pass the user's question

Similar Questions

• my windows vista starts normally until I have pass the user coice screene. After that, I see the cursor but everything is black. What should I do? Thank you very much!

  my windows vista starts normally until I have pass the user coice screene. After that, I see the cursor but everything is black. What should I do?

  It was probably caused by the removal of any file system as I was scaning the pc for malware and probably deleted some important file. only safe mode works now
  and I need my computer quite urgent for the University.
  Thank you very much!

  Hello

  No saving necessary data and re-installing Windows Vista might be the best option, but here
  are a few others.

  You can save your files by putting the drive in another computer as a 2nd disk (best) or external
  Drive USB enclosure and then backup to removable media such as CD, DVD or other USB drives.
  Of course a real store of the computer or the manufacturer of your system can help to recover the files.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  --------------------------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  A method to try to get to the desktop (try in normal Windows Mode without failure) is CTRL +.
  ALT + DELETE - Manager tasks and tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is available by
  repeatedly tapping F8 as you start. CTRL + SHIFT + ESC also begins the Task Manager.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (a line type or copy and paste one line at a time and hit enter - enter a bracket)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)

  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How to pass the user name dynamically in file .jca Oracle Apps adapter

  My BPEL process using Oracle Applications adapter. Here is the file .jca for the adapter.  The user name is statically initialized to "sysadmin" when I created the adapter. How can I change this to move dynamically during execution? Can I use an EL Expression or a variable of XPath. If yes how and what is the correct syntax?

  Is it possible to pass the user name of the security policy of OWSM for the value of username below? If yes how? I appreciate your response.

  " < name of the adapter-config = adapter 'EBSAdapter' = 'Apps' wsdlLocation =".. / WSDLs/EBSAdapter.wsdl "xmlns =" http://platform.integration.Oracle/blocks/adapter/FW/metadata « >

  < UIConnectionName factory connections = "EBS1" location = ' ist/Apps/EBS1"UIConcurrentPgmName =" "UIOracleAppType = 'DBOBJECT' / >"

  < endpoint-interaction portType = operation "EBSAdapter_ptt" = "EBSAdapter" >

  < className = "oracle.tip.adapter.apps.AppsStoredProcedureInteractionSpec interaction-spec" >

  < property name = "SchemaName" value = "APPS" / >

  < property name = "PackageName" value = "JAN" / >

  < property name = "Procedurename" value = "GET_USER_PROFILE1" / >

  < property name = "IRepInternalName" value = "PLSQL:INTG:WEBCENTER_GET_USER_PROFILE1" / >

  < property name = value "Username" = "sysadmin" / >

  < property name = value of 'Responsibility' = "system administrator" / >

  < / interaction-spec >

  < / interaction of endpoint >

  < / adapter-config >

  1. go on the Invoke activity

  2. click on the Properties tab.

  3. click on add

  4 Add this 'jca.apps.Username' property and map with variable or expression.

  5. fill the variable defined in the previous step with valid username values during execution.

  I hope this helps.

  Kind regards

  Karan

  Oracle Fusion Middleware Blog

• How to pass the user/pass of OSB to a secure service

  How to pass the user/pass of OSB to a secure service

  http://download.Oracle.com/docs/CD/E13159_01/OSB/docs10gr3/consolehelp/serviceAccounts.html

• How to pass the user to the current provider 11.1.1.3?

  Hello
  After I connect to Smartview in Excel by using common provider 11.1.1.3, I seem not to be able to change my login ID. It always automatically connect me as my 1st login ID.
  How to pass the user to the current provider 11.1.1.3?

  Hello

  If you right-click on the essbase server and select "Invalider SSO" and then disconnect > commune of provider connection.
  When you connect again it should ask you your login information.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• &lt; critical &gt; &lt; WebLogicServer &gt; &lt; BEA-000254 &gt; &lt; cannot pass the user "psoftusr".

  Hi all.
  
  have a customer problem with permission to userid where they get an error in the application of patches.
  
  It's customers comment:
  
  We suspect that our psoftusr of the user who starts the Web server on a port higher than 1024 doesn't have the correct permissions to start
  without getting the error
  
  August 30, 2008 9:16:41 CEST > < critical > < WebLogicServer > < BEA-000254 >
  < cannot pass the user "psoftusr". java.lang.IllegalArgumentException: cannot initgroups(3) ("psoftusr"), system error: "no owner".
  
  
  
  problem is that once I go into the Admin Console and change the settings to enable the liaison post UID.
  
  After all I change the default page I have no problem.
  
  
  CT needs to know what permissions are psoftusr must have to be able to get rid of this error message?
  psoftusr is the id used to install the software in the first place.
  
  
  so far, the file permissions are set correctly in the LDAP directory.
  
  
  any thoughts...
  Thank you
  t

  CT is about PTools 8.49 and BEA_home is not under PS_Home, it would make everything about the difference in access to this user name?
  CT does not see the House under the envsetup (UNIX) BEA? How can they add that, to be part of the env? Maybe this could be one of the reasons...
  THX

• Repeated failed installs Ko 977074, 978506, 978506. O/s of hanging in the journal began or pass the user's request.

  OK, here's my story:

  Windows 7 Home Premium, solid running, since 13/10/09
  History of failure of 974431 update that the next day, he managed without my taken part troubleshooting.  No complaints since more about 1 week ago got a BSoD outside no where while my child is on a restricted user account using IE.  Has not returned since, but suffice it to say.
  So now it's 26/01/10 and an update to install Windows Defender K915597 with success.  Cool deal.  It end tonight here and he says it is to install the updates and then stops.  Next day:
  1/27 - KB976972 failed
  1/27 - KB978506 failed
  1/27 - KB977074 failed
  1/27 - KB976972 failed
  1/27 - KB978506 failed
  1/27 - KB977074 failed
  1/27 - office Live add-in 1.4 successful
  1/27 - KB976972 failed
  1/27 - driver update successful
  1/27 - KB977074 failed
  1/27 - KB976972 failed
  1/27 - KB978506 failed
  1/27 - KB977074 failed
  See a pattern here?  So I should also mention that all of a sudden if I click log off or switch users while one of these updates says waiting and not pass/fail it hangs on Please wait... I waited about 10 minutes (normally it's about 10 seconds for the newspaper and immediate to change user) then have to restart the computer or force the feeding cycle.  So I decided to uncheck the Group of updates and just try one at a time through the automatic updates.

  Wait what he...

  1/28 - KB976972 successful

  1/28 - KB978506 successful

  1/28 - KB977074 successful

  1/28 - KB915597 successful (Windows Defender again)

  Hooray! life is good again!

  It end tonight here and he said please wait... Configuration of windows or something like this.  Odd.  Given that all of the updates succeeded and I had no updates available message.  Well it stops down.

  On the morning.  Please wait while windows configures (or other) updates failed returning changes.  What updates?  They managed you cursed!

  29/1 - KB976972 failed (what  Wait.  What?)

  1/29 - KB978506 failed (what  Wait.  What?)

  1/29 - KB977074 failed (what  Wait.  What
  ?)
  1/30 - KB976972 failed
  1/30 - KB978506 failed
  1/30 - KB977074 failed
  1/30 - KB978506 failed (me trying just the update to the compatibility mode)
  1/31 - KB977074 failed (my download and try to install the update manually)
  So there is some sort of timeline for what it's worth.  So basically three updates repeatedly failing and play with my head.   Here are the error codes for each of them:
  Update for Internet explore 8 Compatibility View List for Windows 7 (KB978506)

  Installation status: failed

  Error details: Code 80004004

  Update for Windows 7 (KB977074)

  Installation status: failed

  Error details: Code 80004004
  Update for Windows 7 (KB976972)

  Installation status: failed

  Error details: Code 80004004

  More potentially useful data.  I have manually install a (977074), said she is successful and I want to reboot, Yes, please wait windows configuration, stops, comes up, please wait configuration updates, no error, log, look at the history of the update, says "pending" 977074 next, I reboot on mine, please wait windows configuration, stop , rises, please wait for configuration updates, UPDATES COULD not return changes, allows me to connect... She does it every time.

  So I think I'll just deselect all and hide updates, screw it right?  I don't really have the situations these difficulty going home anyway.  So all deselected.  No found update, green check in Windows doesn't update.  Everything is cool.  Stop this night here, please wait windows configuration, stops, appears, wait for updated configuration to update, UPDATES FAIL back.

  And yet, he is suspended when the logoff or switch user thing.

  Seriously.  What is going on?

  Hello
   
  First, install the system tool using the link provided: http://support.microsoft.com/default.aspx/kb/947821
   
  Then, run boot.
   
  To help troubleshoot error messages and other issues, you can try to troubleshoot this issue with a clean boot to see if we can identify a program or driver causing the problem you are experiencing.
  A clean boot to start Windows with some programs and drivers off or on selection. By doing this through trials and errors we can hopefully identify a specific cause of this problem. Here's how to solve problems with a clean boot:

  Clean clean boot.

  1. click on start, type msconfig in the search box and press ENTER.
  The user account control permission.
  If you are prompted for an administrator password or confirmation, type
  password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load starting points.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.
   
  If the problem is resolved, make sure what third-party program is at the origin of the problem, referring to the link given below:

  http://support.Microsoft.com/kb/929135
   
  Reset the computer to start as usual.

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  Click Start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue. On the general tab, click the Normal startup option, and then click OK.
  When you are prompted to restart the computer, click on restart.
   
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
   
  1. click the Start button, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  2. on the general tab, click the Normal startup option, and then click OK.
  3. When you are prompted to restart the computer, click on restart.
   
  If you are still experiencing a problem, try the following:
   
  I suggest to download the update manually and install it. Use the link below to download the update.
   
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=6711bec7-130F-4244-A13C-675bd9e42298&displaylang=en
   
  If this does not resolve the issue, I suggest you to reset windows update by following the steps listed in the article below:
   
  How to reset the Windows Update components?
   
  http://support.Microsoft.com/kb/971058
   
  You can also use the "Fix it" described in the article above solution.
   
  For more information on August 2009 Windows Vista and Windows Server 2008 Application Compatibility Update, follow this link:
   
  http://support.Microsoft.com/default.aspx/KB/972036

  Thank you, and in what concerns:

  I. Suuresh Kumar-Microsoft Support.

  Visit our Microsoft answers feedback Forumand let us know what you think.

• Report the user in Question TMS Cisco CDR

  Hello

  Any help with this would be greatly appreciated.

  I know that you can run the RDC in Cisco TMS user report, however, that draws its stats for all users within TMS. Is there a way to group users in a model may be to only run the report on these users?

  Thank you!

  Hello Mike.

  It is not possible to the users group when you run the CDR of the user report, it appears that all users.  The only option I see, you can do this, is to export the report to an Excel spreadsheet and manually group users as you want.

  If this is something you would like to see, you can contact your Cisco account manager and ask them to create a feature request for you.  However, with most devices that this report is based on (ie: video Jabber for TelePresence, EX60/90, E20), most to soon be EOS if not already, I doubt that they incorporate such an improvement.

• Pass the user inserted the URL text box value

  It can be simple. I have a text field by default with the values in the database table, and this table cannot be updated.
  
  Now when the user enters a value in the text field and press the submit, url that generates the button should have the value that has been entered by the user, not the database table?
  
  How can I make this possible?
  
  Thank you
  San

  Just create a button which is to submit a (not the redirect URL type and not type 'page of this application').

  Create a branch of the page that goes to the desired page and sets values on the page desitnation accordingly.

  As long as the Send button really sends the page, it should end up being updated with the new values of items in session state, and then they must be considered by the management of the page.

• Passing the user name to a recordset with the login page

  Hello

  I help develop a page for one of our courses at our school.  Is it possible that when you create a login form and authenticate on a new page that the user name also get sent to a recordset so that it can be used to fill hidden fields, to other forms on the new page?

  Yes. If you use the built in the behavior of connection DW, DW will put the user name in a session variable. Look carefully in the login code to see what we call this variable. If you use ASP this session variable is called MM_Username. In PHP, there is an equivalent, but I don't remember now how it's called. If the page with the recordset is to display only the data that user, filter the recordset on the username column by using the Session variable setting and enter the name of the session variable in the text box.

• Create the user in question plsql apex

  Hi, I did a form which receives information about a user and I want to create a user from the apex to connect to my request with the information provided in my form, however the user create is not able to connect to my apex application. I already gave my shchema privileges to create users, but I don't know if I have to take a few special considerations to make an oracle apex account to connect. The code that I use to create the user is:
  
  Start
  run immediately "create a user" | : P6_LOGIN | ' identified by ' | : P6_CLAVE;
  end;
  
  Thanks in advance.
  
  Edgar.

  Hello

  What authentication scheme your use of the application?
  Are you sure you like to create users from the database and use the account database to your application?

  You would like to create workspace users (end users, developer).
  http://download.Oracle.com/docs/CD/E14373_01/apirefs.32/e13369/apex_util.htm#BABCFBGG

  BR, Jari

• can not pass the user name and password

  The following code works.
  
  In the file beats,
  
  sqlplus obpmdir/eu1 @c:\*.sql "sd" BIENVENUE1
  
  In the * .sql:
  
  Select & 1 of & 2;
  =================================================================================================
  However, the following 2 files may not work. The command line wonder username and other key variables.
  
  * .bat:
  
  sqlplus sys/password as sysdba @c:\createOBPMusers.sql NouveauNomUtilisateur NouveauNomUtilisateur newpassword
  
  * .sql:
  
  create a user & myusers identified by & password;
  
  grant resources, connect, dba at & grant_myusers;
  
  
  output

  * .sql:

  create user & 1 identified by &2;

  grant resources, connect, s/n to &3;

  output

• DROID: The user new question-bookmarks

  How do you remove favorites

  Do a long press on the bookmark and a pop with the Remove feature appears.

• How to open a session in an application apex of a link to the html page, passing the username and password in the url

  Hello

  I have a html page (can be created by jsp/other technology) where I need to provide a link to an apex application passing the user name and password, so that the user does not have to connect. I tried below, but it shows the login page.

  <! DOCTYPE html >

  < html >

  < body >

  " < p > < a href =" https://Apex.Oracle.com/pls/Apex/f?p=75478:101:0:login:P101_USERNAME, P101_PASSWORD:[email protected], gmail@123 [email protected] , gmail@123 "> my Application < /a > < /p > "

  < / body >

  < / html >

  no idea how to do it?

  Apex 5 / chrome browser / window 7

  Concerning

  Sanjaya

  Hi Sanjaya,

  from a security point of view I would strongly recommend NOT to include a clear text password in an HTML page or pass it through a url!

  But back to your question why it does not work. It does exactly what you say APEX. Go to page 101. If you want to simulate a page you submit must use BRANCH_TO_PAGE_ACCEPT which tells APEX to go to this page, but performs the 'Treatment of the Page' page instead of make. See http://docs.oracle.com/cd/E59726_01/doc.50/e39147/concept_sub.htm#CHDICEDJ

  Here is the correct URL, you must use.

  https://Apex.Oracle.com/pls/Apex/f?p=75478:101:0:BRANCH_TO_PAGE_ACCEPT:P101_USERNAME, P101_PASSWORD:[email protected], gmail@123

  Concerning

  Patrick

• Financial Reporting - the user can access the POV dimensions

  Hello. In collaboration with the 11.1.2.3.700 version. Have a HFM user that can go in HFM and see all members and data (scenarios, entities, customs, etc.) within HFM. When he goes to EN to run reports, however, he has problems with dimensions that are secured in HFM - entity, scenario, (custom) data type. If one of these dimensions is the point of view, they do not show when it displays an overview from the point of view and then the report does not work because there is no selection. If these dimensions are defined in the report (which is not part of the POV), the report runs well.

  There is no preference user limiting POV members and reports are not confined to specific user POV members. Other people can run those reports very well. Also tried to make this user a HFM and the Foundation (which EN) administrator and even there the problem.

  Any thoughts?

  Thank you

  Eric

  Hello. A great co-worker has solved the problem. She used the ManageUserPOV.cmd utility to export users POVs. The user in question had an entry for the missing dimension, so he was never invited to do and reports failed. Imported and supplied the lack of dimension and it works fine now.

  Eric