Qosmio F50 - Recovery required Utility

Similar Questions

• Qosmio F50 - thickness required thermal sheet

  Hi all

  I have Toshiba Qosmio F50-108. (9700M GTS)

  I intend to change the thermal paste on the CPU and VGA.
  In order to so I see that there are also thermal sheets on RAM chips.

  Does anyone know the thickness of the people?
  The sizes I can buy are 0.5 mm 1.0 mm 1.5 mm

  I can open it and measure but it will be the nuclear option :)

  Thank you very much

  Hello

  I think you mean the PAD VGA NB CATERON part number: K000064710
  There is also a CHOCK PAD part number CATERON DDR3 VGA: K000064720 available.
  I also found this part of thermal grease number 776: K000055600 is also used between the cooling module and chip.

• Qosmio F50-126 - required a lot of drivers for Ubuntu 9.04

  Hello

  I recently started double Ubuntu 9.04 and after searching on Google for 2 days straight... Well the night :| I couldn't solve my problems. I'm tired now, and I'll be straight to the point!

  * J' I NEED DE DRIVERS LINUX... * I checked toshiba drivers and they do not have an option for linux. Only for vista 32/64 bit.
  The problem that I think are related to drivers:
  The volume controlling is not right - as there are basically full on or full super low
  * I can't use wireless as I did on vista... Simply login or create an ad-hoc
  View the Driver (solved by simply going looking for driver)
  * Bluetooth driver
  * MANY OTHERS
  * Brightness setting and my multimedia light driver (light touch sensitive keys)
  also, the usb transfer rate is also MUCH slower than vista. As in vista - transfer rate was around 20 = 25 MB, but in ubuntu its about 3-4 MB (I have never seen a 6 MB/s maximum)

  Thank you

  Take a look at this site:
  http://Linux.Toshiba-DME.co.jp/Linux/

  Also check the Ubuntu forums.

• Qosmio F50 - the hard drive recovery?

  Hello

  I had a very big problem.
  I've made a few changes with my Vista regs and then I was unable to start again.
  So, I started the recovery program (second HARD drive), backed up my files and selected whole HARD drive recovery.

  Well, now problem - everything was going well, but when I walked into the Vista installation I had to shut down the computer.
  Now, when I start up the pc and load Vista I message I need to reinstall my computer again.

  Well, they say nothing about how load the recovery file but I have no option for this - only emergency mode, with the support of network, etc., but without recovery emergency. Moreover, when I select emergency mode, I can't load Vista-it says I need to run the Setup in normal mode, which told to re - install. Yep, circle-_-.

  Model: Qosmio F50

  Do you think that when I erase all the Vista disc manually - for example with linux, and then start the computer, I get a possibility to load the second part of the drive to start the installation?

  Thanks in advance because I'm really despair

  Hello

  > So, I started the recovery program (second HARD drive), backed up my files and selected whole HARD drive recovery.
  I'm a bit confused of m.
  How do recover you the laptop?
  Have you used the Toshiba HDD recovery option which could be launched by pressing F8, select fix my computer-> Toshiba Recovery?

  Usually, it is a procedure how to start the Toshiba HDD recovery.

  I guess you didn't create a recovery Toshiba drive in the past is good?
  It was a big mistake buddy because the recovery disk would help you in difficult situations

  Well, as I said above; You can try to start the HARD drive recovery. If this will not help you I think that you would need a Toshiba Recovery disk.
  You can order it here:
  https://backupmedia.Toshiba.EU/landing.aspx

• Qosmio F50 - 10 k - multimedia keyboard and recovery disc creation

  Hello!

  I have a Qosmio F50 - 10 k.
  I want to create a recovery disk, but I accidentally delete the folder, I didn't knew that contains the files for the recovery CD/DVDs. Is it possible to download? Or should I go to the store where I brought the laptop and ask?

  Another thing... my keys multimedia aren t work... I have searched for it and I saw a threat on the incompatibility of vmware, but I already remove vmware and the problem persists... What can I do?

  Big names

  > I want to create a recovery disk, but I accidentally delete the folder
  It wasn't good buddy.
  If you deleted the folder in HARD drive recovery then you will not be able to create the recovery disk
  In this case, you will need to order it here:
  https://backupmedia.Toshiba.EU/landing.aspx

  Good bye

• Re: Recovery disc creator does not work on the Qosmio F50

  Hello

  I recently got my new laptop Qosmio F50. I decided to burn the recovery disk and so I did. But during the burning process, I got an error that is:

  "Diference were detected between different folders:

  Source path: (origin)
  F:\HDDRecovery\SWImg\06907XPS.swm

  Target path: (I would translate as destination)
  G:\06907XPS.swm
  (error code: 02016F-3 c-00000000)

  Well, I've been through the posts from diferent on this forum and I didn't know of any help on this matter. Of course, I bought new DVD-R TDK and I also tried with verbatim DVD-R but it does not work.

  Anyone have any idea how to deal with this issue, because for example I have still no recovery disc and if something would have happened, I wouldn't be able to configure back my OS.

  Thanks in advance for your help

  Best regards

  Hello

  To me it sounds like the final burning self-check failed and the application couldn't t properly compare two files on the HARD drive and DVD.

  Why? It's not easy to say maybe the problem is with the DVD disc not fully supported, but I saw that you used the TDK DVD-R it are really good media and should run.

  Maybe you should try to update the firmware

• Little help for a Qosmio F50 and win 8 is required

  Hello

  I have an old Qosmio F50 and since he still has enough power to manage Windows 8 I decided to give it a try. What I did is a clean install of WIN 8 x 64 pro and I used a mixture of various models of Toshiba drivers and third parties. The results were not bad, since everything works except for a weird thing.

  Specifically, I used:
  -Drivers of the Chipset V, 9.4.0.1022 directly from Intel.
  -V with Toshiba HD processor driver, 1.0.2.71
  -Enecir v. 2.7.4.1 drivers
  -Realtek High definition audio drivers R271
  V battery Bluetooth 8.00.12 (T)
  -VGA Nvidia 320.49 drivers
  -ALPS V8.x0.303.206 drivers for the touchpad
  -Camera assistant software v 1.7.260.0526L (a bit unstable and settings reset every now and then, but always functional.) The most recent camera app couldn't handle the old Chicony)
  -Everything was provided by Windows Update.

  And finally, I used:
  Toshiba 1.00.6626.06 function key, cards Flash 1.51.8.2C (version b) .and v.1.3.3.64 SpecApp.exe (aka the button support)

  The only problem I have is with the touch media buttons. While working as it should and I can remap them with the SpecApp.exe very well, they do a crazy thing:
  Sometimes, as well as the proper functioning of the button will open also calculator of windows which is quite annoying. I tried many things including the search in the registry, but I couldn't find a way to solve it, so if someone could help that would be great.

  Other than this problem, everything works just perfect, including all FN keys.

  Thank you for reading and if you have an idea I'm all ears.

  It is always a challenge to such experiences as new installation OS on an old machine and unsupported. Let's see if someone else with the same machine had success with Win8.

  Anyway, there is always something that will not work correctly. The key is that most of the stuff works well, so if you will not be able to find the solution for touch buttons, in my view, that it's not so bad.

• New power adapter required for Qosmio F50

  Hello

  I need to buy the new adapter for my Qosmio F50 126. The reason being if I try to run more demanding applications on my computer, the entire computer crashes, stops. I need to buy a new adapter before my result of collisions computers together to destroy my HARD drive. I don't know if my battery died or the AC adapter fails to load them up.

  Below the picture of the underside of my adapter.
  https://www.dropbox.com/s/qcrk4fl5bhftbzm/IMG_20131220_215821_454.jpg

  What I want to know if the following two maps are the same and that it would work with my model. I ask this question because the difference in price between the two units is important., 20 USD. Also, I will import it from the USA with the help of an agent here. That's why I need to get it right on the first try.

  I am curious about the connector on the end. I wonder if its the same one that came with the notebook. I believe that it will not be a problem with it clearly said that he accepts my model, Qosmio F50 126

  Another find that according to me is the best and most compatiable.

  This one will work of course but the price is much higher than that mentioned above

  Concerning
  Abdusamed

  + The message was edited: onlineshops link has been removed - ad +.

  I can see either of them belongs to original Toshiba, so in general, you can buy one of them described hope specification is right. In the case that something is not OK you must contact some merchant and file a complaint.

  If you want to have the original Toshiba use sticker Toshiba part number and order the same adapter.

• Qosmio F50 - How can I put the keys Fn and Hotkeys to run on Windows XP?

  Hello.

  I lowered my Qosmio F50-137 to XP, found all the necessary drivers for the hardware recognition, but still looking for Fn keys and keyboard shortcuts work.

  I know (or at least think) that I need to install the "Toshiba Hotkey Utility.

  But this utility requires the "Toshiba common module" for Windows XP must be installed.
  I like the web modules two Commons for Windows XP:
  common_modules_2489A
  and
  common_modules_24895A

  The first says "this software utility does not support this system. Installation will end.
  The other said "the TVALZ driver installation failed."

  How can I do the installation work correctly? or how I do Fn keys and shortcuts keyboard works on my F-50?

  Thanks in advance
  Camusensei

  Hello

  May I ask where you found this common modules for Qosmio F50?
  I checked the page European driver of Toshiba and found only Vista drivers; 32-bit and 64-bit
  There is no drivers Win XP!

  I guess you have tried to install common Modules that are not designed for the F50 series and so this error message appears

• Qosmio F50-12 b - list command installation Driver for Windows 7 64 bit

  Hello

  I need the * driver installation and list order list * of my * QOSMIO F50-12B - PQF55E * for * WINDOWS 7 - 64

  For example:
  Install in order:

  1-chipset utility
  2-value Pack
  3 Touchpad Driver
  ... and so on.

  The required the mailys expert solutions. _

  Thank you.

  Hi kurtb,.

  The "C3PO" user already post the order of installation for Windows 7 64-bit on Qosmio F50. Did you find this thread?
  [http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=210636]
  > {Quote: title = C3PO wrote:}
  >
  >} {quote} - Windows 7
  > - Chipset driver
  > - Storage Manager
  > - Display driver
  > - Driver sound
  > Driver LAN.
  > - WLAN driver
  > - Bluetooth driver
  > - Infrared driver
  > - Utility modem
  > - Driver card reader
  > - Webcam driver
  > - Toshiba Value Added Package
  > Support utility - Toshiba Flash Cards

  And if the FN keys do not work after installing Windows 7 you should check this interesting thread:
  [http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=184578]

• Problem on the Qosmio F50 - 10Z card reader

  I had this problem for a while, he started with the original OS Vista 32-bit, so I decided to buy the cd to upgrade toshiba for windows 7, after the update level, everything worked fine, except for the card reader, regardless of how many times I have installed/uninstalled, installed the driver, it wouldn't work!

  So I used the recovery cd, not once BUT TWICE, and nothing helps I sent to repair.
  I received a message on a piece of paper telling me that it would work on the original operating system, I thought that they had something fixed.
  Then I used the recovery cd AGAIN and to my excitement thrown short to see any yellow explanation points I put a micro sd card (2 GB) that worked when I bought this laptop first and got no response.
  The biggest problem is that my warranty is now closed!, so basically, I've been HIT MORE, cause the memory card slot does NOT WORK and it wasn't a software problem!

  Any reccomendations?

  Hi karimtarek,

  Which driver version you are using on Vista and Windows 7? My Qosmio F50 is running Windows 7 and I m using the version of the driver on Toshiba page 1.00.29.02.
  You use the same version?

  In addition, it would be interesting to know if the SD card has worked once you have received the notebook service center back. Have you tested before or did you start installation recovery immediately?

  Have you tried different brands of SD cards? I always use the SanDisk Extreme cards because they did not no problem.
  In addition, you could try updating the BIOS. Maybe this works if you are using an older version

  Last but not least if it s does not always work and you think that it s a hardware malfunction, ask at the center of service again. If you speak a bit with technicians, maybe they can fix it as a gesture of goodwill.

  Good luck! :)

• TOSHIBA Power Saver for Qosmio F50?

  I am owner of a Qosmio F50-108 and I can't seem to find Power Saver utility from TOSHIBA.

  What is the same thing that the utility options of power on the control panel? I've seen screenshots of power saver utility from Toshiba which is supposed to be delivered pre-installed on their laptops, but the one I saw was on a Qosmio G10.

  The series F50 there as well? If Yes, where can I find it?

  Hello!

  As far as I know that the Qosmio F50 comes with Windows Vista and not XP.

  TOSHIBA Power Saver is only available for Windows XP because Vista has the same functions as energy savings. The energy saving features are now an integral part of Vista.

  I've created an interesting article here in the forum for you:
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=142522

  Good bye

• Qosmio F50-12 b Win7 64 bit driver problems affects Fn, Power Saver, Tablet

  Hello

  I have Toshiba Qosmio F50 - 12 b. initially, I have Vista Ultimate 32 bit, then I refresh installation of Windows 7 Ultimate 64-bit...
  This is the problem,

  I installed all the drivers for my operating system and the computer, but I can not installed or activated FN key, TouchPad, PowerSaver of Toshiba and the keys palpable above the keys of Func/digital as Dolbly, Media Center, Forward, Backward, Mute-, lights-touchpad on - off utility.

  ? also tried vista 64 drivers for these things, but nothing works to them.
  I tried auto updater Toshiba win 7driver tool (tsi4win7.exe), but nothing changes.
  I need help on this situation... Is anyone know how active these utilities, in particular the FN keys and touchpad!

  Thank you...

  I hope that the Toshiba support my voice up and help this time :)

  Hi mate

  The 64-bit value Wi7 package and Support of Flash memory card utility must be installed.
  Flash Card Support utility controls the FN keys and you should install it, after installation of VAP.

  Also the media control buttons should work after the installation of the package value.

• Media bar stopped working on my Qosmio F50-126

  I have a Qosmio F50-126 and bar media (next to the switch) stopped working and answer since I did the cover... the lights in the corners has also stopped working.

  What is the problem?
  Please help me...

  >.. Since I did the recovery
  Can you please explain what do you mean exactly.
  As part of the recovery, I understand you have installed the operating system using recovery Toshiba installation image and now you're using your laptop with the factory settings. Am I right about that?

  Have you can be installed some additional software or Windows updates?

  I mean question like what is the problem is pretty funny?
  Can you imagine I ask follow you: I can't start my car, what is the problem?
  What you can say about it, not much. Just speculating what may be the reason.

  If possible, reinstall the OS and test it immediately without having to install additional stuff. It should work well.

• Qosmio F50 - Fn + F8 does not

  Hi all

  I have a Qosmio F50 - 10Z. Everything worked fine when I got first it - a couple of years now. But at some point the fn + F8 rocking has stopped working so that it can no longer use the wireless connection.

  He used to switch between the different symbols, I would choose "All On" and he would happily link. No symbols appear now, so I can't connect wirelessly. The wireless forward button left of the laptop working (turned on) and sometimes, if I do a reboot to safe mode, it can connect wireless on its own.

  You can probably guess I am quite technical, although I tried a lot of things on the net, I'm puzzled. If anyone has any advice, I would be very grateful, it's driving me potty stuck upstairs in the back room!

  p.s. the other fn keys work

  Hello

  As you probably know n t, the VAP (value added package) and the Support of Flash Card Utility control the FN keys.
  I recommend first to refresh the memory Flash Card Support utility.
  Go to start-> all programs-> Toshiba-> Card Support Flash Utility-> restart

  If this does not work, reinstall the Flash Card Utility Support

  Good luck