Paper feeds

Hello - I have a Photosmart C3180 and every time a click to print, the paper feeds through the rear slot of the printer.  Anyone know why, and if so, is there a way to fix this?

Thank you!

The book comes out of the back of the printer?   If so, looks like missing his back door!

Tags: HP Printers

Similar Questions

  • I can't print from firefox. The paper feeds through the printer but does not print. The same web pages appear when I use internet explore. And the printer works fine with word, Excel etc, but not with firefox.

    Whenever I try to print a page open in firefox it will not print. The paper feeds through the computer, but don't not pring.

    See this:

    http://KB.mozillazine.org/Problems_printing_web_pages

  • Photosmart D7560: The Photosmart D7560 no paper feed

    I bought my printer a few years ago and I have not much used.  I tried to use it today and the paper will not feed.  I tried to adjust parameters, thinking that it would work and still no results.  I even tried the cleaning mechanism cartridge and he gave me the same answer, ' load paper '.  I don't know what is happening.  Help, please.

    Welcome to the HP community @TWhite1980 !

    I saw your post on the 'paper feed problem' you meet with your Photosmart D7560 printer, and I want to help! I would like to start working on this problem of cleaning of the rollers in the printer, as over time, dust and paper debris can build up on the rollers and create this exact problem, you have a.

    To see the proper instructions on how to clean the rollers, click on this link and scroll to the bottom for "third step: clean the rollers ' and follow the steps. You can also try to reset the printer and control of any document that you will see in this guide. (Also use standard simple letter to test print paper size or the copy after you are done troubleshooting).

    A Message appears 'jam or jam' for printer HP Photosmart D7560 h

    Please write me back and let me know the result!

  • Paper feed

    I have a Deskjet 2050 printer.  Unfortunately, the paper feeds through. I tried the suggestions offered by HP.  Any ideas?

    Normally this is caused by rolls Sales, but it could be something more serious. All what you can do to correct the problem should be defined in the document below. If this does not work, you may need to replace the printer.

    http://goo.GL/hVD48

  • HP psc 1200: psc1200 paper feeding problem

    will not load paper, rolls move but don't feed

    Hello @Apache655,

    Welcome to the HP support forums.

    I understand that your PSC 1200 does not feed paper.

    I would like to help.

    Paper can leave a very fine dust on the reels. This can prevent the rolls 'capture' the paper.

    I recommend that you clean the rollers.

    Dust, fiber, paper and other debris may accumulate on the pick rollers and cause paper feeding problems. To avoid paper feed issues, clean the rollers inside the printer and in the duplexer (if equipped).
  • My automatic document feeder of MFP HP Laserjet1536dnf has stopped working! No paper feed you in!

    Hello

    My automatic document feeder of MFP HP Laserjet1536dnf has stopped working! No paper feed you in!
    Anyone know any quick fix I can try?

    Thank you

    Robert

    Here is a link that can help you with the 'No' pick in the ADF.
    http://goo.GL/Uu4By

  • HP LaserJet P1606dn: Paper feed 1/3 and printer jams

    I got the impression for about 2 years.  Jams printer after paper feeds about 1/3 of rolls.  I inspected all areas of paper jam.  I think that there are papers torn or other debris in.  I cleaned the rollers with compressed gas area.  Attention no longer flashes when I remove the paper stuck, remove the cartridge and reinsert.  Jam if I feed tray or manual tray background.

    Mystery solved.  I was using an "accountant" Linkyo cartridge.  Just for the hell of it, I replaced it with a cartridge Linkyo and the document without problem.    Lesson learned.

  • HELP NEEDED PLS EMERGENCY! -All new V313w printer paper feed - and apparently out of warranty already? If no support online?

    I bought a new laptop and printer V313w all-in-one a month ago. and I only turned on the printer for the first time today because of a need to send invitations to an upcoming event.

    I used the printer to print envelopes and about 15 sheets of specialty paper. Until all of a sudden it starts to chew the paper and do not supply through everything in print.

    I check online for drivers and updates and download all the relevant files. Try again and still has the same problem, whenever I have print now it chews paper. in fact, it looks like the print head is ripping through the paper.

    I try to find online for assistance too find that apparently it is already out of warranty?

    Everyone here has similar problems with the V313w? Is really starting to get frustrated, because I can't even contact Dell for assistance as I apparently no guarantee?

    Any help from people out there would be appreciated. I really need to try to get the last few invitations printed. (and I'm not buying a printer in order to 15 pieces of paper! only to have to throw it out and by another brand)

    Thank you in advance.

    Thanks for your reply.

    After about 3 hours of trial and error. (and a lot of paper wasted and torn). I found the problem.

    V313w paper feeding, there are several small curlers who seem to be held in place using small springs. they are really hard to do because there is only one opening to remove the jammed paper. in my case, two of these rolls were lower than the rest. This has created in turn issues when printing because it would interrupt the queue through paper.

    After many difficulties, I finished with a set of pliers tweezers for these rolls in line with the rest of the rolls.

    Because now the printer seems to work, so I just assume that these rollers must have been shaken loose / out of position during childbirth.

    So for anyone having problems similar to the printer not feed paper and ripping upward, then check out these small rollers to ensure that it does not obstruct the paper to move through as expected.

  • Mechanism on the paper feed rollers came out HP Officejet Pro 8500

    I tried to fix my printer and accidentally jumped the paper feeder mechanism:

    Now, I can't do it. Anyone know where I can find a manual or video showing how to install it?

    Hi lpage1975,

    It would be too complicated that I suggested you take the printer to nearest service HP close to home center?

    I mean because parts of the roll may be damaged and the best way to who should have the engineer

    Test it as it puts the rear roll in and make sure that it is in full the terms of use before bring you it home.

    In this case things could go wrong. Please use our HP call center to locate the center of service close to home.

    http://WWW8.HP.com/us/en/contact-HP/phone-assist.html#section1

    Sorry I couldn't give you a more simple solution. Hope you'll get fixed soon!

  • 8500 has not not paper feed.

    Printed sheet then printer stopped feeding. Changed paper... clean the rollers. Still not power.

    Used 8 months without problems so far.

    8500 worked for 9 months with no problems.

    While impossible to print the Word Document. Get messages ON PAPER.

    Do not feed paper

    Cleaning the feeder, own duplexer, zero paper, check for jams.

    Always out of paper message.

    Restarted the printer.  Still problem.

    On the HP Support Site... New firmware downloaded. Then restarted printer.

    Could feeding paper and printing TEST page, but not able to print Word Doc. (??)

    "the message of paper"... would not paper feed.

    Re start printer and the computer. Now print all formats.

  • The Officejet Pro8500 paper feed problem

    The paper feeder does not book directly by moving into the printer.  He also sometimes chew the edges of the paper which it passes.  I followed the advice provided in the manual about to clean the rollers and pad and reset the printer.  I have also assured the paper is correctly aligned in the status bar.  Does anyone have advice?   Thank you.

    Remove the rear door and look at her with a flashlight.

  • HP Deskjet 5850: The HP Deskjet 5850 unreliable paper feeding

    Hello - my printer (which although old has had a relatively easy life) always moves the paper slightly squint (I can live with that) and often needs help to pick up at all (I just can't live with it). The current document is paper HP Everyday. Is there a way to rejuvenate the pinch wheel?

    There are a few possibilities.  I would start by cleaning the rollers with a damp Q-Tip foam.  Reach in front, also remove the Panel or the rear of the duplexer and clean the rolls here.

    If this don't resulve not the problem, you can try the following: get a liquid silicone-free.  Use a foam Q-Tip to apply this to the rolls and let stand overnight.  The next morning use a dry cloth to remove any excess liquid, then run a few papers through the feeder.

  • PSC 1315, not paper feeding

    recently reinstalled my psc 1315 and installed new ink cartridges.  It is "sounds of printing", but the paper does not feed.

    Hello

    This article covers book food issues and should solve your problem. Give the steps described a shot and tell us if it helps.

    Good luck!

  • Office Jet 6500 has: no paper feed

    Bought 2/23/12-paper printer stopped feed went through all instructions medical Scan (twice).  Question: Is this printer have repaired or do I have to buy a new one?

    When I work on printers you pay $95 an hour and the parties in order to compare this search at least an hour, some places would be deducted at two for the price of a replacement machine.

    If my post is solved your problem and click the accepted as button solution under him. In order to thank a technician for a post click the thumbs up button under the post. You can even click on the two buttons.

  • HP Scanjet N8420 - paper feed stopped working

    Just out of the blue one day, that my HP Scanjet N8420 has ceased to recognize the document feeder.  I put documents to be analyzed and it is as if she does not yet recognize in there, there is paper.  I push the right buttons to the tray extra paper.  It's just the noise as it does when you use the flat bed scanner and then does nothing.  I've uninstalled and reinstalled the drivers, and that did nothing.  My one year warranty is in place and the online HP chat people do help me no more.  Can you help me?

    adminkim01,

    Here is some information on the manual which can be useful.

    The ADF cover cannot be locked. Open the ADF cover and then close it by pressing firmly.

    A problem with the hardware ADF may exist. Use the following procedures to test the ADF:

    • Unplug the USB cable and the power cable from the scanner. Check that the power cable is still connected to the power source.
    • Make sure that the cable is connected to the accessory port scan and that the ADF has at least two pieces of paper in the input tray.
    • Reconnect the power cable to the scanner and then turn on the scanner.
    • Try to scan another page through the ADF.
    • If the ADF doesn't feed paper, contact HP customer care.

Maybe you are looking for

  • Message 'disk almost full '.

    iMac - end 2012 macOS Sierra I get a message "your disk is almost full" after the upgrade.  Ever before, and there are more than 600 GB free on my 1 TB drive.  Is there any solution for this?

  • proplem with account synchronization

    I tried to synchronize my account but when I did he told me that I must be over 13 years. And I'm 13.Tried to fill out new, but could not. Thanks for supporting.

  • TouchSmart 520-1050

    I have a 520-1050 touchsmart. Is this compatible with an i7 - 2600 k processor?

  • Podcasts of Xperia Z2

    Hi, did anyone know how to set the Z2 until downloading podcasts on the SD card instead of the phone's memory? My default phone is to download them to the phone that I don't really want. Thank you

  • I accidentally deleted desktop.ini? How can I regenerate again?

    What is a desktop.ini? When I have deleted some files for example bin $recycle, information value system can be seen in all readers? What should do to regenerate?