ASCIISTR function that gives different results

Similar Questions

• Flatten channel gives different results on a RT system compared to a Windows system?

  When I flatten a structure moderately complex to a string in LabVIEW Windows, I get a slightly different result than when I do the same thing (interactive) Looking RT. LabVIEW to hexadecimal display produced channels, towards the tail end of the strings that I see:

  Windows: A 999, 0000. FB99 A 9999 9999 9999 9, 00
  RT: 9999 A000... FB99 9999 9999 99A 0 0000

  Shouldn't get the same value of the two systems?

  Your problem is the use of the extended data type.  I don't have a cRIO to do more thorough testing, but the only items that do not match are the two elements of smoothing.  The two values differ by about - 5.54976E - 18 (that is to say, not much - less, in fact, the value of epsilon machine).  If you use the context-sensitive help and hover on an EXT thread, you'll see a note indicating the precision varies by platform, so it must be provided.  Also documented A in aid, under the heading "digital, data types table.  Is there a reason why a double precision is not sufficient?

• function that limits the result?

  Hello, I am trying to write a calculation that CAP the deduction lead after reaching a certain number, in this case $50. For example:

  -Rate of pay is $25 / hour and annualization is 2080

  .0125 * ((Pay_Rate * Annual_Hours) / 26) = $25 deduction

  -Rate of pay is $50 / hour and annualization is 2080

  .0125 * ((Pay_Rate * Annual_Hours) / 26) = $50 deduction

  -Rate of pay is $75 / hour and annualization is 2080

  .0125 * ((Pay_Rate * Annual_Hours) / 26) = deduction of50 $

  Is there a 'Limit' function that will work in this formula?

  Thanks for your help,

  Chris

  Hello Chris,

  If I understand correctly you want the function LESS.

  LESS (n1, n2 [,...] *) = smaller of numbers n1, n2,...
  Thus, for example:

  SELECT LESS (Pay_Rate * Annual_Hours / 2080)

  50

  )

  ...

  give your calculation if less than 50 and 50 otherwise
  (I rewrote your calculation is equivalent but deleting the unnecessary parentheses and grouping "* 0.0125" and "/ 26" ")

  (Note: the "opposed" LESS is MORE)

  HTH,

  Bruno Vroman.

• Function that returns the results of a select statement

  Hello
  
  I would like to create a feature on the famous HR Departments oracle table to select * from him. I don't know how to do it.
  
  Is someone can help me?.
  
  Thank you

  Oracle stored functions cannot return result sets directly but can return the REF CURSOR. Please read [optimize result set retrieval using ODP.NET and Ref Cursor | http://www.oracle.com/technology/pub/articles/mastering_dotnet_oracle/williams_refcursors.html] which gives complete examples in PL/SQL for the side Server and VB. NET client side.

• simulation of the same in different versions of multisim circuit design give different results

  version of Multisim 10.0, PATTERN16T GIVES RESULTS on... DISPLAYSA2A20000A2A20000AAAA0000AAAA0000...

  MULTISIM 10.1 VERISION, PATTERN16T RESULTS ON

  POSTER A3A30000A3A30000A3A30000...

  EACH PROGRAM MULTISIM, USE THE SAME CIRCUIT FOR ANALYSIS.

  MULTISIM 10.0 VERSION GIVES A CORRECT RESULT.

  YOU MAY NEED TO CHECK THE NEW VERSION OF THIS PROBLEM

  WITH THE VERSION OF MULTISIM 10.0.

  RICHARD RUHL

  Hello

  Could you please attach your additional troubleshooting circuits? What is your operating system?

  Kind regards

• Same calculation in drag and drop gives different results

  I use jqueryUI drag / move to drag an object (ventil_roerHANDLE) on the X axis, then I have another object (ventil_roer) which is repositioned according to the first Positron objects x and I do a calculation to determine to what extent on the Y axis, that the second object must move.

  When I calculate in drag calculation is a bit, but when I do the same calculation in service drop, that's correct - indices of Ant as on why?

  I now reposition the second object again the service drop to get it to where it should be, causing it to 'jump' a bit when dropped

  Link to the project: Vasskrafta - interaktivt kraftverk

  Click on one of the two small grey houses, and then drag it onto the black valve with the green arrows

  Here is the code for

  SYM. .draggable (//MAGASINKRAFTVERK $('ventil_roerHANDLE')

  {

  containment: container,.

  axis: 'x ',.

  Snap: "draggableArea."

  SNAPMODE: "internal."

  snapTolerance: 10,.

  Drag: function (event, ui)

  {

  If (sym. MyGlobalVar_startPosition_mag == 0)

  {

  SYM. MyGlobalVar_startPosition_mag = 1;

  SYM. MyGlobalVar_yStartPosition = Math.round (sym.$('ventil_roerHANDLE').position () .top);

  SYM. MyGlobalVar_xStartPosition = Math.round (() .left sym.$('ventil_roerHANDLE').position);

  SYM. MyGlobalVar_yPrevPosition = Math.round (sym.$('ventil_roerHANDLE').position () .top);

  SYM. MyGlobalVar_xPrevPosition = Math.round (() .left sym.$('ventil_roerHANDLE').position);

  }

  utregninger for a posisjonere den visible hit

  var which = Math.round (sym.$('ventil_roerHANDLE').position () .left);

  var xPositionCopy = Math.round (() .left sym.$('ventil_roer').position);

  var yPositionCopy = Math.round (sym.$('ventil_roer').position () .top);

  var xPosChange = xPositionCopy - which;

  var yPosChange = xPosChange * 0.48;

  var newXPos = Math.round (() .left sym.$('ventil_roerHANDLE').position);

  var newYPos = Math.round ((sym.$('ventil_roer').position () .top) - yPosChange);

  SYM. MyGlobalVar_newYPos = newYPos;

  SYM. MyGlobalVar_newXPos = newXPos;

  () .css sym. $('ventil_roer')

  {

  'left': newXPos,

  'top': newYPos

  });

  }

  SYM. .droppable (//MAGASINKRAFTVERK $('draggableArea')

  {

  tolerance: "touch."

  Drop: function()

  {

  utregninger for a posisjonere den usynlige hit

  var which = Math.round (sym.$('ventil_roerHANDLE').position () .left);

  var xPositionCopy is sym. MyGlobalVar_xPrevPosition;

  var xPosChange = xPositionCopy - which;

  var yPosChange = xPosChange * 0.48;

  var newXPos = Math.round (() .left sym.$('ventil_roerHANDLE').position);

  var newYPos = Math.round ((sym.$('ventil_roerHANDLE').position () .top) - yPosChange);

  Bytt topp posisjon pa den usynlige hit (HANDLE)

  () .css sym. $('ventil_roerHANDLE')

  {

  'top': newYPos

  });

  reset the prev X og Y posisjoner

  SYM. MyGlobalVar_xPrevPosition = Math.round (() .left sym.$('ventil_roerHANDLE').position);

  SYM. MyGlobalVar_yPrevPosition = Math.round (sym.$('ventil_roerHANDLE').position () .top);

  Flytt til posisjon handles hit

  () .css sym. $('ventil_roer')

  {

  'left': sym. MyGlobalVar_xPrevPosition,

  'top': sym. MyGlobalVar_yPrevPosition

  });

  }

  and sometimes, all you need is a good night's sleep

  a couple of the Math.round () were the culprits... the removed from the places where I am retreving positions and his animation very smoothly

• Copy and paste the code which gives different results

  I use PS CS5 and need to copy and paste the code from one page to another. The reason is that the only difference is a change in the images and titles.

  When I view the page copied in a browser the table continues beyond the wrapper div and none of the images are visible.

  Here is the copied code:

  <! DOCTYPE HTML > < html lang = "en" >

  < html >

  Head of <>< name meta = "robots" content = "INDEX, FOLLOW" / >

  < name meta = "robots" content = "noimageindex" / >

  < name meta = "description" content = "Ace with checkered flag logo" / >

  < name meta = "keywords" content = "Top Trumps, Ace, flag at checkerboard, Classic Cars, drag racing, heavy trucks, 500 miles of Indianapolis, International bus, luxury cars, luxury cars Made in Germany, Yachts of luxury, the NASA Super Jets, cars, Rolls-Royce, Street Bikes, street cruisers, Super-Bikes, Super Sonics, Super Trains in the world." / >

  < title > < /title > checkered flag

  < link href = "css/table.css" rel = "stylesheet" type = "text/css" media = "screen" > "

  < / head >

  < div id = 'wrapper' >

  < body >

  < div id = "bread crumbs" >

  < a title = "Return to Homepage" href = "index.html" > home < /a > & bull; < a title = "Go back to index of England" href = "england.html" > English Top Trumps < /a > & bull; "< a title ="Back to Ace Index"href ="... /... ' / index.html - ace "> Ace Index < /a >

  < / div >

  < div id = "banner logo" >

  "< img src ="... /... / images/title.jpg ">"

  < / div >

  < div id = "page title" > < flag checkerboard of h1 > < / h1 > < / div >

  < div id = "table" align = "center" >

  < table >

  < thead >

  < b >

  < th = "column" range > Classic Cars < /th >

  < th = "column" scope > < /th > Dragster

  < th = "column" scope > < /th > trucks

  < th = "column" scope > Indianapolis 500 < /th >

  < th = "column" scope > International bus < /th >

  < /tr >

  < / thead >

  < tbody >

  < b >

  < td > < img title = "cars classic Ace assets with the checkered flag" src = "images/futbol_yildizlari.gif" > < table >

  < td > < img title = "Dragster Ace assets with the checkered flag" src = "images/HP-ve - zumruduanka.gif" > < table >

  < td > < img title = "Trucks heavy Ace assets with the checkered flag" src = "images/hp_ve_ateskadehi.gif" > < table >

  < td > < img title = "Indianaplis 500 Ace assets with the checkered flag" src = "images/karayip_korsanlari.gif" > < table >

  "< td > < img title ="Bus International Ace assets with the checkered flag"src ="... /... / images/international_buses_ace.gif ' > < table >.

  < /tr >

  < b >

  < td > click on the < table > image

  < td > click on the < table > image

  < td > click on the < table > image

  < td > click on the < table > image

  < td > click on the < table > image

  < /tr >

  < / tbody >

  < thead >

  < b >

  < th = "column" scope > luxury car < /th >

  < th = "column" scope > luxury cars Made in Germany < /th >

  < th = "column" scope > < /th > Luxury Yachts

  < th = "column" scope > the NASA Super Jets < /th >

  < th = "column" scope > race cars < /th >

  < /tr >

  < / thead >

  < tbody >

  < b >

  "< td > < img title ="Luxury cars Ace assets with the checkered flag"src ="... /... /images/luxury-cars-ACE.gif' > < table >

  "< td > < img title ="Cars luxury Made in Germany Ace assets with the checkered flag"src ="... /... / images/Lux_Cars_Made.gif ' > < table >.

  "< td > < img title ="Luxury Yachts"src ="... /... / images/Luxury_Yachts.gif ' > < table >.

  "< td > < img title ="NASA Super Jets Ace with checkered flag"src ="... /... /images/NASA_Super-Jets_Ace.gif' > < table >

  "< td > < img title = 'Race Cars Ace with checkered flag' src = '... /... / images/Race_Cars.gif ' > < table >.

  < /tr >

  < b >

  < td > click on the < table > image

  < td > click on the < table > image

  < td > click on the < table > image

  < td > click on the < table > image

  < td > click on the < table > image

  < /tr >

  < / tbody >

  < /table >

  < / div >

  < div id = 'foot' >

  & copy; 2005-2016 Ultimate Top Trumps. All rights reserved < / div >

  < / body >

  < / html >

  Thanks in advance.

  At first glance, I see that you have a wrapper

  before the openingtag. You can't do that.

  Run the validator at http://validator.w3.org/nu for a list of your html of your page errors. Clean and your page should work fine.

• Select on ALL_TABLES gives different results (SQL vs PROCEDURE)

  Hello
  
  I am connected with the user and I ran this SQL:

  SELECT COUNT(*)
  FROM ALL_TABLES
  WHERE Table_Name = 'SRMD'
  AND Owner = 'DMI';

  The count() returns the value 1.
  
  Then, I created a procedure called TestAllTables with exactly the same statement:

  CREATE OR REPLACE PROCEDURE A.TestAllTables(p_Table IN VARCHAR2, p_Schema IN VARCHAR2) IS
    l_Nb  NUMBER;
   
  BEGIN
    SELECT COUNT(*) 
    INTO l_Nb
    FROM ALL_TABLES
    WHERE Table_Name = p_Table
      AND Owner = p_Schema;
      
    IF l_Nb = 0 THEN 
      dbms_output.put_line('KO !');
    ELSE
      dbms_output.put_line('OK...');
    END IF;
  END;

  .. .and I ran, it is always connected to A:

  BEGIN
      TestAllTables('SRMD','DMI');
  END;
  /

  .. .and it gives me this incomprehensible error: KO!
  
  Please can someone explain to me why?
  
  Thks.

  Your access to the table of dmi.smrd was granted by a role.

  If you want the query "ALL_TABLES" rights of a stored procedure DEFINER and see this table, you must have administrative privileges on the table given directly to you, rather than having acquired them via a role. The DBA or the owner of the table need run

  GRANT SELECT ON dmi.smrd TO <>
  

  Once they do this, the query will return a line even when you ran ' set no role ' and your procedure will be able to see the table.

  Justin

• using the same search terms on ebay, getting different results on firefox exploer

  using the same words to search on ebay for internet explorer, I get results more when I use ebay on FireFox > is cutting some of the results when using Firefox

  It is always possible that eBay is to differentiate between browsers and gives different results, based on previous visits.
  You can try to delete cookies in two browsers to see if it has an impact.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

• same query gives a different result under 2 different schema.

  Hello
  I have a query that shows two different results under 2 different schema.
  Here's the code.
  
  SELECT ssbsect_term_code, ssbsect_crn, ssbsect_seq_numb,
  SUBSTR (f_active_section_ind (ssbsect_ssts_code), 1, 1),
  SUBSTR (f_active_course_ind (a.scbcrse_csta_code), 1, 1),
  SUBSTR (f_check_for_course_coreqs, (ssbsect_subj_code,
  ssbsect_crse_numb,
  ssbsect_term_code
  ),
  1,
  1
  ),
  SUBSTR (f_check_for_course_prereqs, (ssbsect_subj_code,
  ssbsect_crse_numb,
  ssbsect_term_code,
  ''
  ),
  1,
  1
  ),
  SUBSTR (f_check_for_section_coreqs (ssbsect_term_code, ssbsect_crn),
  1,
  1
  ),
  SUBSTR (f_check_for_section_prereqs, (ssbsect_term_code,
  ssbsect_crn,
  ''
  ),
  1,
  1
  ),
  a.scbcrse_eff_term, a.scbcrse_coll_code, a.scbcrse_dept_code,
  SUBSTR (f_get_course_levels, (ssbsect_subj_code,
  ssbsect_crse_numb,
  ssbsect_term_code,
  1
  ),
  1,
  2
  ),
  SUBSTR (f_get_course_levels, (ssbsect_subj_code,
  ssbsect_crse_numb,
  ssbsect_term_code,
  2
  ),
  1,
  2
  ),
  SUBSTR (f_get_course_levels, (ssbsect_subj_code,
  ssbsect_crse_numb,
  ssbsect_term_code,
  3
  ),
  1,
  2
  ),
  SUBSTR (f_get_course_levels, (ssbsect_subj_code,
  ssbsect_crse_numb,
  ssbsect_term_code,
  4
  ),
  1,
  2
  ),
  
  a.scbcrse_divs_code, ssbsect_subj_code, ssbsect_crse_numb,
  a.scbcrse_ceu_ind, a.scbcrse_csta_code,
  NVL (ssbsect_credit_hrs, a.scbcrse_credit_hr_low),
  a.scbcrse_credit_hr_low, a.scbcrse_credit_hr_high,
  a.scbcrse_credit_hr_ind,
  NVL (ssbsect_bill_hrs, a.scbcrse_bill_hr_low),
  a.scbcrse_bill_hr_low, a.scbcrse_bill_hr_high,
  a.scbcrse_bill_hr_ind, ssbsect_ssts_code, ssbsect_camp_code,
  NVL (ssbsect_gmod_code,
  SUBSTR (f_default_gmod, (ssbsect_subj_code,
  ssbsect_crse_numb,
  ssbsect_term_code
  ),
  1,
  1
  )
  ),
  NVL (ssbsect_crse_title, a.scbcrse_title), ssbsect_sapr_code,
  ssbsect_census_enrl, ssbsect_census_enrl_date,
  ssbsect_census_2_enrl, ssbsect_census_2_date, ssbsect_proj_enrl,
  ssbsect_max_enrl, ssbsect_enrl, ssbsect_seats_avail,
  ssbsect_ptrm_code, ssbsect_ptrm_start_date, ssbsect_ptrm_end_date,
  ssbsect_link_ident, k.ssrmeet_begin_time, k.ssrmeet_end_time,
  k.ssrmeet_bldg_code, k.ssrmeet_room_code, k.ssrmeet_schd_code,
  k.ssrmeet_mon_day, k.ssrmeet_tue_day, k.ssrmeet_wed_day,
  k.ssrmeet_thu_day, k.ssrmeet_fri_day, k.ssrmeet_sat_day,
  k.ssrmeet_sun_day, l.ssrmeet_begin_time, l.ssrmeet_end_time,
  l.ssrmeet_bldg_code, l.ssrmeet_room_code, l.ssrmeet_schd_code,
  l.ssrmeet_mon_day, l.ssrmeet_tue_day, l.ssrmeet_wed_day,
  l.ssrmeet_thu_day, l.ssrmeet_fri_day, l.ssrmeet_sat_day,
  l.ssrmeet_sun_day, m.ssrmeet_begin_time, m.ssrmeet_end_time,
  m.ssrmeet_bldg_code, m.ssrmeet_room_code, m.ssrmeet_schd_code,
  m.ssrmeet_mon_day, m.ssrmeet_tue_day, m.ssrmeet_wed_day,
  m.ssrmeet_thu_day, m.ssrmeet_fri_day, m.ssrmeet_sat_day,
  m.ssrmeet_sun_day, n.ssrmeet_begin_time, n.ssrmeet_end_time,
  n.ssrmeet_bldg_code, n.ssrmeet_room_code, n.ssrmeet_schd_code,
  n.ssrmeet_mon_day, n.ssrmeet_tue_day, n.ssrmeet_wed_day,
  n.ssrmeet_thu_day, n.ssrmeet_fri_day, n.ssrmeet_sat_day,
  n.ssrmeet_sun_day, o.ssrmeet_begin_time, o.ssrmeet_end_time,
  o.ssrmeet_bldg_code, o.ssrmeet_room_code, o.ssrmeet_schd_code,
  o.ssrmeet_mon_day, o.ssrmeet_tue_day, o.ssrmeet_wed_day,
  o.ssrmeet_thu_day, o.ssrmeet_fri_day, o.ssrmeet_sat_day,
  o.ssrmeet_sun_day, p.ssrmeet_begin_time, p.ssrmeet_end_time,
  p.ssrmeet_bldg_code, p.ssrmeet_room_code, p.ssrmeet_schd_code,
  p.ssrmeet_mon_day, p.ssrmeet_tue_day, p.ssrmeet_wed_day,
  p.ssrmeet_thu_day, p.ssrmeet_fri_day, p.ssrmeet_sat_day,
  p.ssrmeet_sun_day, q.ssrmeet_begin_time, q.ssrmeet_end_time,
  q.ssrmeet_bldg_code, q.ssrmeet_room_code, q.ssrmeet_schd_code,
  q.ssrmeet_mon_day, q.ssrmeet_tue_day, q.ssrmeet_wed_day,
  q.ssrmeet_thu_day, q.ssrmeet_fri_day, q.ssrmeet_sat_day,
  q.ssrmeet_sun_day, r.ssrmeet_begin_time, r.ssrmeet_end_time,
  r.ssrmeet_bldg_code, r.ssrmeet_room_code, r.ssrmeet_schd_code,
  r.ssrmeet_mon_day, r.ssrmeet_tue_day, r.ssrmeet_wed_day,
  r.ssrmeet_thu_day, r.ssrmeet_fri_day, r.ssrmeet_sat_day,
  r.ssrmeet_sun_day, s.ssrmeet_begin_time, s.ssrmeet_end_time,
  s.ssrmeet_bldg_code, s.ssrmeet_room_code, s.ssrmeet_schd_code,
  s.ssrmeet_mon_day, s.ssrmeet_tue_day, s.ssrmeet_wed_day,
  s.ssrmeet_thu_day, s.ssrmeet_fri_day, s.ssrmeet_sat_day,
  s.ssrmeet_sun_day, t.ssrmeet_begin_time, t.ssrmeet_end_time,
  t.ssrmeet_bldg_code, t.ssrmeet_room_code, t.ssrmeet_schd_code,
  t.ssrmeet_mon_day, t.ssrmeet_tue_day, t.ssrmeet_wed_day,
  t.ssrmeet_thu_day, t.ssrmeet_fri_day, t.ssrmeet_sat_day,
  t.ssrmeet_sun_day, T1.ssrmeet_begin_time, t1.ssrmeet_end_time,
  T1.ssrmeet_bldg_code, t1.ssrmeet_room_code, t1.ssrmeet_schd_code,
  T1.ssrmeet_mon_day, t1.ssrmeet_tue_day, t1.ssrmeet_wed_day,
  T1.ssrmeet_thu_day, t1.ssrmeet_fri_day, t1.ssrmeet_sat_day,
  T1.ssrmeet_sun_day, e1.ssrattr_attr_code, e2.ssrattr_attr_code,
  
  SUBSTR (f_more_attributes, (scbcrse_subj_code,
  scbcrse_crse_numb,
  scbcrse_eff_term
  ),
  1,
  1
  ),
  x.spriden_id, NVL (x.spriden_last_name, 'STAFF'),
  x.spriden_first_name, SUBSTR (x.spriden_mi, 1, 1), y.spriden_id,
  y.spriden_last_name, y.spriden_first_name,
  SUBSTR (y.spriden_mi, 1, 1), z.spriden_id, z.spriden_last_name,.
  z.spriden_first_name, SUBSTR (z.spriden_mi, 1, 1),
  DECODE (u.spriden_pidm, NULL, 'n', 'Y'), ssbovrr_coll_code,
  ssbovrr_divs_code, ssbovrr_dept_code, f1.scrschd_schd_code,
  F1.scrschd_workload, f1.scrschd_max_enrl, f1.scrschd_adj_workload,
  F2.scrschd_schd_code, f2.scrschd_workload, f2.scrschd_max_enrl,
  F2.scrschd_adj_workload, f3.scrschd_schd_code, f3.scrschd_workload,
  F3.scrschd_max_enrl, f3.scrschd_adj_workload, f4.scrschd_schd_code,
  F4.scrschd_workload, f4.scrschd_max_enrl, f4.scrschd_adj_workload
  Scbcrse a.,
  ssbovrr,
  spriden x,
  spriden,
  ssrmeet k,
  ssrmeet l,
  ssrmeet m,
  ssrmeet n,
  ssrmeet o,
  ssrmeet p,
  ssrmeet q,
  ssrmeet r,
  s ssrmeet,
  ssrmeet t,
  ssrmeet t1,
  scrschd f1,
  scrschd f2,
  scrschd f3,
  scrschd f4,
  ssrattr e1,
  ssrattr e2,
  spriden z,
  spriden u,
  ssbsect
  WHERE x.ROWID (+) =
  f_get_instr_spriden_rowid (ssbsect_crn,
  ssbsect_term_code,
  « Y »,
  ''
  )
  AND y.ROWID (+) =
  f_get_instr_spriden_rowid (ssbsect_crn, ssbsect_term_code, ', 1).
  AND z.ROWID (+) =
  f_get_instr_spriden_rowid (ssbsect_crn, ssbsect_term_code, ', 2)
  AND u.ROWID (+) =
  f_get_instr_spriden_rowid (ssbsect_crn, ssbsect_term_code, cm, 3)
  AND ssbovrr_term_code (+) = ssbsect_term_code
  AND ssbovrr_crn (+) = ssbsect_crn
  AND a.scbcrse_subj_code = ssbsect_subj_code
  AND a.scbcrse_crse_numb = ssbsect_crse_numb
  AND a.scbcrse_eff_term =
  (SELECT MAX (b.scbcrse_eff_term)
  OF scbcrse b
  WHERE b.scbcrse_subj_code = ssbsect_subj_code
  AND b.scbcrse_crse_numb = ssbsect_crse_numb
  AND b.scbcrse_eff_term < = ssbsect_term_code)
  AND k.ROWID (+) =
  gvsuowner.f_get_ssrmeet_rowid_js (ssbsect_term_code,
  ssbsect_crn,
  1
  )
  AND l.ROWID (+) =
  gvsuowner.f_get_ssrmeet_rowid_js (ssbsect_term_code,
  ssbsect_crn,
  2
  )
  AND m.ROWID (+) =
  gvsuowner.f_get_ssrmeet_rowid_js (ssbsect_term_code,
  ssbsect_crn,
  3
  )
  AND n.ROWID (+) =
  gvsuowner.f_get_ssrmeet_rowid_js (ssbsect_term_code,
  ssbsect_crn,
  4
  )
  AND o.ROWID (+) =
  gvsuowner.f_get_ssrmeet_rowid_js (ssbsect_term_code,
  ssbsect_crn,
  5
  )
  AND p.ROWID (+) =
  gvsuowner.f_get_ssrmeet_rowid_js (ssbsect_term_code,
  ssbsect_crn,
  6
  )
  AND q.ROWID (+) =
  gvsuowner.f_get_ssrmeet_rowid_js (ssbsect_term_code,
  ssbsect_crn,
  7
  )
  AND r.ROWID (+) =
  gvsuowner.f_get_ssrmeet_rowid_js (ssbsect_term_code,
  ssbsect_crn,
  8
  )
  AND s.ROWID (+) =
  gvsuowner.f_get_ssrmeet_rowid_js (ssbsect_term_code,
  ssbsect_crn,
  9
  )
  AND t.ROWID (+) =
  gvsuowner.f_get_ssrmeet_rowid_js (ssbsect_term_code,
  ssbsect_crn,
  10
  )
  
  AND t1. ROWID (+) =
  gvsuowner.f_get_ssrmeet_rowid_js (ssbsect_term_code,
  ssbsect_crn,
  11
  )
  
  AND f1. ROWID (+) =
  f_get_scrschd_rowid (ssbsect_subj_code,
  ssbsect_crse_numb,
  ssbsect_term_code,
  1
  )
  AND f2. ROWID (+) =
  f_get_scrschd_rowid (ssbsect_subj_code,
  ssbsect_crse_numb,
  ssbsect_term_code,
  2
  )
  AND f3. ROWID (+) =
  f_get_scrschd_rowid (ssbsect_subj_code,
  ssbsect_crse_numb,
  ssbsect_term_code,
  3
  )
  AND f4. ROWID (+) =
  f_get_scrschd_rowid (ssbsect_subj_code,
  ssbsect_crse_numb,
  ssbsect_term_code,
  4
  )
  AND e1.ssrattr_term_code (+) = ssbsect_term_code
  AND e1.ssrattr_crn (+) = ssbsect_crn
  AND e1.ssrattr_attr_code (+) = "SWS".
  AND e2.ssrattr_term_code (+) = ssbsect_term_code
  AND e2.ssrattr_crn (+) = ssbsect_crn
  AND e2.ssrattr_attr_code (+) LIKE '% TM ";
  
  Thank you

  user3367455 wrote:
  Hello
  I have a query that shows two different results under 2 different schema.

  Hello

  Different how?

  -Different number of records, please run this and show us what you get:

  select owner, object_name, object_type
    from dba_objects
   where object_name in
       ('SCBCRSE',
        'SCRSCHD',
        'SPRIDEN',
        'SSBOVRR',
        'SSBSECT',
        'SSRATTR',
        'SSRMEET',
        'F_GET_INSTR_SPRIDEN_ROWID',
        'F_GET_SSRMEET_ROWID_JS')
  order by object_name;
  

  If different values in some records, also include all functions in your selection list.

  Concerning
  Peter

• Why Express PSD gives a different result of amplitude as FFT PSD?

  Hello

  When I use the express VI of spectral measures to trace the power spectral density, I get a different result than when using the FFT PSD VI. The data are the same but the amplitudes are different in the PSD plot. Everyone comes through this?

  Thank you

  Donners,

  The PSD2 and graphic PSD2 are different because you are breastfeeding two extra points in the tables (t0, df). When graphic entry of data in the tables, they interpret not automatically information of t0 and df.  Actually they do not yet receive this information.  You must program the scales with nodes of property.  If you simply draw the order of magnitude, the spectra are very similar.

  

  ^ ^ ^ This confuses only the chart!

  The spectral forms differ slightly as the power spectrum of FFT and PSD.vi uses a default Hanning window.

  Lynn

• ActionScript gives 1024 custom skin: a function that is not marked for substitution substitution

  I am trying to create an appearance in actionscript. When I put the HostComponent metadata on top of the compoiler class provides actionscript 1024: a function that is not marked for the substitution of alternative.

  package skins
  {
  Import spark.components.supportClasses.Skin;

  [HostComponent ("spark.components.BorderContainer")]
  [The States ("normal", "disabled")]
  SerializableAttribute public class TestSkin extends skin
  {
  public void TestSkin()
  {
  Super();
  }
  }
  }

  use:

  < s:BorderContainer skinClass = 'skins. TestSkin "/ >"

  What I am I missing here is nothing to this...

  10 x,

  Claudiu

  Claudiu salvation,

  I think that you are currently running on this known issue: http://bugs.adobe.com/jira/browse/SDK-25312

  -Kevin

• Different results from the the DLL source code

  Hi all

  I'm new to this forum and also to labview so understandable...

  Then, I got a source project with many under vi of that graphic plots of excel files. I also got the exe after generation.

  The problem is, if I try to compile this project again, the exe gives me different results than what I already have. They should be the same, because I does no update in the source code.

  Can someone explain this behavior? I don't know anything about how it has been made because the guy who create this left the office... I need to make a few updates, but first of all, I have to build corectly.

  Thank you

  Have you compared the date of the exe file with the date of the source code? Are you absolutely sure that no changes have been made to the source code after the build? The construction specifications are part of the project. Unless you changed something there, builds should be the same.

  You have the source code control? Issues like this should not be a if you make and use wisely.

• Why can I get two different results from the same coefficients?

  I get two different results of the evaluation of the polynomial function.

  For the first, I get the coefficients of a polynomial function to adapt.  I feed the coefficients of the function made the function Eval Poly and get the correct 12.8582 result when I evaluate 49940.

  For the second, I create constant array of values that have been returned by the polynomial Fit function (I typed in).  However, I get an incorrect result of - 120.7913 when I feed the constant table the function Eval Poly when I evauate 49940.

  How this can happen when I use the same values in table?

  A picture of what I explained is attached.

  Hi Altran,

  are you sure about using the 'same '?

  You compare them? Do you have (at least) set them to 17 digits display properties?

  Please attach a VI instead of an image...

• Updated Windows - you can do a typical upgrade using an installation disc that's different from the language...

  Hello, I'm Michael.

  I'm a guy who lives in Hong Kong, I bought a laptop that comes with Chinese traditional x 64 Windows 7 Home Preium. I want to use this laptop as a computer professional. Because I don't want to use Chinese as my default language in my computer, so I'm going to upgrade my computer I have subscribed the TechNet, so I downloaded an iso file from the Microsoft TechNet Web site. I downloaded an English x 64 to windows 7 Ultimate. I hope it would work, but an error message is skipped during the upgrade. It is said: you can do an upgrade using an installation disc that's different from the language installed on your computer. Go online to see how to install Windows 7 and keep your files and settings.
  I tried to press the hyperlink (go online) and it does not at all. I have to ask this question to the Microsoft Answers and see if if anyone can give come me advice because I do not want to click on the custom button because there are some files saved in my computer. So I need answers as soon as possible because I could die without a PC! Thanks for all those who read this and you time.

  No direct path to the evolution of the Chinese language to English. But you can upgrade your version of Home Premium to Windows 7 Ultimate (upgrade Express). Ultimate has support for English and a number of other languages.

  Amazon: http://www.amazon.com/Microsoft-Windows-Anytime-Upgrade-Ultimate/dp/B002JZ1QWA/ref=sr_1_3?s=software&ie=UTF8&qid=1362231885&sr=1-3&keywords=Microsoft+Windows+7+Anytime+Upgrade

  =================================================

  If you have a retail version of Windows 7, then use the "Anytime Upgrade":
  When you use the "Anytime Upgrade" option, all what you need to do is enter the product Windows 7 upgrade key has been purchased. Do this by clicking on: start/search and enter: upgrade Express

  Upward to a more powerful edition
  http://www.Microsoft.com/Windows/Windows-7/get/anytime-upgrade/Home-Premium.aspx

  Upgrade to another edition of Windows 7 by using Windows Anytime Upgrade
  http://Windows.Microsoft.com/en-us/Windows7/upgrade-to-another-edition-of-Windows-7-by-using-Windows-Anytime-Upgrade

  A 'step by step' to go through an upgrade to a lower edition of Windows 7 to a higher edition of Windows 7:
  http://windowsteamblog.com/blogs/Windows7/pages/the-Windows-Anytime-Upgrade-experience-for-Windows-7.aspx

  Paths to upgrade Windows 7 (supported upgrade scenarios)
  http://TechNet.Microsoft.com/en-us/library/dd772579%28WS.10%29.aspx

  Windows Anytime Upgrade is supported only in the following countries:
  Australia, Belgium, Canada, France, Germany, Italy, Japan, Netherlands,
  Spain, Sweden, Switzerland, United Kingdom and United States

  Windows 7 Starter to Professional upgrade Express
  http://www.Microsoft.com/Windows/buy/Windows-7-upgrade-Starter-to-professional.aspx

  Most likely the best option and the most popular will be the Home Premium upgrade to Windows 7 Professional, which includes Windows XP Mode. The extra $50.00 for Windows 7 Ultimate will only give you two additional features, bitlocker (for security) and the ability to switch between any of 35 languages.

  Windows 7 - Anytime Upgrade - frequently asked Questions:
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Anytime-Upgrade-frequently-asked-questions

  Windows 7 - upgrade Express features:
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-Anytime-Upgrade

  Windows 7 - version comparisons:
  http://Windows.Microsoft.com/en-us/Windows7/products/compare-editions

  MS Windows 7 store price:
  http://www.microsoftstore.com/Store?defaultKeyword=Search&siteid=msstore&action=list&CategoryID=38336300&Keywords=Anytime+Upgrade&result=

  Note: Retail 'Full' or 'Upgrade' product keys will work when you use the Express Upgrade feature.
  The Express Upgrade "may" not always work for users who have system integrators and or OEM product keys, this applies also to VL (Volume License), MSDNAA or key teaching will not work with the Express upgrade. KMS users consult your administrator before attempting to perform an Express upgrade.

  J W Stuart: http://www.pagestart.com