 stream outside, inside the following items in the following order:
  ... (1) canvas (0,0,100,100)
  ... (2) button (0,0,100,30)
  ... (3) the canvas (90,90,100,100)
  ... (4) button (90,90,100,30)
  So there is an overlapping area of 10 x 10 (between 1), (2) and (3), (4).
  
  When moving with the mouse on the button 4 then 1-canvas is drawn on the 2 key - that is not correct.
  
  It seems to me like a-sequence/dependency-rendering problem: moving the mouse makes again 4-button, triggering a new rendering of the Web 1 because of that overlap, but 2 buttons seems not to be re-rendering.
  
  Is there a "thought/understanding" - problem on my side? -No suspicion is apprecaited...
  Thank you!
  
  
  
  
  This is the code to reproduce, when running: move the mouse on "(4) button.

  package ztest;
  
  import javafx.application.Application;
  import javafx.scene.Scene;
  import javafx.scene.SceneBuilder;
  import javafx.scene.canvas.Canvas;
  import javafx.scene.control.Button;
  import javafx.scene.layout.Pane;
  import javafx.scene.paint.Color;
  import javafx.stage.Stage;
  
  
  public class Test_40_Canvas extends Application
  {
      class MyPane extends Pane
      {
          Canvas m_canvas1;
          Button m_button2;
          Canvas m_canvas3;
          Button m_button4;
          
          public MyPane()
          {
              m_canvas1 = new Canvas();
              m_button2 = new Button();
              m_canvas3 = new Canvas();
              m_button4 = new Button();
              
              getChildren().add(m_canvas1);
              getChildren().add(m_button2);
              getChildren().add(m_canvas3);
              getChildren().add(m_button4);
              
              m_canvas1.setWidth(100);
              m_canvas1.setHeight(100);
              m_canvas1.getGraphicsContext2D().setFill(Color.GREEN);
              m_canvas1.getGraphicsContext2D().fillRect(8,8,92,92);
              m_button2.setText("(2) Button");
              
              m_canvas3.setWidth(100);
              m_canvas3.setHeight(100);
              m_canvas3.getGraphicsContext2D().setFill(Color.BLUE);
              m_canvas3.getGraphicsContext2D().fillRect(8,8,92,92);
              m_button4.setText("(4) Button");
          }
          
          protected void layoutChildren()
          {
              m_canvas1.resizeRelocate(0,0,100,100);
              m_button2.resizeRelocate(0,0,100,30);
              m_canvas3.resizeRelocate(90,90,100,100);
              m_button4.resizeRelocate(90,90,100,30);
          }
      }
      
      public static void main(String[] args) { launch(args); }
  
      MyPane m_pane;
      
      @Override
      public void start(Stage primaryStage)
      {
          primaryStage.setTitle("Hello World!");
          final Scene scene = SceneBuilder.create()
               .root
               (
                    m_pane = new MyPane()
               )
               .build();
          
          primaryStage.setScene(scene);
          primaryStage.show();
      }
      
  }

  I consider this behavior a bug. A quick and dirty solution would be the following, even if I do not want to do that in a real application:

  package ztest;
  
  import javafx.application.Application;
  import javafx.scene.DepthTest;
  import javafx.scene.Scene;
  import javafx.scene.SceneBuilder;
  import javafx.scene.canvas.Canvas;
  import javafx.scene.control.Button;
  import javafx.scene.layout.Pane;
  import javafx.scene.paint.Color;
  import javafx.stage.Stage;
  
  public class Test_40_Canvas extends Application
  {
      class MyPane extends Pane
      {
          Canvas m_canvas1;
          Button m_button2;
          Canvas m_canvas3;
          Button m_button4;
  
          public MyPane()
          {
               setDepthTest(DepthTest.ENABLE);
  
              m_canvas1 = new Canvas();
              m_button2 = new Button();
              m_canvas3 = new Canvas();
              m_button4 = new Button();
  
              getChildren().add(m_canvas1);
              getChildren().add(m_button2);
              getChildren().add(m_canvas3);
              getChildren().add(m_button4);
  
              m_canvas1.setWidth(100);
              m_canvas1.setHeight(100);
              m_canvas1.getGraphicsContext2D().setFill(Color.GREEN);
              m_canvas1.getGraphicsContext2D().fillRect(8,8,92,92);
              m_button2.setText("(2) Button");
  
              m_canvas3.setWidth(100);
              m_canvas3.setHeight(100);
              m_canvas3.getGraphicsContext2D().setFill(Color.BLUE);
              m_canvas3.getGraphicsContext2D().fillRect(8,8,92,92);
              m_button4.setText("(4) Button");
          }
  
          protected void layoutChildren()
          {
              m_canvas1.resizeRelocate(0,0,100,100);
              m_canvas1.setTranslateZ(4);
              m_button2.resizeRelocate(0,0,100,30);
              m_button2.setTranslateZ(3);
              m_canvas3.resizeRelocate(90,90,100,100);
              m_canvas3.setTranslateZ(2);
              m_button4.resizeRelocate(90,90,100,30);
              m_button4.setTranslateZ(1);
          }
      }
  
      public static void main(String[] args) { launch(args); }
  
      MyPane m_pane;
  
      @Override
      public void start(Stage primaryStage)
      {
          primaryStage.setTitle("Hello World!");
          final Scene scene = SceneBuilder.create()
               .root
               (
                    m_pane = new MyPane()
               )
               .depthBuffer(true)
               .build();
  
          primaryStage.setScene(scene);
          primaryStage.show();
      }
  
  }
  

• Problem with "Pan" effect only

  Hello

  I have a scrolling content using the pan only. ASM at the end of the series of scrollables WHO became smaller. I got this first work fine, but now I get the same frustrating problem even after I recreated the entire process and reloaded a new article. I'm in a tight schedule and I have to work on 200 more content with a features like that. How can I solve this problem? What causes this behavior? And how can I avoid this happening again?

  Kind regards

  Mikke

  

  The only time where I see shrivelled in an MSO or frame scrolling is when the overlay is created on the editing table and then. Have you created the object shrivelled on the pasteboard?