canon pixma ip4600 printer

Similar Questions

• Driver for Canon Pixma IP4600 printer

  I had to reinstall Windows on my PC due to obtaining a bad virus.  My Canon Pixma IP4600 printer worked before the re - install, but now windows can't find a driver.  I spoke to Canon and they said that they offer is no longer supported, but Windows should continue to support and drivers must come from there.  I tried a driver through Control Panel, but it is said that a driver is not available.  This printer is not that old, so I can't believe that there is no driver available to all.  Can you help me please?

  I'm sorry, but as I explained Microsoft does not write drivers for Canon products.

  Microsoft writes and provides drivers for their own products.

  All drivers that Microsoft may provide in their OS for Canon products provided by Canon.

  I suggest that contact you Canon and get them to set this output or first try the Vista drivers.

  Kind regards.

• Computer can not find scanner Canon pixma mg2550 printer

  Ive perchased today that precedes, but my computer won't find.

  installed and run the installation disc.

  no site ive found don't yet recognize this printer.

  my previous hp printer was not a problem.

  the only thing I mentioned, is the drive of dvd/cd said: 0 bytes to the left of 450?

  can someone help please...

  Moved from Community Participation

  Original title: canon pixma mg2550 printer scanner

  Contact Canon support through their website to see if they can help.

• Canon PIXMA MX922 printer will allow no 2-sided Word documents

  I just installed a new Canon PIXMA MX922 printer to replace an old MX882.  Everything works fine and I am able to print on both sides documents from web pages and e-mail by checking the 'duplex' box on the menu drop down print...  However, I am unable to both sides print all Word documents.  No check box 'two-sided' descend, and no "duplex" option is available, as it was with the MX882.  I never had this problem with the old MX882.  Can you help me?

  Thank you very much.

  Hi LonnieC,

  To set the option to print double-sided on a Mac, please open the printer driver:

  1. Select layout... in the file menu of the application.  The Layout dialog opens.

  2. Select print... in the file menu of the application.  The Print dialog box opens. In the print dialog box, you can set the paper type and print quality for printing.

• Canon Pixma iP1500 printer and it connect not gives an error code 20

  I have a canon Pixma iP1500 printer and it does not connect gives an error code 20?

  Hello

  1. If it works much earlier?

  2. did you make any changes before this problem?

  3. What is the exact message you received?

  I suggest to go through these steps and check.

  Method 1:

  This is due to the UAC. Disable UAC will help because UAC prompts the user the permission to continue, the time required to get the question and answer that cause the printer to turn it off.

  If you do not want to activate UAC you can call EnablePrinter when the capture of the EnablePre() event generated by the driver.

  Note: User Account Control (UAC) can help you to prevent your computer from unauthorized changes. It works by asking permission when a task requires administrative rights, such as installing software or changing settings affecting other users. We do not recommend disable user account control. If you turn it off, you must reactivate as soon as possible.

  Method 2:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 3:

  Uninstall the printer driver, download the latest driver on the manufacturer's website, install on your computer and check.

  Step 1: you can download the latest driver from the link below http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_ip_series/pixma_ip1500#DriversAndSoftware

  Step 2: Uninstall the device from Device Manager driver.

  a. right-click on the icon my computer

  b. Select manage from the menu.

  c. Select Device Manager in system tools that are listed in the resulting display.

  d. right-click on the device.

  e. click on the driver tab.

  f. click on uninstall.

  g. restart the computer

  Step 3: Installed the downloaded printer driver and check out them.

• HP Chromebook 14: I need to connect my Chromebook to my wireless Canon PIXMA MG3520 printer

  I have problems connecting my Chromebook to my wireless Canon PIXMA MG3520 printer. Because of the Chrome OS, it does not connect like Windows or Mac. I need help before their retirement, please.

  Hello Bama-85,

  You're right, the printers do not in the same way on Chrome OS install. I looked on the site of Google Cloud Print and your Canon printer is indeed supported. Follow this link to set up your printer ready for cloud.

  I have not setup a printer Canon via Google Cloud Print, but I guess it's as easy as setting up of HP printers on the print service.

• Windows 7 can not find .inf driver for Canon Pixma iP4000 printer connected to Windows XP.

  I have a laptop running Windows 7 (64-bit machine) I want to print from.  The laptop is on a home network wireless.  The office is wireless as well and is running Windows XP.  The Office has a Canon Pixma iP4000 printer connected with a parallel cable.  I installed the latest XP drivers for the printer on the desktop.  The laptop can connect directly to the printer with a USB cable and drivers will download automatically and it will print correctly.  However, I can't connect the printer using the wireless system.  I can go on the laptop to the home network and navigate to the printer and try to install.  It makes an automatic search and says that it cannot find the correct drivers.  I can browse to the file to install on my desktop, but it of an .exe file and not. INF.  I run the .exe file and it installs too, but Setup of printer on the laptop won't let me not by the .inf screen add to complete the installation of a wireless printer.

  Any suggestions?

  Very probably the XP driver name is different from the name of 64-bit driver.  Create a Local Port which copies the data to the print size in Windows 7.

  Here is an article knowledge base how to the names of the incompatible drivers.  Replace the Windows 7 machine for NT4 machine referenced in the article.

  http://support.Microsoft.com/kb/282842

  If you load the printer driver 32-bit on your 64-bit computer, you need the 32-bit driver for Windows 7.  You can do if you have a 32-bit computer of Windows 7 on the network to push pilots up to the machine that is sharing the printer.  None are flat files on the Windows 7 DVD, you need to install the OS or mount the ISO.

  The key to successful sharing between computers that run different printing architecture processors is pilot name.  PCL6 equal NOT PCL 6.

  Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• CANON PIXMA MG3250 PRINTER - seeing yellow (danger?) in the top left corner and the printer does not print

  Original title: Ms. Sue Somerville

  CANON PIXMA MG3250 PRINTER

  Yellow light (danger?) in the top left corner and the printer does not print. It was OK until I changed the inks.

  I lost instructions and can't download the manual though, like many others I tried for hours!

  I used little of this printer and just need to do simple, but urgent tasks.

  Are we supposed to it's bin and get another, then we can just get instructions and resume our work?

  I don't know about spacing in your message.  Heh

  This is a question for CANON - those who make and take over the device in question.  Everything you describe indicate that this is NOT a computer / software somehow problem and the problem would be the same if the device was not connected to any computer at all, an OS X one or a Linux one...

  These are the Microsoft forums.

  Here is the Canon forums:
  http://community.USA.Canon.com/T5/Canon-Forum/CT-p/Canon_Forum

  Here is a link to the manual for the device:

  http://www.Canon-Europe.com/support/consumer_products/products/fax__multifunctionals/inkjet/pixma_mg_series/pixma_mg3250.aspx?type=manuals&language=en#Disclaimer

  I suggest out of ink, check you removed all the "stickers" on the ink that * need * to be removed to work properly and make sure that the ink properly.  Print the pattern check nozzles and then to make sure that everything is installed properly:

  1. Make sure that the power is turned on.

  1. Load a sheet of A4 or letter paper format in the front tray.

  1. Open the output tray extension, open the paper output tray, and then extend the output paper support.

  1. Print the nozzle check pattern.

  (1) press on the button in Maintenance for poster has.

  

  (2) press the color or black.

  The ground of review of the nozzle will print.

  1. Review the rationale for control of the nozzle.

• Driver for windows 8 for canon pixma mp600 printer

  A driver is available for a canon pixma mp600 printer/scanner for windows 8?

  Canon Support and downloads would be if it is available for windows 8.

• Canon pixma ip4000 printer works only with Windows 8.1

  Separated from this thread.

  Hai, I have a Canon pixma ip4000 printer, it works fine with my desktop running windows 7, but it didn't with my laptop running windows 8.1

  I can't find any driver support to the Canon Web site.

  Is there any solution for this?

  Looking forward to hearing from you soon.

  Thank you

  Hello Chit,

  Thanks for posting your query on the Microsoft Community.

  I suggest trying to download the latest Windows 7 drivers from Canon Web site and then try to install in compatibility mode.

  Step 1: Download the drivers from the Canon Web site.

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_ip_series/pixma_ip4000#DriversAndSoftware

  Step 2: Installing the driver in compatibility mode.

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  You can also provide the following link to check the compatibility of the printer.

  http://www.Microsoft.com/en-us/Windows/compatibility/CompatCenter/home

  Follow the Microsoft articles as reference and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows-8/install-a-printer

  h ttp://windows.microsoft.com/en-US/windows-8/find-and-install-printer-drivers.

  It will be useful.

• Unable to connect w / Canon Pixma MX860 printer now I ElCapitan.  Need to print today... any suggestions?

  Just upgraded to El Capitan and now cannot connect with Canon PIxma 860 and not financially able to buy a new printer... no workaround solution suggested?  Canon has written is not compatible with El Capitan.  I have to get off at Yosemite?  Thank you.

  http://GIMP-print.sourceforge.NET/MacOSX.php

  This link should make your printer work again.

  That said, I've not heard of Captan El is not not compatible. But this fix should work.

• To use Canon pixma MG2900 printer wirelessly

  I bought this printer and I am able to use it via USB, but I would like to use wireless. It came with a CD, but my laptop doesn't have a dvd on the subject player. Except for the purchase of an external dvd drive, is there a site that has the content where I can download it?

  Thank you

  Kathy

  Moved from the community involvement Center

  Original title: Printer Canon pixma MG2900

  1. what version of Windows?

  2. If the software on the drive to set up a wireless connection to the printer,

  You should be able to download the same software of Canon

  http://www.USA.Canon.com/Cusa/support/consumer enter your printers

  the model name and search for drivers and downloads.

  Don

• Canon Pixma MP800 printing problem

  I use Windows XP Professional.  I have a Canon Pixma MP800, who has been a very reliable workhorse for many years.  Right now when I print a Word document using a black ink only, it is printing in the layers of alternative 1 cm of the impression of light and darkness which looks like that I chose to print alternatively in "BOLD" and normal print.  When I print the same Word document using colors, it prints very well.  I tried to do a nozzle check, cleaning, and a clean, none have worked in depth.  I also removed the print head and cleaned in a solution without success.  All ink cartridges are full of ink.  When I do a test print, the top of the marked test PGBK page, displays the first cm to cross the lines perfectly, but the second cm vertical lines of lines alternating with areas of verticle.  Printing from Excel has the same problem.

  Someone had this problem?

  Looks like you have tried all the usual suspects.  It's time to contact Canon support; It is not a Windows problem.

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mp_series/pixma_mp800#ServiceAndSupport

  Other possibilities:
  http://www.fixyourownprinter.com/
  http://www.nifty-stuff.com/forum/viewforum.php?ID=4

• Canon Pixma MG5320 printer does not print. Ink tanks are full, but the pages are blank. Help, please.

  I recently formatted my hard drive on my laptop and loaded a full version of Windows 7. (I had been running a version upgrade before formatting.) I downloaded the latest driver of printer on Canon website. My Canon Pixma MG5320 will not be printed. Ink tanks are full, but the pages are blank. This happens if I print from my laptop or my iPhone or IPad. What is the problem? Help, please.

  Hi marsha3236,

  To try to resolve the problem, you'll want to confirm that the inkjet nozzles are distribute the ink properly by printing a printer nozzle check pattern.  If the model does not print correctly, we recommend you to at least cleaning and deep cleanings on the printer to try to get the printing ink.  To print the nozzle check pattern and make cleaning, please follow the steps located here.

  If you are still experiencing difficulties after cleaning, please call or write us using one of the methods on the page contact us for further assistance.

• My CANON PIXMA MG3200 printer driver is corrupt!

  My printer Canon PIXMA 3200 seems to overlap when I try to print-copy! Some TECH of the CANON, at least that's what he said he was. Told me that my printer driver has been corrupted & I needed $ 199.99 for the Correct program pay! I don't have any money right now, trying to find a job with my printer creates more financial problems & I need a solution that is free! Anyone have any Suggestions? Please I need help!

  If this is a problem with the printer driver, you don't need to pay anything.

  You must uninstall the printer drivers and related software (commercial printer) first and then install the driver from http://usa.canon.com/cusa/consumer/products/printers_multifunction/photo_all_in_one_inkjet_printers/pixma_mg3220#DriversAndSoftware

  First uninstall, the Start button > type devices and printers > open devices and printers. Select your printer, right click and select remove device.

  Then go to programs and features in Control Panel and uninstall the printer utilities.

  Then download the drivers on link and install.

  If the problem is not resolved, you may need to contact Canon support. But in this case, it is not likely to be a driver problem, but rather a problem with the printer itself.