Partitioning of a seconed disc, which has no unallocted of sections?

Similar Questions

• If I decrease my first partition where I installed my windows 7 which has 100 GB of space available go I lose all the files of the OS or data?

  Hello

  If I decrease my first partition on which I have installed windows 7, which has 100 GB of available space, will I in bulk all the files of the OS or data on my first partition?

  Thank you

  Johan

  Johan,

  Before you begin this task, assume that you will lose everything.

  Make a system image - see link on the left side of the opening screen of Windows backup.

  Make a disc repair system [this can also be done starting from a link on the opening screen of the Windows backup] or a Windows 7 installation disc to use to restore this image if necessary.  Then test that you can boot from it before starting the main task.

  I resized a partition with no problems successfully, but there is a risk of serious or even catastrophic problems.

  Good luck

• How do I take a VISTA system which has a drive with a C and D partition and combne in C only a partition with the storage of which was C and D?

  How do I take a VISTA system which has a drive with a C and D partition and combne in C only a partition with the storage of which was C and D?

  Hello

  Make sure that D: is not the partition recovery including the manufacturer put there to make the recovery disks from and eventually to return your computer to how you bought

  You cannot combine C: and D: and their data using the Vista Disk Manager

  with Vista, you will need to save the data on D: - D: delete - and then extend C: into the now unallocated space where D: was to do a 1 partition 2

  read the tutorial below

  How to remove and extend a Partition with Vista disk management

  http://www.Vistax64.com/tutorials/95418-disk-management-delete-extend.html

• Wizard BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  How is it assistant BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  This has two questions:

  1 capacity of SSDS faster for Fusion drive has been reduced. Therefore less effective for the reader of the merger. For example if I need to create a partition of 80G for my windows bootcamp partition, only 48 G will be left in the drive of the merger.

  2. ability of the bootcamp windows partition becomes very limited, cannot be greater than 120 G.

  3. even when I try to fuse out of the drive of fusion in the 128 G SSD and 3 TB of HARD disk, and then run the BootCamp assistant to create the bootcamp partition start from scratch to reinstall El Capitan only on the HARD drive (without drive Fusion), it won't let me do anything, it just shows an error that says something like "a person has created additional partitions on this drive please select. another disc. But there is nothing else to choose.

  Before my (5 K, 27 inches, end of 2014 retina) to El Capitan Yosemite, I was able to use the previous version of the wizard BootCamp 5.x to create the partition, bootcamp on the drive of the merger. And it will be divided in the fuser unit in two and insert the Bootcamp partition (with the size I chose, which can go up to 1 TB) between two partitions of MAC OSX.

  The disk partitions resulting from it, will be the partition MAC OS x on the SSD, the partition MAC OS x on the HARD drive partition #1, partition MAC OS x on the HARD drive partition #3.

  Then there is the BootCamp partition on the HARD drive partition #2.

  Is there a way to get what I need?

  That is what has been described in this notice of two canoes?

  Installation of Windows on a Boot Camp partition on a drive of TB Fusion 3

  n-on-a-3-TB-fusion-drive http://twocanoes.com/Winclone/support/installing-Windows-on-a-Boot-Camp-partitio

  Thank you.

  After having worked on those weeks, I realized that I need very painfully (by first going back to Yosemite and bootcamp 5 to escape all the limitations of El Capitan and BootCamp 6) I want to share here. Someone at - it other smarter solutions welcome.

  Note these steps and mentioned drivers only work for my version of iMAC, retina 5K late 2014. If you have other material, please search on the web to see which driver will work first. And all of these steps are destructive and assumed that you first take backup. It is only shared for interest only. Readers will have to bear your own risk.

  A. take backup

  1. take a backup completes my iMac Fusion Drive using Time Machine. Then restart with a Yosemite USB installation and select Terminal from the menu on the top bar.

  B. fuse out of the merger in two physical disks drive: SSD + HDD

  1. in the terminal, type the commands in show what the logical volume group ID and the ID of the logical Volume of the disc fusion)

  Cs diskutil list

  2. in the terminal, type commands for the fuse of the fuser unit and separate them to an SSD and a HARD drive.  Note: All data will be destroyed in the drive of the merger. There are many articles in this community on how this could be done,

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  This should finish within 30 minutes. If you have taken more time, this means that your reader of fusion has been altered somehow.

  I hit this issue too.  To use this command to remove the fusion drive hung up, and I need to do the hard to scramble a few sections of data in the hard disk partition table using the controls to tell the OSX this hard drive is a new without partitions:

  Cat >/dev/random /dev/disk0 (where/dev/disk0 is the SSD)

  and repeat for disk1/dev/disk1 which is the HARD drive in my case).

  This command will not return anything, but expect to press Ctrl-Z to end after 1 minute.

  2 create independent partitions (non-fusionend) for the installation of OSX.

  Borne Terminal output, and select disk utility, in disk utility, select the drive to HARD disk (and not on the partition), you will see the error message and you will be asked if you want to fix the fuser unit, click on ignore. Then wipe the HARD drive to create a single 'extended OSX journaled"named"HARD drive".

  3. Repeat step 2, and then erase the SSD drive to create a single 'extended OSX journaled"named"SSD ".

  C. install on the HARD disk as drive didier autonomous not fusion.

  1. go to Yosemite install screen and proceed with the installation of a clean copy of Yosemite to the iMAC. then connect you.

  D. use BootCamp Yosemite f5 to install windows.

  1. launch Yosemite bootcamp.

  2. check the two checkboxes for creating the USB drive to install windows 7 or a later version, and to download the windows supports the Apple software.  Do not click on the last box to install or remove windows pie creating real bootcamp partition again.

  3. it may take several hours to complete this function of your internet b/w and also performance of your USB drive.

  4. If you install Windows 7 (like me), then the downloaded drivers will not work for you, this will cause the issue of the device driver appleDSS.sys does not like this driver and others are too recent for windows 7 to use.  Also, your keyboard and mouse may not work even if you try to plug in a USB external keyboard or a mouse. You need to replace the drivers downloaded by others (the Boot Camp 5.1.5769 drivers that I find in this link: Software Support of Boot Camp 5.1.5769.) (Note: this driver is material specific only works for my iMAC model).  Once you have downloaded it, copy the two files in the root directory of the USB installation to replace the original ones. It's specific and material available for download somewhere on the Apple Site.

  -From the Finder, delete the $WinPE$ and the Boot Camp of the FLASH PLAYER files.

  -Expand the old drivers for Boot Camp 5.1.5769 (two records and another file) on your desktop.

  -Copy the $WinPE$ and records of Boot Camp in the FLASH PLAYER.

  5. open Boot Camp Assistant again and only select the third option, install Windows 7.

  It will show you the screen to select what installation disk, select HARD drive.

  Then drag the slide bar to select the size of the Bootcamp partition for windows you want, knowing that there is a restriction for windows installed using training camp on a MAC that the last byte of the BootCamp partition must reside in the first byte of the 2.2 T of each physical hard drive.

  For my case, I need only 500G for bootcamp and leaving behind 1.7 to for my MAC OSX partition immediately after the bootcamp partition and an another 0.8 T MAC OSX partition after him. 1.7 TB and the partition of MAC OS x 0.8 TB well exploited in the meantime bootcamp partition, will be merged into a fusion drive by Bootcamp. Thus, you will end up with total 2.5 TB of disk space in a logical drive - fuser.

  Go to this link for more details on this subject: n-on-a-3-tb-fusion-drive http://twocanoes.com/winclone/support/installing-windows-on-a-boot-camp-partitio

  6. continue the process to partition the hard drive, then it will restart automatically in windows installation mode, install windows.

  7. once the installation is complete, check that windows is functioning correctly.

  E. Si you want to upgrade to windows 10 Windows 7.

  1 if you plan to upgrade to windows 10, you'll find that the windows IE v.8 7 is no longer works and had many problems to load the page.  Then when you try to download the latest version of Internet Explorer, you get an error that you need at least windows 7 SP1 to support the last IE.  Life is too complicated, just download the google Chrome browser, then search for download windows 10 and then run the Microsoft valuation tool to upgrade.

  2 but before upgrade you, unplug all your MAC USB drives, otherwise, you will find that, after having spent an hour downloading the windows 10 software, the upgrade will fail with the error "/ dynamicupdate...» ». It is an inexplicable mistake that no one seems to understand why. There are articles with proven results that the removal of all USB drives before running the windows 10 upgrade tool will correct this problem.

  F. reinstall OSX El Capitan

  Once your target windows system (if windows 7, windows 8 or windows 10) works very well.  You can continue to create again your Fusion drive and reinstall OSX El Capitan.

  1. Insert the install of OSX Yosemite rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type the command 'diskutil list cs' and you should see nothing to prove that there are no existing fusion drive yet.

  6 type the 'diskutil list' command to list all disks and partitions.

  The SSD has two partitions, the/dev/disk0s1 of EFI (209 MB) partition and the other/dev/disk0s2 of OSX partition we created in step B above, called SSD around 121 G.

  The HARD drive has two partitions, the/dev/disk1s1 of EFI (209 MB) partition and the other/dev/disk1s2 of OSX partition we created in step B above, called SSD.

  G. delete the logical storage of nucleus on the HARD disk drive and it refuses with the DSS to form a merger with faster performance disc

  1. Insert the install of OSX El Capitan rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type orders for (to show what are the logical volume group ID and the ID of the logical Volume of the logical drive). You should see the logical volume to basic storage group created using two partitions on the hard drive, 1.7 TB and TB 0.8 created when we run the Yosemite Bootcamp to install windows.

  Cs diskutil list

  6. in the terminal, type commands to delete logical drives from basic storage.  Note: All data will be destroyed in the logical drive.

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  7. tap "diskutil list" command lists all the resulting partitions. You should see that the HARD drive has the following partitions.

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS GB SSD 121.0 disk0s2

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_HFS 1.7 Untitled TB disk1s2

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 503.0 GB disk1s4

  5: Apple_HFS 801,4 Untitled GB disk1s5

  8 type the following commands to create the logical volumes group, named "myLVG" (or the name) of fuser using the usable for OSX to the SSD and HDD partitions.

  diskutil cs to create "myLVG" disk0s2 disk1s2 disk1s5

  Note: Mark the group id of logical volume shown in the results.

  In my case, I want to book the last partition as standalone partition disk1s5 no-fusionend, so I can use it to raise the back, or format it in FAT32 to allow the exchange of data between the MAC and boot camp.

  So, I do not understand this last partition in the drive of the merger. in my case, the command that I used is: diskutil cs to create "myLVG" disk0s2 disk1s2

  9 create logical volumes named "Macintosh HD" (or you call it) on the logical volume group we just created for the reader of the merger.

  diskutil createvolume logical volume group ID jhfs cs + 'Macintosh HD' 100%

  10 command "diskutil cs type list" to check the resulting fusion drive created.

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group F53C7A25-C2F3-4997-91E9-2E6B6BAB2E0E

  =========================================================

  Name: LVG

  Status: online

  Dimensions: 1815635525632 B (1.8 to)

  Free space: 90112 B (90.1 KB)

  |

  +-Physical volume E176873C-7C80-4759-8110-BA7307E0C4B3

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120988852224 B (121.0 GB)

  |

  +-Physical volume 6535AC3C-DCF8-453F-AD47-98905538386E

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk1s2

  |   Status: online

  |   Dimensions: 1694646673408 B (1.7 to)

  |

  +--> Logical volume family F3D15F87-FB84-4B43-B2F2-E9EACC7C42D9

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical volume 0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

  ---------------------------------------------------

  Disc: disk2

  Status: online

  Size (Total): 1809780178944 B (1.8 to)

  Reversible: no

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  LVG Type: Fusion, sparse

  11 exit the terminal, go back to OSX El Capitan install screen and select the name of the fuser unit 'Macintosh HD' proceed to begin the installation of the os x for installation.

  12. There will be a step in the installation ask you if you want to configure as a new computer, or restore from a time machine previous backup. Make your own choices it accordingly.

  13 once OSX El Capitan has been installed and you have finished restoring the data and custom configurations, you can enter the application of preferences to check if you see the icon of the "Startup" disk", and if you choose Startup BootCamp in the next reboot, you should be able to boot up to Windows without pressing and holding the button option when reboot and choose to start windows manually. Also, in windows, you should be able to click on the bootcamp Control Panel and select for a startup to OSX on the next reboot.

  14. one thing to be aware, if you install bootcamp in this way, the boot camp and the GUI utility disk in OSX El Capitan will not be able to adjust your settings. This means, if you need to touch anything or to readjust the size of the partition, you will need to do it again in step A. Alternatively, some how to get started with installing Mac OSX Yosemite USB, then adjust the partitions using similar commands shown in this article or other articles in this community.

  15. yet once please take personal responsibility on damage if you follow the instructions in this article.

• CAN I just copy an optical disc which will not rise?

  I have a Mac Pro 1.1 with 2 optical drives in it.  I have an 8 year, DVD-R (DVD video playable) who will not rise in the optical drive - Mac said that it is in a format, it does not acknowledge.  Put in a DVD player just says "cannot read disc".

  Is it possible that I can copy bit to try various recovery tools to extract the content?  I hope it's just the header of the disc which is corrupted, if I can little copy it there ' has a good chance I can retrieve the content as it was all linear written only once.

  Thank you.

  1 insert a disc to work in one of your disks

  2. open Terminal and type "mount", press the ENTER key

  3. find the drive in the list of mounted volumes and remember / note the name of the drive, / dev/disk4s0 i.g.

  4. replace the drive working with the broken

  5. type "dd bs = 2048 if of=./Desktop/image.iso = / dev/disk4s0" and press the ENTER key

  Replace "disk4s0" by the number of correct drive.

  If you get a "permission denied" try "sudo dd bs =...". ». Enter your user password when asked.

• window: disc importer has stopped working

  I have a problem with my new Sony Vaio. There is a window with the message "disc importer has stopped working ' which is displayed all the time. I can't install my microsoft office 2010, I can't save my word (in my starter of Word) documents, etc.

  My computer has only two weeks, what should I do?

  Thank you.

   

  Hi mafepanizo,

  1. You receive the wile of Microsoft office 2010 installation error message?
  2. Did you the latest changes on the computer?
  3. What happens when you try to install Microsoft office 2010?

  I suggest you to check if you receive the error message in the clean boot procedure.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  For any Microsoft desktop applications, please report your query in the forums of Microsoft Office.

  http://social.answers.Microsoft.com/forums/en-us/OfficeInstall/threads

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• 64 bit sytem with vista home premium which has been randomly locking up and freezing. The error is event 6008.

  I have an ACER aspire x 3200 64 bit sytem with vista home premium which has been randomly locking up and freezing. The only mistakes were event 6008 with a description of the stop system prior to (time) on (date) was not planned.
  When these errors originally occurred, I returned the system to acer and they installed a new hard drive. After updating the vista system blockages continue 30 times over a period of 3 months. Acer sent me a new disk image on 3 disks that I have installed and updated on 11 October. There is no blocking until the 10/27, 10/28, and for the 3rd time today.
  The closed unexpected gives a blue screen if I use the locking system to the top. I have to hold the power to restart when the system crashes.
  Can someone help me solve this problem?

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.  But I guess it's too late for this for so long that there are probably no so old restore points.

  If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, try to start in safe mode (repeatedly hit F8 key so that the start and go in safe mode with networking).  Then we will check some of your system files:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.

  If this does not work, then please post repetitive errors in Event Viewer on the stop (Start / Control Panel / administrative tools / Event Viewer).  Here's how to use Event Viewer: http://www.bleepingcomputer.com/forums/topic40108.html.  From what I understand, there is none of the events (which surprises me because a freeze should certainly generate an error event).

  If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. If other procedures do not work, it is almost certain to work (but you NEED a disc).  You can have a lot of updates to re - install (including all you need to remove service packs).  If the version on system with SP1 or SP2 preinstalled cane and the disc is an earlier version, then you will need to do a slipstream drive as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html.

  I hope one of these procedures can solve your problem.  If this isn't the case, after return and we will try something else.  Return message anyway so we know how it turns out.

  Good luck!

  Lorien - a - MCSE/MCSA/network + / A +.

• doesn't have a HDD with Win7 OEM, which has been improved to win 10 - No Media - how to install the new SSD?

  Hi members of the community.

  One of my colleagues brought me his personal computer to the difficulty.  It's a phone of 2011 which has Win 7 pre installed on it (OEM with a recovery partition).  It has no support for the version of Win 7 and she never bothered with the creation of recovery media or to order the installation media, but since its purchase, it has upgraded to Win 8, then 8.1 and finally Win10.

  Problem, it is the disk HARD watch of major equipment failures and every time you start more errors appear that problems are cascade.  There is a recovery on the HARD drive partition, but windows has trouble starting, I fear that this recovery partition is useless, because we don't want the windows reinstalled on this faulty drive.

  Can any advise if there is a way to install a windows OS on windows versions, that it has improved or the original win7 OEM supplied with the laptop without the media and with a damaged HARD drive?

  The hard drive that is damaged is a 750 GB drive at 5400 RPM samsung - she bought a new 980 GB SSD sata III.  I have already confirmed the laptop can use Sata III - I have a true picture and was curious to know if I can clone the recovery partition (if its still viable) can I do it on the SSD and then force the recovery on the SSD drive?  or that violate the license for OEM?

  Any advice would be appreciated, because I'm used to using volume licenses and I am new to OEM preinstalled OS damaged.

  Thank you very much

  ENO.

  Because the system is currently registered and activated with 10 Windows, just download the Windows 10 edition which currently installed, and then perform a new installation.

  How to download official Windows 10 ISO files

  then

  How to: perform a clean installation of Windows 10

  If you are prompted to enter a key click, product do this later and 10 Windows wakes in the coming days.

• I have iphone 5 c. I've updated new version 10.0.2. Now Weather app is working for different cities but does not not for my site which has already been demonstrated in latitude and longitude. Similarly maps application also does not work for my site

  I have iphone 5 c. I've updated new version 10.0.2. Now Weather app is working for different cities but does not not for my site which has already been demonstrated in latitude and longitude. Similarly maps application does not also work for my site.

  Settings > privacy > location Services > confirm you always give permission to these applications to use your location.

  If not, try these standard troubleshooting steps.

  -Reset: hold the Home and Power buttons until you see the logo Apple (10-15 seconds).

  -Restore your iDevice: https://support.apple.com/en-us/HT204184

  If your backup is in iTunes, make sure that it is encrypted.

• I want to connect my Macbook Air (IOS 10.9.5) with my amp stereo House (TEAC I-501DA), which has a USB connection. I followed the steps described in the manual TEAC to install the driver and my Mac says it is installed correctly, but it does not appear I

  I want to connect my Macbook Air (IOS X 10.9.5) with my amp stereo House (TEAC I-501DA), which has a USB connection. I followed the steps described in the manual TEAC to install the driver and my Mac says it is installed correctly, but it does not appear as an option in the preferences/system sounds.

  Version 1.1.2.2 El Capitan driver support, then why don't upgrade you your MacBook Air to El Capitan?

• can I use a mini ipad 4 (which has more cellular wifi) without sim card installed

  can I use a mini ipad 4 (which has more cellular wifi) without sim card?   I managed to update to 9.3.3 but the wifi keep disconnecting and lock the screen when I go to settings, Wifi.

  Yes, you can remove the sim card. The iPad will be only nag you about the missing card every now and then. But the sim card has nothing to do with wifi...

• Audio input on mac (MacBook Pro (retina, 13 inch, mid-2014) which has a single audio port for headphones and number of PORT of ENTRY.

  How to do on my MacBook Pro (retina, 13 inch, mid-2014), which has only a headphone audio input port? Do Garageband, or Preferences/audio, or Audioand MIDI or what?

  Connect an audio interface to a USB port to have an audio input, or insert a divider entry in the headphone port. You need additional hardware to have an audio input.

• How to get pictures of my iPhoto library that is saved on time capsule on my MacBook Pro, which has pictures instead of iPhoto?   My old MacBook Pro died.

  How to get pictures of my iPhoto library that is saved on time capsule on my MacBook Pro, which has pictures instead of iPhoto?   My old MacBook Pro died.

  How to import old backups Time Machine photos on a new computer iPhoto libraries

• How to import bookmarks into Firefox from another disk hard which has Firefox installed on it but is no longer the primary drive?

  I was running firefox on your desktop. The hard drive became unusable as the main drive, either because of a software installation which has left the operating system unstable or malicious software or both. The hard drive has been cleaned of malware, but has been replaced by a new hard disk that has a new installation of firefox. Operating has been and is Windows XP. The old hard disk which is now F:\ is still in the computer. There are lots and lots of bookmarks on F; \... Firefox I need to import the Firefox on C:\. In my opinion, these are the .json files. Can I copy and paste or import bookmarks?

  See:

  • https://support.Mozilla.org/KB/recovering+important+data+from+an+old+profile
  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
  • http://KB.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

• How can I get rid of the toolbar Yahoo, which has been installed without my permission?

  All I wanted was to download a Power Point Player. Instead, I had I don't know how many modules that I never asked and have now TWO toolbars of Yahoo at the top of my Firefox browser! How can I get rid of these? I tried to install a previous version of Firefox, which has not helped at all. Apparently, Firefox can remember everything you have ever done because toolbars are still there. I really get off on sites web loading things on my computer without my permission. Please help, everybody!

  VERY DANGEROUS as there are KNOWN security flaws that make it very likely your machine will become infected.

  If you are not running 3.6.24 you update as soon as POSSIBLE. http://www.Mozilla.com/en-us/Firefox/all-older.html

  If you actually run 3.6.8 you skip these instructions.