Paper comes out clean

Similar Questions

• LexmarkX1270 of acts that it was printing but the paper comes out blank.

  Since the installation of a new black cartridge in the printer, it works as it was printing but the paper comes out blank.  I tried to reinstall the drivers of cleaning cartridge.

  Let us know what happens after you try with another cartridge.

• 7200 printer: photo 7200 printer acts like it is printing, but paper comes out without any ink

  I tried to print photos.  The printer pulls the paper of photo through the machine and acts like it is printing, but paper comes out the same as it began.

  I was unable to print a document, machine not to copy, use genuine hp cartridges, some levels many other low, but non-printing ink.  In fact, I disconnected power to the printer and restarted, it.  Subsequently, he printed as it should.  Thanks for your help.

• What to do about white smoke, whispy from slot where paper comes out?

  After a false paper jam message (sticky humidity and only partially left paper tray), the printer prints whispy thin, but thin, white smoke comes out with the printed sheets. I don't know if there is a smell that I have little sense of smell.

  Help!

  Printer is a Laser Jet 1020 purchased in 2004

  It's likely to steam (steam) of wet paper and not a source of concern.  For more information, see the page here .

• D1520 printer: does not print D1520 - paper comes out blank

  I havew a D1520 printer and Windows 7. Printer is plugged in, ink and has always worked. Today I tried to print a letter and it appeared to do so, but the book came out completely empty.

  Hi jonathanmenn,

  I'm sorry to hear that your printer doesn't put ink on paper.

  There are a few things you can try.

  First try printing a diagnostic test.  You can find the steps in this document.

  If absolutely nothing appears on the page, you need to replace the ink cartridges.

  If you can get the page to print, you should be able to see if there are streaks and you will be able to check the status of your ink cartridges.

  Let me know how this turns out, and I'll try to help more.

  Jean

• 5530th envy: printer will work from Mac but will not copy/print by itself. Paper comes out of the Virgin.

  The printer will scan to the Mac and print from the Mac, but there is no copy/print to the printer. It is on a wireless network.

  Good afternoon @MsAllie,.

• OfficePro 8600: Analysis of the letter paper comes out as legal size. How do I change scan format letter HP8600

  I'm trying to scan pages format letter on the flat of my printer using the "Scan to Computer" on the Panel of the printer.  However, my scans letter size appear as legal size.  If my letter is being narrowed down and I have a white strip at the bottom.  How can I change scan settings scan all in letter size?

  Thank you!

  Hi RPcat,

• cartridges won't come out, says paper jam, how to get out of cartridges without killing printer.?

  cartridges aren't coming out,

  says paper jam, no paper in the printer,

  How to get out the cartridges without killing printer.?

  I did the thing video together 3 times and still won't come out? I'll call hp remote and hope they can fix it thank you

• When I want to copy or print from the scanner on my HP4500. It comes out all black.

  See above

  There is no paper on the scanner screen - the message says that it is

  Hi @OKC,

  I see by your post that when scanning, they come out all black. You also receive a message that the paper is on the scanner bed where there is none.  I can help you with this.

  I have provided a document to make a reset of the printer, the scanner, the lid and ADF glass cleaning.

  Reset will most likely solved the problem. Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Vertical stripes, lines or streaks on Copies, faxes or scans.

  Do not take into account the title.

  If the problem persists, please update the firmware of the printer. HP Officejet 4500 All - in - One Printer - drivers G510g.

  Please provide detailed results if you're still having problems.

  Good day!
  Thank you.

• OfficeJet 4500: office jet 4500 pages come out blank

  I have a hp Office Jet 4500.  Lately when I print only blank pages come out.  It is still ink in the black cartridge, so I cleaned it according to the instructions from hp (printer only in manual mode). I still get blank pages.  I guess I have to buy a new ink cartridge, because sometimes they dry out before they are empty, but now I'm not sure that's the problem.

  This may seem a stupid question, (I don't know the correct names for parties), but is the bar with light, supposed to go under the glass when she prints?  I lifted the hood to see what was wrong and I noticed it wasn't moving, even if the light was on.  I never paid attention to the printer while it was working properly.  I would like to know whether to fix it before I have to waste money on an ink cartridge.  I know that the digital display informs you if there is a power outage, but it didn't.  Otherwise, the printer goes through its motions normally.

  Hello @epona1 , welcome to the Forums of HP!

  I read your post on how your Officejet 4500 is print is no longer with the ink to print outs. I want to help you!

  The bar with light I think you describe looks like this mechanism to scan, which does not move when you make prints, so I don't see that the question. The question seems sound, as for me, would be the printhead to the printer. I say this because you have tried to change ink already and the pages are always feel empty, when normally change the cartridge would help and fix this type of problem.

  Having said that, I suggest that try you this guide and try the steps it will list. It may possibly fix the problem of blank page for you. If not and the problem does not go away, call us directly to discuss your printing with HP options.

  The problems of print quality for the HP Officejet 4500 all-in-One Printer Series

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  

• When you print a picture, it comes out darker I want. Is there a way to make the lightest photo?

  I reworked an old photograph, remove cracks in the original. However, when I print a photo on photo paper, the photo comes out darker I want. is it possible that I can do the lighter photo so what impression it improves?

  original title: make the lighter painted image

  Hello
   
  (1) what version of windows are you using?
  (2) lighter photo and print the photo what software do you use?
  (3) have what tool/application you used to remove the cracks?
   
  See the steps mentioned below and check if that helps.
   
  Method 1:
  Adjust the brightness and contrast of an image
  http://Windows.Microsoft.com/en-us/Windows-Vista/adjust-the-brightness-and-contrast-in-a-picture
  Note: The above link applies to Windows Vista.
   
  Method 2:
  How to edit pictures?
  http://Windows.Microsoft.com/en-us/Windows-Live/Photo-Gallery-edit-photos-FAQ
   
  Method 3:
  Windows Live Essentials: Photo Gallery
  http://Windows.Microsoft.com/en-us/Windows-Live/Photo-Gallery-get-started
  Hope this information helps

• When I print, the printer sounds like its printing but nothing comes out on the page. What should do?

  I just installed an hp F4480 printer, my roommate gave me.  My OS is Windows XP.  When I try and print or copy something the printer looks like it's printing and the paper passes by like it is printing but nothing comes out on the page.  Perhaps is out of ink, I guess, but I don't know how to say and I don't want to spend $50 to get a new non-refundable ink cartridge to see.  I did a print test page and the only thing that came out was a light that said the Page of Test printer Windows XP Blue cap but nothing else was on the page.

  It's really a problem of HP, not a Windows problem, and you should look for the HP Support help site.

  However...

  One of the lights on the printer are flashing?  There are 2 'estimated ink level lights' on the front panel.  See http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01673672&tmp_track_link=ot_faqs/top_issues/en_us/c01673672/loc:3 & cc = us & dlc = en & lang = en & lc = en & product = 3742086

  Genuine HP ink cartridges are installed?  The cartridges have been completed?  How long did it that the printer is correctly printed?

  When you installed the printer, you have installed the "HP Toolbox" application (or you simply download and install the basic printer driver)?  See http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01892627&tmp_task=solveCategory&cc=us&dlc=en&lang=en&lc=en&product=3742086#N44

• M1212nf Scans come out huge when issued

  Hi all

  I read some posts here regarding the scans coming out in great, but none applies to the m1212nf that seems. The only option for scanning you get is "Scan." I went through all the settings, including the definition of the DPI, color mode, and the scan size. No matter what I change, when the PDF file is emitted, it comes out to about 34.44 x 45,10 inches when scanning a normal letter size paper. No matter if it's the scan to email or scan to file, this is the same result. Even using the preview TWAIN dialog box, it shows that it scans the right size ~ 8.5 x 11, but when issued in PDF format, shows like 34.44 x 45,10. I have two of them in our office, a network and a local USB. It happens on both of them on different computers, so it is not an isolated incident. If someone can you please give me any indication on how to fix this it would be appreciated.

  I had the same problem of pdf page size. They seem to have finally fixed in the new software download.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=IM-80811-4&cc=us&DLC=en&LC=en&OS=4063&product=3965849&sw_lang=

  It took more than 6 hours of time on the cat and the time on the phone with a case Manager who says that the software on the CD is the same as on the website.

  Article in THE Times today asks "Whitman can find a way to restart HP?  Well, I'd say that Meg would have just read a few forum posts and ask why they are not documented and resolved timely and why waste us time barely known issues.

• oficejet 6700 premium: HP Officejet 6700 Premium WIN 7 - double-sided print - back comes out backwards

  HP Officejet 6700 Premium - os Win 7 - double sided printing - back comes out backwards. I TRIED TO DOUBLE-SIDE PRINTING, BOOKLET PRINTING, AND PRINTING GREETING CARDS. ALL OUT UPSIDE DOWN AND ALSO very small PRINT ON ONE SIDE OF THE PAPER HALF. HOW TO SET THE PRINTER SETTINGS BY DEFAULT OR CHANGE WHAT IS PAST?   Oh it then, I'm not yelling, just noticed the hats were on.

  Jay B.

  Hi @Jayburn,

  Welcome to the HP Forums!

  I noticed that the back comes out on top down, when duplex printing with your HP Officejet 6700 Premium, Windows 7. I am pleased to see that for you!

  Please, take a look through this guide, print on both sides of the paper (duplex printing) for HP Officejet Premium 6700 e-all-in-one printer (H711). Follow the instructions for Windows.

  Guidelines General double-sided printing

  Do not print on both sides of the following types of paper, or paper jams may occur:

  • Transparencies
  • Envelopes
  • Photo paper
  • Glossy paper
  • Paper lighter than 60 g/m2 (16 lb).
  • Heavier than 105 g/m2 (28 lb) paper.

  Several kinds of paper require a specific orientation when you print on both sides of a sheet. It's letterhead, preprinted paper and paper with watermarks and pre-perfores holes. The printer will print the first side of the first book. Load the paper with the top edge first and the side to be printed facing downwards.

  I hope this helps!

  "Please click the Thumbs up icon below to thank me for having responded."

• If I try to print pictures from the picture library, they all come out in grayscale.

  HP PSC2355 All In One

  This printer has recently been attached to my new computer, HP 2MD2190CLF.

  Running Windows 7, 64-bit

  Settings are the same on the printer, as they were for old PC (XP) and laptop (Vista), that he was hooked up to.

  I am trying to print photos from the library of images and they come out in grayscale. I print documents and that they

  out in color, photos printed color print of the webcam webcams. Put the webcam image in the picture library

  and try to print grayscale. Can someone tell me what I am doing wrong?

  The application that prints photos in the photo library maintains its own set of settings of the printer, separate from what can be defined elsewhere.  Select a photo, click on print and then click on 'options' in the bottom right.  From there you should be able to select the appropriate paper type and color printing.