Similar Questions

• Satellite L630 - 16K - Chaning the size of the partition

  Hey guys, I hope someone will be able to help me with this. Recently bought a TOSHIBA Satellite L630 - 16K, running Windows 7, works very well. But I really don't like how the default partitions have been put in place.

  I basically want to extend the Windows partition (C :), which is 148,89 GB, in the amount of data (D :) which is the same size. This is where HDDRecovery files, so don't want to mess with it.

  The problem is, whenever I have the volume (D :) and a new volume of vacuum is created to the right of it, Windows (c) cannot be extended in this new volume, because it is on the far right, and from what I can tell you can only expand in a new volume if it is directly on the right.

  I created recovery DVD to my laptop as recommended by someone else, but I still hesitate to play on too with (d). I want to just large enough to hold the HDDRecovery files and then have all of (c) for everything else on my computer. Here's a screenshot of my set up disk management: http://oi54.tinypic.com/f4ml45.jpg.

  Thoughts?

  Hey,.

  As much as I know which extends from the Windows partition is not possible with the built-in Windows disk management tool. Therefore, you need another tool that allows you to change the Windows partition.

  I found a very similar thread where another user has successfully done this aid * tool GParted:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=62176

  Check this box!

• I need some advice for the Satellite L630/03

  Hi all

  I just bought my first Toshiba L630/037 (http://www.mytoshiba.com.au/products/notebooks/satellite/l630/psk04a-037001/specifications#details) and I'm really excited that I'm waiting to load for hours first 2 or if, after perform you a unboxing conversion it!
  He looks bloody awesome and I can't wait to start using it!

  You have a few questions:
  1. when I received it, the sticker that keeps the top down was already torn (as in a person already open).
  The clerk said that everything is fine with it, so we opened it to check that the main seal for the laptop has not been broken and that the adapter and cable was there. Now that I'm home and I have everything out, I noticed that I have no CD.
  Is that suppose to be right? I'm a bit confused because the last laptop that I bought a few of the installation CD and the drivers that came with it. In addition, is there something else I should be aware of that should have been in the box?
  All I have is the power cord, power adapter, manual, portable with battery already in it.

  2. in the purchase, there are already standard warranty 1 year that comes with the laptop. I noticed on the Toshiba site, you can buy an extended warranty. Should I buy now? Or can I get, say 1 week before the end of year 1?

  If anyone has useful tips or advice that would be greatly appreciated!

  See you soon!

  > I took everything out, I noticed that I have no CD.
  Yes, that's right. No CD is delivered pre-installed Toshiba Software is on the HARD drive and you can create a clean recovery disk! Please see the operating manual!

  > Should I buy now? Or can I get, say 1 week before the end of year 1?
  Well, as far as I know you don t need to buy the extended warranty immediately after the laptop was purchased

  I found this info:
  > Q: When can I buy the extended warranty?
  > A: the extended warranty is eligible to purchase, during the period of warranty the laptop
  http://www.MyToshiba.com.au/support/warranty/extended/FAQ

• TIMESTAMP (6) partitioned key-> range partitioned table ddl needed

  What is the DDL TIMESTAMP syntax (6) partitioned key, range partitioned table
  
  Published by: oracletune on January 11, 2013 10:26

  >
  What is the DDL TIMESTAMP syntax (6) partitioned key, range partitioned table
  >
  Don't know what you're asking. Are you asking how to create a table partitioned using a TIMESTAMP column (6) for the key?

  CREATE TABLE TEST1
  (
      USERID                 NUMBER,
      ENTRYCREATEDDATE     TIMESTAMP(6)
  )
  PARTITION BY RANGE (ENTRYCREATEDDATE) INTERVAL(NUMTOYMINTERVAL(1, 'MONTH'))
  (
      PARTITION P0 VALUES LESS THAN (TO_DATE('1-1-2013', 'DD-MM-YYYY'))
  )
  

  See my answer posted: January 10, 2013 21:56 if you need to do on a TIMESTAMP with TIME ZONE column. You must add a virtual column.
  Creating scores of auto range

• Desperately need help - "the partition table on device sda was unreadable." Erase all data?

  I'm forced to install CentOs on my Macbook using a machine virtual (VMWare, which is what I downloaded my teacher recommended). It's for my first class of operating systems, so bare with me because I don't know anything about operating systems (except about how to use Windows and my Macbook). I am also a daughter, what makes my same technical knowledge that much more rare. However, I am eager to learn...

  In any case, I downloaded them both. When I launch Fusion, I choose the file> New> install Windows or another OS on a virtual machine> continue without disk> click on the button that says 'Operating system installation disc using image file'> then I select the appropriate iso CentOS (CentOS - 5.4 - i386-bin-1of6) file> continue> drop down lists, I choose LINUX as operating system and Red Hat Enterprise Linux 5 as my Version> continue-> finish (no customization settings). It appears the screen of CentOS and I am invited by a text asking me if I want to install in text or graphics mode. (Don't know what to do here, but I select the graph). A bunch of white text scroll a screen of black background, then a blue screen shows up saying: 'Welcome to CentOS' at the top and a gray screen that says "to start testing CD media before installation OK press. Choose Ignore to ignore the media test and launch the installation. "I click on the red button (even once, if it is incorrect, let me know). A few rows of white text on black background (from anaconda... something on a video card...) then a nice graphic display of CentOS which I click NEXT. I then select English as my tongue (twice) and I gives me the message:

  "The partition table on device sda (VMware, VMware Virtual S 20473 MB) was unreadable. To create new partitions, it must be initialized, cauing the loss of all DATA on this drive. This operation will replace all choice on what players to ignore previous installation. You would like to initialize this drive, erasing all THE DATA? »

  I have no idea what to do here. I googled the message and others have been too, but they can talk about some hard file (and I have no idea what it is, and I can't seem to find mine).

  I can't lose what's on my hard drive (my school, music, photos, applications, files etc.). Clicking YES will erase my HD? I'm terribly afraid. I need to get this thing installed so I can do my operating systems class work, but I don't know if I did the installation correctly so far and especially, what to click at this point. Can someone help me out please (I spent 4 hours on this one today. "I have no one else to ask)? Finally, the installation is almost done after this step?

  Any help at all would be so greatly appreciated.

  I do not use Fusion, but I have VMware Workstation on Windows. I went through the same process that you went through. The answer to your question is that when you choose the operating system you install and you choose the option for the installation disc, it creates a virtual hard drive for you, size 20 GB. When they ask you to erase the hard drive, it's clear that virtual you create, not your actual computer hard drive. You can check by looking at the properties of the hard drive on your computer. It's probably 250 GB or 500 GB or something big like this. The CentOS WARNING speaks of a 20 GB hard drive, which is the size of the disk that VMware Fusion (and Workstation) create for CentOS.

• I need to change the column of the range on my partition table

  Hello
  
  I created a partition table, but I need to change column of the range "CREATED" to "PREPARED". Two of them date format, but I can't modify this table.
  
  PARTITION OF RANGE (CREATED)--> I need to change column "CREATED" as "PREPARED".
  (
  INV08 PARTITION VALUES LESS (TO_DATE('01-SEP-2010','DD-MON-YYYY')).
  INV09 PARTITION VALUES LESS (TO_DATE('01-OCT-2010','DD-MON-YYYY')).
  INV10 PARTITION VALUES LESS (TO_DATE('01-NOV-2010','DD-MON-YYYY')).
  PARTITION INV VALUES LESS THAN (MAXVALUE)
  )
  
  How can I do?
  
  Published by: user567352 on December 23, 2010 04:10

  Hello

  As far as I know, dbms_redefinition didn't even know about the partitioning:

  1. you create a new empty table that matches your need + (that is where you defined you new partition key) +.
  2. you start the names of submiting of redefinition of existing and newly created table 'interim' table
  3. you leave enough time to get the work done
  4. you have finished redefining (the name of the table are swapped)
  And voila!

  Be sure to test thorougly the process of redefinition and the performance impact that may occur until you make it to your production !
  ;-)

• Need info on webcam on Satellite L630

  Hello

  I'm buying one of the Toshiba Satellite L630 (ideally the 134 or 124), but there is conflicting info on the webcam...

  Some sites say they have a webcam of 1.3 and others say a camera 0.3? Any who own one of these and can tell me actually what they have?

  If I had to choose one with a camera of 0.3, the image is still ok? It really would be for Skype, but it s always annoying when the person you re talking to is a blurry mess!

  Thanks a lot for your help!

  Hello

  > some sites say that they have a webcam of 1.3 and others say a camera 0.3? any who own one of these and can tell me actually what they have?

  I hardly believe that Toshiba has 0.3 megapixels, even my old cell phone from 5 year 1.2 megapixel camera :). According to me, the camera is pretty good making photos.

• VMFS partition table corruption? Need help to retrieve data

  My House ESXi 5.1 was installed on HP Microserver G7. Hypervisor on USB-flash, datastore on Adaptec 3405.

  After some problems of power electro Microserver is will not start and I have chosen to build the new server on Microserver Gen8. I moved Adaptec and disks in the new box, installed new ESXi 5.5 U1 (HP image) on USB and after reboot did not store data :-(.

  After some research, I found that ESXi is not see any partition table on this raid array:

  
  

  partedUtil getptbl /vmfs/devices/disks/mpx.vmhba2:C0:T0:L0

  unknown

  728422 255 63 11702108160

  BUT! I tried to start the server of linux liveCD with vmfs-tools 0.2.5 installed partition mounted with vmfs-fuse and able to see the data! But cannot copy all important vmdk (see below).

  debugvmfs is also show me some useful information:

  Volume Version: 14

  Version: 54

  Label: STORE

  Mode: public

  UUID: 4f2ac538-58c181cf-arms-441ea13ee615

  Creation date: 2012-02-02 23:17:44

  Block size: 1 MiB

  Subblock size: 8 KiB

  Size of header of the FDC: 64 KiB

  County of FDC Bitmap: 64

  and it's very strange

  debugvmfs/dev/sda1 see the lvm.extent [0]

  Device: / dev/sda1

  UUID: 4f2ac4da-8de4b166-a-441ea13ee615 848

  LUN: 0

  Version: 5

  Name:

  Size: 459.99 GiB

  NUM. Segments: 22319

  First Segment: 0

  Last Segment: 22318

  
  

  because I don't know that I don't create scopes.

  
  

  Also, there are two vmdk files on more than 256 GB data store and it cannot copy because of the limitation of vmdk-tools :-(.

  
  

  I tried to do a magic (like this - partedUtil setptbl "/ vmfs/devices/disks/mpx.vmhba2:C0:T0:L0" GPT "1 2048 11702099429 AA31E02A400F11DB9590000C2911D1B8 0""), but without success;-(.)

  
  

  All the suggestions, guys?
  

  Finally!

  Found that was an "Intel VT - d" enabled in the BIOS. After disable it everything is cool.

  It looks like Adaptec 3405 working wrong with it. Will try to change it to P222.

• need to unpack a hash partitioned table

  I'm working on the database oracle 11.1.0.7 on solaris.
  
  We had problems loading data in compressed tables, so we try to unpack tables and their partitions.
  When I tried to unpacking of a hash partitioned table, I get this error
  
  SQL > alter table move partition SYS_1 sample nocompress;
  ALTER table move partition SYS_1 nocompress sample
  *
  ERROR on line 1:
  ORA-14260: incorrect physical attribute specified for this partition
  
  I am able to move the table, it's just the nocompress option is not working.
  
  SQL > alter table example moving partition SYS_1.
  
  Modified table.
  
  Can't unpack us a hash partitioned table that is compressed?

  You must do this in two steps

  alter table sample modify partition SYS_1 nocompress;
  alter table sample move partition SYS_1;
  

  Best regards

  Maxim

• Satellite U940 - 11b - need help with recovery files

  Madam/Sir,

  I have a question about a failure U940 - 11 c.

  The laptop crashed after be closed during recovery of windows procedures. I think that Windows is damaged, as a result, the laptop no longer starts. When turing the laptop on the following message is displayed: reboot and select proper boot device. See the image below:

  Files on the hard drive are very precious to me, so the hard drive can not be reset until I got the files. I tried to recover the boot files Ubuntu from a USB flash drive. Ubuntu began without any difficulty. The problem is that Ubuntu is not able to find the Windows hard disk. From Gparted, the following errors occurred:

  1. WARNING: / dev/sda contains the signatures of TPG, indicating that she has a GPT table. However, it doesn't have a valid fake msdos partition table, as it should. Maybe it has been altered - possibly by a program that does not include the GPT partition tables. Or maybe you deleted the table GPT and are now using a msdos partition table. It is a GPT partition table? :

  2. the GPT backup table is not at the end of the disc, as it should. This may mean another operating system to think that the drive is smaller. FIS, by moving the backup at the end (and revmoving the old backup)? :

  3. not all the space available to/dev/sdb appears to be used, van correct you the GPT to use all the space (special edition 39007920 blocks) or continue with the current configuration? :

  4. the disk is allocated:

  Do you have tips or advice that could help me get the files from the hard drive. I do not understand the errors and will not be able to solve this problem. Thanks in advance.

  Hello

  I suggest that you use the tool to disks in Ubuntu to mount your Windows partition.
  If the partition is damaged in an aborted recovery (or other reason), you will need to invest a lot of time and effort to successfully recover your data.

  Tom BR

• Satellite L630 dead after BIOS update

  Hello

  I have a problem with a Toshiba Satellite L630 laptop model PSK00E-017019EN (British model).

  An analysis of software Toshiba recommends an update of the BIOS and that I had a few problems with the laptop, I decided to let it run... big mistake!

  The laptop will now not enter bios is effectively dead.

  I downloaded different versions of the crisis Phoenix Recovery Disk (that will build a bootable USB key with MINIDOS. SYS, PHLASH16. EXE and a generic BIOS. WPH) and have also downloaded the latest version of the BIOS on the toshiba site.

  The downloaded BIOS Toshiba is an exe SL630_L635_WIN_B140.exe file that will extract the following files using WINRAR (I tried also pick up the files in %Temp%, after you run the exe with the same result).

  The files that I get are:

  BB10140. FD (4170kb)

  Ding.wav (104 KB)

  InsydeFlash.exe (764 KB)

  iscflash.dll (1760 KB)

  iscflash.sys (14 KB)

  iscflashx64.sys (23 KB)

  and platform.ini (9kb)

  I expect to see the real bios in the form xxxx.rom or xxxx. WPH so that I could add this to the bootable flash drive to reflash the bios.

  So my real question, can someone direct me to where I can download the correct BIOS. ROM file for this laptop and also where I can get the right version of the software Phoenix crisis Recovery Disk.

  Also could you confirm the correct key sequence to start on crisis Recovery flash drive... I've seen talk of the F and B FN FN (both used without battery and plugging in the adapter, then power button / stop)... the FN routine F seems to start the Flash Player, but obviously without the right file WPH will not solve the problem.

  Thank you

  Phil

  To be honest, I don t think that BIOS ROM module needs to be replaced.
  In my opinion the ROM module must be flashed again using a special disc of crisis of the BIOS.
  I recommend you contact Toshiba service and pay a small fee for the flash ROM module.
  It is much better solution to handle the motherboard.

• Change of card wireless in the Satellite L630

  Hello

  I recently bought a Satellite L630, which has a Realtek 8172 (or possibly a 8191SE;) I can't say the PCI ID) wireless chipset.
  I installed a 64 bit version of Linux on it and there seems to be a total lack of support of the drivers for the wireless card.
  The Realtek driver only a binary blob and blocks my entire system when I try to load it.

  I have a card Intel 4965AGN Minipci wireless lying around that I know works very well under Linux, and I want to spend this card wireless with the Realtek card if possible. First of all, I need a few questions answered:

  1. the Satellite L630 use a miniPCI wireless card slot?
  2. about the motherboard location wireless card? (I can't find all the L630 anywhere internal diagrams)
  3. If I do this, it void my warranty?

  Thanks for your help!
  Nick

  > 1. The Satellite L630 use a miniPCI wireless card slot?
  Yes, the L630 and other new age Toshiba laptops support slot for WLan miniPCI card.

  > 2. About where on the motherboard the wireless card is it located? (I can't find all the L630 anywhere internal diagrams)
  I think the Bay of WLan is placed at the bottom of the unit.
  To my knowledge it s secured with a screw.

  > 3. If I do this, it void my warranty?
  Yes, I think so.

• 7 days old Satellite L630 - 16L crashes without reason

  Hi all

  First post!, my new Core I3 Satellite L630 - 16L (win 7 home prem 64-bit) seems to be freezing at least once a day (it seems to be only after that he was awakened fashion 'sleep' - after having closed the lid) he works when awake for about 10-15 minutes then everything freezes and have to shut down and restart?

  All the drivers are current and only toshiba newsletter I find near this lock upward / gel error refers to a driver problem for a fingerprint reader - who doesn't have this model!

  Any ideas? I have not really loaded well could try a system restore, but I don't think its related software!

  Will disable the "sleep mode" for now to see if I still have the problem tomorrow. (seems to be once a day, usually just at the moment where the navigation - not doing anything whatsoever in the background and not on a particular site, just move the mouse, it locks! I need to then press the power button / stop for 3 seconds - weird!)

  Thanks in advance
  Stephen

  Hey Buddy,

  > Will disable the "sleep mode" for now to see if I still have the problem tomorrow.
  And what's happening now? Do you have any news about this?

  If it doesn t work I would still try a recovery facility disk recovery and HARD drive recovery system. It s worth a try because this problem might be software related

  One more thing: do you have installed the latest version of the BIOS?

• After reinstalling Windows on Linux invalid partition table

  I got an operating system linux on my pc, then I tried to install windows along the side with linux, so I put my windows cd in the drive and follow the steps, the first steps were well made, but when the pc restarts, it is a message (invalid partition table). p.s. I formatted the c partition and it did not work, so I deleted and made a new partition in unallocated space and there do not have too much work, help?
  Another PS it is no os can I enter on my pc.

  If you deleted all the partitions of the hard disk using Linux, then you should be able to put your Windows install disk, boot from it and install Windows.  The installation procedure needs to configure your hard drive correctly for Windows.

  -JW

• Invalid partition table appear on my HP a1700n

  Can a

  • System repair and recovery to be

  The partition table is the main hard disk index, indicating to the computer what stored where... what part of the hard disk contains the Windows operating system, which contains the files of restoration, which part contains utilities, and so forth.  If this table is damaged, the computer can not tell what is stored where.  To aid the recovery partition will not work because the computer is no longer able to see.  You would need a set of CD recovery or restoration of the manufacturer of the computer to restore it. Before you do, you must run a set of diagnostics of hard disk on the disk to make sure that this is going only to fail again.