Paper alignment problem 710e HP Officejet 6500 has

Having a problem where the printer is to cut the top 1/8 "out of all the copies and printed pages. Does anyone have a solution for this problem?

You could try to do a print head alignment, but I don't know if that will fix it. You can find it by going to the printer settings. Then, look under Tools, and you should see align the print heads. In case this doesn't work, I'll send you a few steps to try via private message. Let me know what happens.

Tags: HP Printers

Similar Questions

  • Message ' load paper ' wrong on Officejet 6500 has more

    I get a message ' load paper ' on my Officejet 6500 has more.  When I first got the printer and installed with my office, it does the same thing, but he stopped after a download from HP.  Today I installed it on my laptop, and now it gives several times the same message despite that I have loaded and reloaded varying amounts of paper.

    Windows 7 64 bit

    Hello

    This article should cover the problem you are experiencing. Give the steps described a shot and tell us if it helps.

    http://goo.GL/NeUWY

    Good luck!

  • OfficeJet 6500 has more printing problems

    My Officejet 6500 has more (model CN557A) is connected through the USB port.  My operating system is XP.    I can scan my computer, I can copy and print from the printer control panel, but I can't send anything to print from my computer.  This problem just started about 3 days ago.  I tried troubleshooting but I have not received the case.  I did not add new programs, and I have 194 GB free on my hard drive.

    Can anyone help?

    N ° however, I accidentally discovered the problem.  I had a card reader connected to my computer to download pictures.  Apparently it disrupted the cycle of printing for my printer.  I removed the card reader and the printer works fine now.  Thank you for your response.

  • HP Officejet 6500 has stopped printing, paper white just came out.

    My Officejet 6500 has just stopped printing.  I use a USB connection and my operating system is Windows XP Home Edition.  At first, it was just the text that Wouln't print but the colors would come by, even on test prints.  On a print document the little box comes up showing the data transferred to printer, printer starts but doesn't work with a blank page.  I have uninstalled/reinstalled program, has gone through the full program of the HP Solutions guided, checked all connections, installed the new driver, and yet do not print anything.  Have never had any previous problems since I bought.  I have not recently installed new programs.  Would appreciate any other suggestions.

    After everything I lived, I finally solved the problem.  Although the ink levels showed ink cartridges, I put a new black in one and it works!

  • Problem with Officejet 6500 has more wireless on my Mac running Lion

    I just got the Officejet 6500 has more. I was able to make it work with my HP PC Windows XP (would not work with the radio, but it's probably a problem with this computer - connected very well with USB). But I don't see the option to add it on my Mac (main computer) running OS Lion. I'm completely updated on Mac software. I see my other printer as usual (also a HP) on Mac.

    Tried to reboot several times. I looked on the HP site to various articles and it seems that I might need to make an update of the firmware on the printer, but when I downloaded the software (on the PC), my printer is gray and so wouldn't let me - or does not need the upgrade. Then. I can't see the printer on the Mac and don't know what else to do. Ideas? Thank you... Is the printer on my wireless network - I can not see the IP address and others.

    I don't really know exactly what I did - added to the printer with its IP address and manually the software (added name - I also had a HP update tonight for the printer software, but that only did nothing), then printing I tried and it still would not work.  I used the adjusted IP address, which I found on the dashboard of Verizon. And for some reason, once I put that in manually on the printer, it remained there, even when in desperation I tried to put it back the "detect network" setting. Sorry - but this is not quite logical or in the order.

    Also, I restarted the router, then the printer. Somewhere among all the things I tried, to my amazement, it finally worked! At first, I saw the IP address as the name of the printer (which I had entered it), and then he asked to be changed to the actual model. I did it and it now seems to work. Here, I could tell exactly what I did, but perhaps in what I wrote, you will get a glow and know WHY it worked?

    I wanted to thank you again for all the time you spent to try and help me get this working. It is really really REALLY appreciated and I definitely click the congratulations for you! Thank you very much!

  • HP officejet 6500, has no color printing

    I need help. my HP Officejet 6500 has more out of print colors.  I changed the printhead twice ($86,00), with new inks, hp 920, (all colors and black) twice ($120,00) has contacted HP tech support and they told me it's a hardware problem and it is irreparable! Prints fine in black ink only.  copy, scan and fax work well. The test to align the printhead fails.  I am running windows XP, sp3 with all drivers up to date. HP makes no more of this model, I really like the way he worked.  Nice picture Wi - Fi and print present works well (black ink only).   Would like to keep this printer and not lose my current investment of ink cartridges (HP920). The current model uses different inks (of fat) can someone help me.  Thank you.

    James k. battle sr.

    Hi JKBATT

    There is no other authorized renovated dealers I know.

    Sorry, I should have mentioned that if you call HP technical support, you can inquire about trade and trade program.  You can always get a new printer if you have decided to go this way.

  • HP Officejet 6500 has stopped printing

    For some reason, my HP Officejet 6500 has everything in a printer does not print any more. The document moves through the printer and comes out blank. It does not print anything to a file on the computer, including something as simple as a letter. It won't photocopy. It will only accept faxes. The paper just moves from the status bar if the machine and get out again, blank. When I tell it to do a test print - it will print the boxes and lines and color, but does not print anything else.

    About a week ago I had trouble with my air conditioner, and he got up to 90 degrees F in the House. The printer worked fine before, now it doesn't. The fire to something the printer?

    For some reason, my HP Officejet 6500 has everything in a printer does not print any more. The document moves through the printer and comes out blank. It does not print anything to a file on the computer, including something as simple as a letter. It won't photocopy. It will only accept faxes. The paper just moves from the status bar if the machine and get out again, blank. When I tell it to do a test print - it will print the boxes and lines and color, but does not print anything else.

    About a week ago I had trouble with my air conditioner, and he got up to 90 degrees F in the House. The printer worked fine before, now it doesn't. The fire to something the printer?

    I don't know how all this relates to MS Windows, but maybe you could try HP support regarding problems with your printer, for example.

    http://h30434.www3.HP.com/T5/Web-printing-software/OfficeJet-6500-won-t-print-black/TD-p/462153 the heat in the House can have dried ink cartridges.

    http://h30434.www3.HP.com/T5/printer-networking-and-wireless/printer-HP-OfficeJet-6500-E709n-series-doesn-t-print/TD-p/1897459

  • OfficeJet 6500 has more I printed some photos and now won't print regular documents.

    Software problem with paper size selection.

    I've used the Officejet 6500 has more several years with no problems. Recently, I have printed photos and changed the size of the paper, it printed fine. Now it will not print any document or e-mail message said selected paper size is incorrect. I looked for different paper formats and changed the letter. Same problem will not print documednts. It will correctly display the photos. I have deleated and reloaded all HP software already.

    Is it now a Windows 8 malfunction?

    Help.

    Thanks for the offer. I continued to work on the set-up and you have the printer to work.

    Thank you.

  • Impossible Telec... OfficeJet 6500 has

    I have problems with the passage of my printer fax. I have a HP Officejet 6500 has everything in Copier, scan, fax and printer. I created everything correctly according to the instructions. I ran a test 'fax', and he said that my phone line was not active. I use as my ISP Comcast. I called them to test my phone line, in fact, they said that everything is working properly and that the line is active. I use the telephone cord two wires supplied with the printer. Called HP support, no help. They said that the phone cord is defective and I have to buy a new one. Well, I've been all over creation trying to find one and nobody does not sell, only the four sons. Now, I'm really frustrated! I would like to start using my Fax. Help, please!

    Hi @kimberfo ,

    Thank you for using the HP Forum. If your problem has been resolved, please select the button accept the solution.

    Kind regards
    George

  • How to print from my ipad to the officejet 6500 has more?

    I read that there may be something else than necessary. I want to print directly to the Officejet 6500 has more. Apple said ths is an Air Print printer able to do this. I don't take this monster out of the box until I know he will do what I want without a lot of trouble. Thank you.

    OK, so you were talking about requiring the update.  It is difficult to say that all depends on if it came with the new firmware or not.  It is not really relevant, however, because it will be updated as soon as Web Services.  This process takes a few minutes.  There is no computer necessary for the update of the firmware as long as the printer has internet access (which is directly connected to a router via ethernet or wireless).  Yes, a connection ad hoc, you will be able to print from the iPad, but you can use its 3 G connection instead of through your router.  It can only support a single WiFi also.  Go ahead and set up the printer and keep me posted on what happens.

    BTW - what is the problem with your PC that it cannot access the internet?

  • HP officejet 6500 has more poster "original jam". There are no jams, how do I clear the message?

    HP Officejet 6500 has more poster "original jam.  Clear the jam, and then press 'OK' to continue. "There is no paper jam and the printer will print as long you don't try to use the automatic charger.  However, the error message continues interfering with scanning and other print jobs.  Any ideas on how to clear the error message?  I tried to reset, nothing helps.

    Thank you.

    Hello HPAllinOneSande,

    Perhaps there is a jam that is located somewhere on the printer. See if you can follow these steps to clean the error and the jam.

    ' Original jam: clear jam and press OK "Message displays on the all-in-one

  • HP Officejet 6500 has more by using a different IP address than before

    I have a HP Officejet 6500 has more. Until yesterday, the printer worked wirelessly with my Mac OS 10.6.8 using the same IP address in IPv4 as the computer. I ran the HP Network Config page and it shows an IP address different today that it did. Is the message that I get when I send a document to print wireless: network host 192.168.1.101 is busy try again in 10 seconds.

    I checked the IP address of the printer and it is 192.168.1.100 (not 101). Therefore, they do not speak with each other. I treated all the solutions that I can find on the HP network to see if I can get the two survey periods to match and nothing seems to work. I turned off, turn off router, off modem, printer is off, turned off computer and lit them all back. No help.

    Any suggestions? Can I print using USB, but it's embarrassing.

    Something doesn't look good - maybe that I misunderstood... You say above, your computer and your printer had the same IPaddress and, when this is the case, you were able to print. Now, the printer and the computer have different IP addresses and now, you are not able to print. If this summary is correct, that then it seems to me that it should be exactly the reverse.

    If the IP addresses were the same, there is a conflict between devices, a bit like a mailman trying to deliver mail to two different locations which have the same addresses... What place receives the mail? It is normal for all network devices have their own unique IP address - how each device gets its own mail... or data packets.

    From the sounds of things, your printer is 100 but the MAC OS think its 101. Therefore, the print job is sent to 101 and never happens at the printer. You have two options... tell the OS that the printer is located at 192.168.1.100 or that, to avoid this problem in the future, on the IP address of the printer a static address, just guessing anything below 100, as 192.168.1.50 and then specify the operating system that the printer is located to 192.168.1.50.

    To make the choice of the latter, you must use your internet browser (Safari) and navigate to the 192.168.1.100 address. There is a web interface for your printer. Look for the network settings, then you can change the way that the IP address is obtained from dynamic (DHCP) static. And, after that, you need to find the IP of 192.168.1.50. It is also important to complete the subnet mask that will be 255.255.255.0. Finally, if your printer includes "web applications", you should also check the DNS addresses. You can use: 8.8.8.8 and 8.8.4.4 (Google's DNS servers) or 208.67.222.222 and 208.67.220.220 (OpenDNS servers)

    Note that when you save / apply the changes, you will lose your connection to the webinterface of the printer as the printer will have a new address. To return to the printer web interface, access the new static IP address.

    As far as to say where actually the MAC OS printer, the simplest option, as appropriate, is to use the HP tool to add a network printer or a device. To do this, AFTER you change the IP address. The HP software will scan the network printer and it should give you a result that shows the printer to the new static IP address. Installing and if possible, the name of the printer with a few references of "static HP or the"HPat192.168.1.50"set as default printer and remove the old definition of HP printer.

    The other option to speak the printer MAC must use Add a printer via system preferences > printer/Fax. I'm fairly certain that the MAC tools can analyze the LAN... in any case, it will be a more complicated procedure. Better for a user MAC more warned give assistance if you go this route.

    Hope this helps

  • OfficeJet 6500 has more on windows home premium 7 ad-hoc connection loss

    OS: windows edition Home premium 7

    product: officejet 6500 has more

    We organize a festival and everyone has a mobile phone that needs to print to the printer...

    We don't have a network or a router and try to connect 6 ad-hoc laptop computers to the printer...

    I managed to install the software on three laptop computers and a print ad-hoc wireless, but now he says that he does not find the printer over, even though the wireless network connections that the pc is connected to the network HPE710n.E5E3C5...

    I can't connect to the http://169.254.227.197/ (printer server) of this laptop...

    so he went completely downhill...

    on this laptop, I was able to print a page...

    on three laptop I was also able to print a page...

    but now he also says he «cannot communicate with the printer...» »

    is ad-hoc only for a laptop at the same time?

    What solution do you propose?

    can we do a completely wireless network with utp cable wireless router? and do a homegroup? and connect the printer with utp?

    is the special designed to accept prints six different cell phones at the same time?

    Thanks for any solution! We need it's really bad!

    With ad-hoc connections, it is really intended more for printing in a pinch without going through the hassle of setting it up on a network.  Or, you have two computers and you have connected it via USB to an and a laptop which is wireless, you can print via ad-hoc of the laptop.

    Honestly, I recommend picking up an affordable standalone wireless router (Netgear, Linksys, etc.) and connect the printer (wireless or Ethernet, does not matter).  From there on, connect the computers on this network and you should be able to install and print without any problems.  You can find the router could be useful beyond just this configuration or may be good to have if you plan to do events like this on a regular basis.

    The printer itself is not a router and communicting with multiple devices simultaneously may create congestion in causing connection problems similar to what you experience when you use ad - hoc for as many devices.

  • Win7 x 64 install an Officejet 6500 has MORE. Cannot print

    Win7 x 64 install an Officejet 6500 has MORE. Printer is connected to the wireless very well. Win7 x 64 computer can ping and see the printer on the network.

    Get a message error everytime I try to print saying: "it cannot connect to the printer.

    Same computer can connect to the printer and to view and modify settings wireless very well.

    I guess it's a problem with Win7 x 64. I need to fix this before to decide to take back to Costco and exchange for the Canon I almost branch instead. HP you have always had driver problems, but still? Really!

    Has taken over the crappy HP. Picked up a Canon PIXMA MX882 instead. Impeccable installation, in 10 min I'm printing, scanning, fax wireless with not a single question.

    I am VERY disappointed with HP and its incompatibility with Win7 x 64 drivers. Don't advertise your crap software is compatible, when it is not! I lost hours of my personal time, trying to get HP to work then most of time taking the piece of crap back (I really like the hardware of the printer - software "guys really?"). I will never buy another HP printer. And on the Canon Wireless Setup was easier. A button called easy set up on top of the printer and BAM done. * beep * HP, * beep * indeed.

  • Help! OfficeJet 6500 has only prints in color!

    I have an OfficeJet 6500 has more that suddenly started printing in color only.  Black is so low, it is unreadable.  I put a new cartridge in, but that does not solve the problem.  My printer is out of warranty, so I hope someone can help me please.  Thank you!

    Here a link to a document that takes account the results of poor quality for your printer model. It will give you the steps to follow that will attempt to resolve the issue of the output that you experience with troubleshooting printer. I hope this helps.

Maybe you are looking for

  • Satellite L - how to activate WiFi?

    It is possible to activate wifi without using the FN function because we no longer. Thank you

  • PC problems says the firewall is disabled. Is not responding when I try to turn it on

    I'm not able to use Internet on my laptop HP ENVY 15 15-j031nr, but I can on any other device at home. The question to solve PC says the firewall is off, but it won't let me turn it on. Also, I have Norton Internet Security. Someone help me please to

  • P6-2400el

    I have trouble finding drivers Windows 7 for desktop PC. Can anyone help? Do not work driver like USB, network, PCI of Communication Simple controller gamepad... I tried install the 8 but may not work

  • Trying to opening session c:windows\system32\lfass.exe is corrupt or unreadible error message

    When you try to log on to my DELL Dimension 3100 (Windows XP) I get an error message C:wINDOWS\SYSTEM32\LFASS.exe is corrupt or unreadible. Please run the Chkdsk utility. What I'm doing, some items suggest running the recovery disc but these models d

  • Maximum number of EA4500 of port

    Hi all Background: currently have a WRT320N, think about upgrading to an EA4500, assuming a feature has been improved: Port Forwarding. Script: Currently, I have a router WRT320N, and while he "does everything we need" it presents a restriction that