Panel tabs Spry - align tabbs to the right? is this possible?

Similar Questions

• A computer repair shop can install windows on someones computer off a 'set of generic disks' if the computer has the right to this type of windows via a PIN single/code/serialnumber?

  A few years back, I took a computer to a repair shop and had not the discs, the repair guy said that they could legally restore the computer and load it on a wide a copy of a random/generic windows (the same computer had the right of)

  is it legitimate?

  Seems like it would be, I mean if the computer has the right to this title, but I don't know if you're telling me.

  Thank you

  If the Windows license is an OEM license (ie. the computer was purchased from a company like Dell, HP, etc. with pre-installed Windows), then the license is bound to the machine.  Each manufacturer has a way to check their OEM license is valid.  One method is for the manufacturer to place a code in the BIOS of the motherboard that validates the copy of XP, when installed with a floppy disk to install from the same manufacturer.  So it should be perfectly legitimate to restore license OEM to the originating from a floppy to install OEM computer.

  HTH,
  JW

• Panel tabs on master goes to the first tab every time I change page

  Hi all

  I'm working on a project where it is important to have a widget panels to tabs as a sort of module on the right side of my site. This widget is the same through my site completely, it works by placing it on my masterpage.

  But can you help me with that? For example when I click on the 3rd tab and then navigate to another page on my website, the widget will automatically switch to tab 1. It would be great if she would stay in the 3rd tab.

  Help will be very appreciated

  Thanks in advance!

  Joyce

  Joyce-

  I understand your question. In your case, the focused tab depends directly on the user here and you want the active tab to be the one who chooses the user, no matter what page on the site, they were on - if the user chooses the second background image, you want this image of background remains the same for all pages of the site.

  Unfortunately, this isn't a customizable feature in the control panel tabs in Muse - once the switches page to a new one, it goes back to the first tab. An option to consider - instead, see target your site navigation by different pages, you can try a unique page design and navigation bring the user to different anchors on the page. Sorry I couldn't be more helpful.

  As this is a feature I've seen many users wish to implement, I suggest posting here: ideas for features in Adobe Muse

• Sometimes when I hit 'tab' he lines up on the right side of my text box. Do not do it now!

  OK, so for example I have

  Lunch noon - has

  13:00 plenary session

  14:00                                             ETC.

  ↑ This is how I want it to look, but rather when I tab to go after "noon, 1 or 2" it goes to the next line instead. How can I set up the text box to make it align on both sides?

  You want two betweenthe parties is a 'withdrawal right tab', which came through Shift + Tab.

  That said, it is difficult to know what is initially a small line to move to the next line without having seen the actual text. Do a screen capture, plaids, with display of nonprinting characters (zoom in enough so you can see) and incorporate it into a message by using the icon of camera on the webpage like this:

  

• Why is my Panel tabs or by default in the third tab, instead of the first, loading my page?

  I have a widget panel tabs on the home page of our Web site and it is essential that the public sees content on the first tab when the page loads.

  Subsequently, they can click on the other tabs to view the content. I tried to use "Arrange" "put on the map' by clicking on the object in the layout and also physically dragging the items in the layers of panels [i.e. to rearrange the order of the layers], however the opinion of the Committee keeps coming back to the third panel, which is the first in my list of layers. When I try to do this slide to the bottom of my layers for the composition of the first round table moves physically in the layout at the third round table.

  The idea is to have one appears downstairs, "Data Center..", ALWAYS showing on top and the one currently present on the top, "Engineering &..", ALWAYS on the bottom. As I said before, physically rearrange the order of layers is not working either.

  

  The tab that is open when you publish is the tab that will be open by default.

• Widget Panel tabs is too wide for the layout of the phone.

  Is it possible to reduce the width of the Widget Panel tabs for use on the layout of phone? When I get a handle on the box widget, and re - size the smallest width of the presentation of the phone, it is clear. It doesn't seem to be a way to set the width.

  Under layers go to the content area and move the Textfields to the left and/or remove photos, after that you can resize the Panel tabs.

  Hope that helps

• When I click on the start menu, I can open one of the programs listed, but cannot open the Documents, computer, Control Panel, or whatever it is on the right columnetc.

  Well they open but block minimsed on the taskbar lower... cannot be opened. However, if I try and access the Documents or any other object through a program for example, open Word, then documents... or attach a file to an email everything works fine... Thus, the folders are there are fine, just cannot be opened directly... Clues!

  Your problem could relate to Associations of files, namely the right program is offered and used to open the file...

  You may need to show hidden files. Type the Folder Options in the search box above the Start button and select view advanced settings and check that the box "display files and folders" and 'Hide protected operating system files' are not checked. You may need to scroll down to see the second element. You should also make sure that the box before "Hide extensions of known file types" is not checked.

  In Windows Explorer, note the file of your selected file extension. Right-click on the file and select open with. Note the recommended program and view the details, including the extension of file here.

• I want cRIO to start and stop the acquisition by push physical button on the cRIO, is this possible?

  When you use my cRIO 9024 on the ground, I prefer to be able to start and stop the acquisition with pressing a physical button on cRIO.

  I want to say I don't want it to be "as a start-up," I don't want cRIO to start the acquisition as soon as the power supply is ensured.

  Is this possible?

  Hi Cashany,

  you will surely find this switch status. But there are easier ways (but more expensive) for a button. Fiddling with a pen or a small screwdriver to switch USER1 is not what I call "user friendly"...

  -You have at least 2 voltage inputs on your module available. Use a switch voltage on the power inputs. Use a 'real' button!

  -You have an available serial port. You can set some pins on GND or voltage and check their status inside the cRIO/RT target...

• Tab switcher extends vertically to the right of the scroll bar

  http://IMG-URL.com/u/screenshot2-1297318178.PNG Look at the screenshot and notice the tab switcher that runs vertically along the scroll bar.

  Troubleshoot extensions, themes and problems of hardware acceleration to resolve common Firefox problems can be useful, because the feature that I see in your screenshot is not from Firefox.

• CC 2015 Mac inDesign: Selected items not highlighted in "layers panel." As square boxes to the right or the name of the element in the layer panel is missing. Help, please.

  

  See replace your preferences

• My computer is telling me that "new updates are available", but when I click on the icon of the control window Panel\Windows update appears. In the middle of this window in the small print, it says: "Page failed to load".

  My computer is a HP Pavilion a6200n

  I am running:
  Windows Vista 32 bit.
  McAfee Security Center (Comcast version)
  Browser Mozilla Firefox (default)

  If you need more information, please ask and I'll do my best to get it for you.

  Thank you.
  SAPPH

  Hello Sapphiyre,

  Welcome to the Microsoft Answers Forum!

  To better understand the issue. Please let us know the details mentioned below:

  (a) don't you get the same error message when you click on other items in the Panel?

  (b) have you done with the latest changes on the computer?

  I suggest to reset the Windows Update components and check if this helps you fix your problem. Access the link below and try the Fix mentioned in the article tool to reset the Windows Update components automatically.

  http://support.Microsoft.com/kb/971058

  I hope this information helps. Please get back to us if you have any other questions on this subject.

  Thanks and greetings
  Mir - Microsoft Answers Support Engineer
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads

• I am in muse and I split my horizontal menu to put an image in the middle two half of the. Is this possible? I'm on PC.

  Im trying to put an image in the middle of my menu but can't figure out how. Can someone please?

  You create two separate menus and place the image inbetween.

  Mylenium

• grouping of the datagrid (is this possible?) headers.

  Hello

  I need to make a layout in a datagrid (or control advanceddatagrid) that I need to display headers and columns like this:

  example:

  Customer |             Name of the vendor

  Code |   Description |   Code |   Description

  Where the Code and the Description are my columns, but how I have 2 columns with the same name I need to bundle it with a label.

  I could use columns as client Code, client Description... but I think with the group in the headers give a better experience for users.

  any help will be appreciated.

  Thank you

  André.

  You can get what you want by AdvancedDatagridColumnGroup.

  Please see

  http://www.onflex.org/Ted/2007/06/Flex-3-Wednesday-components-and-SDK.php

  http://livedocs.Adobe.com/Flex/3/HTML/Help.HTML?content=advdatagrid_02.html

  Thank you.

• Open a new tab next to current, not to the right of the related content

  The current options to open as a new tab in firefox must be open at the end of the right hand of the band tabs, or open it to the right end of the related content tabs.
  If the number of tabs between the current tab and the tab exceeds the visible through the window, there is no visible indication that the trigger was a success and a new tab was opened.
  Is there a way to get Firefox to open a new tab to the right of the current tab, but to the left of the related content tabs. This means that you would always see the new tab opening. It would also mean that if you accidentally open the tab to the foreground, rather than the bottom, the tabs related would still stay in the order (although right on the left rather than the current from left to right).

  This has happened

  Each time Firefox opened

  User Agent

  Mozilla/5.0 (Windows; U; Windows NT 5.1; en - us; RV:1.9.2.7) Gecko/20100713 Firefox/3.6.7

  Try Tab Control: https://addons.mozilla.org/firefox/addon/1480

• Why a panel tabs are saved when it is installed in a file of the UIR?

  I started a new application, open a main panel to the IUR, then created a panel tabs on the main Board.

  When recording, the Panel tabs is still missing when the file is re-opened.

  I opened a second panel of test, did the same thing, but the Panel tabs still charges when the second test panel is reopened.

  CVI 2009, version 9.1.0

  Thoughts

  Hey clunden,

  Are you able to reproduce this problem with a new project, or have you seen the problem in a single file UIR?

  It seems that something has been altered in the UIR file that kept the Panel to be registered.  I think that it is unlikely that this is a bug in CVI, but if you're able to reproduce the problem in a new project, please let me know.

  Thank you

  Brandon v.

  Engineering applications

  National Instruments

  www.NI.com/support