DROID: The user new question-bookmarks

Similar Questions

• pass the user's question

  HP Pavilion Elite HPE

  Windows 7 64 bit

  Turned off the power to the user account guest but now when the Office will slow down or monitor stops and you wake up and icon is on the screen that says Linda Locked, then under that of an option button that says to change user. How can I get rid of this and return directly to the desktop? Before using the guest account, if I left the computer for a while and came back to use it, just open for the office or the last used window.

  Hello

  Try this:

  Control Panel > appearance and personalization > screen saver > uncheck "On CV, logon screen", and then click OK.

  

  Also perform the following operations:

  Click Start and in the search box, type power options > click Power Options that appear at the top > click on Change Plan settings > select change Advanced Power Options and then select No for the option to require a password on the resume .

  

• Report the user in Question TMS Cisco CDR

  Hello

  Any help with this would be greatly appreciated.

  I know that you can run the RDC in Cisco TMS user report, however, that draws its stats for all users within TMS. Is there a way to group users in a model may be to only run the report on these users?

  Thank you!

  Hello Mike.

  It is not possible to the users group when you run the CDR of the user report, it appears that all users.  The only option I see, you can do this, is to export the report to an Excel spreadsheet and manually group users as you want.

  If this is something you would like to see, you can contact your Cisco account manager and ask them to create a feature request for you.  However, with most devices that this report is based on (ie: video Jabber for TelePresence, EX60/90, E20), most to soon be EOS if not already, I doubt that they incorporate such an improvement.

• Create the user in question plsql apex

  Hi, I did a form which receives information about a user and I want to create a user from the apex to connect to my request with the information provided in my form, however the user create is not able to connect to my apex application. I already gave my shchema privileges to create users, but I don't know if I have to take a few special considerations to make an oracle apex account to connect. The code that I use to create the user is:
  
  Start
  run immediately "create a user" | : P6_LOGIN | ' identified by ' | : P6_CLAVE;
  end;
  
  Thanks in advance.
  
  Edgar.

  Hello

  What authentication scheme your use of the application?
  Are you sure you like to create users from the database and use the account database to your application?

  You would like to create workspace users (end users, developer).
  http://download.Oracle.com/docs/CD/E14373_01/apirefs.32/e13369/apex_util.htm#BABCFBGG

  BR, Jari

• all the toolbars disappeared except bookmarks even the view menu

  I accidentally turned off all the toolbars and Ive looked through google for an hour now and what I stumbled on was not working to get back them.

  ALT dusnt work
  ALT + V dusnt work
  ALT + V, T, M, or wateva it's does not work

  Ive tried the SafeMode ive tried right click in the world ive tried ctrl + each key on the keyboard lol and now im just really bored

  This has happened

  Just once or twice

  == I unchecked all and right click the toolbard except Favorites

  Had been clearer and more complete on what you've already tried, I him have not posted.

  You never know the level of knowledge of the users posting questions here, man. because we cannot read your mind.

• Programs on the user account and the lost files

  Hi all, yesterday I came home after having some holidays and started my pc and when I chose my user, all my files and programs have disappeared, even my wallpaper was by default... So I went to: C:\Documents and Settings\(my user) \desktop and everything was there, so I moved all my important things for the user 'new '... Today, when I chose my user, I go to my former user, with all my stuff and my old wallpaper, but the things that I moved just disappeared... I need help, these things that I've lost are really important...

  Not good.

  You initially suffered a corrupted profile.  When this happens, Windows compensates by logging in with a temporary profile that is deleted when you disconnect you.  What you should do at this point is presented in one of the following articles:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >
  or, Alternatively,.
  "How to copy data from a corrupted to a new profile in Windows XP user profile"
    <>http://support.Microsoft.com/kb/811151 >

  What you did instead was to move all your data in your temporary profile that is deleted when you disconnect.  You must be disconnected, that's what happened.  Files passed.  So, your best alternative is to this point to restore your files from your backups.  ('Very important' things are always saved).

  If you have no backups, then you learn now why they are needed.  You should immediately stop using your computer/drive, remove the drive and take it to a professional that can recover deleted files.  You can also (on another computer), you can search the Web for programs that can be used to recover deleted files accidentally.  Sorry, but I can offer no recommendation on such programs.

  Sorry and HTH.
  JW

• Financial Reporting - the user can access the POV dimensions

  Hello. In collaboration with the 11.1.2.3.700 version. Have a HFM user that can go in HFM and see all members and data (scenarios, entities, customs, etc.) within HFM. When he goes to EN to run reports, however, he has problems with dimensions that are secured in HFM - entity, scenario, (custom) data type. If one of these dimensions is the point of view, they do not show when it displays an overview from the point of view and then the report does not work because there is no selection. If these dimensions are defined in the report (which is not part of the POV), the report runs well.

  There is no preference user limiting POV members and reports are not confined to specific user POV members. Other people can run those reports very well. Also tried to make this user a HFM and the Foundation (which EN) administrator and even there the problem.

  Any thoughts?

  Thank you

  Eric

  Hello. A great co-worker has solved the problem. She used the ManageUserPOV.cmd utility to export users POVs. The user in question had an entry for the missing dimension, so he was never invited to do and reports failed. Imported and supplied the lack of dimension and it works fine now.

  Eric

• How can I import Firefox bookmarks, now stored in the folder of the user on the same PC (new), in Firefox?

  How can I import Firefox bookmarks, now stored in the folder of the user on the same PC (new), in Firefox? I exported my old PC Firefox bookmarks in a folder [Windows 8] on my new PC.
  When I use the ease of importing from Firefox, it will only import a bookmark at a time - and then it inserts the bookmarks all the main pages on the site marked with a bookmark, not just the one I initially put bookmark. Also, it does not matter the information stored in the bookmark tag.

  Sure thing.

  1. Open the dialog box run by pressing the Windows key by pressing R
  2. Type of %appdata% in the immediate window and press ok
  3. Open the Mozilla folder
  4. Open the folder of Firefox
  5. Open the profiles folder
  6. Copy the folder that is located in this folder on a USB
  7. Install and run Firefox on the new computer
  8. Closing of Firefox
  9. Repeat steps 1 to 5 on the new computer
  10. Open the folder that you copied from your old computer
  11. Copy the contents of this folder into the folder inside the folder of the profile on the new computer
  12. Allow Windows to replace all records in doubles with those you are copying to the computer is prompted

  If you have problems with these instructions, or if you would like more information, feel free to comment below.

• Easy question: router WRT54G: how to rename the user and give a new password?

  Not very computer, but following the recommendations in the FAQ, I have reset my WRT54G router to the default settings by hitting the reset buttong and entering into the Web site. I got a new computer and I forgot the old password. After reset to defaults now the link is not secure. How can I go about renaming the user and giving it a new password of my own - it was a while that I have configured the router, and I don't have the CD. Any help that you can offer or the direction you can piont me is appreciated.

  Try to proceed as following:

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...

  For wireless settings, follow these steps: -.
  Click on the Wireless tab
  -Wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...
  -Set the channel 11-2 wireless, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...

  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything... Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings...
  Please note the 1 WEP key as it comes to the security key for the wireless network...

  Click the settings advanced wireless
  Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...
  Now let's see if you can locate your wireless network and try to connect...

• With the help of a Bank of questions can I ask for a new attempt to a question if the user gets hurt first time

  What I want to do is-

  The learner is asked a question from a Bank of questions - the questions are all the short answer questions (all are numeric responses only)

  If the learner type the right answer - all good and learning proceeds to the next question in the question Bank and is awarded 1 point.

  If the learner Gets the wrong answer, I want the learner to be presented at the same issue, but now the learner has a multiple choice question/answer.  This response has 1/2 a point if it is correct. Learner proceeds to the question in the question bank.

  If the learner chooses the wrong multiple choice answer as they are reset to 0 (zero) points and proceed to the next question in the question bank.

  Is the highest possible or am I being too adventurous, with a Bank of questions?

  I guess I'm looking to give to the student a second chance and try again the question however provide a different format for their response

  I am using Captivate 8

  Thank you

  Question banks do not give you this level of control.  If your questions were NOT in a Bank of questions you can use advanced Actions to redirect your learners to a slide of specific question based on their response.  But you can't do that with question pools.

• Customization of the user interface in 4beta2: hide the button new tab

  Question

  I have another type of problem with Firefox

  Description

  I want to know how to hide the button new tab especially when (be precise)
  tabs [[overflow = "true"]
  I tried to change this code:

  .tabs-newtab-button {
display: none
}
  but during overflow the new tab button appears again.
  Maybe this isn't the right place for these issues, I still need a solution

  Version of Firefox

  4.0b1

  Operating system

  Windows 7

  User Agent

  Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; B 1 RV:2.0) Gecko/Firefox/4.0b1 20100630

  Plugins installed

  • -Shockwave Flash 10.1 r53
  • 4.0.50524.0
  • Adobe PDF plugin for Firefox and Netscape "9.3.3.

  Try:
  #new-tab-button, .tabs-newtab-button {
display: none;
}
  You can also drag the new tab button in the window customize (view > toolbars > customize)

• questions about the message of the user

  I use TS to run a sequence of audit scope nor and want to display measurement in the user interface developed with LV I want just fresh my chart of waveform of the user interface after a measurement is complete if I use the method postusermessageex as file attatch. The question is that the will of the user interface does not not to this message and I think that something is wrong with my UI code. Anyone can pls look at my code and give me suggestions, thank you very much.

  A brief look at the code, I noticed the following:

  • It seems that you are passing in the SequenceContext to the UIMonitor reference, but the UIMonitor expected an applicationManager reference.  You must pass this (a reference to the current applicationManager) in your sequence instead:

    RunState.Engine.GetInternalOption (InternalOption_ApplicationManager)

  
  
  • In addition, you will need to change the reference to applicationManager in your monitor to a reference rather than a container activeX (otherwise you will create a new instance of the applicationManager).  The best way to proceed is to change it to a constand, then return to a control.

  I am unable to run your code due to lack of dependencies, then please let me know if you still have problems after the implementation of the foregoing.

• I have created a new domain with win2012r2 and created users. Add after the client in my area so that the newspaper with the user I get error below.

  Hello

  I have created a new domain with win2012r2 and created users. Add after the client in my area so that the newspaper with the user I get error below.

  "You cannot connect because the logon method, you use is not allowed on this computer, please, see your ad min for more information network"

  Please help me with that and I don't want to give permission to admin for all users group...

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Why our local DNS server, discount Internet user if the user insert new internet address?

  We have a local DNS server that has a strange problem. If a user insert new internet address DNS will cut this internet user. So every time that the user want to insert the new internet address that he must fix his connection and then refresh the browser to display the page.

  How can I fix this error?

  Hi Saman,
  first things first... more information is needed to correctly diagnose your problem.
  When you post a question please include at least the system operation, error message, and what happens when the issue appears.
  Second, server or business systems problems most will be better suited to Microsoft's Technet forum.
  Try this link below for search/post:
  http://social.technet.Microsoft.com/search/en-us/?query=DNS%20Server&refinement=112&AC=3
  B Eddie

• How can I remove the user name and the image of Windows XP new Start Menu

  Two questions:

  1. How can I delete the user name and the image of Windows XP new start; and

  2. my computer keeps asking me to press the F1 key to start Windows.  How to skip this part?

  Thank you.

  Hello

  The image of user account can be removed by disabling the Welcome screen. Or, by opting for the classic Windows theme. Follow the method described in this article, if you want to remove the user name and the picture in the Start Menu, without disabling the Welcome screen and Windows XP theme.

  For those who want to delete the user name and the image of user account from the Start Menu, in order to have a blue white Panel at the top, try this:

  Registry warning
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

  Step 1:

  a. start Windows Explorer and go to this folder:
   
  C:\Documents and Settings\All Users\Application Data\Microsoft account images

  b. in this folder, rename the BMP file that corresponds to your user account.
   
  (For example, if your user name is Robert, rename Robert.bmp to old_Robert.bmp)

  c. then rename the following folder:

  C:\Documents and Settings\All Users\Application Data\Microsoft account Pictures\Default pictures
   
  to something else, for example,.
   
  C:\Documents and Settings\All Users\Application Data\Microsoft account Pictures\No_Default images.

  Step 2:
   
  To remove the user name, follow these steps

  a. Click Start, click "RUN" and type "regedit.exe" and navigate to this key:
   
  HKEY_CURRENT_USER-Software-Windows Microsoft\------CurrentVersion-policies-Explorer

  b. in the right pane, the value NoUserNameInStartMenu-value data 1.

  c. close Regedit.exe and restart Windows.

  You'll find yourself with a blue area at the top of the Start Menu.

  Regarding the pressing 'F1' to start Windows, you have made no changes or was there a system crash after which the problem started?

  You may need to change the boot sequence in the BIOS to the default settings. I recommend you contact your PC vendor for this.

  Warning of the BIOS:
  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.