Similar Questions

• How to encrypt a USB, when I get the message "(GPT) GUID Partition Table partitioning scheme is required? '."

  I just tried to encrypt a USB drive with my Mac book (latest version) and got the message "A GUID Partition Table (GPT) partitioning schΘma required." What does this mean and suggestions on how to proceed?

  The drive must be formatted for Mac. Start in the Recvery mode. Erase the drive using disk utility (select the top icon which represents the entire disk and click clear. Partition scheme must be Mac OS (Extended) first partition GUID, which is the default value.

  If you want to install a system on it follow these steps:

  How to reinstall OS X on your Mac - Apple Support

• Qosmio x 500 - 14W - invalid partition table

  Hay guys,

  I wanted to start my Toshiba Quosmio x 500 - 14W PQX33E (Product Code), but the only thing I found on my desk: invalid partition table.

  In another Forum I found a threat, which means I have to restart my computer. So I tried a Reboot Cd, but found nothing. Then I tried to call the Call Center of Toshiba, but they are closed...

  For me, is the Toshiba Service miserably and I hope that some guys from the Forum can help me.

  Thank you
  Paul

  Hello

  You must install the operating system once more.
  Invalid partition table means that something is wrong with the HARD drive and the operating system cannot start.
  So if you n t have a recovery disk, you must order one:
  http://backupmedia.Toshiba.EU/landing.aspx

  PS: I made good experience with the Toshiba service comparing the service with another laptop from the manufacturer I have to say that s OK and I meet a lot of people who said that other manufacturers are not really better
  Which; s my opinion

• Satellite L630-00V - need to partition table

  Hello to you guys...

  So I really screwed up here, I did my girlfriend buy a laptop (Toshiba Satellite L630) and also a new hard drive to replace the one on the inside because they have slow (5400 RPM)

  I've used ghost to clone the drive inside the laptop to the new one I mounted in a housing that is connected via USB to the computer.

  Although I double checked everything and that the destination drive was the good the bad thing happened, the blank disc has been cloned on the full.

  I don't think that all my data are deleted, because there were at least 70 GB of commands on the computer (3 recovery partitions and Windows 7 one) and I doubt enough that it can all be erased within 5 seconds.

  I used GetBackData for NTFS witch scanned the hard drive for about 05:30 (Yes, 5 hours and a half) and well found a lot of files... If right now I copy all partitions said based on another hard drive...

  I'll have to do the scan a 2nd time to get Fat32 partitions...

  Something that would be useful for me is to have the partition table of a released factory Toshiba L630-00v (500 GB HDD) *.

  
  
  
  

  Beginning and end clusters would be really useful, I would be able to rebuild my much easier partition table

  
  And oh, no idea how to get the OEM Windows 7 cd to a new facility? They were paying for a copy of windows with their computer, their must be a way to install it...

  Thank you very much! ;)

  Hello

  > And oh, no idea how to get the OEM Windows 7 cd to a new facility? They were paying for a copy of windows with their computer, their must be a way to install it.

  Now, you can get money from Toshiba Recovery disk.

  For European models:

  https://backupmedia.Toshiba.EU/landing.aspx

  American models:

  https://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/serviceUnitVerification.jsp?orderType=SFF

  > my girlfriend did buy a laptop (Toshiba Satellite L630) and also a new hard drive to replace the one on the inside because they have slow (5400 RPM)

  What happens if put you the old hard drive to make a recovery disk and replace it with a new one, then... Then you will be able to restore the factory settings on the new hard drive with a recovery disk. Or you have not previously burned?

• after image restore, backup partition table is different

  Hello

  He is a 2012 Macbook mid Pro with El Capitan and Bootcamp.

  After repeated with Bootcamp (Windows 10 Pro) problems I started using Image of Terabyte for Linux in order to safeguard this Macbook. Forums terabyte that people know that the Image of Linux (such as Image for Windows) is able to create a reliable backup, but also to restore - restore an entire disk image or restoring individual partitions.

  I followed their instructions precisely and activated the two options "restore first Beach" and "TPG hidden OS" (as one terabyte official, Member of the forum wrote) when restoring a partition.

  Unfortunately, it did not work! Bootcamp was no longer visible in the start screen or wasn't visible, but not start.

  What I found was that I had to keep the two options (see above) with DISABILITIES.

  Then I could restore some partition images - and 10 Windows in Bootcamp is bootable.

  Well, it was the long introduction.  I'm sorry.

  Now my question is:

  Is this something that has changed my partition table?

  Before restoring an Image for backup of Linux for the first time, I had this partition table:

  localhost: ~ root # fdisk/dev/disk0

  Disk: geometry / dev/disk0: 60801/255/63 [976773168 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-409639]

  2: AF 1023 254 63 - 1023 254 63 [409640-857906448] HFS +.

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [858316088-1269536]

  * 04:07 1023 254 63-1023 254 63 [859586560-117186560] HPFS/QNX / TO THE

  BUT:

  After failed attempts to restore and work finally restore my partition table operation is different:

  Fdisk/dev/disk0

  Disk: geometry / dev/disk0: 60801/255/63 [976773168 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 0 0 2 - 1023 255 63 [1-409639]

  2: AF 25 102 15 - 1023 255 63 [409640-857906448] HFS +.

  3: AB 1023 0 57 - 1023 255 63 Boot Darwin [858316088-1269536]

  * 04:07 1023 199 8-1023 255 63 [859586560-117186560] HPFS/QNX / TO THE

  Everything seems to work fine, but I wonder if the different appearance of the partition table can be a problem?

  For example, compare:

  1: EA 1023 254 63 - 1023 254 63]

  3 o

  409639]

  TO

  1: EA 0 0 2 - 1023 255 [63 3 o 409639]

  It's the output of 'diskutil list ':

  localhost: ~ root # diskutil list

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 500,1 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Macintosh HD 439,2 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 60.0 GB disk0s4

  And the output of 'TPG - r - vv show/dev/disk0':

  See the TPG: / dev/disk0: mediasize = 500107862016; SectorSize = 512; blocks = 976773168

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 976773167

  start index size summary

  0 1 MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 857906448 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  858316088 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  859585624 936

  859586560 117186560 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  976773120 15

  976773135 32 table dry GPT

  976773167 1 dry GPT header

  Out of 'gdisk/dev/disk0:

  localhost: ~ root # gdisk/dev/disk0

  GPT fdisk (gdisk) version 1.0.1

  WARNING: Open with shared lock devices will not have their

  table partition automatically reloaded!

  Scanning partition table:

  MBR: hybrid

  BSD: absent

  APM: absent

  TPG: present

  Found a valid GPT with hybrid MBR; using GPT.

  Command (? for help): p

  Disk/dev/disk0: 976773168 sectors, GiB 465.8

  Logical sector size: 512 bytes

  Identifier (GUID) of disc: 38A2E667-6E00-4C0F-BD78-C95979E3CFAE

  Partition table contains up to 128 entries

  First usable sector is 34, last usable area is 976773134

  The partitions will be aligned with the boundaries of sector 8

  Space is free total 957 sectors (478,5 KiB)

  Starting number (sector) end (sector), Code name of size

  409639 40 1 MiB EF00 EFI 200.0

  2 409640 858316087 409.1 giB AF00 Macintosh HD

  3 858316088 859585623 619.9 MiB AB00 Recovery HD

  4 859586560 976773119 55.9 giB 0700 BOOTCAMP

  Any ideas?

  Another question:

  Is it possible to save the table to partition like that?

  DD if = / dev/sda of = gptandmbr bs = 512 count = 34

  Thank you very much

  NEUMAC

  In Fdisk, the CHS numbers are arbitrary on modern disks. They are the time of BIOS and old disks with CHS geometry. Puts BCA from Mac 0-1023 (1024 cylinders), 0-255 (256 heads) and 0-63 (64 sectors). Modern disks far exceed those numbers and would drain them. Must match what is the triplet of start/end/size and it fits in GPT and MBR. You can put arbitrary 0,0,0 for CHS and you will see all issues on GPT disks.

  Please do not use TBIL to restore W10 to circa 1970-80 disks.

• invalid partition table

  invalid partition table is displayed on my screen, pl help out me...

  Exactly what happened before you saw the error message?

• After reinstalling Windows on Linux invalid partition table

  I got an operating system linux on my pc, then I tried to install windows along the side with linux, so I put my windows cd in the drive and follow the steps, the first steps were well made, but when the pc restarts, it is a message (invalid partition table). p.s. I formatted the c partition and it did not work, so I deleted and made a new partition in unallocated space and there do not have too much work, help?
  Another PS it is no os can I enter on my pc.

  If you deleted all the partitions of the hard disk using Linux, then you should be able to put your Windows install disk, boot from it and install Windows.  The installation procedure needs to configure your hard drive correctly for Windows.

  -JW

• Partition table / no entry of safe mode

  HERE'S MY QUESTION:

  I'M TRYING TO RECOVER MY XP DESKTOP COMPUTER. WHENEVER I TRY not to enter MY "SAFE MODE" VIA THE XP CD I GET NO PASSAGE. NORMALLY I CAN GO THROUGH LOG BUT I'VE NOW DAMAGED A PARTITION. I USED THE HELP FILE (FIXMBR) HERE IS THE MESSAGE I HAVE,

  * THIS COMPUTER SEEMS TO HAVE A NON STANDARD OR INVALID MASTER BOOT RECORD *.

  FIXMBR may damage your partition tables if you continue (of course I did). This could cause all of your scores on the current hard disk to become inaccessible.

  If you have problems to access your drive, DO NOT CONTINUE (of course I did)

  Are you sure you want to write a new MBR?       (of course I checked yes)

  Then... If I'm screwed?   I have to buy a new hard drive?   I can solve this problem?  Can I use the old as a ghost player to get my files?

  HELP ME OB 1... YOUR MY ONLY HOPE THOMAS

  Hi Thomas,

  ·         Are able to connect in normal mode?

  ·         What happens when you try to connect in safe mode?

  ·         You get the error message?

  I suggest you to run the disk check to check for possible errors.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

• How to recover the partition table (corrupt) for the partition in good health?

  Partition (drive H) was working fine, then I rebooted my system normally and the drive is now inaccessible.

  "An error occurred reading the file: the file or directory is corrupted and unreadable." (1392).

  Window CMD CHKDSK says NTFS file system and "unable to determine the State and version volume.»

  [This is a disk external drive with 2 partitions on it - H and Mr. the second partition (drive M) discs works fine.]
  [Vista Ultimate OS]

  Is there a way I can get it to work or get the data off of it?

  Try the procedure described in the article below

  http://www.ehow.com/how_7500292_recover-bad-partition-table.html

• Invalid partition table appear on my HP a1700n

  Can a

  • System repair and recovery to be

  The partition table is the main hard disk index, indicating to the computer what stored where... what part of the hard disk contains the Windows operating system, which contains the files of restoration, which part contains utilities, and so forth.  If this table is damaged, the computer can not tell what is stored where.  To aid the recovery partition will not work because the computer is no longer able to see.  You would need a set of CD recovery or restoration of the manufacturer of the computer to restore it. Before you do, you must run a set of diagnostics of hard disk on the disk to make sure that this is going only to fail again.

• Partition table does not have a valid system partition

  I am working on a Dell XPS 420 computer for a customer.  She has Windows Vista installed on it (not sure what version of Vista).

  He's doing a loop, wherever it loads to the point where I can see the bottom and the mouse, but it stops there.  After 5 minutes of him sitting on this screen, it restarts, I can't access one of the Advanced menu F8.  I tried Safe Mode, and after that it loads the crcdisk it restarts, it does with Safe Mode, Mode safe mode with networking Mode and safe mode with command prompt.  I can't use the last known configuration because it will just try to load and eventually restart.

  Things I've tried is that I ran a diagnosis of hard drive and memory, and they both pass.

  I tried the repair with the regedit option and load the system hive in the registry.

  I tried the bootrec command.

  Well I put in a disk for Installation of Vista and choose the repair option.  I did the auto diagnosis and repair option (first choice I think) and I checked the report after he finished saying that it fixes itself and needed to restart (which he did not in fact)

  Well the result that came was that the Partition Table does not have a valid System Partition.

  I tried the bootrec command, and they all said it has repaired but it did not, when I tried to do the bootrec /rebuild he gave me the message "element not found".

  I ran a test diagnosis system and I received the following message

  System test
  error code 0146
  Msg error code 2000-0146
  MSG HDD 0 - self-test log contains previous errors. Given the code and can be used by the support message technology guide to help diagnose the problem.

  be honest, I just need to know if I need to replace the hard drive or not, it's for a customer.

  I did not see if the HDD is set to AHCI or SATA in the bios again, but I will when I get home today, but I would like some answers backup.

  Hi countryboyofal,

  I suggest that you contact Dell support for the outcome of the diagnostic system.

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=Gen&redirect=1

   

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Partition table is corrupted how to fix?

  Hello, I get this error after I turned off my computer (by the button) because it had frozen it had been frozen for 3 hours and I decided to hold it down for 5 seconds (stop the power) and I turned it back and it started. Is there a solution? I get the error message: "Partition table is corrupt on disk \Device\Harddisk0. Repair action: repair of partition result table: failure. Error code = 0 x 490 time: Mrs 160572

  Hello

  With the publication of the description, I understand that you are having problems to start your Windows 7 computer and gets also a errors of Partition table is corrupt on disk \Device\Harddisk0 code = 0 x 490. I will certainly help you get this fixed number.

  I suggest you refer to the suggestions by Stephanie Podder replied on 27 November 2011 in the below mentioned thread and check if this is useful:

  http://answers.Microsoft.com/en-us/Windows/Forum/all/partition-repair-startup-repair-failed-error-code/3af92d1a-e7ef-451D-9adc-3f7ffe8bb9c4?page=1

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• How to configure the partition table for SSD?

  Drive: 32 GB SSD

  I accidentally delete without backup partition table information and would like to know how to put the partition table, I can access the tools of partition table, but do not know how to define.

  Does anyone have any suggestions?

  Thanks in advance for your suggestions

  Hello

  Thanks for posting your query in Microsoft Community.

  The SSD could be seen in the disk management window, and you could name and set up as another hard drive internal. To create a partition or volume on a hard disk, you must be logged in as an administrator, and there must be unallocated disk space or free space in an extended hard disk partition. To repartition your hard drive, please consult the following link and check if it helps.

  I can I repartition my hard disk?

  Additional information:

  Create a new Partition on a hard disk in Windows 7

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Partition table error

  Windows 7 would not start; requested that I insert the DVD.  The problem solved window repair utility and gave the following details:

  "The Partition Table is not a valid system partition"

  "Repair action: partition table repair."

  "Result: completed error code = 0 x 0.

  This morning, I tried to start the computer, and the same thing happens again.

  What is going on?

  I had the same problem and more research and found this, followed and he helped her get up and going again

  http://social.technet.Microsoft.com/forums/en/itprovistaapps/thread/346b28ae-e3c0-42B6-A4AB-f06e30029e2e

• Cannot install Windows on this disk selected disk.the has a MBR partition table. On EFI systems, windows can be installed only on GPT disks.

  Cannot install Windows on this disk selected disk.the has a MBR partition table.

  On EFI systems, windows can be installed only on GPT disks.

  When I try to install WS2008R2 in my turn lenovo G580 i5-3210 as a dual-boot option.

  Hello Pratap ReddyBh,

  As you try to install Windows Server 2008 R2, it would be better for you to ask your question in the TechNet Windows Server forums.
  Click on the link here for TechNet.

  Thank you

  Marilyn

• Partitioning of an existing partitioned table

  Dear Experts,

  I have a problem with redefinition of partitioning of an existing partitioned table. I have a parent table separated by a virtual column by range:

  CREATE THE PARENT TABLE

  (

  PARENT_ID NUMBER NOT NULL,

  INSERT_TIMESTAMP TIMESTAMP (6) NOT NULL,

  CLOB PARENT_DATA NOT NULL,

  BATCH NUMBER,

  DATE of INSERT_DATE generated always as (TRUNC("INSERT_TIMESTAMP"))

  )

  LOB (PARENT_DATA) AS STORE NAVIGATION (ACTIVATE ONLINE STORAGE)

  PARTITION BY RANGE (INSERT_DATE)

  (

  P2015_11 PARTITION VALUES LESS THAN (TO_DATE (' 2015-12-01 00:00:00 ',' SYYYY-MM-DD HH24:MI:SS ',' NLS_CALENDAR = GREGORIAN '))

  CRAFT STORE (PARENT_DATA) AS (SECUREFILE

  ACTIVATE THE ONLINE STORAGE),

  P2015_12 PARTITION VALUES LESS THAN (TO_DATE (' 2016-01-01 00:00:00 ',' SYYYY-MM-DD HH24:MI:SS ',' NLS_CALENDAR = GREGORIAN '))

  CRAFT STORE (PARENT_DATA) AS (SECUREFILE

  ACTIVATE THE ONLINE STORAGE),

  P2016_01 PARTITION VALUES LESS THAN (TO_DATE (' 2016-02-01 00:00:00 ',' SYYYY-MM-DD HH24:MI:SS ',' NLS_CALENDAR = GREGORIAN '))

  CRAFT STORE (PARENT_DATA) AS (SECUREFILE

  ALLOW ONLINE STORAGE,

  PARTITION P_DEFAULT VALUES LESS THAN (MAXVALUE)

  CRAFT STORE (PARENT_DATA) AS (SECUREFILE

  ALLOW ONLINE STORAGE

  ))

  );

  and a child table partitioned by reference:

  CREATE ACCOUNTS FROM THE TABLE. CHILD

  (

  PARENT_ID NUMBER NOT NULL,

  DATAACC DATAACC_TBL,

  CREATION_DATE DATE,

  CONSTRAINT PARENT_D_E_PRT_FK

  FOREIGN KEY (PARENT_ID)

  (PARENT_ID) REFERENCES PARENT

  ENABLE VALIDATE

  )

  NESTED TABLE, STORE DATAACC AS DATAACC_NT

  PARTITION OF REFERENCE (PARENT_D_E_PRT_FK)

  (

  P2015_11 PARTITION,

  P2015_12 PARTITION,

  P2016_01 PARTITION,

  PARTITION P_DEFAULT);

  However, now in Oracle 12 c I am able to use the reference interval partitioning. How can I redefine the partitioning of the parent table so that there can be scope-level?

  Thank you for your help.

  Best regards, Atanas.

  To change range partition to partition interval, the table should not have MAXVALUE partition... Follow the steps below to convert to partition interval

  (1) check if all data of the MAXVALUE partition (p_default) using query below

  SELECT COUNT (*) FROM parent PARTITION (p_default).

  (2) if there is no trace in the p_default partition, drop the help below

  ALTER TABLE DROP PARTITION parent p_default;

  (3) use the clause SET INTERVAL to convert the range partition partition interval as below

  ALTER TABLE parent SET INTERVAL (NUMTOYMINTERVAL(1,'MONTH'));

  I guess, you have the range partition up to until, so there should not be any folder in p_default partition.