Paralelismo between gerador rede e

Similar Questions

• REDES Separando

  Good afternoon colegas,

  Tenho um Servidor ESXI com duas redes entraba por duas while of rede.

  O esta ocorrendo e as some management IIS ficam extremamente lenta quando as duas rede ativas are while.

  Awesoe ocorrendo if application is between as redes.

  Are any practices para boas norma this type of situation?

  Imagem do Networking segue da minha rede configurada. A principio as redes eram pra estar totally isoladas product?

  Desde ja Agradea§o a bonitos,.

  Existem pontos 2.

  UMA as ja faith levantada e has Supreme self estarem ligadas ao mesmo switch core com dati different can cause problems, nesse chaibi, voce would um looping rede na, e o seu switch comecaria a dropar some pacotes OU ficar meio perdido.

  You svetila a fazer um nic team (juntar as duas while of rede) from which both trabalhem com mesma speed.

• Satellite L755 - 1HW screen covered bulk green / missing graphics card

  Satellite L755 - 1HW
  Part number: PSK1WE 0U0009EN

  I recently bought a Satellite L755 with integrated nVidia graphics card. The screen had recently pink/green tint everything except a cm Strip flooring upstairs.

  This makes it impossible to tell the difference between the red and the black. It also has an effect of streaks on darker or lighter blocks, going up and down the screen.

  For some reason, it can detect is more the graphics card and I can't download the new drivers as long as it does not detect the card. I tried the system restore and the first time I did the color returned to normal for a short period. Since then, the question remained regardless of what efforts, I undertook to solve the problem.

  Unfortunately, after I lost the receipt, I can not simply return it. It is only around the age of 3 months and therefore should not be seen this kind of problems. Any ideas?

  Hello

  I'm not very well if it is a driver problem m more like GPU problem or display
  You can see the same symptoms on the external monitor attached to laptop?
  If Yes, then I would say that its number of graphics chip

  Even if you have lost the receipt, you should visit the dealer may be the dealer could help you in this case

• Acer V7 ZQY: battery (AP13B8K) suddenly dead

  Hello

  This laptop is a little more than a year.

  The accumulator has been in charge of 30% to something like 70% when I realized that the percentage has not increased more.

  I have read the information of the battery (charge status, tension etc.) but it did not and during the withdrawal of feeding, the laptop turns off immediately.

  This happened a few months ago. I found a few discussions, saying it might be a bios problem, but the upgrade software does not run: he says that I have to have more than 30% battery left, and now the battery is below this level.

  I removed the battery from the laptop and tried to activate it by putting a 100 Ohm resistor between the mass and the Green wire next to the red one (the battery sends a short pulse here every second). The tension on the thread is always zero. Then, either is not the correct activation method or the switch to solid state in the battery is dead.

  When the battery is in the laptop, the voltage between the red and black wires is 0.8V...

  So dead battery? BIOS problem (if so how can I put it?)? Failure of the motherboard?

  Thanks in advance if you have any clues or tips...

  Benoit

  Hi Laurent,.

  Thank you very much for your help!

  I just got one installed a new battery I ordered on a Chinese online store (whose name contains battery shop and portable...). The battery has exactly the same reference (AP13B8K (4ICP6/60/80)). It has the same wiring, even sticker on the left (the mark of Acer wiith sticker is missing however).

  It works: the laptop runs without power and electricity network it says that the battery is charging. I hope that it will last more than the first.

  Problem solved

  Benoit

• The use of the graphics processor

  Hi there, I hope you can help with this problem: during display table for the use of the cpu and the bottom shows it red when he goes on his use of 20%. What it means?

  There is an option to break the graph of CPU usage in two sections; time in kernel and user mode time mode. Many devices drivers and the essential elements of the operating system running in the kernel, so that the user-mode run in user mode. This option can be enabled by selecting the kernel schedules on the view menu. When this option is enabled on the chart to use CPU will show one green and one red zone. The red area is the amount of time spent in kernel mode, and the green area indicates the amount of time spent in user mode.

  Read also:

  Difference between the red and green CPU usage
  http://www.ehow.com/info_8567865_difference-red-green-CPU-usage.html

• power-supply re-use

  Hello

  I'm trying to give a new life to my good old Compaq Presario Windows 95 computer. Is to use the wardrobe and the power (+ 12V, + 5V, both very interesting) for a project which I was buy a power supply anyway.

  So I thought, let's give a new life to this old beast. AF TI less safe environment to another part of e-waste.

  Furthermore, food is a MITAC SPU-75.

  I am aware that the reuse of PC power supplies requires generally a few rules to follow. There should be a charge on the + 5v and of the connecting leads must be grounded to convince food it is supposed to be 'on '.

  That's what I thought until I tried with this little beast. Being an old Compag connectors are not standard, 2 x 6-pin.

  Anyone has any experience in re-using this type of diet?

  Kind regards

  Reinhold

  I thought about it!

  I have connected the white wire to the orange wire and put a lamp halogen 12V 20W load between + 5v (red wire) and GND (black wire). Then - so it's important - turn on the switch on the rear of the unit. Voila, now it works!

  PROBLEM SOLVED!

• 7.1.0 update Bundle O2 1133 failure blackBerry smartphones

  Hello

  I was recently informed of the update above on my phone. I did the update and to the actual update process request to 02:00 in the morning to make sure that the phone was a) on load and b) not likely to receive a call!

  I woke up to a phone alternating between the red LED coming on, a flash of the start-up of the Blackberry logo appearing on the screen.

  Later, I plugged into the PC and tried in various combinations:

  (1) using the DM to load the bundle 7.1 directly

  (2) using the the /nojvm loader.exe (connects, goes through the process of loading but fails to 'connect to the JAVA virtual machine')

  (3) wiping with BBSAK (cannot connect)

  (4) wiping/evaluate with JL_cmder (no actual feedback app - no newspaper)

  I tried different combinations of removing the battery and disconnecting from the PC before the JVM connections and attempts without success.

  I have a full backup, so did reall worried some people lose all the data, but it is VERY frustrating.

  Advice please?

  Martin

  Think I may have a solution for those of you out there with the same problem as me.

  I bought an extended capacity battery and it seems that the new operating system is turned on, the unit no longer sees the largest capacity of the battery.

  Discovered when I inserted the old battery to return the unit for repair, all of a sudden, obtained through a 507 error, but has managed to go through the procedure of /nojvm loader.exe (with the battery removed until initialization), then jumped into the battery and ' hey presto '-she relives!

• Solid color based on gradient fill

  I do a rating system that has a red/yellow/green gradient and I also have a Flash that I form wan't to color in the exact hue that lands of their mark on this scale. So if they get 50% they would get the pure yellow, 25% would be an orange hue between the red and yellow, etc. I know that I can use the eyedropper tool all holding the SHIFT key, but I was wondering if there was a more accurate way to do. Like the ability to type in a location '25% ' and it is moving at 25% the downward slope so that the color orange?

  You can use the object > Expand to penetrate the unique gradient of color fills.

• Best practices Networking ESXi 5

  Good afternoon.

  Hate me help, docks as best practices para uma infraestrutura of rede receber o Vmware (ESXi 5 + vCenter vConverter) autonomous.

  Switch, VLAN, NIC?

  Obrigado

  Olá amigo, good afternoon.

  Leave aqui um trecho do livro "Virtualização - Central Datacenter do Componente" em than comenta, sober os conceitos uma rede virtual cloud:

  An e VMware a Savvis sugerem some measures Segurança interesting than sao Speaker aqui operacionais:

  Lado provedor:

  • Manter as redes for sao to leave da infraestrutura virtualizada isoladas. Insulation pode ser feito com os rocking or utilizando segmentacao through VLAN. Outro Método PODES use uma want Kanada Doi methods e o conceito of virtual switch.
  • Manter as redes of members isoladas. Manter as redes of members e isoladas interfaces controlled devidamente.
  • Manter as redes used para verificaram maquinas e tolls IP isoladas em redes roteaveis nao. Estas redes precisam ser rapidas e ao mesmo tempo sao suscetiveis an attacks.
  • Manter as redes back clients isoladas. Estas redes should ser isoladas das redes e members should divertir firewall between as redes para avoid security problems.
  • Fornecer seguro aos recursos nuvem client access. Client OS usually precisam ter access has recursos dentro da e nuvem para isto e Chipre o provedor disponibilize um Portal com encriptacao para Segurança effect.
  • Backups to maintain E restores seguros e consistent. Provedor deve to maintain this appearance basico realize e recursos back to maintain backup um processo rapido restore.
  • Autenticacao strong mechanisms, auditoria e autorização. OS provedores should please has autenticacao segura, access so aos recursos waiting rooms recursos providenciar e.
  • Use models seguros e configuracao gold images do sistema operational e das management. Estas reduzem os problemas com configuracoes inadequadas measures. Also o provisionamento maquinas tolls deve obedecer an entrar em being Produção antes criteria preestabelecidos.
  • Members of recursos para avoid attacks do tipo back.

  Client side:

  • Practices of mercado Seguir para a Segurança sistemas operacionais back. OS administradores should seguir as mesmas rules used no ambiente interno relativas to back sistemas operacionais, como manter os last Segurança no patches of Segurança configuracao gold images.
  • Following to encrypt data. Dados follows sistemas important should mantidos encriptados forse ainda but os possíveis ataque para ser to rede.

  Espero ter helped.

• Compare pathItem.fillColor to no fill

  I am running a simple script that checks a certain layer for any circle that is not properly colored.

  I have 4 circles and 1 line on my test document. I check to see if any item on a specific layer 'circles' are.

  

  Two circles filled and stroked correctly and two incorrect. Then a line (between the 2 red circles) is NOT supposed to be on this layer and has a fill color of None.

  When I run the following script, I get the result that they are 3 correct circles and 2 incorrect circles. The line between the red circles arrives as correct. No idea why?

  #target illustrator
  var doc = app.activeDocument;
  var allLayers = doc.layers;
  var noColor = new NoColor();
  var allLines = doc.pathItems;
  var correct = 0;
  var incorrect = 0;
  
  
  for (var i = allLines.length - 1; i >= 0; i--) {
    if (allLines[i].layer == "[Layer Circles]") {
    if (allLines[i].strokeColor.gray == "100" && allLines[i].fillColor.gray == "0" && allLines[i].fillColor != noColor) {
    alert("Correct");
    correct++;
  
  
    }
    else {
    alert("Incorrect");
    incorrect++;
    }
    }
    }
  
  
  alert(correct + " correct circle and " + incorrect + " incorrect circles");
  
  
  

  OK, I'm awake now...

  It seems to work.

  I hope that's what you want...

  var doc = app.activeDocument;
  doc.selection = null;
  var correct = 0;
  var fixedS = 0;
  var fixedF = 0;
  var lines = 0;
  var layer = doc.layers.getByName('Layer Circles');
  var item = layer.pathItems;
  for (var i = item.length - 1; i >= 0; i--) {
          if (item[i].closed){
              checkItem(item[i]);
          }else{
              item[i].selected = true;
              lines++;
          }
  }
  var fixedTot = item.length - correct - lines;
  alert("Of a total of " + item.length + " Items, \n" + correct + " Correct Items. \n\n" + fixedTot + " Items were fixed, \n" + fixedS + " needed Stroke fixed, \n" + fixedF + " needed Fill fixed. \n\n" + lines + " Open pathes have been selected \nand need to be removed from this layer.");  
  
  function checkItem(item){
    var ok = 0;
      if(item.strokeColor.cyan != 0 || item.strokeColor.magenta != 0 || item.strokeColor.yellow != 0 || item.strokeColor.black != 100){
       item.stroked = true;
          item.strokeColor.cyan = 0;
    item.strokeColor.magenta = 0;
    item.strokeColor.yellow = 0;
    item.strokeColor.black = 100;
    fixedS++;
    ok++;
      }
      if(item.fillColor.cyan != 0 || item.fillColor.magenta != 0 || item.fillColor.yellow != 0 || item.fillColor.black != 0){
          item.filled = true;
          item.fillColor.cyan = 0;
    item.fillColor.magenta = 0;
    item.fillColor.yellow = 0;
    item.fillColor.black = 0;
    fixedF++;
    ok++;
      }
      if(ok==0){correct++;}
  }
  

• Show and hide the problem of groups (topics) of Param

  My plugin brought fairly complex has quite a few settings, I've grouped using topics to keep things neat. The user can choose which limits to start or stop using a checkbox for each. Turn on a checkbox displays the settings group; turn off, cover the group settings. I use the following code in a function called from PF_Cmd_USER_CHANGED_PARAM and PF_Cmd_UPDATE_PARAMS_UI:

  AEGP_StreamRefH wfm_streamH = NULL;

  A_Boolean hide_wfmB =! params [QPGA_SCOPE_OPTION_WFM]->u. bd. value ;     The value hide_wfmB to the inverse of the value of the checkbox

  AEGP_EffectRefH                    meH                                                  = NULL;

  AEGP_SuiteHandler suites (in_data->pica_basicP);

  ERR (suites. PFInterfaceSuite1 ()->AEGP_GetNewEffectForEffect(NULL, ->effect_ref, & meH in_data));

  Example - waveform monitor only, but in the code for real there is one of these for each of the groups of five range

  ERR (suites. StreamSuite2 ()->AEGP_GetNewEffectStreamByIndex(NULL, meH, QPGA_WFM_TOPIC_START, & wfm_streamH));

  etc...

  Visibility Toggle of the parameters

  ERR (suites. DynamicStreamSuite2 ()->AEGP_SetDynamicStreamFlag(wfm_streamH, AEGP_DynStreamFlag_HIDDEN, FALSE, hide_wfmB));

  etc...

  if (meH) {

  Err2 (suites. EffectSuite2 ()->AEGP_DisposeEffect(meH));

  }

  if (wfm_streamH) {

  Err2 (suites. StreamSuite2 ()->AEGP_DisposeStream(wfm_streamH));

  }

  etc...

  It works fine when the check box is selected, but the problem is if I save my instance effect as a preset of effects. When I apply the preset to a new layer, I get for example, all parameters in the hidden groups appear less their group themes, when they should be hidden. These two images show what controls should look like, and what they look like:

  Expected result:

  

  Actual result if the application via an effect preset:

  

  Settings between the red lines are those of the four other groups that should not be displayed.

  I hope this makes sense. My hunch is that I have to disable sur-ou * every * parameter within a group. This will require a lot of flow Ref handles well and seems a little inelegant/inefficient!

  One thing I do not use sequence data - I tried this because he was part of the sample project (master of work, I think), but it did not affect the result. I thought that the sequences were a red herring here anyway.

  Thanks in advance!

  Christian

  Unfortunately, you can't hide/show each param within a group, or such bugs happen. (for example, which appears in the timeline panel is touch-ups)

  However, as the coding of the problems come, is not a problem. only a nuisance.

  (and you're right, the sequences have nothing to do with this problem)

• Creating a sidebar which increases with the height of the page

  Hey guys,.

  Currently, I am trying to create a menu bar vertically on the left side of the page, with a red rectangle in the background behind. How can I make the red rectangle grow in height of exponentially with the size of the page? The red rectangle is created in one of the master pages, with the page being 700 in height. However, when placed in a page with for example 900 in height, there is a white space between the red rectangle and the footer.

  I tried to adjust the rectangle as a footer, but it creates an empty space at the top instead-.-. Expand the rectangle to be longer that the height of the page in the master page has resulted in the foot floating above a space empty underneath, where the red rectangle continues.

  Thank you!

  The answer below is given for a similar situation. The difference is the user wanted to use a thin line as the page has grown. I think you can use the same formula, simply change the size of which is shown below.

  Note: this works only on a solid color background.

  4 Zak Williamson (Adobe).

  Since your background is a solid color, you can use a 1 pixel high image that corresponds to the width of your page wide (960px) and import it into the Page indicate and set it to repeat vertically. As a repeated vertically page fill it appears as a solid vertical line and always go all the way to the top of the page to the bottom.

• Change the spacing below heads

  Hello

  I would like to close up the space under the heads on a single page of the site I designed.

  Here's the url:

  http://www.elynncohen.com/ClientArea/seminarsandworkshops.html

  I wish there was less space between the Red heads who say Career Exploration

  Education, College Search and Admissions, etc.

  Would appreciate a good tip on how to do this and how to do it without making all the other leaders throughout the site.

  Thanks in advance

  Elynn

  You do not actually use the HTML headers for these 'heads '. They are simply paragraphs.

  Instead of your strong style for content p rule, create a class as follows:

  {.bullet-intro

  margin-bottom: 0.25em; / * adjust to taste * /.

  color: #C60651;

  make-weight: bold;

  }

  Then apply the class to the paragraphs. You must not either of the .

• Background should go

  I'm trying to remove the red background, so I can put the cables on a easier to see the bottom.  The picture is not very clear and the Red bleed more on cable material.  Any thoughts on how to go about this clean and make the images sharper and cleaner?

  Thank you

  

  Use an Image-> calculations between the red and green channels with the blending mode set to the difference. The resulting mask should be very close to the final version, you'll need to do is apply a bit of levels/curves and some Dodge/Burn there where it is needed.

• Newb flash cannot get a SWF to work in a DW MX 2004 html tag

  I try Flash CS3 with my trusty ol ' Dreamweaver MX2004 on Mac OS 10.4.9. I had another DW site active for four years; This is the first time I tried Flash.
  
  The swf file plays as expected (I posted it for the reference to www.somethinghappeninghere.com/happeningintro.swf), but I can't get to DW to recognize in my index.html (www.somethinghappeninghere.com). I tried to insert my .swf in accordance with the instructions in ch. 17 book H.O.T. CS3 Todd Perkins, in aid of Dreamweaver Insert > Flash menu command. I found another tutorial who spoke of 'skins' (huh?) in DW CS3, but I can't find used them to my MX2004.
  
  I also have the file "happeningintro.html" corresponding to when I published the swf - but I can't find anything that refers to the instructions, it.
  
  Please send suggestions and details to [email protected]. I am entirely willing to give me a dope slap when Iearn whatever detail I have neglected. Thank you.

  Urgh. Found my blunder. Duh - I forgot to download the swf file.

  Four years using DW and Transmit and still that. Sheesh, I hope that I can remember the difference between the red and green lights when I'm driving to work this morning.