Pass the SWF animation in Flash Pro

Similar Questions

• SWF (made through Flash Pro CS5.5) and published in the playbook (via the flash AS3 generator project) is incredibly, incredibly slow.

  Hello. As said, it's horribly slow.

  It is a simple slap a mole, with 9 total game hit areas, with animation by MC popping up randomly in the regions and a timer to countdown a minute.

  The timer is operating at about a quarter of the speed should be. A second takes about four. My animations are also stuttery. My FPS in my flash game is set to 120. (If there is a ton of objects on stage, I get the big slowdowns, that I expected, but the full game seems to work at a slower than expected level)

  I tried GPU/CPU rendering (both on the swf and FB project), but also to tweak the game to speed it up.

  I was wondering if anyone has a solution as to why these games so run slow. I do not have the resolution of the game the value 600 x 1024 (portrait), is this correct? Or should I make a game of 300 x 640 and fullscreening it.

  I tried HTML5 as well, integrating flash. It works just as slow (unless miss me an option of rendering in config.xml or something)

  It turns out I was right. I was overloading the first image with kidnapping event handler commands

  These event handlers had been removed in other frames before moving the playhead to frame 1, so the code on frame 1 was redundant. hope that helps

• Loading the Swf file in Flash animation articulated Quiz

  Hey everybody.  My boss made a quiz for the film Flash I do, using the software Quizmaker articulate, and he recorded as a swf file.  He plays a lot in Flash Player and Flash.  Now, I try to use my main Flash file to call the SWF of quiz and play at the end of my film.  The main Flash file is configured as an array of swf, calling different swf files that I want him to play in order.  I want this quiz swf file to play to the end.

  However, when I do that and I publish the file, I just get a white screen when he tries to load the SWF of quiz and a bunch of code in Flash that opens.  What is going on?  How can I load the quiz swf file in my Flash animation?  Does anyone know?  Help would be much appreciated!  Thank you!

  If you can put the quiz file in the same folder as the main file and make it work, then you should be able to load the quiz in the main file and make it work.

  If the quiz file is an AS3, you're outta luck.

• is there a way to open the SWF in a flash animation

  I want to change my Web site, so that when you click a button on the flash animation, it opens a swf file in flash but I want the swf file in a file separate from the lightning, is this possible, if so how?

  Quite possible and very widely used for years - and a feature well documented -'s called it
  loadMovie - pressing F1 and search the help documentation AS for him - or go oto
  www.Kirupa.com
  www.gotoandlearn.com
  www.Lynda.com
  www.Google.com

  thyere has tons of tutorials on different ways to dynamically load a swf into your flash
  project.

  ******************************************
  --> * Adobe Certified Expert *.
  --> www.mudbubble.com
  --> www.keyframer.com

  shlurd wrote:
  > I want to change my website so that when you click on a button on the flash animation
  > it opens a swf file in flash, but I want the swf in a separate file
  > Flash, is this possible, if so, how?
  >

• Open the old SWF files in Flash Pro (was: old files .swf)

  I have a lot of old created .swf files in 2001 that I'd like to update. The version of Flash, I have currently is Creative suite 5 will not be open. What do you recommend?

  Cannot open SWF files in Flash Professional.  To open SWF files, you must use Flash Player runtime.

  Flash Professional can be used to open the .fla and then files when you publish the .fla file, it generates corresponding .swf files that can be played in Flash Player.

  If you work, you can copy paste this work into the document to ActionScript 3.0 created in Flash Professional CC 2014.

  Rgds,

  Mukesh

• How can I get rid of the splash screen in Flash Pro cs6

  I used flash in its early versions, but didn't have a reason to use it for many years. I installed it on my desktop and now find myself needing to use it for a small project. So I open the program, and of course, it is open to this really annoying splash screen. and it turns out that I can't find any way to leave this splash screen. My screen resolution is at 1024 X 768, and I can see easily all the splash screen. But what I don't see is somehow too leave this screen which is a real issue because it allows me to continue my project. I even chose one of the enumerated option; "Flash project", but still the splash screen does not disappear.

  How can I get rid of the splash screen & can I make disappear forever. ???

  When you open CS6 and that you can't get anywhere, you can always select Preferences. There, under general, you can select which shows when you open Flash Pro. Change the welcome move on screen.

• Where are the 'shared libraries' in Flash Pro CC?

  Hello

  I take a Flash for a short time, and in the instructions for one of my assignments, he wrote:

  "To access these libraries from your menu bar, go to window > common libraries > buttons. "

  A new library panel will open giving you access to a wide range of possibilities. The buttons

  are stored in folders that you have to double-click to open it. They are organized into categories. »

  This sounds good... except there is no such list when I click on the 'window' pull-down menu.

  in submenus, or.

  

  Does this mean I have to somehow download the libraries from Adobe? I tried thinking it out on mine and search Adobe site;

  but couldn't find an answer.

  Any help would be greatly appreciated! Thanks in advance!

  Read the last answer about it: I can't find the menu common libraries. I am running Flash Pro CC on a PC.

• How to view PDF files, inside the SWF or exe flash

  I create demand for employee details using flash actionscript 3.0

  This application is to display the details of employee organization, iam using the tree component in the present application,

  the tree component is to get the dada via xml file, save this xml file on the remote server.

  I display the PDF inside the SWF to the class 'StageWebView' help. Then I goto publish setting to change the Player Adobe Air 2.6 and run the file using flash

  CTR - l + enter. It's work correctly, the PDF appears inside the Swf output. But I publish this exe file. then I run the exe that does not work.

  The application is run, the xml data are get onely and display component of the tree, then I click on the name of the employee to point tree not display xml data and the pdf file is not open.

  Pls Help...

  StageWebView is an air 2.5, or the best class.  StageWebView not available for exe or swf embedded in html.

• link to the page on the press to play the swf animation

  Hello

  I'm sure I can do this in Flash but didn't do in Dreamweaver for SEO purposes.

  When you press each link on the page the animation will play, obviously before going to the directed page.

  Any pointers?

  Many thanks and best regards, Damien

  Hello

  You can use javascript or jQuery to capture and prevent the default action for a length of time while playback of the animation, then navigate to the location of the links once completed.

  PZ

• How to pass the tabbed window in Acrobat Pro ms?

  Hi all

  I was hoping that someone could tell me - how do you spend a view of a display tabbed window in Acrobat Pro ms?

  Currently, Acrobat opens all PDFs again in a completely separate window; I would give as Acrobat only give a single window, but with several tabs - one for each PDF.

  I searched long enough and have found solutions that seem as if they had some work for other versions - but if you follow the same instructions, I find myself in a menu with various selection options. I'll provide a screenshot and a link to the instructions I found (they're all pretty similar).

  I checked each of the categories and can't seem to find the option anywhere. I've also looked through the Adobe Acrobat DC helps PDFand can't seem to find the answer.

  Does anyone have an idea how can I change a window to display tabs?

  Thank you in advance for your help!

  Operating instructions: the -keeping tabs on your Documents. Adobe Document Cloud

  Screenshot of the menu - missing of the relevant selection box:

  

  Maybe you don't have the subscription - only subscription feature. Permanent licence holders will be able to upgrade someday, we imagine.

• How the code orientation for flash pro mobile app?

  Hello

  I would like to know how to do coding for orientation and text slides up/down of mobile app created with flash professional.

  Thank you

  AFM

  Flash for Mobile orientation is in the descriptor XML apps. It has always been relatively the same since the beginning. This is a simple article about it:

  http://www.Adobe.com/devnet/flash/articles/screen_orientation_apis.html

  In what concerns the text by dragging upwards or downwards, in Flash it will always be the same. Position x / y and move it along the same x / y, the same things you've always done. Nothing is different from the original Flash about the scene as much as goes mobile.

• How to create the energy bar with flash pro?

  Hello

  How to create an energy bar as what you see in flash facebook games, which increases with time "as every minute add 1 energy point' and reduce playing a role or a battle or just do an action?

  You can simply use a rectangular moviweclip/sprite and use Actionscript to control the width (or height), where the energy is proportional to the value of the width (or height).  You can also pair with a textfield that allows you to display the actual value of energy as it changes.

• Can I use the XCode with CS6 Flash Pro iPhoneSumulator

  I think it's possible, but I can't find clues on how to start.

  Anyone know how I can use it. The Adobe iphone Simulator is not very helpful at all. and does that iphone Anuak

  Thank you

  Assuming that you are aware of the CS6 updates, and you have installed XCode, you do the following:

  In your FLA that is configured to use AIR 3.4 or later, look in the application settings, general tab.

  You should see a field labeled "iOS Simulator SDK: Here, you put the full path to the Simulator. The path is more likely to be:

  /Applications/XCode.app/Contents/developer/platforms/iPhoneSimulator.platform/developer/SD Ks/iPhoneSimulator6.0.sdk

  Once you have done this, you should be able to do the two film of Control/Test/iOS Simulator and the Debug/Debug/iOS Simulator movie.

  If you do the debug version, wait the progress edition disappeared, the Simulator is open in the background and select Debug/Begin Remote Debug Session / ActionScript 3.0. Once Flash is "waiting for connection", hover over the Simulator and open your application.

  You can see that the icon is on the second page of icons. As you would on the iPhone, you can move the icon in the dock of the Simulator, or on the first page of the icons. Then when you other tests the app will be installed in this location.

  By using the Simulator will save you hours of time!

  Oh, one other thing - you can simulate multitouch by holding down the Option key, which will give you two points in finger on the Simulator screen mirror, which is good for stocks pinch test. If you also have the SHIFT key, you will be able to simulate stock pan.

• Compile the SWF version 14 (3.1 Air) of Flash Pro CS55 possible?

  Dear Adobe community,

  Anyone could take a FLA file in Flash Pro CS55 and 'release' a SWF as a version 14 (3.1 Air)? I try to use a native extension for iOS on GitHub, but my app is in Flash Pro and so were the publication, then using ADT to compile native extensions I need. However, to use the features of iOS5 (and add additional frames of Xcode as MessageUI), the swf file must be version 14.

  With the last update of Flash Pro CS55, my compiled SWF files are version 13, and when I try to publish an ipa-ad-hoc file, it tells me that version 'root swf file' is 13, while the extension (I'm assuming that library.swf) is in version 14. Of course, I tried the Air SDK 3.1 coming overlap appropriate within CS55, directories like I did with Air SDK 3.0, but no go?

  Thanks and regards,

  Alex

  The answer is Yes.

  It took me a few hours to realize what was wrong. Some time ago I've superimposed SDK 3.1. I changed the version from 11 to 13 as suggested in step 12 in the instructions here:

  http://kb2.Adobe.com/CPS/908/cpsid_90810.html

  I remember having trouble with it, but it finally worked. Now, I had to spend up to 14, and I had the same problem. It took me a few hours to resolve.

  There seems to be an undocumented problem with to change the version number in the players xml files. It seems that the data in these files are actually stored in the fla file. This means that the data of a specific fla file are not updated until that you enable the setting-player slot the > Publish. This worked for me, after upgrading the Air for Android and then come back to look for iOS.

  I hope this can help.

• convert the fla in exe in flash pro cc

  How to convert exe fla files in flash pro cc to play on the other pc/mac window?

  Hello

  Export the fla to exe/dmg format is available in Flash CC 2014.

  The export option projector Flash Pro CC 2014 option is available in menu commands. Try the commands > export under the spotlight.

  For more information, please visit https://helpx.adobe.com/flash/using/exporting-projector-files.html

  If you do not have Flash CC 2014 (build 14.0.0.110) please download and install the same from https://creative.adobe.com/products/download/flash

  Thank you!

  Mohan