Black line on the left side of the page

I have a HP Laserjet 1018. The toner is old, there are about 3,000 pages.

These days, I saw a black line on the left side of the page. The rest of the page is fine - faded streak.

I took the toner and it has shaken for a few seconds, from one side to the other, but who has no good.

Any recommendations?


HP LaserJet p1102w

1018 manual says that when this happens, the old toner drum is scratched and insert a new. I did, and the line has dissappeared,

OK, there was more Ink toner, left, but after 3, 000-plus pages, I can live with having to replace it.

Tags: HP Printers

Similar Questions

  • Black lines across the page

    Each page that print includes a greyish black line.  How can I eliminate this line?

    Hi BlueEyedPea,

    Your printer would require an intervention... If you get the patches even a photocopy of his problem with the printer... You can try to clean the cartridge of the printer and see if it solves your problem else, you need to get in touch with your retailer of printer...

    Remove the cartridge and try clean and then align.

    Check out: http://support.dell.com/support/edocs/systems/prn942/en/om/942_om_en.pdf on how to align the cartridge.

    I hope this helps.

  • disorder of the copy or scan, just the shows up as vertical black lines on the page

    I have a HP Envy 120 printer all-in-one.  It prints very well.  But when I saw something to copy, it's just all black vertical lines.  No light in the scan bar.  I had HP replace my printer with a new printer and the same thing happens.  Anyone have any ideas?  I have a laptop with Windows 7.  Have used the printer for 5 or 6 months, but use only a few times a month, so did not notice a problem immediately the Copier.  Spent 4 hours on the phone with technical support who said first the version of the firmware to put up-to-date, but he was able to complete correctly.  He suggested that I had a surge in my wall connection, but that wouldn't make much sense given that I had just plugged the new printer to try and nothing else on this decision was having problems...

    Hi teropt. Reset of the printer and plug it directly into a wall outlet are a very important step to do if you do not have.

    This document covers troubleshooting for "Copies or Scans have vertical strips of black Pages or lines:
    http://support.HP.com/us-en/document/c03733649

  • the presentation of the screen on my monitor is slightly off center with a thin black line on the left hand side. Ho can I fix this. I am running Windows 7 with a monitor Samsung SyncMaster SA10

    The presentation of the screen on my new monitor is slightly biased with a thin black line on the right hand side which makes it awkward hitting the back button on the upper left side of the screen. How can I adjust this?  I am running Windows 7 on a new Compaq PC with AMD Vision and monitor Samsung SyncMaster SA10.

    Any suggestions to adjust welcome.

    Thank you.

    The monitor must have menu on the side or the bottom buttons - in the find menu where you can adjust the horizontal position of the image.

    Increasing or decreasing the horizontal value will move the image left or right. When it is centered properly, you can exit the monitors.

  • Incoming Fax page, left thick black line down the side edge

    Hello

    I recently bought a HP Photosmart 7520 printer and had to return because of a wrong switch ON / OFF the printer.  So I returned and bought another. This second printer works perfectly so far!  However, when I recieive a fax, the page has a very thick Black Line crosses the length (less than an inch from top and down) on the left edge. It almost seems to be a template for a fax page?  The first printer (a returned) did not do that, but it does not appear on the second printer.  In addition, the original page fax I sent to my friend and he said, that it doesn't have a thick black line on the fax page, he gets... and then he sent me along a return fax with this black line appears.

    Comment of thoughts,

    SyBerGuy

    Hello

    For more than a week since my last post. And I also had the printer connected to an outlet of power strip surge protector (never needed to connect directly to a wall, which I would have if I had a problem).  The problem has been resolved by replacing the large black ink cartridge, which was not printing text.

    In addition, earlier when I check the ink level, he showed the graphics still about 1/4 rest in the cartridge. I had also previously clicked on tell me when the ink level is low. None of this happened?  So now I have to watch closely what is printing a page of text clean/good.

    So for now, the printer is good to go and I hope not to have more problems... thank you for your help!

    Sy

  • Black lines on the right side of the printed document Hp 8600 N911g

    I have problems with my HP 8600N911g.  I have several vertical black lines on the printed page of right hand margin.  This only happens when I copy or scan. Printing from my pc is fine.  I did all the cleaning, cutting for over an hour and reset to factory default.  NOTHING WORKS.  Help, please.  I love the printer hp but tire of their problems, which are few, but when they occur, they are doozies.

    I am on Windows 7

    Hi peggymay.

    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

    Sorry to hear that you are having problems with black lines on your scans or copies.  I had this problem myself on my 8600 very clean and I was able to get it to be resolved. The question arises in fact from two locations and with a little luck, we can get this problem solved for you. First thing to look at is under the hood of the scanner. Lift the cover on the left of the large scanner glass and scanner, you will see a small strip of glass. Take a glass clear cleaner and a lint cloth and clean the small glass placed as well as the large glass. On the underside of the lid, you will see a white plastic strip. Please clean it as well. IF you have already done these steps please proceed to the next step.

    The printer power cable must be connected to a wall outlet and NOT a power strip/Bar. HP printers have built in surge protector and if you have it plugged into a strip/Bar, the printer will NOT get all the power needed for the proper functioning and it will cause problems with scans or copies, and it might even generate false error messages on the printer screen.

    Please try these steps and if they work, fantastic. But if they are not, please do not hesitate to write me again.

    I thank very you much for your time.  Always happy to help.

  • Why does my HP laserjet 1022 produced a black line on the right side of the page?

    Why does my HP laserjet 1022 produced a black line on the right side of the page? This occurs by using Word 2003, Photoshop, Acrobat etc. I don't get this with my Epson printer. My printer drivers are all to date. OS = Windows 7.

    Hello dqmcg

    Have you checked programs and OS - seemed to be OK, so did a new install of the printer. I have seems to now work OK - IE the files previously printed with lines now don't (only verified although some).

    I think that I was naïve in beliving Windows when he says that the printer and the driver were OK, and when I did a re-driver installation, Windows just used the file I already had. Also the "print test page" printer properties was always OK. Must have been very slight damage to the driver who showed up only with certain types of files of a few (different) programs.

    Thank you very much for getting my brain to work and begin to think logically.

  • Small black lines on the sides of the integrated video Youtube

    I joined a number of youtube videos in a simple html doc. Most of them seem to be good, but there are 2 has a slight black line on some of the edges. I really need them to be crispy like the others. The video on YT doesn't have those same black lines. Anyone know how to remove these?

    http://www.intellicom-analytics.com/jcuundergrad.html (The right side of the first video and both sides of the last video)

    Note: I am not owner of the videos YT incorporated is not possible to change them at this end.

    Thanks in advance!

    The black lines are the result of a mistake in setting the original size video/video proportions. And these line are visible in the original YouTube videos... especially a problem in the image of "post" that appears before the beginning of the video. See here:

    http://www.YouTube.com/v/y5uVqOuMdCw?version=3&autohide=1&showInfo=0

    and here:

    http://www.YouTube.com/v/na1e9uLImIU?version=3&autohide=1&showInfo=0

    The lines have nothing to with your video player on your page or you can correct it by changing your Web page... the lines are part of the video itself.

    To correct this problem, you must perform a new rendering of the original video file... NOT the Youtube file, but the original.

    If the player holds the original aspect ration (width to height), the video will be resized to fit the dimensions of the player... but if the player is not big enough or wide enough... the black bars appear... that aren't black bars but space empty that the video did not cover. Black bars on the sides of the clip mean that the size of the screen is not big enough. Black bars on the top/bottom, means that the screen is not wide enough.

    These black space "bar" can also be introduced during the editing process if the dimensions of the screen are not properly defined... which seems to be the case here video moose.

    Best wishes

    Adninjastrator

  • 6500 a black line on the right side when I copy

    I have printer hp 6500 has only when I copy I have a black line on the full length of right on the paper even when I copy a blank sheet

    Hi danpk,

    I understand that you are having problems when you perform a copy.  I'll take a look at the document below.

    Copy quality

    Let me know how it goes.

  • How to remove a black line between the two parts of the scanned image?

    Hello

    I scanned a drawing I did a long time ago.

    But given that the paper is too large for the scanner, I had to do two scanning. I wanted to join these two parts as in Photoshop.

    I loaded the left side of the drawing.

    I changed the size of the canva so the second part could be put there.

    I loaded the part right of the drawing and copied and paste it on the canva of the left side of the drawing.

    But whatever I do, I can see a vertical black line where the left and right hand reach. On the contrary, where the right side starts, it seems.

    Could someone tell me (or direct me to a tutorial that tells about) what to do in this case?

    Thanks in advance for your answers.

    This isn't under file, Scripts, but under file, PLC.

  • How to get rid of the black lines on the printed and scanned documents

    When I print, copy or scan on my officeject 6500 wireless I get a black line to the bottom of the page.

    While I wait for your answer, I'll post the most likely cause:

    Lift off the cover.  Now lift the document feeder cover, it opens to the left. You will see the mech feeder, you want to raise that to the left as well, it will increase by 2 inches or more. See this article from underneather glass it? Clean it. Really good.

    Then see you the white piece of plastic above the glass, which clean really good too.

    If it is a perfectly vertical line, in that it's probably caused by some dirt here, what is happening is the seat of bulb scanner in one place, the paper is then slipped over in the same place. If there is a grain of dust, it covers the entire page, top down. You clean the white room because there might be dirt there, when the bulb shines through the paper, he thinks returned as a dark spot.

  • Thick vertical black line on the entire length of the page

    I have a HP LaserJet M1530 MFP Series PCL 6.  When I print normally there is no mistake in the image, but when I make a copy I have a thick vertical black line on the entire length of the page. The black line is about 2 inches from the left edge of the page. The problem is older than the current drum cartridge which was just replaced a couple of months. Never, the problem occurs with a normal printing, copy only and occurs with every copy without exception. Does anyone have any ideas/suggestions?

    Hello somedudeand welcome to the Forums of HP.

    I'm sorry, but to get your question more exposure I suggest posting in the trade forums since it is a commercial product. You can do so at http://h30499.www3.hp.com/hpeb/ .

    I hope this helps!

  • LaserJet M451dw: black line to the bottom of the page

    When I print a document, a continuous black line appears in the middle of the pages. The first 2 pages are normally well, but the rest of the pages have the black line.  I cleaned the printheads etc.  I hesitate to change the ink because there is more than half a cartridge left in all colors.

    It sounds like a faulty black toner cartridge.

    After printing open access toner and remove the cartridge and look at the drum and if there is a black line on the drum, then it would prove.

    If you have half left toner cartridge is still in warranty and you may be able to get it replaced.

  • HP Officejet 6500 Wireless-black line down the copied sheet

    With the help of HP Officejet 6500 (E709n). When the automatic document feeder, copying copies resulting dating a (thin) continuous black line from the top of the sheet for any length, to 1 3/8 "from the left edge of the worksheet. Line does not appear when you copy directly from glass. Am not able to determine a way to access a possible source of problem (most likely a dirty friction roller). The original user manuals do not address this problem. Search for a solution. Thank you

    Hello lentill24.

    Please, see this document.

    http://support.HP.com/us-en/document/c01612462

    See you soon!

  • There is no such thing as a black line on the content of folio in the viewer adobe after update.

    Several days after an update of a shared folio in the viewer Adobe (iPad Retina), there is a black line on the content on the right side of the screen (possibly a the scroll bar that no scrolling). There was also a notification that an update was available (downloaded very quickly, no updates had been pushed in days). This line does not exist when you use the Office Viewer, non-retine iPad or iPhone.

    Please see other threads on the subject.

    It is currently under review

    This seems to be a problem with Content Viewer (v32.5) in the App Store.

    If I build one from the App 32.4.4 Constructor (same v32.5), the bar is in its original position.

    Not a solution, but could be a workaround for some until this problem is corrected.

Maybe you are looking for