Partitions of disk, and Apple TV

Similar Questions

• I'm having a problem reinstalling Windows XP. After formatting the disk and create partitions, it will not complete the installation.

  Problem reinstalling Windows XP

  I'm having a problem reinstalling Windows XP.  After formatting the disk and create partitions, it will not complete the installation.  He goes back and reinstall Windows again.  I go through the installation of 39 minutes, the computer restarts to complete and it loops back and start the installation again. Why it does this and what I can do to move beyond this?

  Go into the BIOS and make sure that you your hard drive is not set to off, and that is the first priority boot CD and your second HD.

  Don't push when it restarts anything just to let him do what he does and report back if anything I'm sorry I have no idea.

• Is there a way to unformat a partition on a disk and recover files that have been on it?

  IS ther a way to unformat a partition on a disk and recover files that have been on it. ? I used the command prompt utility to clean and reformat the partition? Is there a cancellation format and retrieve files, command that can do this? AND my next question is? WHY HASN'T SOMEONE MADE SUCH A PROGRAM? Believe it or not, it was the first time something actually worked for me in the command prompt? And now I need it back? LOL or is there a way I can get the pc to boot from C:\ By car? system is vista

  Hello

  Once it is cleared it is wiped

  that this has something to do with remove you your recovery partition?

  If Yes, read your other thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/vistais-missing-the/c5093d6a-B159-E011-8dfc-68b599b31bf5

• What is the right way to expand the virtual disk and then the OS partition?

  I have a Windows XP operating system in a virtual machine VMware.  I have

  you want to increase the size of the hard drive.  It currently has a 50 GB

  partition on a 50 GB VHD.  I increase the size of the

  50 GB to 100 GB in VMware virtual hard drive.  Then, can I use

  Windows disk management to increase the size of my partition of the

  side OS to use all the 100GB he sees now?  Or will

  corrupt my data or cause a problem as I really need to

  use a third party tool like EAUSUS inside Windows to extend Windows

  on the size of the virtual hard disk?

  In fact the way you describe, resize the virtual disk and then developing the partition are the way to go. But there are some things that you should be

  aware of.

  -If the VHD is on an IDE controller, you may not be able to resize the virtual disk. In this case use the converter. With the converter, you can resize the disk including the partition and - if desired - replace the IDE controller by a SCSI controller.

  -If you have only one partition under XP (that is, drive c :)) you cannot extend the partition with the diskmanager/diskpart. In this case, start your virtual machine from a CD/DVD Vista/Windows 7 in Repair Mode, open a command line and use "diskpart" from there to "extend" your partition.

  André

• Re: lost recovery disk and partition recovery

  My daughter managed to destroy Vista on her laptop. Problem now is that she can not find the recovery disk and formatted the whole c: drive. Is it possible that she can get the operating system from somewhere, because she still has his serial number... good job, he's stuck at the bottom of the lappy.

  As I see it, you have no more options like:

  1 the order [Recovery disk | https://backupmedia.toshiba.eu/landing.aspx] Toshiba for the money and wait 2 weeks
  2 get Windows copy to install. All the drivers/utilities Toshiba you can download it from [Page Driver Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]
  If you need assistance in order to install driver, can help you

  The product key that she belongs to original recovery image, that you got with your laptop and it is not a universal key that you can use with each installation of the OS.

  Post edited by: Jeka -?

• no boot found device, insert the boot disk and press any key

  Hello, recently tried to install Windows 10 through the Assistant Boot Camp, with the help of a DVD I bought windows. But I get an error saying "no devices found Boot insert boot disk and press a key" I tried to read and do all the patches, all offer and yet no results. Any suggestions or corrections us would be great!

  MacBook Pro mid 2012

  -i7

  Evo - Samsung 500GB SSD

  -Ram 16

  -Latest version of Mac OS x

  -L' use of 64 GB PNY flash drive

  Your Mac 2012 supported creating a USB Installer to help BC Assistant. Do not use a DVD, a USB Flash drive. Your USB drive must be a USB2 flash drive, if you choose the USB mode and you will need a Windows ISO.

  See also create an ISO image for Windows - Apple Support installation media Boot Camp .

• Want to format a disk and set up time machine

  Hi all

  I don't currently have access to a MAC, so yo please would undergo some basic questions?

  I have a client with a G-Drive 2 GB with NTFS.   I would like to format it for what is Time Machine friendly and configure for Time Machine.  Could someone point me to the proper indication?

  How to partition and format the disk and what (FS) file system should I use?

  Time Machine RESIDE on every MAC or what I need to download and install it?

  Where the time Machine?  Utility applications?

  Thank you very much

  T

  I see on the web when you plug the thing, get you will invite to time machine.

  1. consider a Mac and then see #5.

  2. see #5.

  3 Time Machine is present on every Mac running 10.5 and newer.

  4 elements of it are in system preferences, then the Applications folder.

  5. Yes, you will be. Time Machine manages the process of formatting before the first backup.

  (142901)

• How to resize partitions of disk on Satellite A300-14V?

  Hello

  A drive in my Toshiba Satellite A300 14V 320 is divided two equal C: and E: volumes. The c: volume contains Vista OS, programs and lots of user data. The E: volume is the folder HDDRecovery contains it is about 4 GB, but when I check the properties of the volume E: I see 30 GB of used space. Could someone explain what is the problem?
  And there's a question related - why I am able to reduce volume E: only for about 12 GB and not able at all to expand the C: volume by Windows tools? Do I have to use commercial software to perform the task or it is easier and cheaper to reinstall the system with a disk-resuscitator?

  Thanks and regards,
  Alexander

  All new Toshiba laptops have this partition structure. On the second partition you have folder named HDDRecovery that contains the recovery image. This image will be used if you want to install HARD drive recovery facility - http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

  On the second partition, you can also save all your important data. This second partition is not reserved for the recovery image only. Very important, it is follow:
  # When you want to install the OS by using restore DVD disc the whole HARD disk will be formatted and all data will be gone.
  # When you use second partition of disk HARD recovery option will not be changed. This means that all data stored on the second partition will be there even if you have installed the operating system again.

  It is therefore recommended that you save all important data, music, movies, photos, or different documents on the second partition. If you want to use this HARD drive recovery option in the future please do not change the partition structure. When something is changed, it can happen that you will not be able to start the installation of HARD drive recovery.

  If you care about second partition and if you created recovery DVD discs, you can with the partitions all you want.

  If you have any other questions please let me know.

• Pavilion 15-ab216ut: for the RECOVERY Partition low disk space warning

  SPACE LOW CONSTANT WARNINGS for D: drive or recovery drive.  Win 10-1511
  This machine, by default, had System restore ON D: (recovery Partition) and OFF to C:?
  And noted that the items on this drive the recyclebin stored automatically deleted
  
  Partition is 7.36 MB free 19 GB?
  
  Reduced size allowed for d: to 1 MB
  System restore disabled on D:
  
  and emptied the Recycle Bin.
  
  Made sure the restore files are present
  
  Am tempted to turn off space low attention entirely... but not desirable?
  
  Only solution I see is to use a disk partitioning tool C: reduce and enlarge d:?   Is what he... or is there an option that I'm still learning?
  And WHY in the default config is disabled on C and enabled on D system files?

  As stated in my post... tried everything...
  
  Resolved: I Resized deliver two primary partitions... a lot of movement and handles... not to damage or lose the System Partitions.  now having 1 GB free on the RECOVERY partition... and no warning...
  NOT a good experience OOB...

• Bootcamp - Windows 10 should not see or read files from the disk HARD Apple intern.

  I have just successfully Windows 10 next OS X on my 15 "Macbook Pro mid-2014.

  Windows 10 should not see or read files from the disk HARD Apple intern.

  Should which driver I uninstall?

  On OSX, if the following Terminal command produces any output, then you cannot read partition OSX on the side Windows? FileVault2 will also disable access to the OSX partition.

  Cs diskutil list

• Accidentally formatted partition 0 disk 4 BOOTCAMP Windows 8.1

  Yesterday I bought Windows 8.1 and began installing Bootcamp. I got through all the steps and got to the page collection of information on the windows OS. I filled everything, product key and all. Then I got to the page of partitions, I chose 0 4 Partition drive. I then clicked format (not realizing really what it was). Once I couldn't install windows. He told me that the reader must be in NTFS format. I did not remove the main MAC OS. I looked at many solutions, but they worked not or that they were too old for my computer. I gave an amount of space to 243.21 to Windows. If someone could help it would be greatly appreciated!

  Data sheet:

  iMac 27 "end 2013

  Version: 10.11.3 OS X El Capitan

  Processor: 3.2 GHz Intel Core i5

  Memory: 8 GB 1600 MHz DDR3

  

  Hi, Overtile.

  Please visit Apple support communities.

  I see you are trying to install Windows on your Mac via Boot Camp and need help.  You have already created the partition, so you change the format of this partition to NTFS and then go through the installation.  I've included some guides below that will guide you through this process.

  Set up Windows on your Mac partition

  How to install Windows using Boot Camp

  See you soon

• Pavilion dv6 - 7095ca: no boot device - insert boot disk and press any key

  
  

  Thanks for your help and please excuse my bad English.
  Please check item 7, if you're in a hurry. This is the point with my Pavilion DV6 - 7095-CA:

  (1) the operating system is Windows 7 Home Premium (64 bit), the provided original with my 7095CA Pavilion, more updates HP until 2013, and all Windows updates until July 2015.

  (2) now I can't access the operating system and I have no interface UEFI. I can see that I press F2 at startup, just a test simple disk in BIOS f.0Une (the test shows that the disc is OK)

  (3) return in 2013 it took a drive failure. I did replace the disk and reinstall original Win7, all updates, including the HPS, win7 updates and all my personal software.

  (4) at this time, I bought a spare hard drive and did a complete copy of the disc using Partition Wizard bootable cd. The second disc has been tested and worked perfectly, with all of my personal software on this subject.

  So I have 2 HDs identical with the same system on both drives, fully working and tested.

  (5) a few days ago I came across the HP website and made a few updates, including the BIOS f.0Une (the last BIOS update, was of course).

  (6) after BIOS update ran, I received the message "no boot device - insert boot disk and press any key".

  (7) I couldn't solve the problem, so I did remove the hard drive and install my backup drive, which lay in a dry place without danger from 2013.

  (8) I turned on the computer and got the same message "No boot device - insert boot disk and press any key", and I couldn't find any way to solve this problem.

  Now I'm doing a new installation on a third HD everything works very well, so far, in the new facility and I will never buy HP again.

• Backup on USB fails for lack of space; but it's a blank disk and there is no files on it!

  I have improved my NV + v1 (4.1.14) with 4 x 2 TB drives and I met the 4 k block size problem. So I'll try my backup device so that I can factory reset it.

  The current size of the volume is 1.3 to, so I took on one of the 2 TB drives to use as a backup via USB. 1.3 TB should fit easily in 2 TB, right?

  I added the 2 TB drive to the front USB port and formatted in ext3, it shows very well in stocks and a space free expected.

  So I made a backup and the source = task share / dest = USB/Sharename/and he ran.

  It works for a few minutes and stops with this error:

  Encountered error copying data from the source ==> /USB_HDD_4_1 path / / bla due to lack of disk space. [Job 003]

  I look at the USB and it is FULL. Zero byte available. He made a few records, but they are all empty.

  What is going on?

  Are there hidden files (.appledouble, etc.)? I ran BlueHarvest on the volume before the backup, and he deleted a bunch of them. But not 2 value of TB.

  I use this volume mainly with my Mac... am I missing?

  Any help is appreciated! Thank you

  OK, I got the multiple partition problem.

  When partitioning a disk with Mac disk utility, it creates a partition from FAT32 MASK called EFI which is used for Intel to start. The EFI partition is confusing RAIDiator and leading them to try to use the small EFI partition instead of the large main.

  Since I am not start this drive (it's only for backup), it is safe to remove it. You must enable a debug option to see the partition in disk utility. Google search for "EFI Partition delete on mac" to see how to do it.

  Also, I used EXTfs for mac by Paragon Software that allows you to create and mount ext3 on your mac partitions. http://www.Paragon-drivers.com/ExtFS-Mac/

  Backup operation runs now... If all goes well, it ends with success!

• No boot device - insert boot disk and press any key

  Hello

  I was with boot camp to install 10 Windows from a usb key. The first problem I encountered was an error message stating that Windows supports software could not be downloaded on my flash drive. I read that the necessary drivers could be installed later so I unchecked the box. The part of the installation, then training camp as it should (create a partition etc.)

  However, when the Mac went to restart and (probably) to start the program installation of Windows, the error message "No boot device - insert boot disk and press any key" displayed. My problem is the wireless keyboard does not respond and the light on this issue seems to suggest that it is not connected. My guess is that the drivers needed, such as Bluetooth are not there.

  I'd be happy enough to restart OS x and forget all about Windows, but I can't see how to get around this problem?

  A wired keyboard could work?

  any help is appreciated!

  Thanks in advance

  Max.

  A wired keyboard and mouse will work. If you try to install Windows and tried to download the Windows software on a wireless network, try a wired connection. to rebuild your USB Installer.

• Need help with the disks 'unreadable' configuring software raid after the death of the startup disk and system restored.

  I'm looking for some advice on how to restore a windows xp installation software raid 5 that was running on my XP system. I had a problem when the startup disk has failed, but I was able to backup the system before it can. I replaced the drive and restored the system and everything came, but I was not smart to do this and accidently left the readers connected when restoring raid. I don't know if windows has done something when I tried to install XP on the new drive, or maybe something else has happened when I restored the system from the backup, but my raid drives can not be used. There was a moment in the restaurant business I saw a message on the MBR, but I thought that was just for the drive being restored. I didn't have a single player who held any information on the other disks in the system, but I'm not 100% sure on that.

  When the system boots the windows logo screen takes 10-20 minutes before you get on the desktop. Windows Disk Manager takes 20-30 minutes to fill the list of drives and status on the disks three raid is 'dynamic' and 'unreadable' is not reassuring. I suspect it's a problem MBR or partition table that must be corrected before trying to reactive the raid, but this is just speculation.

  The raid drives are on a promise ide/scsi disk and make it appear to start correctly with names and sizes. After that I get nothing. I do not have another scsi controller (or), but I thought I'd try active @ partition recovery to see if she can find information on the disks.

  I hope someone has some experience with recovery like this, because this is a first for me. I thought I was pretty sure running a raid-5, but wouldn't you know, the tech gods have found a way to crush my plans...

  Thanks in advance for any help!

  Hello

  Thank you for visiting the Microsoft answers community site. Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the TechNet Windows XP IT Pro Forums.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads