Similar Questions

• Error in the new thread should terminate execution

  Hello

  I have a labview VI (continuous while loop), getting initialized in the subsequence of Initialize section of the main sequence and running in the new thread. An error in the execution of this loop will stop execution of VI, pass the error to Teststand and out the thread. I need to put an end to the execution of the main sequence, when the error event in the new thread (passing initialization). Is it possible to do? I'm getting the popup of error Standard Teststand, when the error event, but when I choose to cancel/Abort, the execution of the main sequence doesn't stop and continues. What is the right way to handle errors for threads running in parallel?

  Thank you best regards &,.

  Juvin Ronny

  Some approaches.

  1) wait on the new thread periodically with a wait with a timeout step zero and "timeout causes error" box unchecked. If the thread is finished and has an error, the step of waiting spread the main thread of the error.

  (2) call the Execution.Terminate () or Execution.Abort () of cleaning up your sequence newthread.

  Hope this helps,

  -Doug

• Set title for the new thread

  Hi guys,.

  I have created a new thread, but do not know how setTitle for her, this is my code:

  public class MyThread extends Thread
      {
  
          String htmlString = "
  ABG
  Definition
  ";
          public MyThread()
          {
  
          }
          public void run()
          {
              try
              {
  
                  ByteArrayOutputStream output = new ByteArrayOutputStream();
                  Base64OutputStream boutput = new Base64OutputStream( output );
  
                  output.write( "data:text/html;base64,".getBytes() );
                  boutput.write( htmlString.getBytes() );
                  boutput.flush();
                  boutput.close();
                  output.flush();
                  output.close();
  
                  BrowserSession bSession = Browser.getDefaultSession();
                  bSession.displayPage( output.toString() );              
  
              }
              catch( Exception e )
              {
                  System.out.println( "Exception: " + e );
              }
          }
      }
  

  and this is my screen when starting the new thread:

  

  

  Threads have titles.

  If you are referring to your HTML content, why don't use you the title tag and see what happens?

• How to pass parameters to Date on the data model

  Hi all
  I try to pass parameters of date on the data model and unable to pull all the data. When I tried hard-coded in the SQL query, it works. Here is the data model, can I pass parameters directly to the dataquery?
  I searched a lot but couldn't find it. Any help is greatly appreciated.
  
  <? XML version = "1.0" encoding = "WINDOWS-1252"? >
  < name of dataTemplate = "AIMS_VDIS_VALIDATION_REPORT" description = 'Invalid records in the GOALS and for the given date VDIS' version = "1.0" >
  < Parameters >
  < name of the parameter = "p_start_date" dataType = "date" / >
  < name of the parameter = "p_end_date" dataType = "date" / >
  < / Parameter >
  < dataQuery >
  < SQLStatement instance name = "T4" >
  <! [CDATA [SELECT pgw_custom. Account_Validate (acct_new) invalid,
  acct_new,
  DECODE (pgw_custom. Account_Validate (acct_new), 0, 'ACCOUNT OF OBJECTIVES not VALID', 'VALID OBJECTIVES ACCOUNT') message
  Of
  (SELECT DISTINCT SUBSTR (acct, 1, 3) |) JE_CAP | SUBSTR(ACCT,8) acct_new
  Of
  (SELECT the jav.jav_hours hours,
  ACCT GCC.concatenated_segments,
  GCC.code_combination_id ccid,
  $ (bua.hourly_rate * jav.jav_hours);
  CASE WHEN (um.class2 IN (' a ',' B', 'C', d ', 'E', 'F', 'G', 'H', 'I', 'J', 'K', 'L', ',' n, 'O', 'P', 'Q', 'R', 't')) THEN '3201'
  WHEN (um.class2 IN ('Z', "ZA", "ZA1', 'W', 'U', 'V', 'X', 'Y',"ZA2","ZB","ZC","ZD", the from ')) THEN '3301 '."
  END je_cap
  OF pgw_custom.jems_aims_vehicle jav,.
  Apps.mtl_generic_dispositions mg/d,
  Apps.gl_code_combinations_kfv gcc,
  mfour.unit_main@m4prg01 uh,.
  BUA mfour.bill_unit_acct@m4prg01
  WHERE jav.jav_glaccount = mgd.segment1 AND
  MGD.distribution_account = gcc.code_combination_id AND
  JAV.jav_vehicle = um.unit_no AND
  UM.unit_id = bua.unit_id AND
  JAV.jav_project IS NULL AND
  JAV.jav_task IS NULL AND
  JAV.jav_charge_date BETWEEN: p_start_date AND: p_end_date AND
  GCC.detail_posting_allowed = 'Y' AND
  GCC.enabled_flag = 'Y' AND
  NVL (gcc.end_date_active, TO_DATE('31-DEC-4720','DD-MON-YYYY')) > = SYSDATE AND
  SUBSTR (bua.billing_code, 1, 1) = "I" AND
  ((bua.eff_dt < = (SELECT date_fin)))
  OF apps.gl_periods
  WHERE period_name = (SELECT TO_CHAR(:p_end_date,'MON-RRRR') FROM DUAL)) AND
  BUA.end_dt IS NULL)
  OR
  (bua.end_dt >(SELECT start_date)
  OF apps.gl_periods
  WHERE period_name = (SELECT TO_CHAR(:p_end_date,'MON-RRRR') FROM DUAL)))
  ORDER BY valid, acct_new]] >
  < / sqlStatement >
  < / dataQuery >
  
  < dataStructure >
  < group name = "G_ACCTS" source = "T4" >
  < element name = "VALID" value = "valid" / >
  < element name = "NEW_ACCOUNT" value = "acct_new" / >
  < element name = "MESSAGE" value = "message" / >
  < / Group >
  < / dataStructure >
  < / dataTemplate >

  the parameter name must be

  p_start_date
  p_end_date

  And when the report is run, a value must be selected in the settings. Try this default sysdate.

• Comparison of the data in the new thread in parallel with the hand

  I have a file of main sequence. Overall, I got a call from sequence that initializes an oscilloscope and returns to the hand. Next main action, I have the user turn on power supply and confirm with a popup message. My question is now, I need to create a new thread before action "light food" for the oscilloscope intercepts all overloads and continues to record. So if this is the case, what I'm trying to do is:

  Call sequence Initialize oscilloscope

  Call sequence oscilloscope Fetch

  Message Popup, power supply turns on, confirm with "OK".

  -Now, since the user disabled on food, I need compare all data, even while the user turns on the power and clicks "OK" and after.

  So, I need an oscilloscope running in parallel and by comparing data during execution of the main sequence. Any help would be appreciated.

  The type of call sequence step has an option of a sequence of sub in a new thread.

  Call sequence Initialize oscilloscope

  Sequence oscilloscope Fetch call (call in a new thread and it will acquire signals until it gets a signal to stop to the main following)

  Message Popup, power supply turns on, confirm with "OK".

  Delay if necessary

  Set the signal to stop the thread close.

  I hope this helps.

• How to close a pop-up open running in the new thread in Teststand without manual intervention?

  Hello

  I'm keycycle in infinite while loop. There are two ways to break out of the loop

  1. click on the 'OK' button on the pop-up that says "complete the event. The pop up is running in a new thread.

  2 increase the value of the parameter "Reset_Count".

  If I choose the first way the sequence runs completely, but if I choose the second way then execution gets stuck in cleaning and waiting for me to click on the button 'OK' Popup.

  So my question is, is there any way by which I can close the popup without manual intervention?

  I have attached the seq, in case you want to see exactly what is happening.

  Thank you

  Hello.

  Yes, replace the TestStand popup a dialog box with custom of LabVIEW.  Here are my first thoughts on a simple method...

  a.) replace the TS popup with a LabVIEW dialog box.  The LabVIEW dialog box contains an OK button and a loop waiting for an LV notifier.  Simply wait for the notifier of LV (with a timeout of 100 ms) as well as the OK.button.

  Then when you get your external reset to end the test, create an another VI to SET the alert (with data as a Boolean value) system to stop the dialog box.

  Let me know if this can work.  I could put something togther for example, if any.

  Thank you
  PH

• When you try to create the new thread in a discussion forum, the browser closes and I'm back in the office.

  I tried to create a new thread in a Discussion forum.  Closing the browser window and I was back on the desktop.  I did a system restore, which not only does not solve the problem, but deleted my internet security software.  Has worked with people of tendency to reinstall the software, but I get a message tht says: «Unable to extract the installer...» ».  I have a class of the internet this week and I need this computer.  Can someone please?

  You can undo the last restoration of the system using: http://www.vistax64.com/tutorials/76256-system-restore-undo.html.  This may fix your problem with security software that has uninstalled when you did the system restore (using a date that probably existed before the installation of trend).  I don't know if it works now that you have done other things to try to reinstate the program, but it's worth a try.  I sincerely doubt that this process could help with the problem of browser (and there not so undo it reverses your efforts).

  You use Internet Explorer?  If so, please repost your question in Forum Internet Explorer: http://social.answers.microsoft.com/Forums/en-US/InternetExplorer/threads where the IE specialists will be more than happy to help you with your problem.

  If you are using another brand of browser, please repost your question in the Forum program: http://social.answers.microsoft.com/Forums/en-US/vistaprograms/threads where experts in programs other than Vista or IE will be more than happy to help you with your problem.  You can also try to go to the web site of the Explorer and contacting their technical support staff (or post on a forum if they support a).

  Only trend can help you with installation problems you encounter through their program.  Perhaps it didn't uninstall completely during the restoration of the system.  Check if the trend has a removal tool and use it to uninstall the program, then try to re - install again.  If this does not work, you will need to work with their technical support to solve the problem.

  I hope this helps.

  Good luck. Lorien - a - MCSE/MCSA/network + / A +.

• Pass parameters Dreamweaver user to a new user on the same computer

  8.1 window / 64 bit / Dreamweaver cc2015

  I had to create a new user on my computer. How can I transfer my site definitions, extensions, shortcuts, workspaces, etc. my new user?

  Thank you

  Joe

  Backup and restore site definitions Dreamweaver: Adobe Dreamweaver Team Blog and/or helps Dreamweaver | Import and export site settings Dreamweaver

• Step failed in New Thread does not display in the report

  Hello

  I call a sequence of sub in a 'new topic '.  A step inside this sequence of subroutine fails.

  The end result is the Test failed because it is supposed to be, but the step failed does not show.  (I show not only failed in the report).

  Can it be fixed?

  Thank you

  Rafi

  It is correct. If you look at the entry Point of the execution of the process template, you'll notice that once completed execution of the main sequence, the generation of reports and other things start.

  If spawn you a sequence in the new thread from the main sequence, MainSequence could finish before the subsequence ends its execution and the results of the sous-suite propagate to MainSequence. So as Ray mentioned, you can force the MainSequence expect the subsequence full run using a queue time.

  See attached screenshot and/or example:

  

• Start a new Thread in the activate() method

  Hello

  When my application is started or resumed after a phone call etc... I would like to perform some tasks in the activate() method. First of all, I would like to start a new Thread to call web services a bit, and when it's done, I would like to update the user interface.

  I tried to do. I created a new class that extends the Thread in the run() method, I placed all the relevant web service calling and code in the method activate() my main thread that I have done:

  MyThread myThread = new MyThread();

  myThread.start ();

  But I noticed that nothing seems to be done. So I simplified my code by removing all web service of the run() method calls and replaced by a wait method (500), followed by a method call to update the user interface (in this case it creates just a new ButtonField, just for testing purposes).

  But ButtonField never gets created.

  The new thread doesn't seem to be from all.

  Any suggestions?

  Thank you very much.

  Have you tried setting stop and monitoring of execution points using println?

  First of all, is called same activate()?

  Secondly, run() is reached?

  When the thread does the work of the user interface, if you have that in a synchronized block try block invokeLater rather.

• Pass parameters to the box of the HTML form to a stored procedure

  I'm always looking for a solution to my problem of forms. For the record, I don't use Express applications to create my application - I use PL/SQL right. I need to know how to pass parameters from the box to my Web form. I welcome people select one or more checkboxes in a form that calls a remove function to delete the selected records. What I read in Oracle of the "Guide to the developer of database applications - Fundamentals" is not useful to me. If someone could tell me some examples, maybe I could see what I'm doing wrong. Here is what I wrote in "the developer of database applications - fundamentals Guide ':
  
  All the boxes with the same NAME attribute are a group of checkbox. If none of the boxes in a group is selected, the stored procedure receives a null value for the corresponding parameter.
  
  If a check box in a group is selected, the stored procedure receives a single parameter of VARCHAR2.
  
  If more than one check box in a group is enabled, the stored procedure receives a parameter with the type of PL/SQL TABLE OF VARCHAR2. You must declare a type like this, or use a pre-defined as OWA_UTIL. IDENT_ARR. To retrieve the values, use a loop:

  CREATE OR REPLACE PROCEDURE handle_checkboxes ( checkboxes owa_util.ident_arr )
  AS
  BEGIN
  ...
  FOR i IN 1..checkboxes.count
  LOOP
  htp.print('<p>Checkbox value: ' || checkboxes(i));
  END LOOP;
  ...
  END;
  /
  SHOW ERRORS;

  I'm not sure that understand what your question is.

  If your web form has the following defined all with the same name:

  one
  two
  three
  

  You create and save a procedure to manage the sending of a form that contains a parameter with the name of attrib type owa_util.ident_arr for example:

  create or replace procedure handle_form(attrib owa_util.ident_arr) as
    iter number;
  begin
    for iter in attrib.first .. attrib.last loop
      -- do something with attrib(iter)
    end loop;
  end;
  /
  

  Now, the only problem with this Manager (or any other), is that if the user selects any of the boxes, or no value for the parameters expected, the Manager called with parameters missing or with on all of the passed parameters, as well as the call will error.

  To move, you need to provide default values for all parameters passed to your handler such as the settings of ident_arr, but with ident_arr settings, it's hard to do with autonomous procedures. If you place your procedure in a package you can define variables of package-level of the appropriate types that can be used as default values:

  create or replace package my_web as
    empty_arr owa_util.ident_arr;
  
    procedure handle_form(attrib owa_util.ident_arr := empty_arr);
  end my_web;
  /
  create or replace package body my_web as
    procedure handle_form(attrib owa_util.ident_arr := empty_arr) as
      iter number;
    begin
      for iter in attrib.first .. attrib.last loop
        -- do something with attrib(iter)
      end loop;
    end;
  end my_web;
  /
  

  now, when you hit in the situation where the user does not select the checkboxes, the call to handle_form will be no reviewable error on due to missing parameters, and the empty_arr will not have all the elements to iterate over so the loop in the body of the procedure will be fine and you will be able to retrieve each value of the checkbox selected attrib table when you iterate on it.

• Start a new thread once a screen is shown.

  Hello

  I need to initialize a database after the first display of my application is showed, and I can't find the way.

  What method of screen I can use to do this?, I tried onUiEngineAttached, but this start the new thread before show the screen and it shows once the thread.

  I tried this also

  public public static void main (String [] args) {mainapp to PAP = new MainApp();

  theApp.enterEventDispatcher ();

  }

  /**

  * Default constructor

  */

  public MainApp() { final HomeScreen screen = new HomeScreen();

  pushScreen (screen);

  Executable task = new Runnable() {}

  public void run() {}

  DataBaseManager.init ();

  UiApplication.getUiApplication () .invokeLater (new Runnable() { public void run() {}

  screen.showTaskEnd ();

  }

  });

  }

  };

  New Thread (task) .run ();

  }

  But it shows the screen after run the new thread.

  How can I do this? any ideas?

  Thank you

  start a new thread within invokelater works very well.

• invokeLater or new thread?

  The problem, I need to finish 3! Days. SOS! (...__...)

  notesDecoder is a decoder to analyze each note of a byteArray, is Runnable.then do 2 thingsask the tone and the animation of the corresponding key plays.

  When I use UiApplication.getUiApplication () .invokeLater (notesDecoder), each note plays at the normal rate, the screen won't play the animation; When I use the new Thread (notesDecoder) the sound goes very quickly, the animation plays in random. appreciate if any advisess...

  invokeLater runs on the event Thread, so effectively, this means that there is only a single server running all the requests.  So they will be executed sequentially., but because you run on the thread of events, the screen can not be updated.  If your animation will not work.

  In your situation, I suggest that you need to play all notes using a single Thread that is NOT the EventThread.  One solution is to create a queue for a Thread notes play, and this Thread just takes a note, he plays, takes the next note, he plays and so on.  Each note has an animation, you must read this animation and must achieve to execute on the event Thread, but your one Server Thread should not move the next note until the animation is complete.  So you will need some kind of interface listener to the treatment that you run on the event Thread to run the animation.

  This is possible, harder to explain to do, I hope you understand!

• Redirect to the new page of pl sql / process page?

  Hello

  I'm working on a page with a form for users to download the data.  When you press the "submit" button, it runs a process Page.  After the process is complete (i.e., to insert a new record of DB) we need to create a branch to a new page with treatment notes (defined in the process).  I tried to save the notes to an item on the first page and then configure a branch that fires "to submit, after treatment...". ' and includes notes in the industry, setting the value of an item on the new page.  It works in part but seems to truncate the value of the notes.  Is there a limit to the length of the string that can be passed via a branch page?

  Or is there a better way to do it?  Maybe there is a way to branch directly in the process?  If so, it would be easier because I wouldn't have if all goes well define a page element, just to pass this value along to the new page.

  Thank you

  Steve

  Hi Steve. 1234555 - Oracle,

  Agree with the suggestion of fac586:

  The value of the item on the new page can be defined directly in the process, or later without including the value in the branch (make sure that the direction is not clear the session state in the target page). Even better would be to give notes a structure to put them in a collection and displays them using a report.

  Here's how you can do if your process is PL/SQL:

  DECLARE
  
    L_NOTES VARCHAR2(512);
  
  BEGIN
  
    -- process for insertion and setting notes
  
    -- setting notes item on page to be branched
    APEX_UTIL.SET_SESSION_STATE('P2_NOTES', L_NOTES);
  
    -- redirecting/branching to the page
    APEX_UTIL.REDIRECT_URL (
        P_URL => 'f?p=' || :APP_ID || ':2:'|| :APP_SESSION ||'::NO:::' );
  
  END;
  

  Reference:

  • APEX_UTIL. SET_SESSION_STATE
  • APEX_UTIL. REDIRECT_URL

  I hope this helps!

  Kind regards

  Kiran

• Passing parameters to the URL - availability in the new process of request

  Hello

  I am able to pass parameters in the URL of the APEX that defined the points of the application as below

  : http://application-tier server: port/pls/apexdev/f? p = 1001:1:APP_CLIENT_NUMBER, APPLICATION_NUMBER:0001285, 0000051:

  I would like to get and set other items based on elements of application passed as parameters. I would like to only enter once application.

  I found the best place for this action in a process of application with Point on new Instance of Process.

  The problem seems to be that the value of point of application has not been set at this point, and therefore the values are null.

  If I change the application process process Point to something that runs to each page as On Load: after the header, then the values are available. It is not suitable as only wish to run once at startup of the application.

  I can't find discussion of this documentation.

  1. I would be able to access URL parameters in the application process with Point on a new Instance of the process?

  2. are there any other equivalent task for access to URL parameters at the start of the application?

  Thank you

  Hello

  APEX runs only on the new process Instance when a new session has been set up. As you discovered, URL items are not yet saved in session at this point State. You can use a level app process before header instead, with a condition that makes that make it run when certain elements that you want to initialize are null.

  Kind regards

  Christian