PAP pushing against RIM Push

Similar Questions

• Pushing data from a Java application * confused *.

  Hello community,

  I'm new to the BlackBerry Push. I tried to understand what options are available to provide data to a Java application and how it can be tested.

  There are so many documents on this subject, for example:

  1. Push for the BlackBerry Enterprise Server software
  2. BlackBerry Push service
  3. Push blackBerry SDK service

  What I discovered thanks to these documents.

  1. There are two formats that can be used to send data through the BES (PAP push / push RIM)
  2. BlackBerry Push service has two levels (BB push Essentials / BB push more - limited to 8 KB content)
  3. In the Push Service SDK, there are two modes available (public and business mode)

  For me, these information are really confusing.

  What I don't understand:

  I. can the software of the BlackBerry Push Service SDK be used for both options 1. & 2. mentioned above? (referring to public and business mode)

  II. is there documentation how to push Service SDK can be configured for the mode of the company?

  III. when you use BES Push is also limited to 8 KB content size?

  IV. is it possible to only a single client application that can be used to BES and BIS push?

  Thanks in advance.

  I. the SDK can be used to push either a BIS or BES. The SDK has a setting to determine if its pressure through the (public) BIS or BES (company). The SDK can be used to push push Essentials or Plush Push. The SDK software uses the API of PAP.

  II. I'm not sure of the documentation, but I don't know that the SDK can ask a BES for sure. But in the end, you need to set the PushSDK.properties flag to push public were false.

  III. no the BES is not a limitation of 8 k.

  IV. I'm not an expert on client applications, but I think you need to develop a version for BIS and a version for BES.

• Loading paper message

  Hi all

  as a few others mentioned here as well, I get the message that I need to load paper when there is paper inside. I took and put the back paper, pressed against the back gently. The sides are pressed against the paper as well.

  I turned the printer off and on after 1 minute. Did not help.

  Strange thing is, when I turn it on, it gives me an impression on a faulty alignment (with all the colors on this subject). It is therefore able to find the paper at this time.

  My printer is a 8500 more all-in-One.

  Suggestions for this problem are welcome!

  Please help us

  Dies

  The devil has certainly been involved here:

  Apparently, tray 2 was selected instead of tray 1... I have no idea how! I have only 1 paper tray!

  Well thank you for your support and have a great day! In Amsterdam, the sun comes through, maybe it's a sign.

  Dies

• BB10 customer cannot get BES10 boost

  My client of waterfalls must push BES10 (single company).

  It creates PushService with "205" as applicationId, but cannot create channel.

  m_pushService = new PushService (providerApplicationId, INVOKE_TARGET_KEY_PUSH, this);

  providerApplicationId = "205".

  targetKey = "com.example.pushCollector.invoke.MYpush."

  ....

  m_pushService-> createChannel (QString("")) Gets the 10102 error, which indicates:

  'PpgUrlMissing 10102 = ".

  Indicates that a PPG URL has not been specified as he tried to perform an operation of creating channel.

  This result code can occur for any of the following the PushService: createChannel().

  Recommended action: This usually means a programming error in the application. To ensure that a URL of PPG is specified in a Create Channel operation".

  However, https://developer.blackberry.com/html5/apis/blackberry.push.pushservice.html#.create said: "If you write a business application, no ppgUrl value must be specified."

  Please help with the correct initialization of PushService for BES10 push using the old method of the 'port '.

  Thanks in advance

  Peter,

  I used the same code to push that we used on BES5:

  http://bes10one:9080/push?DESTINATION=12345678&PORT=205&REQUESTURI=/
  

  BES 10.1 it's also works against 10.0 BES

  Demand goes like a POLE, with the payload within the post data, as usual.

  I have not tested again using a Pap-push my main concern was to get out the growth of our App Server existing who has been pushed to BES5 and BB Java OS devices using the format of RIM-push.

  Kind regards

  Geof

• Printing envelopes 6525

  How to print envelopes on a 6525?   Help

  Hello

  The #14 manual page:

  Load the envelopes
  Remove the main tray.
  ❑ If the photo tray is open, press again.
  ❑ In the main tray, slide guide of width of the paper to the outside.
  ❑ Remove all previously loaded media.
  b. load envelopes.
  ❑ Insert one or more envelopes in the center of the main tray. The side to be printed on should face downwards. The flap must be on the left side and upwards.
  ❑ slide the stack of envelopes until it stops.
  ❑ Slide the width guide to the paper inward against the stack of envelopes up to the stop.
  c. push back in the main tray and then open the paper tray Extender.

  Kind regards.

• C6180 printer tray repair

  Hello

  A heavy book fell off my shelf on the tray of the printer. Plastic cling this part broke. (See the image)

  

  Because the bit that broke was a strain on it, glue did not last very long. Insulation tape has worked but caused the printer to jam more like paper sometimes rubbed against it. I use screws to hold it in place, but it is not the best solution. Is it possible to get and install a new tray to print for relatively not expensive?

  Well, I managed to fix it myself, made a better impression in fact platter.

  

  I have used 2 of these (http://www.amazon.co.uk/Business-Metal-Paper-Binder-Fasteners/dp/B0051SMA54)

  

  I also used 2 of these (http://www.amazon.co.uk/Black-Slide-Spine-Binders-Binding/dp/B0034TNPAQ/ref=pd_cp_office_3)

  

  with the broken part and bluetack deleted. A link bar is placed at the edge of the bed. (The part of the binder where you normally put at the end of the tray of the printer paper, pushed along until the tray of the printer is more or less central). Then, high-speed steel (lower part) is folded to one side on the other pushed in each side of the connecting bar. The other side is so expanded, outwards. This part is now folded and pushed near the outer edge of the first tie bar. The second link bar (the part that you normally bind the paper with) is praced on the top exposed fasteners, which is binding on the other ends of the clips. The second link bar is located at 90 ° to the first tie bar and whole corrects the tray of the printer. It works much better than the original.

• HP Deskjet all-in - One 1051 registers as an all-in-one Deskjet 1050

  Recently bought a HP all-in-one Deskjet 1051.  After you have installed on the computer, he enrolled as a series of J410 Deskjet 1050 all-in-One.  I was wondering why.

  The numeric designation may vary according to the regional location or the retailer where the product was purchased. It can also link in how the product as the default value of different media formats, for example in North America with paper letter against Europe with A4 size. What it boils down to is that your printer is a Deskjet 1050 printer specific specialized series for a retailer or the country.

• DeskJet 6988: prints without custom border deskjet 6988

  I want to make a card (5 x 7) which means I have to print 10 x 7. I tried to do a custom size by clicking on "without borders"but I still have the white border.» The option without borders works with no custom sizes?

  Hi @mhm45,

  Can I have found some information about you on your Deskjet 6988 borderless printing options.

  Please NOTE: With all models, print custom page sizes are n ot guaranteed from Windows, it usually ends up being a limitation of the operating system presets. All these settings are error.

  I think you're right, it should use an option without border defined by the operating system - but you can review the information provided in the user guide for printing without margins to see if you missed something. PG 59-61.

  This information has been in the User Guide for the Deskjet 6988;

   

  Print borderless photos

  Use printing without margins to print to the edges of some types of paper and printing on a variety of paper-paper photo sizes 3 x 5 inches to a custom photo size 210 x 594 mm (8.5 "x 23.4").

  Guidelines

  ● For high quality results, use a print cartridge photo in combination with the print cartridge three colors.

  ● do not print photos without a border in ink-backup mode. Always have two ink cartridges installed in the printer.

  ● Open the file in a program such as Adobe Photoshop or HP Photosmart software and affect the size of the photo. Make sure that the size matches that of the paper on which you want to print the photo.

  ● If you have installed the HP Photosmart software, you can use it to assemble panoramic digital photos before printing.

  ● For maximum strength, use HP Premium Photo paper.

  ● Check that the photo paper you are using is flat. For more information about the prevention of photo paper to curl, see photo paper storage instructions.

  ● Do not exceed the capacity of the tray in: 25 sheets of photo paper.

  Prepare to print

  To print a single small photo, use the photo/envelope feeder.

  To print several photos or more, follow these steps:

  1. check that the printer is turned on.

  2. for small photos, remove the output tray. For large photos, lift the sliding top. Remove all paper from the tray in. 3. drag the width of the paper all the way to the left guide and then pull out the paper length guide.

  4. check that the photo paper is flat.

  5. place the photo paper in the tray, with the side to be printed on the bottom. If you use paper photo with a detachable tab, check that the tab is so opposite of the printer.

  6. slide the paper guides against the paper.

  Note: Some formats of panoramic paper may extend beyond the edge of the In tray.

  7. for small photos, replace the output tray. For large photos, lower the output tray.

  Print

  Note: If the software includes a photo printing feature, follow the instructions that are provided with the software. Otherwise, follow these instructions.

  1. open the photo in an application that allows you to edit, such as the HP Photosmart or Adobe Photoshop software.

  2. open the printer properties dialog box.

  3. click on the shortcuts tab print Chapter 5 60 HP Deskjet 6980 series

  4. in what you want to do? drop-down list, click borderless Photo printing, and then select the following options:-print quality: normal or best. Note for maximum dpi quality, go to the paper/quality tab and then click Maximum dpi in the drop-down list print quality. -Paper Type: A picture appropriate paper type - size of paper: a paper size appropriate photo without margin - Orientation: Portrait or landscape

  5. set the HP Real Life technologies.

  6. click OK to print the photo. If you have printed on paper with a detachable tab, remove the tab to make the document completely without borders.

  Please let me know if any of these steps has resolved your problem, or if there is anything else I can do to help.

  I look forward to hear from you!

  Thank you

• HP envy 4500: color photo printable

  I am trying to print a picture on paper glossy 4 x 6. I get a message that the minimum margins are not fulfilled and it will not print my picture. I searched HP for more information but can't find anything on this problem. Can anyone help?

  Rhody81

  Hi @rhody81,

  Welcome to the Forums of HP Support!

  I see that you are unable to print photos of 4 x 6 with your HP ENVY 4500 e-all-in-one printer. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution" if I helped successfully will solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand that you get an error message. The error message indicates that the image is trying to print within the margins of the printer preset.

  Please, try the steps in these guides:

  • Print Photos stored on your computer (Windows)
  •  Change the print settings (Windows)

  Load photo paper

  1. make sure that the paper tray is open.

  2. slide the width guides to the paper to all open.

  3. remove all paper from the tray to paper and then load the photo paper with the side to be printed on the bottom.

  4. press the photo paper in the printer until they stop.

  5. slide the width guides to the paper firmly against the edge of the photo paper.

  To print a photo on photo paper

  1. on the file menu in your software, click on print.

  2. make sure that your printer is selected.

  3. click on the button that opens the Properties dialog box. Depending on your software application, this button can be called properties, Options, configure the printer, printer, printer, or preferences.

  4. Select the appropriate options.

  ● On the Layout tab, select the orientation to Portrait or landscape.

  ● on the paper/quality tab, select the paper type appropriate media drop-down list in the area of selection of the status bar and select the print quality in the quality settings area.

  ● Click Advanced to select the appropriate paper size from the paper size drop-down list.

  NOTE: For maximum dpi resolution, go to the paper/quality tab, select Photo paper in the media drop-down list, and then select Best quality settings area. Then, click on the Advanced button and select Yes in the print in the drop-down list DPI Max. If you want to print the max DPI in grayscale, select high quality grayscale printing in grayscale in the drop-down list.

  5. click on OK to return to the Properties dialog box.

  6. click OK and then click on print or OK in the print dialog box.

  NOTE: When printing over, remove unused paper from the tray paper. Store photo paper so it does not start to curl, which could reduce the quality of your print.

  14 Chapter 3 Print ENW

  Source

  Supported paper formats

  Type of paper

• The photos are not yet (printer Photosmart 7510)

  1 HP Photosmart 7510

  2. Windows 7 64 bit

  3. There are no errors.

  4. I don't have any changes.

  Hello, HP Support.

  I just bought a new HP printer to replace my old HP C4280 printer. Although fine print pages of the letter, I'm struggling to print 4 x 6 photos. Printed images don't print not evenly to the edges of the photo paper. I thought that I put in the incorrect photo paper so I took the photo paper and put it again. Unfortunately, the photos are always printed evenly to the edges.

  Here is an image showing the problem:

  

  I also fought with the same problem and noticed that there are not any helpful solution. After an hour of fiddling and realize that many other people have the same problem because of the design of the printer and the inability of technicians to understand the problem, so I decided to share my solution:

  1. first remove the photo tray and paper in the main tray.

  2. now, look at how work the main input tray sliders... To adjust the front and back after installation of the paper to ensure that it feeds correctly. If this is not the case, the document will at an angle and therefore the white frames uneven or break printing. You can see that the paper comes to tilt slightly and with lines

  3. make sure that put you the paper in the main tray outright and that the two blades are aligned with the paper squarely against the back of the tray.

  4. now make the printer alignment. If you have inserted the paper correctly, you will see that patterns of alignment are also directly and have some space before you start, not not against the side of the paper...

  5. now print a photo in the main paper tray A4/letter... If the document has been inserted correctly in the main tray and you have deselected the option border to print full coverage of Letter/A4 plain paper.

  6. once it works, you can introduce the photo tray again and starts the photo printing. They should also print correctly now.

  Hope that this help that I was about to box this printer and ship back to HP until I thought the paper was poorly supplied due to a bad main tray hugging design which weighed the alignment of the printer, this stuffing your photo printing as well...

  Good impression

• synchronization of photoshop with my macbook screen show so it's 100% / size of the document. tried a few things, but bad!

  I tried this... Get glimpses of more specific in Photoshop print size

  I have an a4 document set to 300 dpi for example... any document size really...

  so I tried what is in this article and its does not work...

  I worked on my macbook pro 15.4 inch (no retina) a 93.5 ppi

  so I place 93.5 in the section unit and rules of prefference, just as she shows in this article... I did so that the graphics processor status is issued

  so, I make the changes and still no effect...

  and see by reducing the dpi document as it gets close to the actual size, but I should change the document dpi size of course. more will happen if I don't want to use 300 dpi... I don't know if its clear, but I know what is happening there, I think there must be something else that I need to adjust...

  If anyone can please help me! I use illustrator as well. Apparently, with which I have for example put an A4 paper sheet against my screen and at the height of the Board a4 graphic on my screen for the piece of paper and note down the zoom level and custom made it... (sounds like something that should be just a few clicks of a button to synchronize my screen with an adobe product... Yet, it is not...)

  If someone could walk me through for both would be great.

  Ooooh I've worked on it.

  the mistake that I did, well I thought that I had to use the "diagnol' cross measurment screen which was 15.4... so 1440 divided by 15.4 who gave me rounding 93.5.

  but in fact, I had to measure horizontally across my screen 13.1 inches and make the sum and it worked!
  then follow this link. but measure horizontally across your screen (don't think he says...)

  http://www.photoshopessentials.com/Essentials/print-size/

• Discover the value of zoom - full size (difference between the Id and AI)

  Hi all

  Something that bothers me in CC, which I do not remember in CS4, is that differences in view zoom factor for a 'real size' perceived between Id and Ai.

  For example: I'm on a PC with a monitor that is running at a resolution of 1920 x 1080 pixels and your screen with a diagonal of 24 ". AI when I hold an A4 paper sheet against the screen and change the view zoom factor, 128% is the zoom level for which a work plan A4 on screen aligns upward with the sample of paper.

  However do the same thing with the Id, the zoom factor seen is 96%! ???

  Anyone has an idea why this is? I use the same format of document 300 DPI on both. Have no UI scaling applied.

  I'm sure that when I was using CS4 this Id was the same 128% like setting.

  Would be nice if they were the same.

  Thank you

  Keith

  However do the same thing with the Id, the zoom factor seen is 96%! ???

  From CS6 100% zoom level is the actual print size, so if you set your rules and inches and the zoom to 100% level a prominent thumb be measured like a thumb. In Photoshop and Illustrator, the 100% zoom level continues to be a 1:1 ratio image pixel screen.

  Re: InDesign CS6 for pixel resolution only documents not the same

  Re: 1:1 view

• I upgraded to 5.0. The image is now my full screen. To see that the tabs I have open, I have to push my cursor up against the top edge of the screen, where it will appear in the display.

  In the improved version, the image of any page Web I'm on fills the entire screen. There is no info either the top of the screen or at the bottom of the screen, just the image of this Web page. If I push the cursor upward against the top of the image, then two nav bars pop open, one with a list of open tabs or windows and the other with a place to type the URL from another site, as well as on the right of the icons for Greasemonkey, etc.. Pushing against the background of the image icon does not produce anything.

  F11 activates / deactivates the full-screen mode - turn off.

• P645-MG how to remove the battery? I push with a paper clip in the hole of the icon on the back, but no reaction

  TravelMate P645-MG how to remove the main battery? Nothing happens when I push with a paper clip in the hole of the battery icon at the back of the computer. A video UTube said that a cover opens, but I can't find where there is a cover of the battery compartment.

  Hello

  Your laptop is equipped with an internal battery. You need to remove some modules and the bottom of the laptop to have access to it. The pinhole is only to reset the battery.

• RIM Push Notifications - connection limit

  Hello

  I send the rim push push through my BES BlackBerry.

  I received notifcation to another server. This server another wait notification.

  It works well, but it stops to work every day.

  The BES stops to send notifications to the other server. (even if the push message has been successfully delivered).

  I think that there is a connection limit or something like that.

  You have an idea?

  Looks like I'm wrong, we do not see a response from the device:

  <2011-01-28 10:35:36.095 CET>:[45819]:::
  

  But logging still does not show an attempt to notify the server and yet some information is missing. Could you please allow both verbose and logging HTTP? Also please let me know:

  -What size of shoot you send

  -The frequency that they are sent

  -Are there many instances of MDS - CS in your environment?

  -Try to push to another user, after that this problem occurs, you receive a response?

  -You send all right pushing every time during this test?