Parameters registry Highway 2007 error message

Similar Questions

• Cannot open the com files and executable file in the Original Windows Vista Software activated after updates to the registry and cleaning, error message and all the setup.exe files has been disabled, why?

  I use Vista Ultimate SP2 preloaded o/s and windows is activated with a genuine problems with executable files with product of what ID 89580-OEM-7332132-00031 on PC, the problem happens when I'm uninstalling some registry tools, the error message I got was 'impossible to connect to the microsoft client group policy server' and whenever I try to run the executable file .exe or .com I get error messages "the windows don't. not find the environment option that was entered path c:\windows\system32\msconfig.exe for example. What is your solution if all the drivers I downloaded from microsoft Update site and support Web is unexecutable because of registry files missing that causes all the executable files and com files to display error messages when clicked. What was missing in the original windows registry files after running the tool registry optimizer? What was missing in my windows vista original? Need help 4th level or windows file recovery software onwer.

  I was able to surf the internet, able to do facebooking, capable of voip webcam and chat however installation and admin work on operating system software has been disabled due to lack of the registry files all the executable files was disabled after a registry cleaning registry optimizer and all the setup.exe has been disabled when I run saying them I don't have permission to run setup.exe because I like not connected to the microsoft Group Policy Server, but it is an original windows software, I can download files from the microsoft Web site and save on my drive hard but cannot run the executable installation files, which was lacking in system files that stopped all the executable files to run, except the internet broadband. Need help 4th level or windows file recovery software onwer

  Hello

  Method 1:

  I suggest you to do a scan of the SFC. File system (CFS) Auditor verifies that all Windows 7 system files are where they should be as they are by default and not corrupted, changed or damaged.

  a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.

  b. click on continue or provide administrator credentials if prompted.

  c. in the type in the following command prompt window and press ENTER:

  d. sfc/scannow

  e. you should see the following message on the screen:

  § Begin the analysis of the system. This process will take time.

  § Beginning verification phase of system scan.

  f. % verification complete.

  g. once the scan is complete, a test to see if the problem you are experiencing is resolved or not.

  For more information, see the article mentioned below.

  http://support.Microsoft.com/kb/929833

  Method 2:

  Create a new account user has administrator rights and check if you are able to install applications or not. Follow the steps mentioned in the article below.

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Method 3:

  I suggest you do a system restore and check. See the article mentioned below

  System Restore: frequently asked questions.

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Registry file c0000218 Error Message

  Answer:

  I have a Dell Dimension 5150 (Windows XP) that until recently was working fine.   When you turn on now I get the following error message:

  STOP: c0000218 (registry file failure).  The file of registry cannot load the hive (file): \systemRoot\System32\config\SOFTWARE or its log or replacing.   It is damaged, missing, or not accessible in writing.   Beginning physical memory dump.  Total physical memory dump.  For more assistance, contact your system administrator or technical support group.

  Can you help / tell me what I need to do.  I'm not particularly computer literate so feel free to give me an idiots guide.

  Thank you

  You have a Windows XP CD?  You need start the recovery console to resolve this problem, or you will need to mount the drive in another computer.  If you do not have a Windows XP cd, you can download an .iso file on the net Recovery Console a burn to a cd.

  Start the recovery console, run chkdsk /r on the drive and see if that fixes things.  If the computer still shows the same error after running chkdsk then see here:

  How do I recover from a corrupted registry that prevents Windows XP startup

  http://support.Microsoft.com/kb/307545

  Description of the Windows XP Recovery Console for advanced users

  http://support.Microsoft.com/kb/314058

  If you do not have a Windows XP CD, you can download a recovery here Console .iso file:http://www.tweakxp.com/article36941.aspx and burn it to a CD and use it to start the computer.

  John

• I get an error message "Cannot load or launch C:Users\Mike\AppData\Local\Temp\msuospuwo.exe specified in the registry" at startup.

  At startup I get the following error message: "cannot load or launch C:Users\Mike\AppData\Local\Temp\msuospuwo.exe specified in the registry. Make sure that the file exists on your computer or remove the reference to it in the registry.  I tried to run my antivirus program, CCleaner and system fFle Checker, but the problem persists. How can I fix it?

  Original title: persistent registry at startup error message.

  Hi Mike,.

  Thanks for keeping us posted and share this information with us.

  I would like to run you a SFC scan.

  See the article-

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

   

  http://support.Microsoft.com/kb/929833

  Do get back to us and let us know the status. We will be happy to help you.

  Thank you.

• Fix error 40 - KB Article ID: 950750 (Multiprocedssor computer Error Message "Stop: 0x0000007E")

  Not sure if this is the right area to post or not... Please forgive if no well want to redirect me to the appropriate area.  Thank you!

  Problem: Error Message When you start a multiprocessor computer that is running Windows Vista: "STOP: 0x0000007E"

  I downloaded the recommended fix and it - installed during installation, it does not end and gives the following error message: an error occurred in uncompressing.  One or more files were not unzipped successfully.  The error code is 40.

  Please notify.  Thank you!

  ______________________________________________________________________
  (Article ID: 950570 - last review: April 24, 2008 - revision: 1.2)
  Error message when you start a multiprocessor computer that is running Windows Vista: "STOP: 0x0000007E")

  http://support.Microsoft.com/default.aspx/KB/950570

  When you start a multiprocessor computer that is running Windows Vista, you may receive the following Stop error message:

  STOP: 0x0000007E (parameter1, parameter 2, parameter3, parameter4)
  NETIO. SYS

  This occurs usually after a driver for a third-party network adapter is installed.

  Notes

  • The parameters in this Stop error message vary according to the configuration of the computer.
  • Not all "0x0000007E" Stop error messages are caused by this problem.

  Hello gardeneva,

  Thanks for posting on the Microsoft answers Forum.

  Regarding the patch you downloaded for KB 950750, you may have a corrupt hotfix package or can you download the bad patch for your platform.

  There are three platforms for download:
  x 86, x 64 and ia64.  Is your platform a 32-bit or 64-bit?

  The fix should detect which system you have.
  For example, on my system:

  We have detected that you are currently using a browser that has these attributes:

  Platform: x 86 Language: English (United States)

  At this point, you can ask to download only the file to my system or you can view all three packages.
  Please see if you can copy the file downloaded on another system and try to unpack.  Or try to download another package and see if you can decompress this file. What do you use to unpack the file?

  If please post again and let us know if you are able to unzip the file and install the strongest hot or if you need further assistance.

  Sincerely,
  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Disabling error messages?

  I use photoshop CS5 Extended version 12.1 x 64 to work designing banners. The process involves me using pre-existing photoshop templates that are used over and over again. These models have been created God knows when and as such there are diapers with missing fonts, but they are hidden and unimportant for my task. Everytime I open the models that I get an error message missing fonts, which reads:

  "Some text layers contain missing fonts. These layers must have replaced missing fonts before they can be used for vector output. »

  

  I am aware of that, and I'd rather not be reminded everytime I open a model, having to confirm that I understand the question, especially when I open 10-20 models at the same time. So my question is, is it possible to set parameters so that this error message stops appearing. I will note thate e also use a customer of universal Type for fonts, which replaces the need for photoshop fonts.

  If I can find a way to disable this error message, it would certainly speed up the process of opening files.

  Thank you!

  Dim

  There is no way to delete a specific error message if there is no [] do not show checkbox, so the best is maybe to get copies of missing fonts...

  -Christmas

• Error message that your registry seetings were not copied correctly

  I have been using Highway 2007 since 2007 with no problems until yesterday, September 23, 2013 when I tried to use it I got the error message that your registry settings for this application were not copied correctly. Rerun the installation program

  I tried several times to put term up all without success.

  Finally, I uninstalled the program and reinstalled from the original disk but still have the same error message.

  Can someone please

  Hi Ron,

  Check out the following link. This could help you.

  Error message when you try to use the streets & trips: "your registry settings for this application were not correctly copied.

  http://support.Microsoft.com/kb/314590/en-us

  You can uninstall a program from the control panel:

  (a) press the Windows and X key to open a list of tasks from the lower left corner of the screen.

  (b) select Control Panel.

  (c) select programs and features.

  (d) double-click the program you want to uninstall, and then follow the instructions on the screen.

  If the problem persists. You can ask your question on the forum dedicated for Streets & trips for assistance on this issue.

  http://social.Microsoft.com/forums/en-us/home?Forum=streetsandtrips

  I hope this helps.

• I tried to upgrade from Microsoft office 2003 and 2007, and I get this error message: Error 1606 could not access network location %AppData%.

  Now, I can not uninstall, repair Office 2003 or 2007. and my microsoft office 2003 documents are less error out when I try to open them.

  Hello Answerspls09,

  Thanks for providing the information.

  Solution:

  Check with the below weblink.
  __________________________________________________________________________________

  "You receive an"Error 1606"error message when you try to install or remove a program from Microsoft"

  http://support.Microsoft.com/kb/886549

  __________________________________________________________________________________

  ["Windows Installer Error 1606" error message when you try to launch help in Office 2000 programs]

  http://support.Microsoft.com/kb/313257
  __________________________________________________________________________________

  That should solve your problem.

  Thank you. UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO. C

• Always impossible to install updates to security KB2596871 and KB2598041 (2007 Microsoft Office Suites), get error message 0 x 80070658

  I said not able to install security updates KB2596871 and KB2598041 (in Microsoft Office 2007 Suites) for nearly two weeks on my machine, get error message 0 x 80070658.  I saw no solutions to this problem on my machine (running XP Pro x 64), and tried to launch Microsoft Fix It to solve this problem.  What is

  Thanks for any help!

  Walt

  Hi Gekko,

  1 have you made changes to your computer recently?

  2 are you facing this problem with all Windows updates?

  3 have. what Microsoft Fix - it you tried to solve the problem?

  I suggest you to follow the steps and check if it helps.

  Method 1: Perform a clean boot, and then check if it helps.

  How to configure Windows XP to start in a "clean boot" State

  Note: Make sure you perform the steps in How to configure Windows to use a Normal startup state from the above link.

  Method 2: Follow the link and run Microsoft Fix - it, and then check if it helps.

  Diagnose and automatically fix common problems with Windows Update

  Method 3: Repair the installation of Microsoft Office 2007 and check if it helps.

  (a) go to Start.

  (b) click on Control Panel and click on Add / Remove Programs.

  (c) select 2007 Microsoft Office and click change.

  (d) click on repair.

  Method 4: Install manually updates, then check if it helps.

  To install updates manually by following the steps mentioned below.

  (a) go to http://www.microsoft.com/download/en/default.aspx

  (b) research updates using the KB number for the update.

  (c) download and install it.

• Message registry or dll error ref: ocbqpyhm.dll

  I inherited a PC with XP; have updated & downloaded takes the power. However, whenever I have starting, a "RUNDLL" window appears with the follwing message... "error loading C:\windows\system32\ocbqpyhm.dll' 'the specified module could not be found'... it gives me the ability to click 'OK', what I do and I works without any problems afterwards (surf, email, word, excel, etc.)." HOWEVER, I 'searched' my drive C, Microsfotsupport.com, etc. and 'no files are. I tried to 'run' file of the 'guest' and always without success. I 'google' ocbqpyhm.dll and even in this case there is no file which can be found. Any help to identify what 'this DLL' is 'supposed' to do, and if I really need it will be appreciated. Finally, if I did NOT need, how I eliminate the error message window from popping up whenever I start?

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• Crash when updates at shutdown lead Error message 'one of the files in the registry database had to be recovered by use of one newspaper or another copy. Recovery succeeded. »

  Yesterday, I was using my laptop at the farm level is critical. When I stopped him, 9 updates began to occur when closing. Unfortunately, the laptop ran out of battery before that update has been completed. When I rebooted the professional windows xp, an error message "one of the files in the registry database had to be recovered by use of one newspaper or another copy. Recovery succeeded. "came and this message constantly comes up whenever I start windows. I have no CD with me as the operating system has been installed by the IT Department of my employer and I do not want to reinstall windows. I do not know how to change, and then make the changes in the registry via regedit. If anyone know to solve this problem, I would appreciate your help. I never wait for windows updates could cause such problems.

  Hello

  • Your computer is on the field?
  If it is connected to a domain, then you can post your query in this link:
  http://social.technet.Microsoft.com/forums/en-us/categories
   
  If it is not then what is the error message in the history of the magazine update on the windows update site?

  See also fix it for windows updates.

  http://support.Microsoft.com/mats/windows_update/

   

• Error message, Windows no disk Exception Processing Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75c6bf7c? This error message appears on start up, but will be closs after several attepts.

  Error message, Windows no disk Exception Processing Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75c6bf7c? This error message appears on start up, but will close after several attempts.

  The message above appears on start up. Want to know how to prevent it from happening?

  Hello

  • What were the changes made before the show?
   
  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222
   
  b. it is a possibility that there is a startup program that is launched with a command line and it appears.
  You need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you have finished troubleshooting, proceed as explained in the article to reset the computer to start as usual.
  I hope this helps.
  
   

• I have three problems___the is first I get the error messages form I mesh and cannot access my profile or friends list ' ___Microsoft online which is a whoosie of my gave me element to modify registry keys but no items exist in the regisry

  I get the error messages form I mesh and cannot access my profile or friends list '

  MIicrosoft online which is a whoosie of my gave me element to modify registry keys but no items exist in the regisry

  For iMesh, you can go here...

  http://www.iMesh.com/community.html

  I don't understand the other two problems that you encounter.  If you please would explain what they are and what, if any, error messages that you receive.  Also, what antivirus do you use, and you run Windows XP SP3?

  --
  Gina Whipp
  Microsoft MVP (access)

  Please post all responses on the forum where everyone can enjoy.

• I get the following error message "Windows - no disk Exception processing Message c0000012 parameters 75b6bf7c 4 75b6b7c 75b6b7c" can someone tell me what this means and how get rid of? Thank you!

  I get the following "Windows - no disk Exception Message c0000013 processing error message
  Parameters 75b6bf7c 4 75b6b7c 75b6b7c"can someone tell me what this means and how get rid of? Thank you!

  * UNPLUG ALL USB DEVICES AND NON-ESSENTIAL TO THE COMPUTER

  If you can, I suggest that you try the following:

  {THE PHASE 1}

  1. click on START

  2. click on "all programs".

  3. click on "Accessories".

  4. click on "system tools."

  5. click on "system restore."

  6 follow the prompts shown to restore your system to a date before the problem started. Although the system restore does not target the personal data, it is recommended that you back up all data such as music, photos and documents in case something is not bad.

  {THE PHASE 2}

  If this does not work, I could do this:

  Reach:

  http://support.dell.com/support/downloads/format.aspx?c=us&l=en&s=gen&deviceid=308&libid=1&releaseid=R45081&vercnt=10&formatcnt=0&SystemID=DIM_PNT_P3C_4100&servicetag=&os=WW1&osl=en&catid=-1&dateid=-1&typeid=-1&formatid=-1&impid=-1

  Follow the instructions to download the version (diskette) indicated secondary. This will require a floppy disk. If you don't have one available, skip this step. Unfortunantly, given the age of this system, they do not offer executable for use within Windows automatic update.

  {THE PHASE 3}

  Reach:

  http://support.dell.com/support/downloads/download.aspx?c=us&l=en&s=gen&releaseid=R42764&SystemID=DIM_PNT_P3C_4100&servicetag=&os=WW1&osl=en&deviceid=1039&devlib=0&typecnt=0&vercnt=1&catid=-1&impid=-1&formatcnt=1&libid=8&typeid=-1&dateid=-1&formatid=-1&fileid=50179

  Download the patch and install it. Then, restart your computer.

  Reach:

  http://support.dell.com/support/downloads/download.aspx?c=us&l=en&s=gen&releaseid=R53986&SystemID=DIM_PNT_P3C_4100&servicetag=&os=WW1&osl=en&deviceid=1039&devlib=0&typecnt=0&vercnt=1&catid=-1&impid=-1&formatcnt=1&libid=8&typeid=-1&dateid=-1&formatid=-1&fileid=63977

  Download the patch and install it. Then, restart your computer.

  Let us know what happens

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot install Office Ultimate 2007 due to the editing error message

  Description of the problem: I have a desktop computer that I built from a kit of WGA (Windows XP Pro with Service Pack 2). This machine is an AMD based system and I had installed SP3 that caused a problem without end. I did a fresh install of XP and you have not installed SP3. This machine has everything installed at the origin of the office suites. I bought an Office 2007 Ultimate on m6mobile.fr store and tried to install it but always comes an error message: "Setup error: the language of this installation package is not supported by your system." I tried to install the software on a second DVD player, but I get the same error. I tried to install the software on my Sony Vaio laptop and it seems to install without any problem but I did not install, I just want to check if the software disk is defective. The laptop has XP Pro SP2 also. Any information or assistance be will greatly appreciate.

  I could solve this problem by copying the contents of the disc on my c drive, open the folder and clicking on Setup.