Question G20 on D-video and sound on TV

Similar Questions

• Video and sound glitches windows xp service pack 3

  How can I repair internet video and sound glitches?

  Discover the mfg, go to their web site & get the latest drivers/software.

  Make sure that Direct X is also underway.

• Video and sound on the x 51 Alienware

  I got an Alienware x 51 for a few years already and have always noticed that there are two size HDMI ports in the back.  The manual of the these calls the 'edge' (on the motherboard) port and the port "discreet" (nVidia video card).  I currently have the computer connected to a bar that works then to a TV.  HDMI is my preferred connection type as the Soundbar is not equipped with too besides for the entry.

  Initially, I plugged the HDMI in the quiet port in order to use the video card.  But I noticed by doing this, I have not received any sound.  This kind of sense to me, it's a video card.  But it beats type of the object to a HDMI connection.  Then try the built-in HDMI port gave me both sound and image.  I used this connection for the length of time I've owned the system.

  In diagnosing another problem recently, I received your comments that I don't actually use the video card.  Their logic makes sense, I'm not connected to the discreet port.  Without knowing how the internal mechanisms work, I can't say with certainty.

  I have two questions for someone competent with the Alienware x 51 and it's dual HDMI output:

  1. By using the HDMI Board, am I without going through the video card completely and by using the (I imagine most rudimentary) integrated graphics capability?  The system always use the video card and switch the output via the on-board HDMI?
  2. If I am without going through the video card using the integrated HDMI output, how can I use the video card (and discreet HDMI port) and get her out of the system?  Is this possible?

  Sorry if these are stupid questions, I know a bit about computers.  I did a lot of research on this topic, watched videos of Alienware on the connections and I've seen a few posts on Dell for similar subjects.  But I have not found answers to these questions more precisely.  I would like to know how it works.

  Thank you!

  1 - Yes, you can use the HDMI port and have always discreet video card works as the main source of the image, in some cases (very little) I saw the graphics performance to drop slightly.

  2. don't make sure you had the HDMI as playback device on by default so that connected the port that goes directly to the video card?

  There are no stupid questions. We are all have to start somewhere and you have come to the right place. We are here to help.

• Video and sound on Alienware x 51

  I got an Alienware x 51 for a few years already and have always noticed that there are two size HDMI ports in the back.  The manual of the these calls the 'edge' (on the motherboard) port and the port "discreet" (nVidia video card).  I currently have the computer connected to a bar that works then to a TV.  HDMI is my preferred connection type as the Soundbar is not equipped with too besides for the entry.

  Initially, I plugged the HDMI in the quiet port in order to use the video card.  But I noticed by doing this, I have not received any sound.  This kind of sense to me, it's a video card.  But it beats type of the object to a HDMI connection.  Then try the integrated HMDI port gave me both sound and image.  I used this connection for the length of time I've owned the system.

  In diagnosing another problem recently, I received your comments that I don't actually use the video card.  Their logic makes sense, I'm not connected to the discreet port.  Without knowing how the internal mechanisms work, I can't say with certainty.

  I have two questions for someone competent with the Alienware x 51 and it's dual HDMI output:

  1. By using the HDMI Board, am I without going through the video card completely and by using the (I imagine most rudimentary) integrated graphics capability?  The system always use the video card and switch the output via the on-board HDMI?
  2. If I am without going through the video card using the integrated HDMI output, how can I use the video card (and discreet HDMI port) and get her out of the system?  Is this possible?

  Sorry if these are stupid questions, I know a bit about computers.  I did a lot of research on this topic, watched videos of Alienware on the connections and I've seen a few posts on Dell for similar subjects.  But I didn't get answers to the foregoing specifically.  I would like to know how it works.

  Thank you!

  You can get a better response if you re - post it in the forum of the Club of Alienware .

• Re: All the videos and sounds out of sync

  I have problems playing all kinds of video to my computer, the sound will continue, but the video will lag, freeze and jump. It happens with all programs, I play a video, not only the windows media player, it happens even with youtube videos is not a matter of program.

  Is someone can you please tell me what I can do? I already lowered my display settings so that I now have the basic theme of windows 7 and not the aero theme.
  Nothing seems to work, my laptop as a whole began to deteriorate quite rapidly recently.

  Thanks in advance

  > I have problems to read any kind of video on my computer
  And what Toshiba laptop do you have?
  What operating system do you use?
  The same happens when you use DVD movies?

  Try please test it with VLC player.

• Unsynchronized MP4 video and sound in 7 PREL

  Hello

  I'm doing a video based in some MP4 clips, recorded with my video camera Sanyo. Although the PREL7 import the clips without problem, the sound is strongly not synchronized to the video. This is not a simple timeline or previewing problem, because the unsynchronized issue is also present in the rendered movie. I thought it was a problem of camera, but when I play the MP4 clips in QuickTime player, the result is perfect, and the sound and video are perfectly synchronize.

  I tried to export the MP4 in another format with Adobe Media Encoder, but the problem remains.

  No idea how to solve this will be greatly welcomed

  Thank you

  Valter-Brazil

  Thank you, Valter.

  I understand now why you have problems with this video. It's AVC video - but not HD Premiere Elements can't handle this codec.

  It is possible that the camera came with a program to convert your video to DV - AVI.

  If this isn't the case, it might work.

  http://www.OJOsoft.com/how-to-convert/MP4-to-AVI-Converter.html

• ProBook 450 G1: Question of Probook of video playback in G1 of the 450 after upgrade to Windows 10

  Hello.

  Issues (stop, shaking in the video and sound) are multiply video playback after upgrade Windows 8.1 for Windows 10.

  Questions for:

  -Playback (avi, mkv, mp4 etc.) VMP Movies & TV AND;

  -Playback of video from Youtube by Edge and IE11;

  -Video playback in games.

  NO problem all does to (workaround):

  -Reading of files (avi, mkv, mp4 etc) by VLC player.

  -Video playback from Youtube through Firefox.

  Not any way to workaround that emit in the games: its integrated use of resources of the browser.

  VLC uses own video codecs, so I think that this emission source is possibly in embedded Windows 10 codecs?

  Drivers:

  Intel SoftPaq Download Manager Video drivers (latest for Windows 10: technical support site the same as at HP).

  AMD drivers for Widnows 10 SoftPaq Download Manager (the same that at HP supports the site) is buggy and causes crash (the "internal power error"). If Catalyst drivers from AMD (latest from Windows 10) site.

  Additional drivers, also upgraded for Windows 10 (via the SDM for Windows-10): chipset keeps drivers, WiFi, 3D etc.

  Any ideas?

  Problem has been resolved by unistalling HD Audio drivers (installed on Windows 8.1 early HP).

  After the reboot, the drivers HD Audio was automatically installed and then updated via Windows Update.

  Video playback is now correct through no fault inside any software (IE, edge, WMP etc.).

• Audio, video, and game controllers missing in vista 64

  Hey there,

  I'm having a problem with my card mother dx58so and sound.  The speaker beside clock icon has a red X.  He says that there is no audio output device installed. When I go into Device Manager it isis is not even an option to extend a audio, video and game controllers. It is completely absent.  I've updated to a vista 64 SP2.  I also tried to install the drivers from microsoft, intel realtek and realtek themselves.  I called intel and had them go through everything with me also including enable/disable in the bios, updaste chipset, bios, drivers.  They also had me uninstall the driver that is at this time the audio, video and game controllers disappeared.  Any help would be great, otherwise I'll probabley try to reformatt HDD and reinstall windows.

  Hello zusa313,

  Thank you for using Microsoft Vista answers Forum!

  We would like to get a better understanding of this issue so that we can better help you on this question.

  Both your video and sound on Board (part of the motherboard) cards or are they another card installed in one of the slots on your system (stand-alone)

  Which version of the service Park you have on your PC (SP1 or SP2?)

  Have you checked to make sure that this motherboard is compatible with the operating system you are using? You can check it out here CENTER OF COMPATIBILITY of VISTA

  If your device is compatible, your problem may be getting the right driver or a defective unit, or you need to just run all the necessary update on your PC.  I suggest you run Windows update to get the latest updates for your PC.

  Second, boot your PC in a boot environment in MINIMAL MODE to make this issue is not caused by a background program and reinstall the latest drivers for your devices

  To perform a clean boot on a computer that is running Windows Vista, follow these steps.

  1. click on Start, type msconfig in the Search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the Load Startup items check box.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click disable all.

  5. click on OK.

  6. When you are prompted, click restart.

  7. after the computer starts, check if the problem is resolved.

  If your problem is resolved, follow the section How to determine what is causing the problem in the KB article to narrow down the exact source.

  http://support.microsoft.com/kb/331796. In addition, refer to the section on how to restore your computer to a Normal startup mode

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.

• Since I installed Win 7, my downloaded videos and their soundtracks are 'jerky' what to do?

  New installation of Windows 7, the new graphics card (current dll is best), always downloaded video and soundtracks are restless and unworthy.

  Hi Gary j. Smith

  I see that your downloaded videos and soundtracks are restless. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  3 is the issue limited to downloaded videos and sound tracks?

  4. what application you use to play these videos and soundtracks?

  5. are you able to play other videos and soundtracks with no problems?

  Please provide us with more information to continue troubleshooting as a result.

  See the link on how to ask questions or help on the Forums.

  Suggestions for a question on help forums: http://support.microsoft.com/kb/555375

  We can refer to this article and check.

  Getting started with Windows Media Player: http://windows.microsoft.com/en-US/windows7/Getting-started-with-Windows-Media-Player

  Thank you.

• Video and audio drivers for Satellite A100 - 756-PSAA9E

  I use XP SP3.

  The video and sound card on the site drivers do not work correctly - yellow mark in the Device Manager.

  Can someone tell me the exact drivers to use with this laptop model please?

  Hello

  All the drivers FRO Satellite A100 PSAA9E are ok and working properly!

  I see that you have installed SP3. This may be a reason why the drivers cannot be installed.

  Remove SP3, clean the OS using a free tool called CCleaner and try reinstalling the drivers!

  Check it out!

• Qosmio G10 graphics and sound driver installation

  Hello

  Recently, I tried to reinstall my Toshiba Qosmio G10 after you download all the latest drivers from the Toshiba site.

  Unfortunately I had my motherboard and the screen replaced in the last 3 years (under warranty), which means everything has changed since the original laptop, I bought (now a map graphic, NVIDIA GeForce go 6600, new chip set, etc., as far as I can remember).

  Someone at - it a system restore cd or a place I can download the appropriate drivers for this laptop.

  I am a sys admin and technical and spent about 5 hours, pulling on my hair, trying to get the drivers video and sound work.

  Hello!

  It is pretty easy to get drivers for a laptop of Toshiba.
  Looking on the Web from Toshiba site?

  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers
  Search for Qosmio G10, then you will find it.

  Good bye

• Windows Media Player enabled at startup interferes with sound, video and other sources

  Hi, this is a known issue since I've had this laptop second hand! But always thought that one of the USB flash drives was the cause (Sandisk Cruzer Micro U3), since the mouse cursor blinks like crazy until everything is fully charged and becomes stable. It is clear now Windows Media Player peut cause this conflict for two reasons. A single, "WMP" is pre-activated on startup? (as confirmed with the Task Manager, he just goes there and "sparkles" like crazy). And two, "WMP" wants to seize all media, he can find by default automatically; I "can I" accidentally put as such (during an update of Windows that you are prompted), not sure?

  A purchased late 2009 "Pinnacle PCTV Pro HDTV USB Stick" product had never worked right? Cause the software "TVCenterPro" was unstable, and TV shows have been troubled and often froze. OEM is finally released with a great release of TVCtr Pro5x ("TVCenter6"), and it works much better! But I could only install it in trial mode until I found the CD product key.

  I uninstalled and reinstalled TVC6; but no TV (or FM radio) channels can be found in the full activation mode? And better actually worked in "trial mode; which didn't make any sense? Pursuit of the investigation, that's when I discovered "WMP" behaviour above; and forced a complete process tree removal. I did the same thing to TVC6, which cound not 'see' peripheral integrated audio from the laptop in full mode? And on reloading the program, it worked! TVC6 can now detect the device audio and pick up channel and stations by their identifiers as he did in "test" mode There's more to refine what I should do to properly operate the TVCenter6. But I need to know why "WMP" havoc on audio, video and other sources, hardware and software!

  The 'specifications' are Internet Explorer 9 (new), Vista Home Basic SP-2 and Windows Media Player 11.0.6002.18311. The embedded video is ATI Radeon Express and the audio Realtek High definition, the processor is Intel Pentium Dual Core & so on.

  * The system doesn't have a virus etc and is up to date. Has anyone met a similar behavior with Windows Media Player?

  PS: I just start WMP(11x) again, and of course, the mouse cursor begins to blink like crazy immediately. The only solution is to make the highest (force the tree closed the process and prevent WMP launched with the use of the other audio video).

  It turned out that the real problem was much worse than I thought! I had to reinstall sound, video and other device drivers; Windows Management Framework Core for Vista x 86 [(bundle 32 bits: Windows Powershell 2.0, Windows Remote Management 2.0 ("WinRM"), Background Intelligent Transfer Service 4.0 ("BITS"))], etc.. And preparation tool system update to find and fix registry I didn't know were there? (42 total, only 4 keys were fixed. The other 38 were removed one by one, after finding a way to change the access permissions; not even administrator has for Vista Home Basic; for files also). Addition of a few executables of line at the command prompt (indicated in respective Microsoft etc. support messages and articles online); and what you said that I had already done all troubleshooting (failed?). After working on it for two days, the system suddenly broken to normal; and works better than ever. Windows Media Player (11 x) is working great now and is no longer remains in memory when opening and closing several times; hardware audio and video is surprisingly better; even the works of volume mixer! And that weird State "crazy cursor" that caused the blue screen error if allowed to go on long enough are gone! (even after the insertion of misc USB flash and other devices). Windows updates found nothing to "change" other than the periodic updates. I also ran the command line to stop several languages of the poll"(tout ce qu'il s'appelle?), and"Windows features"appears much faster than the overall speed and performance." All that's left is to tweak "Windows features" for optimum performance; Therefore, the problem is solved!

  Please note: I can't turn off the storage management removable and Remote Differential Compression etc to speed up Vista even more (not). TVCenter6 works fine but "hangs" in memory (at the end).

  For these questions, please go to the related post via this link: optional features of Windows cannot be enabled or disabled, hidden Windows updates cannot be uninstalled.

  Support: Please add a "Mark" button for the problems solved by the user (and when Microsoft does not provide the answer, as is the case with all other messages); so I can close the nets, I opened as 'resolved on mine'.

• TO THE DC71005/P4-520/40HNW / 512 G/4: VIDEO AND/OR SOUND CARD

  DC7100 SFF

  I'm LOOKING HERE at THE RECOMENDATIONS FOR a CARD VIDEO AND/OR SOUND above AND NOW FOUND CE WHO WAS RECOMMENDED IS OF PRODUCTION SO I WAS WONDERING if YOU HAVE ALL OTHER RECOMMENDATIONS. I'VE upgraded HARD drive OF 500 GB AND 4 GB RAM.

  I hope YOU CAN HELP. Its PROBLEMS AND OLD SYSTEM BUT NEVER had

  CRAIG

  Sorry for the late reply.

  Here are the links => >

  Sound

  https://app.box.com/s/jf2p7itfhfwi4a0ud9a9sesdaricab1c

  ==========================================================================================

  Graphics
  
  https://app.box.com/s/e9rnsh4rgsoqtoj9qqstykz6pt7vvwpg
  
  Thank you

• After the upgrade to Windows 8 on a HP Pavilion dv2799: sound, video, and mouse is stuttering

  My HP Pavilion dv2799 comes with Windows Vista and has always worked very well. However, after I have recently upgraded to Windows 8 32 bit, now sound, video and even the mouse is stuttering.

  The laptop has a NVIDIA GeForce 8400 M GS, and my approach has been to find the correct graphics driver. However, I don't find the driver on the HP website. I thought that maybe I need to use a HP change NVIDIA driver? To remedy this, I installed the latest NVIDIA driver, 314.22, from nvidia.com.

  Regarding the Conexant High Definition SmartAudio 221 sound that I can't find any other driver as 4.36.7.60. According to the website of Conexant, Conexant provides no drivers for PC audio products to end-users.

  It can be the cause of the performance issue? How can I solve the problem?

  OK, back to the other end of the scale.

  Try this one...

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=0&prodSeriesId=1847703&prodNameId=1847704&swEnvOID=2096&swLang=8&TaskID=135&swItem=ob-56504-1&mode=3

• I have synced clips successful but video and audio are not visible until it is developed to the timeline. Returned results completely black film without sound. Any tips?

  I have synced clips successful but video and audio are not visible until it is developed to the timeline. Returned results completely black film without sound. Any tips?

  Please give as much information as possible on your support. The video and audio works in QuickTime player? What are the specifications of media?