Partition RAID 5 for Application install on Windows 2008
Cheap DBAI tried to install the application on RAID 5 partition on windows server 2008 with the R12.1.1 OS 32-bit application.
But whenever I failed to install, after doing so many different ways.
but without partition RAID 5, I can able to install the application without any errors.
My question is Oracle Application R12.1.1 suppurt RAID 5 Partition on Windows platform?
Waiting for your quick response.
Best regards
SG
PGO
There should be no problem in using this type of RAID under Windows - contact the vendor of the operating system for more details and they must confirm it.
RAID 5 VS RAID 10
RAID 5 VS RAID 10
Thank you
Hussein
Tags: Oracle Applications
Similar Questions
-
Applications installed on Windows Server 2012 is not visible.
Recently installed a few applications on Windows Server 2012 server by using Local Administrator id.
When we connect using any user of domain/local, we are unable to find the application installed in the 'Apps' & If connect us with the id of the Local Administrator we can browse for apps.
& if any what other domain/local user login he or she can see only a blue screen empty :(
Hello
Please post your question in Server TechNet Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
How to back up the application install on windows 7
well I mess with my permission to the user on one of my computer
so is there anyway I can save all the application install and restore them later after that I formatted the computer?No, no backup, including apps, would be a backup Image, and using these would push the PC to the current position (or at least at the position during the creation of this image)
Try a restore point to a period prior to your violin?
-
Location of Sysprep files for vCenter running in Windows 2008
IM vCenter running in Windows 2008 and can not find the location where the files of the command sysprep sholud go?
see this KB
-
Preparation for the upgrade of Windows 2008 server to a more recent version of IIS
I am preparing a server from IIS 7 to IIS 8.5 upgrade and installation of Wordpress.
Based on my past experience with Windows, I just want answers before you begin the process of upgrading to these questions.
After the upgrade to IIS 7 to 8.5 IIS erases from my old site, and IIS instantly crashes whenever I try to restart it via the services or by doing an iisreset in the terminal, how do IIS running again so I can recharge my virtual directories?
After I installed Wordpress and IIS starts crashing again, how can I me IIS regularly rerun?
When I get to the point where I have two Web sites running on the same server (which the Windows server documentation is both 7.0 and 8.5 are capable of handling), but it turns out that I can't get a site to run at the same time without the server crash, how do I turn to the second Web site so I can follow the two sites up and running?
Arnold
Server issues are beyond the scope of this site and should be asked on the Technet site
http://social.technet.Microsoft.com/forums/en-us/home
-
Creative cloud installer does not install on Windows 2008 RDP server
After that Creative installer download is complete Installer creative cloud Cloud does not initialize to install Desktop App or generate errors
Hi Carlos,
Please see the system requirements | Cloud Creative
Kind regards
Sheena
-
ODI - cannot be installed in Windows 2008 SP2
I downloaded the new hyperion 11.1.2 include ODI and then I extracted the ODI files and I run the Setup, but nothing happens? can I extract the files in the same folder as other files of extracted hyperion?I would try 6.1
See you soon
John
http://John-Goodwin.blogspot.com/ -
Impossible to install 10 Windows on Bootcamp partition
Hello! I just tried to install Windows 10 on my Macbook with a 32 GB USB using Bootcamp. Everything was fine until I came to the part where I have to choose the partition where I want to install my Windows 10 and of course I chose the Bootcamp partition, but in fact I couldn't click on 'next' (I was so stupid and don't format it).
So I just format the Bootcamp partition and when I tried to click 'next' he just told me 'we could not create a new partition or locate an existing one. I went through google and searched all regarding this problem and there are a lot of guys having almost the same or exactly the same 'error' when trying to install 10 Windows on the Bootcamp partition, but nothing has really helped me. I deleted everything except my USB key and someone told me that I should only have 4 partitions or less.
He shows me the 4 partition but there are two partitions (3) and two partition (1).
Is this a problem?
Here is a picture of my diskutil list: https://i.gyazo.com/f554fb8aac609c2420f55f9696fa06a6.pnggiven that English is not my native language, I'm sorry for my bad spelling.
I hope someone can help me install Windows 10 with Bootcamp! Thank you very much!You have a Fusion drive, which is usually not sold on a MacbookPro? You can check model/year your Mac? Please, do not post the serial number of your Mac.
If you replaced the optical drive to create your own Fusion player, you can run the questions, depending on the year/model of your Mac.
-
Need software driver for Windows 2008 R2
Pavilian dv6:
HP Pavilion WB386PA/A5Z91PA #AP
Recently, I bought this laptop with integrated OS and software Bundle. I wanted to install windows 2008 R2 for SharePoint 2010.
After the Windows 7 Home Premium I have uninstall and installed a Windows 2008 R2, I could not able to connect the USB or the network.
It says "Windows doesn't detect a network for this driver." When I checked all devices through the computer to manage menu. All devices are yellow color except the DVD player,I tried to update the drivers for my laptop now. How/where/what download?
GUID me please.
Hello:
If you go into your BIOS under the system information window, you should get a model number.
Or you can use this scan to HP tool to see if you can automatically detect your model number.
http://h20614.www2.HP.com/ediags/GMD/welcome.aspx?LC=en&cc=us
Paul
-
T320 Installer step by step - creating RAID 1 for the OS Installation.
Dear all,
First of all thank we just bought you who read this, a new Dell PowerEdge T320 our business (SMB) server with standard specifications.
Processor Intel Xeon E5 - v2
2 x 4 GB memory
2 x 2 TB HDD (Hot Plug in)
Dual power supply (495W each / Hot plug-in)
Integrated PERC h310 RAID controller.
Now the question is that I want to configure my new server with RAID 1 & to install Windows Server 2008 R2 on it. I did R & D of the Site Support Dell's and some other sites too, now more and more confused on where to start I did not even turn on the server
Could someone please tell me installation guide step by step in order to configure my RAID 1 and then install the Windows Server 2008 R2 on it? As I have seen/wanted here on the pages of the community saw the same question asked by many but could not find the step by step guide.
Thank you!
P.S.: If I forgot to mention something about my request please let me know if I can give you the info (if any) remaining
-
ESX 3.5 U4 and U5 for Windows 2008 R2
Hello
I have a few questions about upgrading ESX 3.5 U4 to ESX 3.5 U5.
I have a farm with 4 ESX 3.5 U4 and I need to install several windows 2008 R2 guest OS so I need you to update to the U5. Is it possible to update a single ESX now to accommodate our new 2008 R2 servers and in a few weeks, to upgrade the rest of the ESX?
I think it will turn off the AP and the vmotion for these comments specific (2008 R2) but what other hosts?
Where is the update? Is it normal that I need to restart the ESX and boot to a CD?
Concerning
JAY
Hi Jay0,
I guess your question, you do not use the Update Manager?
Why would you only upgrade on the host and other later? Are the hosts in the same cluster? I recommend that they all the same version, especially if they are in the same cluster HA.
Although in the answer you're question about the pre 2008 R2 invited they works perfectly in a cluster with hosts U4 and U5 present.
The ESX host will need a reboot, but there are faster ways to update your hosts to reinstall with a cd. You can either copy the update to the host and use esxupdate or my recommended method is to use Update Manager.
Hope this helps
Mike.
-
Cannot install 3 WMF on Windows 2008 SP2 computer
I have a system running Windows 2008 SP2 Enterprise edition OS. I try to install windows management framework 3 so I can get running powershell 3.0 on it and unable to do so. When I run the installation of 3 WMF, I get a message "the update does not apply to your system". On the WMF page, it lists this version 3 can be installed on windows 2008 SP2.
The system has .NET 1.1, installed 3.5 SP1 and 4.5.2. I don't see WMF in the Windows Update list on the server. Suggestions that more I need to install or uninstall?
Thank you.
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
<! [endif]
> <![if gte mso 9] >Can someone help me with the question of the field of windows 2008 64 bit
controller installed in vmware esx 3.5. The situation is that we
installed windows 2008 64-bit domain controller server hs21 blade. There are
separate Exchange 2007 server on windows 2003 64-bit server and it works
fine. After I installed another Exchange in windows 2008 64-bit of the domain
controller take almost 500 seconds to start.
Firs I recreated all the infrastructure twice but it is the same
situation after exchange 2007 is installed on windows 2008. Windows 2008
all updates and exchange 2007 to sp1.
Wrong forum - this is Server 2.0 not ESX.
---
If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.
-
Hi all
Windows 2008 is compatible for R12 install, if so
and please let me know the ID Metalink for R12 installation on windows 2008
Thanks in advance.Hello
Oracle Applications 11i/R12 are not yet certified on Windows 2008.
Oracle Certification Matrix
http://www.Oracle.com/technology/support/MetaLink/index.htmlKind regards
Hussein -
Is there another solution to integrate NAC Appliance and Active Directory on Windows 2008 64 bit
I'm trying to integrate a device of the NAC solution in a network where all domian servers and application servers are Windows 2008 64-bit.
Could someone help me to confirm if Active Directory (AD) on Windows 2008 is not taken in charge and tell me what alternatives exist to authenticate users who consider that it is not possible to make any changes on the server. They will continue to be Windows 2008 64 bit.
The original idea was to use AD SSO to authenticate users, but I read that it is not supported on Windows 2008 64 bit.
I'd appreciate any help or suggestions.
Concerning
Arturo Monroy
Arturo,
You can use LDAP. Configure an LDAP authentication provider and have your customers to provide their credentials.
It will not however a single code access scenario. They would have to enter their credentials again on the NAC agent.
Support for 64 - bit is on its way and will be out in the new versions soon.
HTH,
Faisal
Maybe you are looking for
-
Lost after renewal certificates
Firefox was slow, so he suggested to 'renew' and get rid of the add-ins. What I didn't realize is that eliminated my certificate to identify myself to secure Web sites of the Government institution (in Spain). I'm just in the middle of tax returns an
-
Question G20 on D-video and sound on TV
Good eveningI'm sorry, I guess that there are already a few topics on this issue, but I have a problem with my D-video cable. I use to connect my TV to my computer and everything is all right on the image, but I have not its not more. Some people tel
-
Cannot sweep the all-in-one Officejet 4630
Hi all - help needed please. Recently bought a printer all-in-one Officejet 4630 and had nothing but trouble, set-up and use it. After several attempts to put in place, everything is roughly in order, though I can't yet scan of the control on the mac
-
When my Macbook connect to WIFI my normal PC to the internet cut
First off sorry for my bad English, but as say the title "when my Macbook connect to WIFI my normal PC to cup of the internet. I was playing online games (WoW) on my normal PC I opened my macbook to work with her, and then I saw that I was disconnect
-
How can I make a copy of my Vista operating system
How can I make a copy of my Vista OS Backup I lost the original purposes?