Password control a dominio en WS2008R2 users

Similar Questions

• My control panel shows only one user, but when I start it shows two users on the logon screen. and I know no other password

  My control panel shows only one user, but when I start it shows two users on the logon screen. My user is an administrator. But I do not know password of another user. I am currently using as an administrator. But I also want other user password. Answer please

  Your machine has only two accounts: admin and guest. I saw a few messages before which the poster makes an additional account on the log on screen that does not exist. Since there is not, it cannot be used.

  Also note that you play a game at high risk, having only one administrator account. This forum deals daily with posters including one and only the admin account went bad for one reason or other. Something about it now while you can: create, test, and document a spare, even admin account that you have a spare emergency House key.

• Satellite M70-129: user password controls access to the system at boot

  Hello

  1. from Toshiba Assist (password utility) I put the supervisor with string (text boards) owner password and then I put the user with chain owner password. But during startup BIOS only prompt you for the user password and his Rosary of owner. User mode many BIOS options are disable including the HW installation option.

  2. when I click on Toshiba HWSetup, he invites supervisor password. But if I get the supervisor (not 100% sure) password, it says invalid password. I also tried to change the Toshiba supervisor password, password help utility but failed.

  3. in the meantime due to virus attack, I had to reformat my laptop with Toshiba Recovery CD, sacrifice all my data. I bought this laptop in a few months.

  4. How can I completely remove the BIOS supervisor password and user. Help, please.

  Hello Anas

  You are right. If there is no possibility to remove the password, the service partner for this but it costs a bit.

  Otherwise I put t agree with you on the common problem on Satellite models, because it is a very serious thing and I really t think Toshiba may allow something like that to happen. If it's truth can you imagine what turbulence will be on the market, or perhaps to the press. I put t really believe in this theory.

• I have a HP Mini and I get password control failed... Fatal error... System stopped... CNU92262D5.

  I have a HP Mini and I get password control failed... Fatal error... System stopped... CNU92262D5. Can someone tell me please how to unlock this computer?

  Thank you

  Hatcherr.

  This happens rarely.

  Run your code and it's the same thing.

  E letter

  9 number

  L - letter

  O - letter

  7 number

  7 number

  G - letter

  7 number

  T - letter

  Q - letter

  All lowercase letters.

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• I have a HP Mini and I get password control failed... Fatal error... System stopped... CNU9284C8B

  I have a HP Mini and I get password control failed... Fatal error... System stopped... CNU9284C8B.

  Please help with the password. Thanks in advance

  Hello

  Enter: e9lo7uveup (3rd character is a lowercase L)

  Kind regards

  DP - K

• I accidentally typed my password for the account of the user to an unencrypted page

  original title: password security

  I accidentally typed my password for the account of the user to a page that is unencrypted. The response was that the username password is incorrect, so I broke down and disconnected.  I'm worried that the password has been clearly displayed, but do not know with certainty

  Hello

  Probably won't matter if you change your password.

  Hope that helps.

• I have a HP Mini and I get password control failed... CNU9455B0P (BzeroP)

  Any help would be greatly appreciated.

  I have a HP Mini and I get password control failed... Fatal error... CNU9455B0P (BzeroP) system

  Hello

  Try to enter: e9lovqqp12 (3rd character is a lowercase L)

  Kind regards

  DP - K

• How to disable control panel access to other users

  I would like to set up a Windows 7 Pro machine so that the administrator or the Administrators group can access the control panel and disable other users to access.  So far, I can use GP to disable all access or allow access for ALL, but not to be selective in who I grant access.

  Thank you.  These items were not what I was looking for.

  That's what I needed.

  http://www.SevenForums.com/tutorials/101869-local-group-policies-apply-all-users-except-administrators.html

• Win 7 PPTP (or any other Protocol) is programmable to allow access remote password controlled in a SINGLE folder to one or more remote users?

  I would like to be able to implement several specific files of the user records.  These records would be 'personal' for the engineers involved.  Each folder must be accessible on the server ONLY by the particular engineer using its own agreed password.

  For example: I would like to 'Sam', whose password is "lucky76" to be able to access the c:\luckysam]*.* folder, and no other on the server.
  Similarly, I would like to "Mary" with password "frienship7" to be able to access the c:\friendship\*.* folder and not others on this server.

  I know how to set up PPTP, but this does not seem to allow this kind of 'multiple file user protected access'.  Am I missing something?  Is there another protocol that would operate in the manner described?

  Thanks for the suggestions and help!

  Joe

  Hello

  As computers are on a domain network, I suggest you to report the issue in the TechNet Forums, networking Windows 7: http://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/threads

  Thank you.

• Control Panel - you cannot change user access privileges

  Today visited a customer who was a profile error at startup of Windows 7 (Home Premium).

  After a lot of unexpected problems, I found that the built-in Administrator account seemed to be missing (!) but I was able to create a user base at the command prompt, by using "net use XXX / add". Tried to add this user to the Administrators group, but it does not (unfortunately, with no error message).

  When I started, I could open the Control Panel, but when I tried to change the new user (for an admin), I was invited for an admin password, but the following option to change the user's privileges did NOT appear. Using the basic account for access to the regedit failed (as you know), but he confirmed that there are a couple of profiles on the machine, which has fewer values than the other.

  The cat of the user, it turns out that the PC was a buying opportunity, and he had also been in the hands of another, who had attempted a repair (after a failed upgrade). The user doesn't have to believe that the PC had been through Windows updates in the recent past.

  Thus, the result is that there are now 2 user ID Windows on the PC, a (Administrator) who gets an error in profile and a second (standard user) that allows to perform basic operations.

  I don't check the 'Guest' Windows built-in account, but I'm sure that (from what I've seen in a few hours) that someone in the past had just set a "standard" on the box and then eventually renamed account built-in "Administrator" as the user name.

  I don't like leaving my clients with no answered questions weigh on their PC, but this one has me relatively perplexed.

  My questions are:

  -is it possible to rename (or otherwise damage) on behalf of the default Windows administrator?

  -which might explain why the control panel will not allow you to change the type of the user?

  -If the account are accessible on the PC with administrator privileges has become corrupt, is the only viable solution to proceed to re - install Windows?

  Thanks in advance...!

  -is it possible to rename (or otherwise damage) on behalf of the default Windows administrator?

  -> Why would you damage the default admin account?

  -> Rename an account is superficial. You give only the existing account, a nickname, but the name remains behind.

  -which might explain why the control panel will not allow you to change the type of the user?

  -> With the help of an ordinary user plans to promote some administrator-level accounts is against the principles of security. This would make the concept of "account administrator" without value. You need to be logged under an administrator account to perform administrative actions.

  -If the account are accessible on the PC with administrator privileges has become corrupt, is the only viable solution to proceed to re - install Windows?

  -> With a used PC, the only viable option is to perform a destructive factory restore to make the machine 'as new '. It would be dangerous to use the PC in its current state. There could be more that a dog has fleas or virus it could be hacked that will create an interesting situation when the user deals with sensitive information (Internet banking, personal correspondence).

• I have a network drive. & Passwords, I want to force their users to log in there every time and do not use the last name of user and password.

  I have a network (an Iomega iconnect nas) drive. I want to force their users to log in there every time and do not use the last name of user and password. They can change it in control of card-how can I make sure they. I'm only using Windows 7 as standalones (with lan), there is no server connection

  Hello

  I suggest you post the same question in the TechNet forum and check if it helps.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• Username and password - control of the database

  Hi guys,.
  
  I just installed Oracle 11 g Release 2 on my windows 7 64-bit OS, the installation went correctly. However, when I went to the control of the database, its request enter me username and password well I'm not what he was referring too. I need to create the user name and password if so where can I create it.
  
  Please help me it's urgent
  
  Thank you
  
  D

  Hello

  No..
  username to console 'em
  sys
  password that gave you intallation
  And connect sysdba

  If you want that the credentials of the host
  username
  Administrator
  password your password for the operating system.

  Hope this helps
  Daniele

• How to kill an Open Directory - password be reset when the first user login

  Hi all

  I've been running on this issue for some time now, however, I finally got tired of it. I want to set a password policy, but the option 'Reset password on the first login of the user' completely kills OpenDirectory.

  Running OS X Server 10.11.3 and 5.0.15, although this has happened also in versions of Yosemite. This case is a new and clean installation in a virtual machine. Only OpenDirectory and appropriate DNS are enabled. DNS was fully configured by the Server app when you set the hostname and checks in the Terminal.

  I created a few test users OpenDirectory and confirms that I can not connect with them. Can I put another option in the strategy of password very well, however, the minute I turn on 'reset the password on the first login of the user', my OpenDirectory is ruined.

  I'm unable to add new users, I am unable to change passwords, policies of previous password, I had set is no longer working. That is, the user cannot change password when you sign in for the first time. Correct password is entered, but shakes the login window when you try to configure the new password.

  Error returned once the OpenDirectory gets watered is "Mode is not supported by the node directory. Not only is the directory watered, but it becomes difficult to even remove or disable the hella service.

  Someone at - it ideas? I really want to enable this feature so that I'm not creating a temporary password for users, then relying on them to change themselves.

  Thank you

  It always seems to be the case - the diradmin account gets completely borked. Have you already found a way to define this strategy successfully?

  This command will unlock the overall strategy and restore the account, so you can use OD once again, but it's just a solution, not a solution.

  sudo pwpolicy - n /LDAPv3/ldapi://%2Fvar%2Frun%2Fldapi clearaccountpolicies

  See Doc Apple here...

  OS X Server (Yosemite): Global policies can lock the accounts of administrators - Apple Support

  I can't believe that there is a document like that but still no fix from Apple? Really? I must have missed something. I really need this password policy to work...

• Is there a picker control available dates in the user Web interface Builder?

  I'm looking for a date picker control to use in the Web user interface designer.  Any suggestions?

  Hello

  If you try to select the date, then using web services won't be much help, unless there are only certain dates that can be selected. You are looking for something similar to the Dates of arrival and departure on the Web sites of airlines?

  Kind regards

  Greg H.

• How to set up parental controls for access on a user account?

  How can I set up a parental block on user accounts

  Go to: Control Panel, Internet Options, content tab, Access Manager, Enable.

  Check all the tabs and choose your preferred settings.