Parameretize automatically with a script code

Similar Questions

• Open ssh server files automatically with apple script

  Hello from respected people

  I am trying to build an apple script first terminal connection open ssh with details and after connecting, it will open a python script which is on ssh server automatically. I want to do all these tasks in a script unique apple. I already tried to build automatic ssh connection and I did. but I am facing problem, how can I call a python script in ssh server automatically.

  as if I had a python files in ssh server /home/exe/ai.py

  so I want whenever I run Apple script it connect in ssh and ai.py opens automatically.

  I'm new in the apple script please help

  I tried it here 3 days but no luck, please help me

  At first glance, it seems to me that you need to refresh your ssh.

  # ssh some.host python /home/exe/ai.py

  will ssh to the specified host and run the command "python /home/exe/ai.py".

  To run this via AppleScript, put it in a shell script command:

  the shell script "ssh some.host python /home/exe/ai.py.

• Automatic updates (KB2656353 & KB2656370) always fails with the error code 0 x 643

  Automatic updates (KB2656353 & KB2656370) always fails with the error code 0 x 643 for several occations and continue to offer. Several attempts to install manually also failed. Help is very appreciated. Thanks: SEBUBE

  Automatic updates (KB2656353 & KB2656370) always fails with the error code 0 x 643 for several occations and continue to offer. Several attempts to install manually also failed. Help is very appreciated. Thanks: SEBUBE

  Try each of the methods of repair HERE. If none of these solves the problem, we'll go from there.

• Hello, I recently created a website for a client. I also created a brochure with a QR code that automatically redirects visitors to a single page in the site. Well, I had to make changes to the site and I had to change the name of the page in which t

  Hello, I recently created a website for a client. I also created a brochure with a QR code that automatically redirects visitors to a single page in the site. Well, I had to make changes to the site and I had to change the name of the page in which the QR code pointing to. Is it possible to keep the current name of the page but create a page of automatic redirect named like the QR code? Basically, the brochures have all been printed already, so I need the QR code when analyzed in order to continue working. Now, it is not the case.

  Nevermind, I figured it. I've reproduced the page, renamed the QR that indicates the code of the page, and then he hid in the menu of page properties.

• KB2183416 Windows Update for IE8 repeatedly fails with the error code "WindowsUpdate_8007371C" "WindowsUpdate_dt000"

  KB2183416 Windows Update for IE8 repeatedly fails with the error code "WindowsUpdate_8007371C" "WindowsUpdate_dt000"

  Whenever I run this update, it seems that it installs about 90% of the way but then stops and breaks down about 20 seconds later.  If someone else sees this problem and is at - it a solution?  I'm running Vista Home Premium SP2 and KB2183461 is listed as a critical update for my system.  Help?

  Preliminary stage: If the Tea Timer of Spybot is enabled, please disabled until we finished this thread. Seehttp://aumha.net/viewtopic.php?f=26&t=32409

  Tip: If you don't fully understand what Tea Timer does and how it does, leave it disabled permanently.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  McAfee applications (and Norton) are known for not not upgrade (or uninstall) "clean". If you have McAfee Security Center installed since you bought the computer, he is been updated (automatically) several times. Try the following:

  1. run this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

  2. after reinstallation of McAfee Security Center to step #3 patch triple, manually & repeatedly updated McAfee Security Center until you get one invite "no updates more".

  3. OPTIONAL: If you have had problems with IE8, open IE8 (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  4. OPTIONAL STEP: Open IE8 (only) to http://support.microsoft.com/kb/971058 & run the difficulty by DEFAULT inside and modes and AGGRESSIVE. [1]

  5 restart and test by launching a manual check of updates & see if KB2183461 now installs. See...

  How will I know if my computer is up to date?
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-can-I-tell-if-my-computer-is-up-to-date

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or updates installed (Vista & Win7).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Update of security Suites KB2596615 Microsoft Office 2007 keeps fails with Ox92D error code

  Original title: KB2596615 of Suites Microsoft Office 2007 security update keeps failing

  The automatic updates of Microsoft listed that it is impossible to install the update of security for MS Office 2007 suites KB2596615 with an error code of Ox92D.  What does that mean? Anyone else had this problem and what to do?

  Hello

  You are able to install all other updates?

  If the problem is specific to this particular update, I suggest you to refer to the article below and run the FIXIT mentioned in method 2 tool and perform the steps mentioned there. If you are not able to install some other updates as well, I suggest you to perform all the above troubleshooting methods.

  You cannot install updates after a repair of Windows XP or after Windows XP SP3 is installed immediately after a clean install of Windows XP SP2: http://support.Microsoft.com/kb/943144
  Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756/

  You can also see the following article for more information.
  MS12-057: Description of the 2007 Office system (MSO) security update: August 14, 2012: http://support.Microsoft.com/kb/2596615

• kb2686509 updated Microsoft fails with the error code Ox8007FOF4

  original title: microsoft updates fails with the error code Ox8007FOF4

  My automatic microsoft update fails, I tried the manul update that also fails, I get an answer of (kb2686509) and an Ox8007FOF4 error code is their someone out there with an awnser

  http://support.Microsoft.com/kb/958051

• Windows update fails on XP Pro SP3 with 0x8007F064 error code.

  Windows update fails repeatedly on XP Pro SP3 with 0x8007F064 error code:

  Update security for Windows XP (KB2661637)
  A security update cumulative for Internet Explorer 8 for Windows XP (KB2647516)
  Update security for Windows XP (KB2660465)

  Update works fine until yesterday. Microsoft tool ran (no change), reloaded Windows Update (no change), a tool for malware own virus check comes to nothing. Any ideas?

  Since it is a Dell computer, chances are a Norton or McAfee free trial is preinstalled. When you have done the clean install, the free trialware would have ALSO reinstalled (but not valid now).  Let's see if the execution of two removal tools & a few tweaks resolves the behavior.

  [You can print these instructions for reference offline. [If a step said to restart, restart! ]

  1. click right on the following link to download the Norton removal tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  1B. right click on the following link to download the tool McAfee Consumer Product Removal, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. double-click on the file that you saved in # 1 a above, to run the utility. DO TAP not your keyboard until the race ends, then restart.

  3. double-click the file that you saved in # 1 b above to run the utility. DO TAP not your keyboard until the race ends, then reboot again.

  4 start | Settings | Control Panel | Add/Remove programs. Set Program Access and Defaults: select (check) the CUSTOM [<>] configuration option, and then click the arrows pointing to the far-right | Browser: select "Internet Explorer" here (to not "use my current... »). [1]

  Illustration: http://teamtutorials.com/wp-content/uploads/2007/05/set-program-access-defaults-02.jpg

  If you return to check the out parameter #1 above, it'll be "Use my current..." "but now it's going to be"point"to IE so that you don't need to change anything or reset. [Think of it.]

  5. now check your settings here: IE tools | Internet Options | Programs | Default web browser: If the make default button is NOT dimmed, click/press it.

  6. open Internet Explorer (only!) to http://support.microsoft.com/kb/923737 & run the difficulty.

  Note => for best results, check the option Remove personal settings .

  7. IMPORTANT - don't SKIP THIS STEP! Open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 of => [ignore the title & symptoms].

  7B. do disappear/close the troubleshooter automatic pop - up; then...

  7 c. run difficulty he 50202 in DEFAULT modes and AGGRESSIVE. [2]

  8 restart once more.

  9. open Internet Explorer (only!) at http://windowsupdate.microsoft.com . Select CUSTOM and scan | See if you can install all the available now security updates (i.e., KB2660465, KB2647516 or KB2661637).

  -Online if an update of root certificates is listed under the category of updates software optional on the left side of the window of scan results, install it to enjoy greater security of IE8. [3]

  Tip: Do NOT install any other updates software optional or any updated material in option .

  10. in response to this post with a status report.

  Good luck!

  ==================================================
  [1] once you get the missing updates installed, do not hesitate to make Firefox default browser.

  [2] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove programs.

  [3] MS provided the distribution of a new version of update root certificates on Tuesday, 28 Feb-12. Until then, the update root certificates , released on 22 Nov-11 will be offered. MS usually new versions of root certificates update releases every 3 or 4 months.

  [Last updated - 24 Feb-12, 19:47 UTC]

• I get a message says "the site is unavailable at this time" with the error code [0 x 80070424].

  Original title: error code [0 x 80070424]

  My security alerts continues to tell me that the automatic updates are disabled. I check in the Security Center, and they are in position "on", but it won't download updates. When I go to the Microsoft website to update directly, I get a message says "the site is unavailable at this time" with the error code [0 x 80070424]. Microsoft doesn't even have it classified as a potential error code. I checked the status of the Fund Manager and it is set to "Auto" and it is started, but does not resolve the issue.

  Hello

  You did changes to the computer before this problem?

  Try the troubleshooting provided in the article below steps and check if it helps.

  Error message when you use Microsoft Update or Windows Update Web sites to install updates: 0 x 80070424
  http://support.Microsoft.com/kb/968002

• HOW CAN I FIX A SCREEN BLUE, WITH STOP ERROR CODE: 0X0000007E (0XC0000005, 0X89F24OAE, 0X8A953BA0, 0X8A95389C)

  HOW CAN I FIX A SCREEN BLUE, WITH STOP ERROR CODE: 0X0000007E (0XC0000005, 0X89F24OAE, 0X8A953BA0, 0X8A95389C)

  Hello

  Please do not type in capital letters because it's difficult to read and considered to be shouting.

  ---------------------------------------------------------------------------------------------------

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive download collected files and after shot/screenshot.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  The system has RAID? If so, it's also very suspicious.

  This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
  may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
  can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
  methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  BCCode: 7F 0x0000007E which is also 0x1000007E

  Cause

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
  interpret, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
  the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the
  • Reference of the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
  (the address of the exception) must identify the driver or function that caused the problem.

  If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
  has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
  Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Make sure all new hardware that is installed is listed in the
  • List of Microsoft Windows Marketplace tested products.
  • Service driver or defective peripheral system. A service driver or defective peripheral system can be
  • responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
  • and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable
  or remove drivers or services that have been recently added. If the error occurs during startup
  sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
  Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
  in Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third remote
  control program. If this software is installed, you can remove the boot of the computer service
  by using the Recovery Console, and then by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the
  device or the driver that generated the bug check 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You should also
  Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
  For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or
  Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
  BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
  space, reduce the number of files on the disk drive hard target. Find and delete any temporary
  the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
  contain fragments of file saved to disk scans. You can also use another hard drive with more drive
  free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">
  * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

  ----------------------------------------------------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
  However, there are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Does not work
  tell all possible driver issues).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Windows Update KB979482 always fails with 8007065E error code

  KB979482 fails with 8007065E error code. All other updates are successful.

  Running Windows Vista Edition Home Premium SP2.

  Here are a few excerpts from C:\windows\windowsupdate.log:

  ... ~ snip ~

  DnldMgr * updates to download = 1
  Agent * title = update security for Windows Vista for x 64-based systems (KB979482)
  Agent * UpdateId = {8D253BCE-EB56-47C2-AA58-E5D3F7173CC9}.103
  Agent * bundles 1 updates:
  Agent * {BD1DEFF4-A43A-455A-8174-6050A6010AE4}.103
  ... ~ snip ~

  Automatic update fails...

  ... ~ snip ~

  Manager of FATAL: UH: 0x8007065e: CreatePackage failed in CCbs::CreatePackage
  Manager of FATAL: UH: 0x8007065e: StartStagePackage failed in CUHCbsHandler::StageCbsPackage
  Generation of FATAL Manager: request for CBS full update with hr = 0x8007065e and pfResetSandbox = 0
  Manager of FATAL: Source of error is 106.
  FATAL DnldMgr: DM:CAgentDownloadManager:GenerateAllDownloadRequests: GenerateDownloadRequest failed with 0x8007065e.
  DnldMgr error 0x8007065e occurred when downloading update; notification of dependent calls.
  ... ~ snip ~

  So I tried to download KB979482 here:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=9622 and run it standalone.

  However, when I try this, Windows Update Standalone install displays the message"this update does apply to your system."

  I can live with that (if the message is actually true). But if if this patch does not apply to my system, then why Windows Update keep trying to install it as an update 'important '? How can I get off the list so that the Windows Update log is not cluttered with all of the failed attempts?   Finally, I ran Windows Update Fixit tool available.  He fixed a couple of things (default location, another minor config) but not this problem.

  P.S. running BitDefender 2012 if it matters...

  To answer my own question, you can reset the status of the following method KB2509997 8 download and rename the folder C:\Windows\SoftwareDistribution. It would be nice if there was a less force brute to do this, because she loses all your update story and settings, but at least it works.

• There is an update of security which will not be installed. It comes back with an error Code 66A. Any ideas?

  There is an update of security which will not be installed. It comes back with an error Code 66A. Any ideas?

  Hello

  wrong forum

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

  or please repost your question in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Need help with a script customized for processing in Photoshop CS4 of images in batches. Really grateful for the help thereby.

  Hi people.

  So I have a boatload of pictures that I have to deal with as I'm moving off Ebay and open my own online store and the images that I have on Ebay, although excellent quality are not square, and unfortunately, the model that I use in Wordpress requires square photos.

  Basically, what I need is a script that I can use in batch mode, which will focus on the size of the image and change the canvas size to be square corresponding to the current long image side. Resize the image to 1600 square pixels and finally save for web in JPEG quality 60.

  Normally I would muddle my way through this trying to teach myself but I already do so much with this new project that I can't afford to pay developers for help that I would really appreciate if someone could help me with this script. I use Photoshop CS4 if it made a difference.

  Thanks much for any help you can offer.

  See you soon,.

  J

  A simple gesture can do that. What you need to do is that the action of lot.   With the help of Photoshop Image Processor script.  The Action is a two-step

  N ° 1). File menu > automate > fit Image.  In the dialog box Image Fit you assign Width and Height 1600 pixels.

  Step 2.) Menu Image > canvas size.  In the canvas size dialog box, you assign Width and Height 1600 Pixels.

  Record the action in some action with a name like 1600PxSquare

  Then use the file menu to Photoshop > Scripts > image processor. In the dialog to the Image Processor script. Select your image source folder. Set where you want your jpeg images. Set it to save jpeg files quality 6.  Set it to include your 1600PxSquare action.

  Step adjustment image resize your image to fit in a 1600 x 1600 pixels are while keeping image proportions of images. Portrait image will be high 1600px and landscape image will be 1600px wide.  The step size canvas will add the canvas to make the place of the image.  Portraits will have a border on the left and right images of landscape will be confined to the op and downs.

• How to remove the selected area with a script that would ignore the fact if the selected area is transparent or the fact that it has no selection?

  Hello

  My friend works on an action, who would edit images by removing the white background color. However, there are a lot of images with transparent background or after some other actions have no selection who had to be removed. And now he is facing simple problem, simple remove this feature brings a lot of table and the error Stops.

  The ideal solution to this problem would be if it would ba a script who could remove the selection and ignore stops as no selection and transparent.

  Can anyone help with this one?

  Settle into the Photoshop scripts forum.

  With a script, you would just put your code in a try/catch block. This intercept errors such as the selection of a transparent area and do not stop your script:

  try{
       //your code here
       }
  catch(e){
       //either no code, or code to do something if you get an error.
  }
  

• taken IFRAME supported by script code in the head section

  Hi all

  I'm having the following problem. I need to insert an iframe with the content of XE currency converter. This requires a script code in the head of <>< / head > section and the iframe in the body. With Xara, I used until recently, it was a piece of cake, because in a single window, the two codes could be inserted in the sections on the window. So my question is there a widget that is doing the work or how to make this work.

  I tried with the html objects putting the code at the top of the page and the iframe section where it belongs. I tried to put the two codes in a html object. None seems to work.

  Thanks for the support.

  Kind regards

  Rufin

  Hi Eric, sorry for the late reply. Yes I did, and it did not work. I've been tweaking a little. I don't know if it's the rule or the exception. But being a little desperate trying all combinations. Which doesn't seem to work, it's that put codes of head and body in a html object with what should be in the head section properly labeledand the part of the body without the tags. This method works. But it would be much easier if the page properties allows to have also a field for thecode.

  In any case thank you for helping to think with me.

  Concerning

  Rufin